Collection: Newest Products

"Product number: RK16110 RIVA free flow exhaust"
Conversion coupler required when attaching to the genuine water box.

[Compatible models]
KAWASAKI Kawasaki NEW SX-R

●Provides a steady supply of cool air to the engine, significantly improving acceleration and RPM.

• This system draws cool air from the front of the engine compartment near the hull vents.

●Replaces restrictive stock airbox with a high volume precision molded intake tract.

●Cooling air enters the system through an oversized K&N filter element.

[Compatible models] KAWASAKI ULTRA 310/300

The extra-large filter and large-diameter 4-inch pipe are unaffected by the heat in the engine compartment.
Air is sent to the supercharger to improve both acceleration and top speed.
Comes with a water-repellent pre-filter.

■Filter installation diameter: 4 inches (approx. 100mm)

[Compatible models]
KAWASAKI Kawasaki
ULTRA 260/250

By increasing the amount of air intake and sending a large amount of air into the engine,
Low and medium speed acceleration is improved, and top speed is also increased.

[Compatible models]
KAWASAKI STX-15F/15S/12F

●By increasing the amount of air intake and sending a large amount of air into the engine,
Low and medium speed acceleration is improved and top speed is also increased.

● Directly mounted on the throttle body to increase intake efficiency.

■With water repellent pre-filter
■Included: Small filter for blizzer x 2

[Product Specifications]
■Material: Steel plating

■Applicable: Class 3, Mount lock pin diameter: 16mm

■Square type width: 2 inches

■Maximum traction force: 1575-2000kg

Hitch ball shaft diameter: 25mm

■ Drop: 6 inches

[Compatible models] KAWASAKI Ultra150-A1 model only (genuine part number: 92070-3704)

●Sold in units of 1 piece *Image is for illustrative purposes only.

■Additive for storing fuel in a marine jet for long periods of time, such as during the winter.
■Prevents gasoline deterioration and keeps the fuel system clean and suppresses corrosion.
■A must-have item for 4-stroke and catalyst models!
■Made in the USA
■Capacity 355ml (12oz)

■Category 4, 2nd petroleum, danger level 2
■Flash point: 11.0℃, boiling point 82.2℃

[How to use]
Add 3 ml of this agent to 1 liter of gasoline.
If stored for more than 2 months,
Add 8 ml of this agent to 1 liter of fuel, fill up the tank, start the engine, and circulate combustion through the fuel system.

●YAMAHA genuine parts

●Waterproof battery switch set for MJ FX, VX, EX series

●Set contents: Parts necessary for installation such as battery switch body, power cable, screws, etc.

【 specification 】
Rated voltage: DC12V Rated current: Maximum 60A

●A waterproof battery switch set that allows you to easily turn on/off the battery power of your marine jet.

●Eliminates the hassle of removing the cable from the battery terminal when the marine jet is not in use.

●In addition to the switch, all the parts necessary for installation such as power cables and screws are included.

[Compatible models]
YAMHA 4 stroke model (FX-SHO/FZR/FZS)
For other models, please use "Q5W-MIT-001-088".

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Compatible models] YAMAHA
Yamaha 4-stroke FX (excluding FX-SHO/FZR/FZS)/VX
(※)Cannot be used for FX- SHO / FXR /FXS

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Applicable models] For KAWASAKI Di model only (genuine product number: 92070-3705)

●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[PWC compatible models]
KAWASAKI For Kawasaki 4 stroke

For ULTRA series
250X
260X/260LX
300X/300LX
310X/310LX/310SE/310R

●Sold as a set of 4 ●KAWASAKI genuine product number: 92070-3707 and equivalent product

[PWC compatible models]
KAWASAKI For Kawasaki 4 stroke

For ULTRA series
250X
260X/260LX
300X/300LX
310X/310LX/310SE/310R

●KAWASAKI genuine product number: 92070-3707

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■Made of steel

■Pin size: φ16mm×70mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

[Compatible models] 1000 / 1100 4-STROKE FX140 FX-C FX160 FX160-C

High torque starter motor built to exceed OEM stock torque.
OEM #:60E-81800-00

[Correspondence] KAWASAKI
ULTRA310(14-)
ULTRA300(11-13)
ULTRA LX(12-)
1500SX-R(17-)
STX15F(14-)

■Set contents
[1] Kawasaki genuine R4 oil (J0148-0002-1) 4L x 1
[2] Kawasaki genuine R4 oil (J0148-0001) 1L x 1
[3] External oil filter (JL013) x 1
[4] JETRENU PURPLE (JR-1001) 473ml×1

■About oil change
*Based on the information in the service manual,
The amount required for a normal oil change is set, but depending on the work involved, more than 5L may come out.
In that case, please prepare Kawasaki R4 SG10W-40 oil separately.

