Collection: accessories

This is a rear seat cover from the Unlimited "LOGO" series.
To install, simply hang it on the rear seat top.
It is made of chloroprene, the same material used in wetsuits, so even if the surface gets wet, water will not soak through to the back. It is a great item to have when you go out for outdoor activities such as marine sports or camping, or when you go out with children or pets.
The seat won't get wet even if you ride in a wetsuit.
The underside is made of skin material, so it's not only waterproof but also stays in place even if you get in a hurry.

It is also very convenient because if you hang it from the trunk space side, it can be used as a dirt-proof cover for the back space.
It can be rolled up and stored, so it can also be used as a cylindrical cushion or pillow.
It can also be used as a dirt-proof cover for trunks, a flat sheet for outdoors, or a cold weather sheet. The fabric is not too thick.

This product will protect your car's seats from not only marine wear but also sweat, dirt, and wear and tear caused by pets after various field sports.

■ Surface: Chloroprene ■ Back: Slice Skin ■ Size: W125 x H130cm

*Because the material is stretchy, there may be an error of about ±1 to 2 cm during the manufacturing process.
*The image of all seats being occupied is for illustrative purposes only.

[How to care for neoprene fabric products]
- As this is a delicate fabric, do not use a washing machine, dryer or bleach.
-If you need to wash it, we recommend hand washing with fresh water or neoprene detergent.
-There may be creases when you open the product, but this does not mean the product is defective.

A key chain to prevent small items such as keys from being submerged in water.

The soft foam body also functions as a buoyant body, so it doesn't feel like a foreign body even in your pocket.
Even if it is floating in water for a long time, it is coated with vinyl so it does not absorb water easily.

[Compatible models]
SEA DOO All models

[Material] Polished stainless steel

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x24mm
Hook part: Width 136mm x 87mm x 40mm
Weight: Approx. 345g

Luxurious stainless steel buff mirror finish!
Replacing the cheap genuine hook will definitely improve your visual appearance!

[Compatible models] KAWASAKI
STX160 series
ULTRA series
STX series

[Material] Stainless steel polished

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x28mm
Hook part: Width 136mm x 34mm x 48mm
Weight: Approx. 351g

Luxurious stainless steel buff mirror finish!
The visuals will be upgraded by replacing the cheap genuine hooks with polished ones!

[Compatible models] SEA-DOO ST3 Hull
*RXT-X300/GTX-L300 '18 or later

[Quantity] 1 set of 10 parts
[Material] Stainless steel
[Thickness] 1.5mm

Washer used for the seat base engine cover of SEA-DOO ST3 Hull series.
Prevents digging into the genuine engine cover when tightening it, making it ideal for accent parts!

[Applicable models] KAWASAKI ULTRA300/310 series
*Can be used for models other than ULTRA by drilling holes.

【please note】
*This fitting includes
"Kawasaki Genuine Adapter" and "Flash Adapter UL18000" cannot be used together because the pitch is different.

[Applicable models] KAWASAKI ULTRA300/310 series

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.
Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), wear and tear on the threaded part will be eliminated compared to the genuine product (made of resin).

[Size] ■Mounting space φ56, ■Processed hole 34mm, ■Hose piercing outer diameter 18.5mm, ■Inner diameter 12.5mm
[Installation] Can be used on models other than ULTRA by drilling holes.

[Compatible models] YAMAHA 700SJ ('96~)
*For RULE bilge pump only

[Accessories] 8 rivets

[01689]:500[97033]:800[01608]1100 Stay when installing bilge pump.
Two bilge pumps can be installed.
Bilge pump holder [12-1116] can be installed in 45 degree increments.

[Compatible models] KAWASAKI
Exhaust diameter Ф50mm
15F('09-)/ULTRA250X('08)/ULTRA260X/ULTRA LX('09-)

★The following model with exhaust port diameter Ф60mm is part number: JL14001.
STX series ('00-'07) *Excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300X/ULTRA LX('07-'08)

●Produces a stylish rear exhaust.
●Machined from aluminum (A6061) with excellent strength and corrosion resistance.
●Cover flange with chemically polished alumite processing and excellent design.

[Compatible models] KAWASAKI
JL14001: Exhaust port diameter Ф60mm
STX series ('00-'07) *Excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300/310/ULTRA LX('07-'08)

★The following model with exhaust port diameter Ф50mm is part number: JL14002.
15F('09-)/ULTRA250X('08)/ULTRA260X/ULTRA LX('09-)

●Produces a stylish rear exhaust.
●Machined from aluminum (A6061) with excellent strength and corrosion resistance.
●Cover flange with chemically polished alumite processing and excellent design.

