Collection: Genuine/Aftermarket Parts: Aftermarket parts

●An adapter used when washing engines such as KAWASAKI and SEA-DOO.

●Can be used with Salt Away's dedicated mixer with just one touch.

●A lashing kit for securing stainless steel jerry cans to the rear deck of a PWC.
●Includes a high-grade EVA mat to prevent scratches to the hull when securing the jerry can, and lashing straps.
●The EVA mat is CNC processed and designed to prevent the tank from shifting.
●Both the ratchet and gunnel hook are made of rust-resistant stainless steel.
●Allows for the mounting of a vertical 20L/25L gasoline can (JL15006) on the rear deck.

■Kit Contents
・Gasoline Can x 1
・EVA Mat x 1
・Gunnel Hook x 2
・Lashing Strap with Ratchet x 2

【Installation Notes】
※Approximately 300mm of space is required at the front and back of the deck surface.
※Cannot be used with boats where the gunnel part has an R-shape.

●Jerry Can Specifications
■Material: Body/Stainless Steel Cap/Aluminum
■Size: Width 255 x Length 360 x Height 320mm
■Accessories: Aluminum cap, nozzle hose, vent bolt (all assembled)
■Instruction Manual

Please select your desired prefecture type.

●JCI compatible products (small ship court equipment)
●Contents: 1 set of 2 pieces ●Size: Width approx. 100 x Height approx. 80mm

【Compatible models】SEA-DOO
●300hp models & 2018 and later models (equivalent to genuine part number 420956744)
●260/255/230/215/185/155/130hp models (-2017) (equivalent to genuine part number 420956741)

*Excludes GTI90/SPARK

・・
This aftermarket oil filter offers excellent cost performance at a lower price than genuine parts.
■Accessories: 1 thin O-ring, 1 thick O-ring, 1 small O-ring

【About Oil Filters】
Sludge generated from impurities in fuel and oil, and
metal powder from friction between cylinders and piston rings, etc., are produced inside the engine.
Engine oil washes away these contaminants,
allowing the engine to continue to function properly.

However, over repeated long-term use, engine oil becomes dirty and degrades,
so the filter cleans it to prevent re-adhesion of dirt and degradation.
The role of the oil filter is to maintain the long life cycle of the oil.

[Compatible models] Sea-Doo
SEA-DOO 4-stroke 260/255/230/215/185/155/130 horsepower model (up to 2017)
*Excluding SPARK 2018 and later models

●Genuine part number OEM 420956741

■SGS external oil filter + external O-ring ■This is a set product of oil filter + O-ring.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

■For MIKUNI
■WSM product
*Some items may not have a stamped number depending on the gauge.
*Due to the material, some discoloration that does not affect use may be observed. We appreciate your understanding in advance.

006-9050 50
006-9052 52.5
006-9055 55
006-9057 57.5
006-9060 60
006-9062 62.5
006-9065 65
006-9067 67.5
006-9070 70
006-9072 72.5
006-9075 75
006-9077 77.5
006-9080 80
006-9085 85

GLOVE BOX LATCH

SEA-DOO OEM Part Number: 264000133, etc.

●Glove box latch for SEA-DOO

●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

※The installation location is number 1510 in the 3rd photo.

[Essentials for changing engine oil! ]
●Powerful vacuum sucks up fluids.
●Suitable for suctioning oil, water, etc. in any situation and location.
●It also has a pressure change function with a hand pump, so all you need is space to move the handle up and down.
●When using the handle, pump around 10 times and then continue suction automatically.
In addition, it is equipped with an air valve as standard, so if you have a compressor,
By connecting to an air valve, suction can be performed with increased suction power, so no effort is required.
●Complete equipment perfect for pro shops.
●Vacuum effect is required, such as changing oil in cars and motorcycles, draining water from water tanks, etc.
Can be used in any situation.
-With scale that allows you to see the amount removed at a glance

[Disclaimer]
This product is imported from overseas, so a Japanese instruction manual is not included.

[Included hose size]
Small: outer diameter approx. 5.8 mm (inner diameter 4 mm) x length approx. 82 cm
Medium: Outer diameter approx. 6.7mm (inner diameter 5mm) x length approx. 82cm
Large: Approximately 9.8 mm outer diameter (8 mm inner diameter) x 98 cm length

Tether for YAMAHA

■For MIKUNI ■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use. Please note.