■JR-1001 JETRENU PURPLE details
Wash & Wax. A small amount produces surprisingly rich lather, removes dirt from boat hulls and trailers, provides a glossy finish, and provides long-lasting UV protection.
We recommend that you use this 473ml size first. It's just the right amount to use up in one season.

[Applications] Personal watercraft, cars, boats, motorcycles
[Applications/Effects] Cleaning and waxing. Achieves a glossy finish and maintains UV protection
[Contents] 473ml (approx. 15 jet ski washes/when using 30ml each time)
[How to use] Pour about 30ml of this product into an empty bucket, dilute it with water, and polish the hull with a sponge or soft brush. If you use a foam gun, please dilute it according to your preference.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.If swallowed, drink a glass of water and seek medical attention immediately.
4. If it gets into your eyes, immediately rinse with plenty of water.
5. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

Size free

Excellent water absorption! A generously sized poncho for changing clothes.
It's made of microfiber fabric so it's very lightweight.

It can be used not only at the pool, at the beach, and when playing in the water, but also in all outdoor situations.

Excellent water absorption! So of course you don't need a bath towel.
The latest microfiber fabric is very lightweight and compact to carry.
Microfiber gently wraps your body after getting out of the sea.

■ Finished dimensions: Width 79cm Length 111cm
■Material: Microfiber (80% polyester, 20% nylon)

jet ski watercraft watercraft watercraft
Surfing Bodyboarding Wakeboarding Wakesurfing Kiteboarding Flyboarding Diving SUP Windsurfing Kayak Canoe Snorkeling Fishing Marine Sports Skiing Snowboarding Trekking Camping Glamping

[Compatible] For ODI grips only. *Cannot be installed on anything other than ODI.

Set includes 2 lock rings and 2 end caps.
Coordinating it with the hull of the boat or other items will make it look stylish.
*Colors not listed as options are sold out*

●Hard type
●With 3/4 flange
-Size: Total length 120 (grip part 95) x 29mm

[Compatible with] External handlebars *Cannot be used with genuine handlebars.

Fine granular protrusions provide high grip strength.
A glue-free grip that is very popular in America.
This type does not use adhesive for installation; it is fixed with a lock ring.

【please note】
Depending on the time of arrival, the color of the ring and the design and shape of the cap may differ from the photo. Thank you for your understanding.

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Outer diameter 6×6×6mm
Inner diameter 4×4×4mm

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Outer diameter: 6x6x6mm
Inner diameter: 4x4x4mm

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Outer diameter 6×8×8mm
Inner diameter 4×5×5mm

[Compatible models]
SEA-DOO 4-stroke (up to '15)
*Cannot be used with SPARK

■Since this is an instant-use battery, it can be used after injecting the electrolyte and leaving it for about 30 minutes.
■When using in low temperatures or if the product has not been used for a long period of time, please charge it for 1 to 2 hours before use.
*You can use it for a longer period of time by regularly maintaining it so that it does not drop below 12.3V.

■Calcium battery liquid refill type■Size: Width 170 x Length 130 x Height 195mm

■Voltage: 12V ■10-hour capacity: 30Ah ■Charging current: 3A
Weight: 9.31KG

■ Country of Origin: China

[Features]
Excellent self-discharge performance, long life, and starting performance
By making the electrolyte into a gel, we were able to improve the basic performance that is important for a battery.
.
●It will not leak even if it falls on its side! It is a gel battery with a cutoff function, so it will not leak even if it falls on its side .
No need to worry about leaks, etc. ●Maintenance-free
merchandise
Since the battery is shut off from the time of purchase, there is no need to inject/replenish battery fluid, so it is hassle-free.
Pay attention to the charging current.

