Collection: New product

[Applicable model] KAWASAKI KAWASAKI 800X-2
■Bar clamp: Compatible with 7/8" bar (standard type φ22.2)

Evolution steering system!
Bearing type steering system kit for Kawasaki 800X-2.
By changing the steering stem from the original bush type to a bearing, smooth steering without rattling is possible.
The steering shaft is made of aluminum for maximum strength and rigidity.
In addition, the steering feel using sealed bearings is characterized by smoothness that far exceeds that of the OEM steering mount.

The billet aluminum steering arm has a high-strength aluminum construction with excellent strength and rigidity, and the ball joy attachment position can be adjusted.

Includes lower bearing unit and [UL35003] standard 80mm handle mount kit.
All aluminum parts are anodized for excellent corrosion resistance.

[Information] The following can be used as optional parts.
[UL061] Fat bar clamp
[UL062] Offset clamp

[Compatible models] SEA-DOO SPARK
UNLIMITED billet steering mount (product number: UL35110) optional item

This is the top plate required for installation.

[Compatible models] SEA-DOO 2015 or later, DESS system model
UNLIMITED billet steering mount (product number: UL35110) optional item

The top plate required for installation is a special plate for the new DESS post.

For UNLIMITED adjustable mount (product number: UL35003-AJS)

mount base
■Accessories: Mounting bolts

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts plate only.
You can adjust the mount to your liking by combining the post, base, etc.

【please note】
This product only includes the plate and bolts are not included.

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts base only.
You can adjust the mount to your liking by combining the post, head, etc.

【please note】
This product only includes the base and bolts are not included.

[Applicable models] KAWASAKI ULTRA series
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310LX/310LX-S

Clamp standard bar (22.4mm diameter) standard equipment

A dedicated set that allows UNLIMITED handle mount (UL35003) to be used with the ULTRA series!

A 160mm optional mount post is installed to lower it to the limit.
This makes it easier to shift the front load to the riding position when cornering, providing a sense of stability in steering.

[Kit contents]
●UL35003 handle mount kit
(Mount, standard bark clamp, cap bolt M8 x 30 x 30 mm),
●UL35003-160 optional mount post 160mm

[Applicable models] KAWASAKI STX160/ULTRA series
STX160LX/160X
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310

A handle mount with a 230mm post.
Due to its height, you can ride with an upright posture, and by raising your line of sight, you can ride with a sense of security and stability.

[Kit contents]
UL35003: Handlebar mount base/handlebar clamp (mounting bolt M8-30 x 4),
*Clamp standard bar (22.2mm diameter) standard equipment
UL35003-230: Optional mounting post 230mm

Options for UNLIMITED handle mount (product number: UL35003)

■Contents: Optional mount post

●It is now possible to select the length of the handle post to suit the riding scene.

【Guidance】
The lineup of optional mounts are 80mm, 160mm, and 230mm.
When using ULTRA handle mount cover (product number: UL048-S set cover/UL35005 carbon cover) with ULTRA250/260/260LX/LX, please use 230mm.

[Compatible models] KAWASAKI Kawasaki
STX series (750/900/1100/1100DI/STX-R/12F/15F/15S),
900STS
800X-2
■Compatible with standard bar (22.4mm, 7/8")

*Compatibility can be expanded by using optional items.
Can be used with the ULTRA series when used with "UL35003-160 Mount Post 160mm".

The definitive lowdown handle mount!
Succeeded in lowering 100mm from the stock mount.
You can freely adjust the height and bar of your choice!
Systemized based on position 80mm post.
The handle height can be adjusted by changing the optional post, and is compatible with many Kawasaki models.
18 positions can be selected by making the post base and clamp base individually compatible.

[Kit contents]
mount head, mount base
Standard bar (for bar diameter: 22.4mm) clamp
Cap bolt M8×30×30mm
Mount post 80mm

*Second photo... Comparison photo with the genuine one with the mount replaced
*Third photo...Installation image

[Compatible models]
KAWASAKI STX160LX/STX160

This cover protects the back side of the throttle lever when replacing the steering wheel of the STX160 series.

