Collection: Newest Products

A ball mount with an O-ring (SRX-071) that reduces rattling noise when towing.

■Shaft diameter: φ19mm
■For SOREX hitch members only

[Notes when ordering]
★Please let us know the model of your car so we can engrave the grade★
*Hitch ball and detachable pin are not included.
*Since this is a made-to-order item, cancellations, changes, and returns are not possible after the order is confirmed (delivery date information).

SRX-123B6
SRX-123B7
SRX-123B8
SRX-123B9

●Ensures stability when parking.

SRX-117-0/1 for NF-1/NF-E
SRX-117-0/2 For boat trailers *Please let us know the trailer model and mounting location when ordering.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

A stainless steel ball mount with an O-ring (SRX-071) that reduces rattling noise when towing.

■Shaft diameter: φ19mm
■For SOREX hitch members only

[Notes when ordering]
★Please let us know the model of your car so we can engrave the grade★
*Hitch ball and detachable pin are not included.
*Since this is a made-to-order item, cancellations, changes, and returns are not possible after the order is confirmed (delivery date information).

SRX-082B6
SRX-082B7
SRX-082B8
SRX-082B9

For the matte type, please select part number SRX-123 series.

Steel ball mount.

■Shaft diameter: φ19mm
■SOREX square type (SX3002) hitch member only

---[Notes when ordering]-------------------------------------- ----------
★Please let us know the model of your car so we can engrave the grade. ★
*Hitch ball and detachable pin are not included.
*Processing may be required due to differences in hole position due to individual differences.
*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- -------------------------

SRX-080B1
SRX-080B2
SRX-080B3
SRX-080B4
SRX-080B5

●Sold in units of 1 piece.
●A hook that can be attached to any position on the side frame.

Please select the U bolt size when ordering.
[1] 42×100mm
[2] 47×100mm
[3] 52×100mm

【please】
When ordering, please let us know the trailer model and installation location.

■Lineup
SRX-016-B1 For side frame
SRX-016-B2 for tongs
SRX-016-B3 Wide

*10 inch wide tires are
It can be mounted vertically to the side frame using the wide (SRX-016-B3) bracket.

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] YAMAHA FX SVHO (2014-2018) *Includes CRUISER

Adjustable sponsons.
The base plate is machined from aluminum.
This is the color version of SE-101039. Available in 3 colors

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

【Color】
SE-101035GR-W Green
SE-101035RED-W Red

●NEW-WIDE (The base is 8mm wider than before, improving running stability!)

●The angle of the side fins can be adjusted steplessly from 0 degrees to -12 degrees with respect to the bottom edge of the sponson plate.

●The protruding amount of the side fins is 25mm from the sponson plate surface.
The rear end of the side fin attachment type sponson plate is cut and the amount of protrusion is reduced.

●Similar to the previous model, the sponson plate can be installed in four positions: up to 24mm in the front and back, and up to 11mm in the top and bottom.

●The flap at the rear end of the base plate can also be adjusted steplessly in the range of 0 degrees to -14 degrees, just like the previous model.
The guideline is engraved, so you can easily adjust the left and right angles.

[Compatible models] YAMAHA FZR / FZS

[1] SE-027020 For STD standard handlebar (STD bar Φ22.4) [2] SE-027020F For FAT fat handlebar (FAT bar Φ28.6)

●Co-developed with Chris Muckle Gauge!
●The handlebar position has been set as low as possible to suit the racing scene.

[Compatible models] YAMAHA FX SHO

[1] SE-027019 For STD standard handlebar (STD bar Φ22.4) [2] SE-027019F For FAT fat bar (FAT bar Φ28.6)

●Co-developed with Chris Muckle Gauge!
●The handlebar position has been set as low as possible to suit the racing scene.

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHT08: Outer diameter 8× 8× 8mm/Inner diameter 5× 5× 5mm
NHT10: Outer diameter 10 x 10 x 10 mm / Inner diameter 7 x 7 x 7 mm
NHT12: Outer diameter 12×12×12mm/Inner diameter 10×10×10mm

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHRT1008: Outer diameter 8×10×10mm/Inner diameter 5×7×7mm
NHRT1210: Outer diameter 10 x 12 x 12 mm / Inner diameter 7 x 8 x 8 mm
NHRT1412: Outer diameter 12 x 14 x 14 mm / Inner diameter 8 x 10 x 10 mm

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHRE0806: Outer diameter 6 x 8mm/Inner diameter 4 x 5mm
NHRE1008: Outer diameter 8 x 10mm/Inner diameter 5 x 7mm
NHRE1210: Outer diameter 10 x 12mm/Inner diameter 7 x 8mm
NHRE1412: Outer diameter 12 x 14 mm / Inner diameter 8 x 10 mm

[Nekopos shipping products]
*Credit card payment or advance transfer only *Date and time cannot be specified *For cash on delivery, shipping fee is 800 yen/Hokkaido/Okinawa 1,500 yen (excluding tax)
*Other products ordered at the same time are not eligible for free shipping.