*Initial charging time: 1 to 2 hours
*If the engine is difficult to start during cold winter temperatures or after the battery has been manufactured, charging will be necessary.

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.
●Double stitch width is 30cm, approximately 3 times that of a standard strap. (See photo)

■Application: Winch strap
■Length: 6.0m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N420-45S small hook 4.5m
*Product number: N410-45S large hook 4.5m
*Product number: N410-60S large hook 6.0m is also available.

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.
●Double stitch width is 30cm, approximately 3 times that of a standard strap. (See photo)

■Application: Winch strap ■Length: 4.5m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N420-60S small hook 6.0m
*Product number: N410-45S large hook 4.5m
*Product number: N410-60S large hook 6.0m is also available.

■Set of protector on STD tie-down belt

■Used when loading a jet on a trailer and transporting it.

■Belt length 4.5m x width 25mm

■24cm from ratchet to S hook

■Made of steel

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.
●Double stitch width is 30cm, approximately 3 times that of a standard strap. (See photo)

■Application: Winch strap
■Length: 6.0m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N410-45S large hook 4.5m,
*Product number: N420-45S small hook 4.5m,
*Product number: N420-60S small hook 6.0m is also available.

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.

■Application: Winch strap
■Length: 4.5m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N410-60S large hook 6.0m,
*Product number: N420-45S small hook 4.5m,
*Product number: N420-60S small hook 6.0m is also available.

Serena

[Compatible model] C/GNC27

*Highway Star not confirmed

A steel hitch member that uses a square pipe in the main bar.
The main bar, ball mount, mounting stay, etc. are baked and painted, the hitch ball is chrome-plated steel, and the detachable pin is also plated steel.

*******************************************
[Traction force] C
[Ball mount] Dedicated ball mount
[Installation difficulty] ☆☆
Hole drilling required Highway Star unconfirmed
*******************************************

[Square steel (HC)]
*Both main bar (square type) and accessories are steel types*

【set content】
Ball mount/Hitch ball/Detachable pin/Mounting stay/bolt/Wiring socket mounting stay/Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

X-TRAIL

[Compatible model] NT32

*If the plate does not fit, drilling is required.Relay wiring may be required.

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-8
[Installation difficulty] ☆☆
If the plate does not fit, drilling is required.Relay wiring may be required.
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

X-TRAIL

[Compatible model] NT32

*If the plate does not fit, drilling is required.Relay wiring may be required.

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-8
[Installation difficulty] ☆☆
If the plate does not fit, drilling is required.Relay wiring may be required.
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

X-TRAIL

[Compatible model] NT32

*If the plate does not fit, drilling is required.Relay wiring may be required.

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-8
[Installation difficulty] ☆☆
If the plate does not fit, drilling is required.Relay wiring may be required.
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

X-TRAIL

[Compatible model] NT32

*If the plate does not fit, drilling is required.Relay wiring may be required.

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-7
[Installation difficulty] ☆☆
If the plate does not fit, drilling is required.Relay wiring may be required.
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

X-TRAIL

[Compatible model] NT32

*If the plate does not fit, drilling is required.Relay wiring may be required.

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-7
[Installation difficulty] ☆☆
If the plate does not fit, drilling is required.Relay wiring may be required.
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

X-TRAIL

[Compatible model] NT32

*If the plate does not fit, drilling is required.Relay wiring may be required.

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-7
[Installation difficulty] ☆☆
If the plate does not fit, drilling is required.Relay wiring may be required.
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

caravan wide

[Compatible models] CW4E26 / CW8E26 (wide)
*Even with the same model, “N-080” is applicable for narrow.

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Hole required
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

caravan wide

[Compatible models] CW4E26 / CW8E26 (wide)
*Even with the same model, “N-080” is applicable for narrow.

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Hole required
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

caravan wide

[Compatible models] CW4E26 / CW8E26 (wide)
*Even with the same model, “N-080” is applicable for narrow.

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Hole required
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

caravan

[Compatible models] CBF-VR2E26 / CW4E26/ CW8E26 (narrow) *The wide version of the same model is "N-081".

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Hole required
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

caravan

[Compatible models] CBF-VR2E26 / CW4E26 / CW8E26 (narrow) *The wide version of the same model is "N-081".

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty] ☆☆
Hole required
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.