[Compatible models] SEA-DOO
GTX-4TEC / RXT / RXT-X(-08)

Luxurious stainless steel buffed mirror finish.
Upgrade your visuals by replacing the cheap genuine hook with a polished one!

■Correspondence:
KAWASAKI 4 stroke model
SEA-DOO 4 stroke model

■Application: Tool to apply lubrication to the throttle body to prevent it from sticking.

●A must-have item for those riding in seawater!
●Inject lubricant to prevent the throttle body from sticking.

[About installation]
It is necessary to make a hole in the intake pipe using a drill. Install it in front of the genuine throttle body.

[Application] KAWASAKI 750/800 electrical box [Quantity] Blue 1 piece

By replacing the genuine plastic cap, it becomes an accent of the engine room.
With O-ring

[Compatible models]
■Kawasaki: 750SX / SXi / SXi-Pro / 800X-2 / SX-R series (800SX-R / 1500SX-R)
■YAMAHA: 700FX / 700SJ

[About processing]
[1] When installing on a YAMAHA boat...If using a genuine YAMAHA lock: Machining of the lock part is required. A genuine KAWASAKI lock was purchased separately, and a genuine part lock assembly [27016-3703] was prepared and assembled.
[2] Use on KAWASAKI boats: Disassemble the genuine lock and assemble it to the product.

[Material] Stainless steel buffed finish

Excellent strength! Will not rust!
Replacing the original one will give the hull a luxurious feel and accent, making it more stylish.
The long hook design helps to securely lock the hood and prevent it from coming off.
The hook part can also be used with YAMAHA locks (processing required for installation)

[Note] Only the latch, internal parts of the lock part are not included.

●Exhaust nozzle for SE ULTRA310/300/260/250.

●This is a part to make the exhaust port look stylish.

●Exhaust nozzle for SE ULTRA310/300/260/250.

●This is a part to make the exhaust port look stylish.

●Exhaust nozzle for SE 800SX-R / 800X-2.

●This is a part to make the exhaust port look stylish.

●Exhaust nozzle for SE 800SX-R / 800X-2.

●This is a part to make the exhaust port look stylish.

●JL399 holder set belt and hook only.
●Convenient for simply lashing luggage onto the rear deck seat.
*It cannot be used on boats with a curved gunwale as the hook will be misaligned.

【set content】
Lashing belt (metal part made of stainless steel) x 1 piece
Gunwale hook (aluminum poly coating) x 2

Nozzle hose for stainless steel portable cans

■ Total length: 250mm
■Product numbers for which compatibility has been confirmed: JL15006-20, JL15006-25
*This product is shorter than the nozzle hose that comes with the JL15006 stainless steel portable can. Please check the size.

Aluminum cap for stainless steel cans

■Material: Aluminum
■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

Bent bolt for stainless steel cans

■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

[Compatible models] YAMAHA
VX (2021)
GP1800 (2021)

40 liters of large stern storage significantly increases the VX's storage capacity.

Molded with EVA foam for durability and weather resistance.
The interior has a mesh bottom for quick drainage.
There is a notch in the towing hook part, so you can use the hook without removing the storage.

■With side rod holder (2 locations)
■No tools are required for installation!
■Option (sold separately): VX cooler bag can be installed

*This product is not waterproof.

[Compatible models] YAMAHA
FX CRUISER HO(2021, 2020, 2019)
FX CRUISER SVHO(2021, 2020, 2019)
FXHO(2021, 2020, 2019)
FX LIMITED SVHO(2021, 2020, 2019)
FXSVHO(2021, 2020, 2019)

This FX stern storage is in addition to the FX's regular storage.
It has enough storage capacity to carry everything you need for long trips on the water.
In addition to its capacity of 50 liters, this is a masterpiece that shines with its excellent design.

Molded with EVA foam for durability and weather resistance.
The interior has a mesh bottom for quick drainage.
There is a notch in the towing hook part, so you can use the hook without removing the storage.

■With side rod holder (2 locations)
■No tools are required for installation!
■Option (sold separately): FX cooler bag can be installed

*The hull and product images are used images.
*This product is not waterproof.

●A rod holder that attaches to the base of the BORIKA exclusive clamp mount (BK-FMCG).

●If you attach it to the base of the BORIKA exclusive clamp mount (BK-FMCG), you will be able to use 3 mounts.

