Collection: PWC Parts & Supplies

SEA-DOO 2018 and later models, 300 and SPARK
(OEM part number: 420666142)

●SGS ignition coil
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

For SEA-DOO 4-stroke 1503 engines * Genuine part number (OEM): 420931130

●SGS Aftermarket PTO Gasket●An inexpensive aftermarket repair part with performance equivalent to that of the original part.

For SEA-DOO 4-stroke 1503 engine
●Genuine product number (OEM): 420950771

●SGS cylinder head gasket
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

For SEA-DOO 4-stroke 1503 engine
●Genuine part number (OEM): 420892735

●SGS piston ASSY (piston & piston ring)
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

Valve Guide

Performance equivalent to SEA-DOO genuine part number (OEM): 420253929 etc.

●Valve guide for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The location used is number 19 in the third photo.

Exhaust Valve
SEA-DOO genuine part number (OEM): 420254682 etc.

●SGS Exhaust Valve●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

*The location used is #6 in the 3rd photo.

Intake Valve
SEA-DOO genuine part number (OEM): 420253163 etc.

●SGS Intake Valve●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

*The location used is number 7 in the 3rd photo.

Valve Spring

Performance equivalent to SEA-DOO genuine part number (OEM): 420838280 etc.

●Valve spring inside for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The location used is number 10 in the third photo.

Valve Spring

Performance equivalent to SEA-DOO genuine part number (OEM): 420238180 etc.

●Valve spring outside for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The location used is number 9 in the third photo.

Valve Spring Retainer

Performance equivalent to SEA-DOO genuine part number (OEM): 420254283 etc.

●Valve spring tensioner for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The location used is number 11 in the third photo.

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable models] KAWASAKI STX160LX / STX160X / STX15F / STX12F

●Billet sponsons

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE3 fishtail

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] SEA-DOO RXT-X300 (2018-2020) / GTX-L300 (2018-2020)

Adjustable sponsons.
The base plate is made from machined aluminum.

Available in 2 colors

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE2 fishtail

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE2

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.
[Compatible models]
SEA-DOO RXT-X300RS (-2017)
RXP-X300RS (-2020)

The base for attaching the wings will be silver.
The base is machined from aluminum for a strong and cool finish, and a flap is attached to the rear of the sponson base, allowing you to adjust settings on the spot to better match the water surface conditions and riding.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.
[Compatible models]
SEA-DOO RXT-X300RS (-2017)
RXP-X300RS (-2020)

The base for attaching the wings will be silver.
The base is machined from aluminum for a strong and cool finish, and a flap is attached to the rear of the sponson base, allowing you to adjust settings on the spot to better match the water surface conditions and riding.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] SEADOO SPARK

【Color】
SE-101038S Silver

*The photo is pink. Note) The actual item is silver.

billet sponsons

The base is machined from aluminum for a strong and cool finish.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●NEW-WIDE (The base is 8mm wider than before, improving running stability!)

●The angle of the side fins can be adjusted steplessly from 0 degrees to -12 degrees with respect to the bottom edge of the sponson plate.

●The protruding amount of the side fins is 25mm from the sponson plate surface.
The rear end of the side fin attachment type sponson plate is cut and the amount of protrusion is reduced.

●Similar to the previous model, the sponson plate can be installed in four positions: up to 24mm in the front and back, and up to 11mm in the top and bottom.

●The flap at the rear end of the base plate can also be adjusted steplessly in the range of 0 degrees to -14 degrees, just like the previous model.
The guideline is engraved, so you can easily adjust the left and right angles.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

●Exhaust nozzle for SE ULTRA310/300/260/250.

●This is a part to make the exhaust port look stylish.

●Exhaust nozzle for SE ULTRA310/300/260/250.

●This is a part to make the exhaust port look stylish.

●Exhaust nozzle for SE 800SX-R / 800X-2.

●This is a part to make the exhaust port look stylish.

●Exhaust nozzle for SE 800SX-R / 800X-2.

●This is a part to make the exhaust port look stylish.

[Compatible models]
KAWASAKI Kawasaki SX-R1500

●Exquisite length and unique shape for straight line stability, top speed, cornering, etc.
Demonstrates mature performance in all aspects.

[Compatible models]
KAWASAKI Kawasaki 440/550

Straight-line stability at high speeds is significantly improved.

[Compatible models]
KAWASAKI 650X2

Straight-line stability at high speeds is significantly improved.

KAWASAKI SX-R 1500 4 stroke

NEW Venturi Gate for SX-R 1500

KAWASAKI ULTRA310LX / 310R / 310X SE / 310X / 300X / 300LX

●Designed to improve water absorption efficiency across the entire speed range while minimizing the impact on top speed, making it suitable for a wide range of uses, from leisure use to racing.

KAWASAKI Kawasaki 15F/ 15S / 12F/ STX-R

●This is an innovative gate that attaches wings to the intake port and attaches the pump to even higher pressure.