■Resin material with excellent solvent resistance, chemical resistance, oil resistance, impact resistance, abrasion resistance, and weather resistance.
■Operating temperature range -20℃～110℃

Please select a size
NHRC0806: Outer diameter 6×8mm/Inner diameter 4×5mm
NHRC1008: Outer diameter 8×10mm/Inner diameter 5×7mm
NHRC1210: Outer diameter 10 x 12 mm / Inner diameter 7 x 8 mm
NHRC1412: Outer diameter 12 x 14mm/Inner diameter 8 x 10mm

[Material] Plastic [Size] Length x width x height
-87011(S): 26×17×16.5~20cm
-87012(M): 30×17×16.5~20cm

●It also helps to secure the battery and reduces damage to the boat and battery due to vibration.

-A kit that allows you to change the 2-wheel launcher to a 4-wheel type.

*However, cannot be installed on "J-130SX Single Compact" *Processing work such as length cutting is required.

*Please note that the types differ depending on the model.
★JL222: J-130/J-1300/J-1300X *J-130SX cannot be installed ★JL223: J-1480/J1480X

[Product information]
●To prevent scratches and damage, only single items can be shipped and cannot be bundled with other products. ●Cash on delivery or combined packaging is not possible as they are shipped directly from the manufacturer.

Tether for YAMAHA

■Material: Brass
JL003-7: 1/4×1/14 90° Thread part 13mm: P1.25: Outer diameter 13.5mm
JL003-8: 1/8×1/8 90° Threaded part 10mm: P0.9: Outer diameter 10mm)

■Material: Brass
JL003-2: 1/4 blind (threaded part 13mm: P1.25)
JL003-3: 1/8 pulse straight (threaded part 10mm: P0.9: outer diameter 7mm)

When changing the cooling hose routing or adding a bypass line,
Used to close holes that are no longer needed.

Rear side lights Vehicle side lights

orange red clear

●Sales unit: 1 piece ●Accessories: Rubber grommet ●Voltage: DC24V
●12V compatible ●Size Product external dimensions (including rubber): Approx. 9.5cm
Lamp body external size: Approximately 6cm

T type
It is made of aluminum and has a plated finish, giving a stylish look to the water area.
The pipe body is also very compact.

■Number: 1
■Material: Aluminum

■Please select your desired size.
3/8 x 3/8 x 1/4: different diameter (outer diameter 9.5mm/6.3mm, inner diameter 7.7mm/5mm)
3/8 x 3/8 x 3/8: Same diameter (outer diameter 9.5 mm, inner diameter 7.7 mm)

[1:97-4333] 1/4×1/4×1/4 Outer diameter 10mm Inner diameter 6mm
[2:97-4335] 1/2×1/2×1/2 Outer diameter 14mm Inner diameter 8.5mm
[3:97-4387] 3/8×3/8×3/8 Outer diameter 11mm Inner diameter 6mm
[4:97-4339] 3/8 x 1/2 x 1/2 Outer diameter 11mm/14mm Inner diameter 6mm/8.5mm.

Shape: T type
Used when installing between cooling hoses to change routing or when creating a bypass line.

This spring is
Reducing the tension improves throttle response, but it also makes it more likely to burn due to vibration, etc.
If you make it stronger, it will have the opposite effect.
As the g number increases, the tension becomes stronger.

color plug cap
●Quantity: 1 piece

●The tail lamp is larger and has a more impressive finish.

●In addition, the high-intensity fiber-type small lamp improves night visibility.

●The turn signal unit is equipped as standard with sequential turn signals that can express a sense of great movement from side to side.

●It is designed to work in conjunction with the turn signal of the towing vehicle, and the turn signal on the trailer side flows in a chain type.

■Size: Height 160x Width 390x Thickness 135mm

Light up the underside of the trailer with waterproof tape SMD.
Makes your PWC and trailer look stylish even when driving at night.

■Length: 500mm
■Installation method: double-sided tape
■Specifications: Waterproof tape type LED

■1 piece■Nut only■M12×1.25p

0905-05 Decorative wheel nut socket 17mm

Stainless steel bumper for optical tail.
■Material: Stainless steel ■Sold as one side (separate left and right shapes)

0818-25 Left side
0818-24 Right side

Bumper for optical tail.

■Material: Steel black paint

●Sold as one side (separate left and right shapes)

0818-20 Right side *Top of photo
0818-21 Left side *Photo below

Bumper for smoothing bumper cover.

