Collection: New products

●Contains 10 female terminals.

●Compatible with SEA-DOO [Genuine product number: 710000837 710000836].

5 sets each of male and female pins.

This is the same waterproof coupler pin used by KAWASAKI, YAMAHA, etc.

[Quantity] 2 pieces
This is a pin blind seal.

6Pin
The terminal in the photo is a set of 6 male and female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

4Pin
The terminal in the photo is a set of 4 pins each for male and female.
This is the same type of coupler used by KAWASAKI and YAMAHA.

3Pin
The terminal is a set of 3 male and female pins each.
This is the same type of coupler used by KAWASAKI and YAMAHA. *

Specifications: 3Pin
Color: black triangle

The terminal in the photo is a set of 3 male and 3 female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

3Pin

The terminal in the photo is a set of 3 male and 3 female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

2Pin

The terminal in the photo is a set of 2 male and 2 female pins.
This is the same type of coupler used by KAWASAKI and YAMAHA.

This is the same type of connector used for genuine wiring such as KAWASAKI.

■Coupler: 1 set of female and male
■Pins: 4 each

This is the same type of connector used for genuine wiring such as KAWASAKI.

[Quantity] Male, female x 10 each set

[Compatible models]
KAWASAKI 750(B)/800

An indispensable item for crank maintenance and racing scenes.

Made using the same material as the normal one and made it even stronger.
The balance of the crank is the best.
■Made in Japan

*With big end bearing and small end bearing sold separately.

[Compatibility] YAMAHA 650/700/760
[Quantity] 1 piece

Compared to the genuine base gasket, the surface has been specially processed to improve sealing performance.
Special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, the material of the super base gasket is metal. Therefore, there is no tearing during maintenance.
This is a high-performance gasket that is more economical than genuine products.

[Compatible models] YAMAHA 700 / 760 “M8 Bolt” only

●This gasket is more economical than the genuine product and has better vibration absorption and tighter sealing than the genuine product.
●Improves cooling efficiency with a shape that increases the flow rate compared to normal water flow.
●Top grade gasket made in Japan

[Note] Not compatible with M10 bolts.

[Applicable models] KAWASAKI 650/750/800
[Quantity] 2 pieces

●It has better vibration absorption properties than the genuine product and has improved sealing.
●This gasket is more economical than genuine products.
●It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.
●Top grade gasket made in Japan

[Applicable models] KAWASAKI 650/750/800

●It has better vibration absorption properties than the genuine product and has improved sealing.
●This gasket is more economical than genuine products.
●It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.
●Top grade gasket made in Japan

[Adaptation] KAWASAKI 750/800
[Quantity] 1 piece

Compared to the genuine base gasket, the surface has been specially processed to improve sealing performance.
In addition, the special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, it is made of metal, so there is no chance of tearing during maintenance.
This is a high-performance gasket that is more economical than genuine products.

[Applicable models] KAWASAKI 650/750/800
[Quantity] 2 pieces

The highest quality gasket made in Japan. It has better vibration absorption and tighter sealing than the genuine product.
This gasket is more economical than genuine products.
It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.

Used for joints of independent wiring in campers, trailers, etc.
The main body can be fixed, and can be easily attached and detached with one touch.

●Cable used
Core diameter: ~5mm (17sq)
Allowable current: 50A

[Adaptation] KAWASAKI 310/300 series
ULTRA310X / ULTRA310LX (-'21) / ULTRA310R / ULTRA310X-SE
ULTRA300X/ULTRA300LX
(There is one extra wire when using 300)

*Not available for 250/260/LX series

[Product name] LIMITER CUT LIMITER CUT

You can release the speed limiter and experience the original top speed with simple connection and installation. Since the stock ECU is used as is, you can enjoy it easily. You won't lose cruise control functionality either.
■With instruction manual

【important】
●This product is planned and manufactured for competition purposes (especially closed races).
●We cannot guarantee any claims regarding the hull, engine, etc., so please be careful when using this product.
●Can be used in conjunction with the separately sold "JL23022 Speed ​​Limiter Cut ON-OFF Switch".