[Compatible models] KAWASAKI ULTRA series (250 / 260 / 300 / 310)

ULTRA250X
ULTRA260X/ULTRA260LX
ULTRA300X/ULTRA300LX
ULTRA310X / ULTRA310LX / ULTRA310X-SE / ULTRA310R

[Compatible models] KAWASAKI ULTRA series (250 / 260)
ULTRA250X
ULTRA260X/ULTRA260LX
Genuine post exchangeable handle mount compatible with Kawasaki ULTRA250/260.
I remade it by tapering it from the bottom to the center. Easy to install, just replace the normal post.
Not only is it easier to operate, but it also makes the area around the handle look cool.

SE-027013 (Suitable for handlebars of common thickness)
SE-027013F (suitable for thick fat bars)
SE-027013BK (Suitable for handlebars of common thickness)
SE-027013BK-F (Suitable for thick fat bars)

[Applicable model] For Kawasaki 800 X-2 (for freestyle)

●For freestyle The height is 10mm higher than the normal one, and can be adjusted backwards within a range of 20 to 30mm.

[Applicable model] For Kawasaki 800 X-2 (for racing)

●For racing (race specification)
Height is 50mm lower than normal and can be adjusted backwards within a range of 15-25mm.

[Compatible models]
Kawasaki Kawasaki
750/800 engine All
[SXi-Pro / 750SX etc. / 800SX-R / 800X-2]

- Machined aluminum flywheel engine cover
●The surface has a beautiful finish with anodized coating.

【please note】
*The separate oil supply model cannot use the oil pump, so it will be a mixed specification.

[Applicable model] SEA-DOO

RXT-X 255(2008-09)
RXT 215(2008-09)
RXT(2005-07)
GTX-LTD(2005-08)
GTX155(2008-09)
GTI SE 130(2007-10) /GTI SE 155(2007-10)
WAKE 215(2007-08) /WAKE 155(2007-10) /WAKE(2005-06)
*WAKE can be used with the pole removed.

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.
*This model is only available in black

[Applicable model] SEA-DOO 3D

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.
*This model is only available in black

[Applicable model] SEA-DOO FISH PRO155 (2019)

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*Stitching and band colors vary depending on arrival time and manufacturer. Please note.

S-16B black limited

[Applicable model] SEA-DOO
SPARK 2-up(2014-19)
SPARK 2-upTRIXX(2017-19)

[Material] Polyester material

In order to protect the body, the inside uses long fiber non-woven fabric to protect the fiber part of the hull.
This is a high quality cover made in Japan, from the fabric to the sewing.

1. [Tape] Colored tape is used to make it easier to see the front when hanging the cover.
2. [Backing] The mirror part is lined with non-woven fabric to prevent scratches.
3. [Handle] The handle part is also reinforced with double layers of fabric.
4. [Buckle] Securely secures the hull with one touch

[Disclaimer]
*The color of the stitch, tape, and band may change depending on the arrival time.

S-14B black
S-14S Silver

[Reason for outlet sale] Special price to replace inventory.
*In rare cases, the box may be torn or the paint may peel off (see image).

*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
*We cannot answer inquiries regarding product specifications or compatibility based only on the information provided.

[Compatible models] Seadoo 950

[Compatible models]
YAMAHA FZR FZS

●Mirroless camera for a stylish and lacy look.

[Compatible models] YAMAHA Yamaha SJ (2021 and later models)

PRO series sponsons.
You can change the position to suit your riding.
Achieves agile cornering.
The stability of the corner grip is also outstanding.

[Compatible models] YAMAHA
GP, FX, VXR, VXS series. Please see below for details.

[Compatible models] YAMAHA
●2020～
[GP] GP1800R SVHO

●2020-2021
[FX] FX SVHO / FX LTD SVHO / FX HO (1.8L)
[FXCRUISER] FX CRUISER SVHO / FX CRUISER HO (1.8L)

●2019
VXR (1.8L) / GP1800R SVHO
[FX] FX SVHO / FX LTD SVHO / FX HO (1.8L)
[FXCRUISER] FX CRUISER SVHO / FX CRUISER HO (1.8L)

●2016-2018 VXR (1.8L)
●2017-2018 GP1800
●2011-2016 VXS (1.8L)

PRO series sponsons.
Achieves agile cornering.
The stability of the corner grip is also outstanding.

[Compatible models] YAMAHA
EX (2017-)
EXR

PRO series sponsons.
You can change the position to suit your riding.
Achieves agile cornering.
The stability of the corner grip is also outstanding.
Fins can be adjusted to 4 levels

[Compatible models] YAMAHA SHO ('12-)/SVHO/FZS ('14-)
2012-2018 FX CRUISER HO (1.8L)
2012-2016 FX SHO (1.8L)
2012-2016 FX CRUISER SHO (1.8L)
2012-2018 FX HO (1.8L)
2014-2018 FX CRUISER SVHO
2014-2018 FXSVHO
2014-2016 FZR
2014-2016 FZS

●PRO series sponson.
●You can change the position to suit your riding.
●Achieves agile cornering.

[Compatible models] YAMAHA SJ (2021 model)

The intake gate is the part that allows water to flow into the pump case.
It has the effect of improving the grounding to the water surface.

[Compatible models] YAMAHA FZS SVHO (14-16)

This is the part that serves as the inlet for the water flow that sends water to the pump.
It has the effect of improving the bite on the water surface.

[Compatible models] YAMAHA SJ (2021 model)

Improves top speed and handling performance.