006-9090 90
006-9095 95
006-9100 100
006-9102 102.5
006-9105 105
006-9107 107.5
006-9110 110
006-9112 112.5
006-9115 115
006-9117 117.5
006-9120 120
006-9125 125
006-9130 130

●Sold in units of 1 piece.

Used to adjust the amount of fuel supplied within the carburetor.
The larger the size, the greater the supply.

Product number/size
006-360/1.5
006-361/2.0
006-362/2.3
006-363/2.5

[Applicable] SEA-DOO 4-stroke pump diameter 161mm (for 300/230 horsepower)

● BRP genuine part number 267000917

●SGS Wear●An inexpensive aftermarket repair part with performance equivalent to that of an original part.

[Disclaimer] Product colour may vary depending on time of arrival.

T-shaped
Made of aluminum with a plated finish, it adds a stylish touch to water areas.
The pipe body is also very compact.

■Quantity: 1
■Material: Aluminum

■Please select your desired size.
3/8 x 3/8 x 1/4: Different diameters (Outer diameter 9.5mm, 6.3mm; Inner diameter 7.7mm, 5mm)
3/8 x 3/8 x 3/8: Same diameter (Outer diameter 9.5mm; Inner diameter 7.7mm)

[Applicable models] KAWASAKI 650/750/800
[Quantity] 2 pieces

●It has better vibration absorption properties than the genuine product and has improved sealing.
●This gasket is more economical than genuine products.
●It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.
●Top grade gasket made in Japan

UN standard certified product Fire service law compliant product

Made of rust-resistant stainless steel, it will stay shiny even after many years of use.

●Uses a large handle for smooth operation during refueling.
●The poly injection nozzle can be stored inside when not in use.
●It has three handles with a unique structure, so it can be carried by one person or by two people from the left and right sides.

[Product specifications]

■Material: Body/stainless steel Cap/aluminum
■Size: Width 255x Length 360x Height 320mm
■Accessories: Aluminum cap, nozzle hose, vent bolt (all assembled)
■Instruction manual

[Repair parts] Refueling cap, nozzle hose, and vent bolt (ventilation screw) are also sold separately.

[Compatible models] YAMAHA
SHO / FX CRUISER SHO / FZS / FZR / VXR / HO(09~)
Displacement 1800cc or more
(*Equivalent to genuine product number 69J-13440-03)

●External oil filter

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Information] Please use part number: JL16006 for removal.

When the tension of this spring is weakened, throttle response improves, but it becomes more prone to burning due to vibrations and the like. If it is strengthened, the opposite effect occurs.
As the grammage increases, the tension becomes stronger.

■Quantity: 1 piece

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

Equivalent to genuine parts (OEM part numbers: #295501204 #295501198)

●This is an inexpensive aftermarket repair part with performance equivalent to that of a genuine part.

[Applicable models] SEA-DOO 4-stroke

●Genuine part number (OEM): 278003828 (old part number: 278002822)

●SGS 30Amp relay●This is an inexpensive aftermarket repair part with performance equivalent to the original part.

■ Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■ Operating temperature range: -20℃ to 110℃

Please select the size
NHT08: Outer diameter 8 x 8 x 8mm / Inner diameter 5 x 5 x 5mm
NHT10: Outer diameter 10 x 10 x 10mm / Inner diameter 7 x 7 x 7mm
NHT12: Outer diameter 12 x 12 x 12mm / Inner diameter 10 x 10 x 10mm

●This is Seaflo's manual bilge pump.

●Can be activated using a switch panel or float switch (sold separately).

●Equipped with a removable strainer, so there is no chance of sucking in large particles. Also, cleaning the pump is easy by removing the strainer part.

●Flow rate: 500GPH (31.5 liters/min)

●Power supply: DC12V/3.0A

●Compatible with inner diameter 3/4" (19mm) hose

[Adaptation] KAWASAKI 750/800
[Quantity] 1 piece

Compared to the genuine base gasket, the surface has been specially processed to improve sealing performance.
In addition, the special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, it is made of metal, so there is no chance of tearing during maintenance.
This is a high-performance gasket that is more economical than genuine products.

[Adaptation]
External manifold (compatible with R&D, FACTORY PIPE, ETC, etc.) and KAWASAKI 650

●This gasket is more economical than other companies' products and genuine products.