Optional parts for boats equipped with UNLIMITED limiter cut (JL23031)
KAWASAKI ULTRA series 300/310 (-'21)

[Product name] Limiter cut ON/OFF switch LIMITER CUT ON/OFF SWITCH

A 3-way ON-OFF-ON switch allows for normal mode and limiter cut mode.

[Applicable models] KAWASAKI 4-stroke ALL
STX-12F /STX-15F
ULTRA LX/250X/260X/260LX/300X/300LX

[Product name] LED stop lamp kit LED STOP LUMP KIT

[Kit contents]
-LED stop lamp unit x 1,
●Flexible LED lamp x 1,
●Mounting screws x 2

First PWC! This is a brake stop lamp kit exclusively for the KAWASAKI ULTRA series.
It reads the engine speed and turns off when the accelerator is on, and the LED lamp lights up when the accelerator is off.
Since it is always on while idling, you can notify people around you of your boat's presence even from a distance.
The stop lamp included in the kit uses high-brightness LED and boasts high visibility.
The flexible light lens body can be installed anywhere, making it ideal for PWCs with many curved surfaces.
It is also waterproof and durable.

This allows the following boat to slow down when touring etc.
It can be notified quickly and can be expected to be effective in preventing rear-end collisions.

[About installation]
Since it is a coupler on coupler, no special wiring processing is required.
(Lamp and unit connection processing/LED flex lamp installation only)
Attach with double-sided tape on the back of the lamp body.

【Product details】
Unit dimensions: 70×40×35mm
Cord length: Unit power line 300mm
Rotation signal line 1,400mm
Lamp connection wire 2,000mm
Power consumption: 12V 4A
Light dimensions: 110×30×10mm
Cord length: 800m

Jet stand for small boats and jet skis.
This product consists of a metal frame with four durable casters.

The width can be changed in 3 steps: 12 inches, 16 inches, and 20 inches, and the tilt angle can be freely adjusted.
It also comes standard with a carpeted bunk to prevent slipping.

Equipped with a dual brake system, it can be used for multiple purposes.

*Please note that this boat platform is only intended to be moved around the site by hand, and any damage caused by towing it by car, installing it on a loaded vehicle, or transporting it will not be covered by claims.

*This product is used to lower a boat that has been fished with a harness or sling to our dock and move it around the facility. Please note that the design of this product does not support lateral movement (movement by pulling/sliding the hull) from the trailer to the berth or from the beach stand to the berth.

■Product size: 86×121×48cm
■Weight: 29kg
■Maximum loading capacity: 450kg
■4 casters (2 wheels with stopper)
■Assembly type (with English assembly manual)

KAWASAKI 750/800/900/1100/1200

This is a gasket with extremely high adhesion.
paper type gasket
Excellent oil and antifreeze resistance.

[Adaptation] KAWASAKI 750/800/900/1100/1200
[Quantity] 1 piece

Paper type gasket.
This gasket has better vibration absorption than the genuine product and has very high adhesion.
It has high compressibility, excellent resistance to stiffness, oil resistance, and antifreeze resistance.

[Adaptation] KAWASAKI 750/800/900/1100/1200
[Quantity] 1 piece

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

●This is a replacement terminal.

■Compatible with: Class III hitch ball mount socket 2 inch square type
■Material: Plastic (chrome plated)

It is a mount cap.
The material is made of plastic with a chrome plated finish, making the hitch member look stylish.

*There are slight individual differences in the size of the mounting part.
*Please note that there may be slight scratches during the manufacturing process.

