Collection: PWC Parts & Supplies

First landing in Japan! This is a cleaning item made specifically for jet skis and boats that was born in California. Different colors have different uses to keep the hull beautiful.

Yellow is an oil cleaner that is ideal for areas with heavy oil stains.
Made with a special surfactant and alkaline builder that does not harm engine metal parts, it can easily and quickly clean oil and grease from solvent tanks, etc.
Also available for wheels, rims, and inboard/outboard motors.

[Contents] 473ml
[How to use] Spray directly on the area you want to clean and leave for 60 seconds.
Then wash it off with a high-pressure washer.
If a high-pressure washer is not available, use a soft brush, etc. to scrub and rinse.
*Do not use on aluminum parts or anodized parts. It will damage the paint.
*Do not leave it on the surface or allow it to dry. It will damage the paint.
*Be sure to test it in an inconspicuous place before use.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.If swallowed, drink a glass of water and seek medical attention immediately.
4. If it gets into your eyes, immediately rinse with plenty of water.
5. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

KAWASAKI
750SX
800SX-R
800X-2

●Lightweight flywheel weighing 800g.
●The response of engine revving and rotation return is improved, so acceleration from 0 to 1m is significantly improved, making it a must-have item at the start of a racing scene.
●Improved from previous products to increase durability.
●Compatible with CDI-10R/CDI-R power unit, and when installed at the same time, the pickup will be improved and the response will be linear with throttle work. The strength of the gear has also been increased.
●Compatible with battery ignition CDI, so it can be used with KAWASAKI 800SX-R (A2~)/800X-2 with genuine CDI.

【please note】
Since the stator is removed during installation, there is no charging function.

[Compatible models] KAWASAKI STX-R / Ultra150
[Specifications] Compatible with regular gasoline

This is a purely domestic CDI unit, and we have researched the engine characteristics of STX-R/Ultra150 to achieve the best ignition characteristics.
Easy to install and shortens the time to reach top speed from low speed.

[About installation]
Bolt on.
*Please set according to the engine specifications and driving conditions.

[Adaptation] 46mm to 48mm MIKUNI
[Quantity] 1 piece

This gasket has higher performance than the genuine product.
Special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, the gasket uses a metal material, so there is no tearing during maintenance!
Manufactured using a special manufacturing method, it has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

Used when installing electrical equipment or changing wiring.
Superior waterproofness compared to conventional products.

[Quantity] Male/female x 10 each

■Material: T bolt, nylon nut all made of stainless steel

[Product specifications]
■Tightening range/clamp width/quantity

JL52-635714: 63.5~71.4mm / 19.0mm / 1 piece
JL52-826905: 82.6~90.5mm / 19.0mm / 1 piece
JL52-11431222: 114.3~122.2mm / 19.0mm / 2 pieces
JL52-15241651: 152.4~165.1mm / 19.0mm / 1 piece

Definitely recommended for models with a supercharger.
Traditional hose clamps will collapse if you tighten them too much, and fall out if you don't tighten them too much...
There was such a problem, but the tightening torque can now be managed.

With heavy duty high torque clamp,
Boasts torque performance more than three times that of normal worm gear clamps.
It is mainly used in exhaust and intake areas where vibration is likely to occur.
Tighten the T-bolt with a lock nut, so you don't have to worry about it coming loose.
It also has a structure that tightens the hose evenly, so you can grip the hose firmly.

The bolts and nuts are also made of rust-resistant SUS.
The nut uses a stainless steel nylon nut that is hard to loosen.
Adopts a ROLLED-EDGE design (R processing on both ends of the band makes it difficult for the hose to get wedged).

■Material: Stainless steel

[Product specifications]
■Size/Quantity
JL51-110133: 11.0~13.3mm / 10 pieces
JL51-155185: 15.5-18.5mm / 10 pieces
JL51-194226: 19.4~22.6mm / 10 pieces
JL51-224256: 22.4~25.6mm / 10 pieces
JL51-256320: 25.6-32.0mm / 10 pieces
JL51-436500: 43.6~50.0mm / 10 pieces
JL51-700780: 70.0~78.0mm / 10 pieces

Clamp using a special tool (product number: CH-207).
The clamping capacity is much greater than that of normal tightening clamps.
Used in SEADOO superchargers and important parts that must not come loose.