■ Kit Contents
・EVA mat × 1
・Gunnel hook × 2
・Lashing belt with ratchet × 2

*Gasoline cans are not included in this kit.*

● A lashing kit for securing stainless steel jerry cans to the rear deck of a PWC.
● Includes a high-grade EVA mat and lashing belts to prevent scratches to the hull when securing the jerry can.
● The EVA mat is CNC processed, designed to prevent the tank from shifting.
● Both the ratchet and gunnel hook parts are made of rust-resistant stainless steel.
● By installing this kit, you can carry vertical gasoline cans (e.g., JL15006-20/25) on the rear deck.

*Gasoline cans are not included with the product.
*Approximately 300mm of space is required at the front and back of the deck surface.
*Cannot be used on boats with R-shaped gunwales.

More affordable than OEM parts!

■Unit of sale: 1 pc.
SEA-DOO End Fitting
*Equivalent to OEM Part No. 269501717

This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

iBR Boot/Bellow for SEA-DOO
・Equivalent to SEA-DOO genuine part numbers (OEM): 268000186, 268000338
・Location of use: Refer to number 50 in the third image.

■Additional Information
When replacing, parts 60 and 70 (clamps) in the diagram must also be replaced at the same time.
These are included with this product, but if you wish to purchase only the clamps, only genuine parts are available.
【60】509000529
【70】293650099

●SEA-DOO Pump Repair Kit

The SEA-DOO genuine part numbers (OEM) are as follows:
① 267000900 Angle Bearing
② 293300086 O-rings ×2
③ 271002071 Seals ×2
④ 293370038 BRP Genuine Circlip
⑤ 293200089 Oil Seal
⑥ 293300090 O-ring

[Compatible models] SEA-DOO
SPARK
GTI SE 90
(*Equivalent to genuine product number 420956123)

This is an aftermarket oil filter with excellent cost performance at a lower price than the genuine product.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

■Material: Brass
JL003-7: 1/4×1/14 90° Thread part 13mm: P1.25: Outer diameter 13.5mm
JL003-8: 1/8×1/8 90° Threaded part 10mm: P0.9: Outer diameter 10mm)

5 sets each of male and female pins.

This is the same waterproof coupler pin used by KAWASAKI, YAMAHA, etc.

6Pin
The terminal in the photo is a set of 6 male and female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

4Pin
The terminal in the photo is a set of 4 pins each for male and female.
This is the same type of coupler used by KAWASAKI and YAMAHA.

[Compatibility] YAMAHA 650/700/760
[Quantity] 1 piece

Compared to the genuine base gasket, the surface has been specially processed to improve sealing performance.
Special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, the material of the super base gasket is metal. Therefore, there is no tearing during maintenance.
This is a high-performance gasket that is more economical than genuine products.

[Applicable models] KAWASAKI 650/750/800

●It has better vibration absorption properties than the genuine product and has improved sealing.
●This gasket is more economical than genuine products.
●It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.
●Top grade gasket made in Japan

[Applicable models] KAWASAKI 650/750/800
[Quantity] 2 pieces

The highest quality gasket made in Japan. It has better vibration absorption and tighter sealing than the genuine product.
This gasket is more economical than genuine products.
It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.

KAWASAKI 750/800/900/1100/1200

This is a gasket with extremely high adhesion.
paper type gasket
Excellent oil and antifreeze resistance.

Aluminum cap for stainless steel cans

■Material: Aluminum
■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

Bent bolt for stainless steel cans

■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

[Applicable models] KAWASAKI ULTRA300/310 series
(*Equivalent to genuine part number 16097-0007)

External oil filter

Compared to genuine products, it is cheaper and has better cost performance.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.
However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Compatible models] =============================================
●KAWASAKI 4 stroke (※)
*Cannot be used with ULTRA300/310, genuine NO.16097-0007 is best.
*External oil filter (*equivalent to genuine part number 16097-0008)
-------------------------
●YAMAHA Yamaha 4 stroke (*)
*FZR/SHO/FZS and other hulls with a displacement of 1800cc or more cannot be used. Please use genuine NO.69J-13440-03.
*External oil filter (*equivalent to genuine product number 5GH-13440-30)
================================================== ========

This is an aftermarket oil filter. It is a great value at a lower price than the genuine product.
Regarding the oil filter... Inside the engine, sludge is generated from impurities contained in fuel and oil, and metal powder is generated due to friction between the cylinder and piston rings. The engine oil can wash away the generated substances, allowing the engine to continue working normally.
However, if the engine oil is used repeatedly over a long period of time, dirt and deterioration will occur in the engine oil, so it is cleaned through a filter to prevent dirt from re-adhering and deterioration.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.