[Product specifications] All stainless steel hose clamp

 ■Material: Stainless steel

■Size/Quantity
7~16mm / 10 pieces
10~23mm / 10 pieces
16~32mm / 10 pieces
33~57mm / 10 pieces
47~70mm / 10 pieces
59~82mm / 5 pieces
71~95mm / 5 pieces
91~114mm / 5 pieces
118~140mm / 5 pieces

■Body size: 270mm
■Wire total length: approx. 590mm
■Maximum opening width: 42mm
■Weight: 515g

[Application] Tool for removing hose clamps located in hard-to-reach areas where workability is poor.
● Remote control via wire allows work to be done in areas where conventional pliers cannot reach.
●The structure of the pliers allows them to be locked when squeezed.

[Application] For removing male and female terminals of connectors [Blade types] ○4 types, □2 types

Remove the terminal from the connector without causing damage.

■Material: Carbon steel
■Depth width: 100mm
■Clamping capacity: 0-130mm

A must-have item for 4-stroke maintenance.
Cannot be used if the valve is stuck.
Please use the cylinder head in a stable condition.

[Retainer attachment diameter]
L■Outer diameter 25.4mm Inner diameter 19.0mm
M■Outer diameter 23.2mm Inner diameter 16.0mm
S■Outer diameter 19.2mm Inner diameter 13.5mm

[Included]
Valve attachment x 2 (●short, ●long)

The small body makes it convenient for use in narrow spaces.

[Material]
■Body part: Zinc
■Bolt part: Steel
[Size] Approx. 55 x 40 x 13 (mm) ■Clamp size: 20 (φmm)
[Contents] 1 pair (2 pieces)

[Application] Used to stop hose lines.

[Adaptation]
External manifold (compatible with R&D, FACTORY PIPE, ETC, etc.) and KAWASAKI 650

●This gasket is more economical than other companies' products and genuine products.

[Applicable models] YAMAHA 4 stroke 1800cc

[Compatible] Product number: JL012 (Manufacturer product number UJ-74) Oil filter wrench
[Material] Steel
[Size] 74φ

[Compatible models] KAWASAKI / YAMAHA

[Compatible] Product number: JL007-1, JL013 Oil filter wrench
[Material] Steel
[Size] 65φ

●An oil-resistant type NA sheet that has a high compression rate, excellent resistance to mating surfaces, and exhibits high sealing performance against both oil and moisture.

●It has better vibration absorption than the genuine product and has improved airtightness. Excellent oil and antifreeze resistance.
Excellent sealing properties against oil, moisture, and antifreeze.

●A tool that allows you to remove the male and female terminals of the connector without damaging them.
●Choose from hole diameter Φ3.2 or Φ2.15.

JL16002S Hole diameter Ф2.15

*Please note that colors may vary depending on the season.

■Compatible with: KAWASAKI Kawasaki
ULTRA 250/260/300/310 series

■Material: Stainless steel
■Application: Remove exhaust manifold

Existing wrenches interfere with the hull, making them difficult to work with and prevent bolts from turning smoothly.
A dedicated angle extension wrench to solve these problems.

"Mirror finish" with a focus on strength and visuals,
This is a product that will shine even in your tool box.

●This is a lashing kit for securing a stainless steel portable container to the rear deck of a PWC.
●Comes with a high-quality EVA mat and lashing belt to prevent scratches on the hull when securing the portable can.
●The EVA mat is CNC machined to prevent the tank from slipping.
●Both the ratchet and gunwale hook sections are made of stainless steel to prevent rust.
●Vertical 20L/25L gasoline cans (JL15006) can be loaded on the rear deck.

■Kit contents: 1 gasoline can
・EVA mat × 1
・Gunnel hook × 2
・2 ratchet lashing belts

[Installation precautions]
*Approximately 300mm of space is required in front and behind the deck surface.
* Boats with R-shaped gunwales cannot be used.