●BORIKA Clamp Bearer & Mount.

●Rod holders, camera mounts, anchor locks, etc. sold separately can be replaced.

●As a holder when traveling to a fishing spot, or as a rod holder at a fishing spot.

●Installation is completed by simply inserting the knob nut onto the grab handle. No tools required.

●The direction and angle of the rod holder can be changed.

●In addition to the rod holder, the clamp mount can be replaced with camera mounts, anchor locks, etc.

*Some models such as STX and Spark may interfere with the seat slightly.

Rudder for watercraft or boats.
Easy to get on and off watercraft and boats.
Easy to install and easy to store.

■Total length approximately 1M

[Compatible] For SEA-DOO SPARK
*Equivalent to OEM part number: 278002843

A lanyard that attaches to your vest
It is more reasonable than genuine parts.

[Compatible models]
SEA-DOO
RXT-X300 (2018~)
GTR230 (2020)

●No drilling or other processing is required as it is bolt-on.

●A spring-retractable reboarding step that enhances playability and is convenient when reboarding from the water.

[Compatibility]
GTR230 (2020 and later) / GTI130 (2020 and later)

[Compatibility] GTR230 ('20-) / GTI130 ('20-)

●Convenient for storing small items in the large capacity storage of GTI hull models from 2020 onwards.

●A highly practical item that is easy to carry even when taken off the ship.

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

*A rod holder that can be attached to the optional LINQ COOLER 51L (#269800817).

●Upgrade hardware kit essential for using LinQ bag TUNNEL BAG (product number: 860201740) in seawater.

●LinQ hardware kit includes highly corrosion-resistant stainless steel parts

●Easy and quick installation

*Standard equipment for LinQ Cooler cooler box

[Compatibility]
RXT, RXT-X, GTX and WAKE Pro(2018)

●Convenient for storing small items in the large capacity storage of the ST3 hull model.

●Breathable front storage bin storage bag made of high quality synthetic mesh fabric.

●Equipped with carry handle.

●A highly practical item that is easy to carry even when taken off the ship.

●Quick installation fasteners securely hold bags in storage bins.

●Even more convenient when combined with Storage Bin Organizer (295100733).

[Compatibility] RXT, RXT-X, GTX and WAKE Pro (2018)

●This is a necessary part for installing the genuine SEA-DOO fender (product number: 295100418).

●Snap-In Fenders Installation Kit

●2 pieces/set

*This is for one side, so if you need 4 places on the left and right, you will need 2 sets.

[Compatibility]
RXT, RXT-X, GTX and WAKE Pro(2018)

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Please use it for FISH PRO / GTX models without audio after 2018 or when the audio is broken.

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Convenient for charging mobile phones, wearable cameras, etc.

●This excellent device detects the amount of current required for proper charging time, and prevents devices from overcharging.

●2018 - Standard equipment on GTX Limited300 model.

[Compatibility]
SEADOO SPARK

●A spring-retractable reboarding step that enhances playability and is convenient when reboarding from the water.

[Compatible models]
SEA-DOO SPARK 3-seater

*Ski pylons cannot be used for tubes, etc.

*Cannot be used for SPARK 2-seater.

●This is a necessary part for installing the genuine SEA-DOO fender (product number: 295100418).

●Snap-In Fenders Installation Kit

●2 pieces/set

*This is for one side, so if you need 4 places on the left and right, you will need 2 sets.

[Compatibility]
●SEA-DOO iBR model before 2017 model (*Not required for SPARK)

●Genuine SEA-DOO fender that is ready to be attached and detached

●Fluorescent orange body with excellent visibility

●2 pieces/set

●When using this snap-in fender, a special installation kit must be installed on the hull in advance. (*Not required for SPARK.)

※※ Sold separately ※※
[Compatibility]
●SEA-DOO iBR model before 2017 model
Requires Snap-In Fenders Installation Kit (Part number: 295100550)

●RXT, RXT-X, GTX and WAKE Pro (2018)
Requires Snap-In Fenders Installation Kit (Part number: 295100729)

SPARK since 2016

[Note]
SEA DOO's RFID system (wireless digital encoding security system) is not allowed!
*Programming work is required after purchase.

Genuine safety lanyard

[Disclaimer]
As these are genuine parts, prices may change without notice.

Compatible with SEA/DOO RFID system
(Wireless Digital Encoding Security System)

*Programming work is required after purchase.

Genuine safety lanyard

[Disclaimer]
As these are genuine parts, prices may change without notice.