■Material: Stainless steel
■Quantity: 5 pieces
■Size: 90-110mm

Compared to standard stainless steel clamps, there are no holes in the groove (zebra-like),
You can apply more tightening torque than standard clamps.

This hose has a special coating applied to its surface.

[Product specifications]
■For water (*no oil allowed)
■Size: Inner diameter/thickness/length
JL40SHL19RD: 19mm /4mm /1m
JL41SHL13RD: 13mm /4mm /1m
JL40SHL8RD: 8mm/4mm/1m

■Maximum pressure resistance for regular use 5kg/cm
■Regular heat-resistant temperature ~180℃

●JL399 holder set belt and hook only.
●Convenient for simply lashing luggage onto the rear deck seat.
*It cannot be used on boats with a curved gunwale as the hook will be misaligned.

【set content】
Lashing belt (metal part made of stainless steel) x 1 piece
Gunwale hook (aluminum poly coating) x 2

●Contains 10 female terminals.

●Compatible with SEA-DOO [Genuine product number: 710000837 710000836].

[Quantity] 2 pieces
This is a pin blind seal.

3Pin
The terminal is a set of 3 male and female pins each.
This is the same type of coupler used by KAWASAKI and YAMAHA. *

Specifications: 3Pin
Color: black triangle

The terminal in the photo is a set of 3 male and 3 female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

3Pin

The terminal in the photo is a set of 3 male and 3 female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

This is the same type of connector used for genuine wiring such as KAWASAKI.

■Coupler: 1 set of female and male
■Pins: 4 each

[Compatible models]
KAWASAKI 750(B)/800

An indispensable item for crank maintenance and racing scenes.

Made using the same material as the normal one and made it even stronger.
The balance of the crank is the best.
■Made in Japan

*With big end bearing and small end bearing sold separately.

[Compatibility] YAMAHA 650/700/760
[Quantity] 1 piece

Compared to the genuine base gasket, the surface has been specially processed to improve sealing performance.
Special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, the material of the super base gasket is metal. Therefore, there is no tearing during maintenance.
This is a high-performance gasket that is more economical than genuine products.

[Applicable models] KAWASAKI 650/750/800

●It has better vibration absorption properties than the genuine product and has improved sealing.
●This gasket is more economical than genuine products.
●It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.
●Top grade gasket made in Japan

[Compatible models]
KAWASAKI Kawasaki 750/800(A1)
800SX-R (2003) JS800A1,
750SXI (1995-97),
750SX-A1・JS750B1/B2/B3,
750SXI-PRO(1998-2002)JS750C1-5

●Also compatible with normal engines.
●Because it is a reinforced coil, it is tougher than normal, and the price is more reasonable than normal.
●Compatible with genuine product number 21003-3732.

Used for joints of independent wiring in campers, trailers, etc.
The main body can be fixed, and can be easily attached and detached with one touch.

●Cable used
Core diameter: ~5mm (17sq)
Allowable current: 50A

[Adaptation] KAWASAKI 310/300 series
ULTRA310X / ULTRA310LX (-'21) / ULTRA310R / ULTRA310X-SE
ULTRA300X/ULTRA300LX
(There is one extra wire when using 300)

*Not available for 250/260/LX series

[Product name] LIMITER CUT LIMITER CUT

You can release the speed limiter and experience the original top speed with simple connection and installation. Since the stock ECU is used as is, you can enjoy it easily. You won't lose cruise control functionality either.
■With instruction manual

【important】
●This product is planned and manufactured for competition purposes (especially closed races).
●We cannot guarantee any claims regarding the hull, engine, etc., so please be careful when using this product.
●Can be used in conjunction with the separately sold "JL23022 Speed ​​Limiter Cut ON-OFF Switch".