●Portable can specifications ■Material: Body/stainless steel Cap/aluminum ■Size: Width 255 x Length 360 x Height 320 mm
■Accessories: Aluminum cap, nozzle hose, vent bolt (all assembled)
■Instruction manual

■Kit contents
・EVA mat x 1
・Gunnel hook x 2
・Lashing belt with ratchet x 2

*This kit does not include gasoline cans*

●Lashing kit for securing stainless steel cans to the rear deck of PWC.
●A high-quality EVA mat and lashing belt are included to prevent scratches on the hull when securing carrying cans.
●The EVA mat is CNC-processed and designed to prevent the tank from shifting.
●Both the ratchet part and gunwale hook part are made of stainless steel to prevent rust.
- By installing it, you can stack vertical gasoline cans (JL15006-20/25, etc.) on the rear deck.

*Gasoline cans are not included in the product.
*Space is required approximately 300mm before and after the deck surface.
*Cannot be used on boats with an R-shaped gunwale.

Nozzle hose for stainless steel portable cans

■ Total length: 250mm
■Product numbers for which compatibility has been confirmed: JL15006-20, JL15006-25
*This product is shorter than the nozzle hose that comes with the JL15006 stainless steel portable can. Please check the size.

Aluminum cap for stainless steel cans

■Material: Aluminum
■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

Bent bolt for stainless steel cans

■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

Great value 2 piece set sale

UN standard certified product Fire service law compliant product

Made of rust-resistant stainless steel, it will stay shiny even after many years of use.

●Uses a large handle for smooth operation during refueling.
●The poly injection nozzle can be stored inside when not in use.
●It has three handles with a unique structure, so it can be carried by one person or by two people from the left and right sides.

[Product specifications]

■Material: Body/stainless steel Cap/aluminum
■Size: Width 255x Length 360x Height 320mm
■Accessories: Aluminum cap, nozzle hose, vent bolt (all assembled)
■Instruction manual

[Repair parts] Refueling cap, nozzle hose, and vent bolt (ventilation screw) are also sold separately.

UN standard certified product Fire service law compliant product

Made of rust-resistant stainless steel, it will stay shiny even after many years of use.

●Uses a large handle for smooth operation during refueling.
●The poly injection nozzle can be stored inside when not in use.
●It has three handles with a unique structure, so it can be carried by one person or by two people from the left and right sides.

[Product specifications]

■Material: Body/stainless steel Cap/aluminum
■Size: Width 255x Length 360x Height 320mm
■Accessories: Aluminum cap, nozzle hose, vent bolt (all assembled)
■Instruction manual

[Repair parts] Refueling cap, nozzle hose, and vent bolt (ventilation screw) are also sold separately.

A versatile mixer that can perform washing and mixing at the same time.
Please use by connecting the water hose and attachment.

If you put water or undiluted solution into the detergent tank, it will be diluted and squirted out.
There is a scale on the cup, making it easy to measure the liquid.
You can leave the water running, so when the inside of the tank becomes transparent, it's a signal that it's done.

You can switch between water and foam (mixing mode) with the switch on the lid.
The foam can be adjusted to three levels: small, medium, and large, and the amount of foam can be adjusted according to the purpose.

■Water/foam (mixing) switchable
■Foam (mixing) mode: 3 levels of adjustment
■No STOP/OFF function

It is a useful item that can be used in many other ways.

★Add salt corrosion inhibitor...
Flushing of jet skis, outboard motors, in-boat engines, etc.

★Connect to a high pressure washer...Clean screen doors and shutters

★Connect to a watering nozzle for watering plants, sprinkling water, showering pets, cleaning windows, etc.

JL15001SL Silver
JL15001GD Gold
JL15001R Red
JL15001OR Orange
JL15001LG Lime Green

●Outer diameter: approx. 8mm
●Inner diameter: approx. 5mm
●Length: Approximately 100cm

[Compatible with] YAMAHA 760/700
[Quantity] 1 piece
Ф48

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

[Adaptation] YAMAHA 760/700
[Quantity] 1 piece

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.