■Material: Stainless steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

Bumper for smoothing bumper cover.

■Material: Steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

It can be attached to the trailer frame and is an unprecedented dress-up item.
By attaching it to the frame, you can create an overwhelming presence.
It can also be combined with SMD.

●Size: length 520mm x width 58mm x thickness 0.5mm
●With double-sided tape
*The sticker itself is attached using double-sided tape.

Use it through a ratchet belt.
The oval type makes it easy to pass the belt through.
Can be used even if cut.

400mm×1 piece

0756-01 Gray
0756-03 Red

A multi-purpose hook that can be attached to the frame and mount of Max trailers.
■Material: Stainless steel (*Mounting bolts are steel)

[1]0714-02: 50×50mm
[2] 0714-03: 75×45mm

[Change from Viper color to black]

A multi-purpose hook that can be attached to the frame and mount of Max trailers.
■Material: Steel with bolts

[1]0714-00: 50×50mm
[2] 0714-01: 75×45mm

It is sold cut into 1m lengths considering the maximum shipping size.
If you paste it on the bank of a trailer, you can load and unload jets, boats, etc. by sliding it.

[Same color/size] Length approx. 1m x width 45mm (top side 40)mm x 4 pieces

As this is an overseas manufactured product, color unevenness and texture may vary depending on arrival time and individual differences. Small scratches occur during the manufacturing and transportation process, and are not subject to product complaints.
Due to the shape of the product, it cannot be bundled with other products.
Up to 2 sets (8 pieces) of the same item can be shipped in one package.

●Color: 4 colors ●Width: 50mm
●Belt length: 5,000mm

Adding a multi-strap function to the hook part reduces damage to the hull!
The functionality has been improved as it can be easily fixed to PWC where hooks are difficult to pass through.

0306-12 Black
0306-13 Red
0306-14 Yellow
0306-15 Blue

Mainly occurs when using a domestic standard (50mm) mount on a US hitch member (2 inch 50.4mm).
Reduces rattling of square hitch mount.

[1]0211-02 1.5mm
[2]0211-01 2.0mm

●This is a member cover designed specifically for tight hitches and is secured with a ball mount key.
●The tail member is emphasized more stylishly.

■Inlet type: 50φ round, 50mm square, 40mm square ■Material: ABS *There are multiple inlet types, so please choose the type you like.

●It is a drop-shaped air fender.
●The rope attachment hole is thick and reinforced with ribs, making it durable and can be installed upside down and used as a course buoy.
●You can easily inflate with an air compressor or air gun.

[Product specifications]
■Size: Diameter/Total length/Eye diameter
A-0: 230mm / 290mm / 16mm
A-1: 290mm / 370mm / 25mm
A-2: 390mm / 490mm / 25mm
A-3: 470mm/590mm/25mm
A-4: 550mm / 710mm / 25mm
A-5: 700mm / 920mm / 30mm
A-6: 860mm / 1180mm / 38mm

【please note】
Air injection nozzle is not included.
*If you need an air injection nozzle, please purchase [separately sold part number: 97561].
*It will be delivered with the air removed.

[1] L type: A■60 / B■95 / C■50 / D■35 (mm)
[2] L-shaped long: A■60 / B■95 / C■50 / D■90 (mm)
[3] Straight: A■115/B■95/C■50/D■0 (mm)

Plate thickness: 2.0 mm
Plate only (screws etc. not included)

[1] and [2] are L-type
[3] is a straight type (straight without bending).

■For MIKUNI ■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use. Please note.

006-9050 50
006-9052 52.5
006-9055 55
006-9057 57.5
006-9060 60
006-9062 62.5
006-9065 65
006-9067 67.5
006-9070 70
006-9072 72.5
006-9075 75
006-9077 77.5
006-9080 80
006-9085 85

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

■Please use compatible main jets and slow jets for CV cabs and CDCV cabs.
■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use.

006-7110 110
006-7115 115
006-7120 120
006-7125 125
006-7128 128
006-7130 130
006-7132 132
006-7135 135
006-7138 138
006-7140 140
006-7142 142
006-7145 145
006-7148 148
006-7150 150
006-7152 152
006-7155 155
006-7158 158
006-7160 160
006-7162 162
006-7165 165

■Please use compatible main jets and slow jets for CV cabs and CDCV cabs.
■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use.

006-6050 50
006-6055 55
006-6060 60
006-6065 65
006-6068 68
006-6070 70
006-6072 72
006-6075 75
006-6078 78
006-6080 80
006-6082 82
006-6085 85
006-6088 88
006-6090 90
006-6092 92
006-6095 95

Primer fitting used when removing the carburetor choke shaft

[For KEIHIN]
006-538 Primer inlet
006-539 Blind Cap