Optional parts for boats equipped with UNLIMITED limiter cut (JL23031)
KAWASAKI ULTRA series 300/310 (-'21)

[Product name] Limiter cut ON/OFF switch LIMITER CUT ON/OFF SWITCH

A 3-way ON-OFF-ON switch allows for normal mode and limiter cut mode.

[Adaptation] KAWASAKI 750/800/900/1100/1200
[Quantity] 1 piece

Paper type gasket.
This gasket has better vibration absorption than the genuine product and has very high adhesion.
It has high compressibility, excellent resistance to stiffness, oil resistance, and antifreeze resistance.

●This is a replacement terminal.

[Product specifications] All stainless steel hose clamp

 ■Material: Stainless steel

■Size/Quantity
7~16mm / 10 pieces
10~23mm / 10 pieces
16~32mm / 10 pieces
33~57mm / 10 pieces
47~70mm / 10 pieces
59~82mm / 5 pieces
71~95mm / 5 pieces
91~114mm / 5 pieces
118~140mm / 5 pieces

Nozzle hose for stainless steel portable cans

■ Total length: 250mm
■Product numbers for which compatibility has been confirmed: JL15006-20, JL15006-25
*This product is shorter than the nozzle hose that comes with the JL15006 stainless steel portable can. Please check the size.

Aluminum cap for stainless steel cans

■Material: Aluminum
■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

JL15001SL Silver
JL15001GD Gold
JL15001R Red
JL15001OR Orange
JL15001LG Lime Green

●Outer diameter: approx. 8mm
●Inner diameter: approx. 5mm
●Length: Approximately 100cm

[Compatible with] YAMAHA 760/700
[Quantity] 1 piece
Ф48

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

[Adaptation] YAMAHA 760/700/650
[Quantity] 1 piece

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

Convenient when removing the battery.

-Size: Belt width: approx. 5cm, total length (circumference): approx. 62cm, diameter: approx. 31cm

[Applicable models] KAWASAKI ULTRA300/310 series
(*Equivalent to genuine part number 16097-0007)

External oil filter

Compared to genuine products, it is cheaper and has better cost performance.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.
However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Compatible models]
●KAWASAKI 4 stroke ALL
*Cannot be used for ULTRA310/300

●YAMAHA 4 stroke ALL
*FZR/SHO/FZS and other hulls with a displacement of 1800cc or more cannot be used. Please use genuine NO.69J-13440-03.
*External oil filter (*equivalent to genuine product number 5GH-13440-30)

●New features have been added to the conventional oil filter.
●A special design that takes into account the oil flow rate and a strong magnet inside the filter effectively absorbs sludge (iron powder) mixed in the oil.
●Installation is the same as a conventional oil filter.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Compatible models] Sea-Doo
SEA-DOO 4-stroke 260/255/230/215/185/155/130 horsepower model (up to 2017)
(*Equivalent to genuine product number 420956741)

*Excluding SPARK 2018 and later models

External oil filter (*equivalent to genuine part number 420956741)

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

■Material: Brass
■Specifications: 1/4 straight (threaded part 13mm: P1.25: outer diameter 13.5mm)

■Material: Brass
■Specifications: 1/8 straight (threaded part 10mm: P0.9: outer diameter 10mm)

■Material: Brass
■Specifications: 1/8 blind (screw part 10mm: P0.9)

When changing the cooling hose routing or adding a bypass line,
Used to close holes that are no longer needed.

This is an adapter used when flushing the engine.

[Applicable] Hose inner diameter 19~20φ
【size】
●Screw: 26mm
●P: 1.75mm
●Outer diameter: 20mm
●Inner diameter: 13mm

[Compatible models] KAWASAKI
ULTRA 310LX/LX-S(2022-)

For ULTRA series other than the above, "J2606-0040" is the compatible product.

● Kawasaki JETSKI genuine hull cover
●Protects your precious hull from UV rays and dirt.
●Ventilation function on both sides allows air to flow easily and prevents stuffiness.
●This product is not completely waterproof.
*Image (actual shape may differ due to use of images of other models)