■Material: Stainless steel

Spare bolt for aluminum lock ring (UL32003) included with UNLIMITED lock grip
*Cannot be used with grips from other manufacturers such as ODI grips.

[Size] M4 x 12mm
[Material] Stainless steel (SUS)

【please note】
*Cannot be used with grips from other manufacturers such as ODI grips.
*Please be careful not to overtorque when tightening.

UNLIMITED handlebar and handlebar with inner diameter 13~20φ

[Quantity] 1 set left and right

It is possible to extend the handlebar by 5cm on each side.

[Outlet reason] This is a special price for stock replacement.

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

[Compatible models]
For KAWASAKI 1200/1100 KEIHIN CDCV carburetor *We apologize, but we cannot accept inquiries regarding compatibility other than those listed above.

By changing the spring rate, it is possible to change the opening and closing timing of the vacuum valve of the CV carburetor.
●3 types x 1 each ●Spring rate 55, 60, 65

Insert into the male flasher adapter with one touch,
If used with a mixer, it can be used on KAWASAKI and SEA-DOO boats.

During engine flushing using salt remove fluid
This product connects the hull and mixer and washes with water.

KAWASAKI/SEADOO model
■Hose spigot: 18mm

Aluminum billet flushing adapter used for engine flushing.

Can be used in conjunction with UNLIMITED billet flush fitting [UL53006],
The screw part does not fit completely. (This does not affect use)

[Compatible models] For KAWASAKI

Kawasaki models do not have enough space around the oil filter, so
It is difficult to attach and remove the filter and requires some skill.
This product makes it easy to loosen and tighten the filter with a thin wrench.

■Total length: 50cm long pick tool
■Includes: Leather pick tool cover included

Quickly picks up plastic, tree branches, aquatic plants, etc. that get caught in the impeller while driving without having to remove or remove the intake gate.

[Compatible models] YAMAHA
2009~2012 1.8L HO-NA Models・VXR・VXS

Just remove the genuine mesh filter and replace it with this power ring.
Improved airflow provides more power and increases top speed.

[Applicable models] YAMAHA Yamaha supercharger model *SVHO cannot be installed
GP1800
All FZ / FX SHO Models
2013～ VXR / VXS Models
2013~ FX HO Models

Just remove the genuine mesh filter and replace it with this power ring.
Improved airflow provides more power and increases top speed.

Compatible with: 8 holes for MIKUNI

●1 piece
●Weight: 15g
●Adjustable with 8 holes.
●Wire can be drawn from any position.
●The wide adjustment range of the carburetor wire provides uniform acceleration over the entire opening range.

【Compatible Models】Yamaha GP1800/VXR/VXS models 2011 and newer ■Material (Pipe): Aluminum Replaces the restrictive sound suppression system located between the water box and hull exit on watercraft. Reduces back pressure and harmful detonation, improving engine performance. Includes mandrel-bent, powder-coated aluminum tubing for corrosion resistance, and high-temperature silicone replacement couplers.

【Compatible Models】Yamaha FX models 2012 and newer
■Material (Pipe): Aluminum

Replaces the restrictive sound suppression system between the water box and the hull exit on watercraft.
Reduces back pressure and harmful detonation, improving engine performance.
Features mandrel-bent aluminum tubing powder-coated for corrosion protection,
and comes with high-temperature silicone replacement couplers.

【Compatible Models】
Sea Doo GTI 130 / GTX 170 / GTX 230 / RXT・GTX 300 ALL ('20-)
*For 2023 and later models, a siphon break delete kit (RS10123-SBD) is required separately.
■Material (pipe): Aluminum

Replaces the restrictive sound suppression system between the water box and the hull exit on watercraft.
Reduces backpressure and harmful detonation, improving engine performance.
Features mandrel-bent aluminum tubing powder-coated for corrosion resistance,
and includes high-temperature silicone replacement couplers.

[Applicable models] ULTRA310/300 series

●By installing it on the muffler body, it becomes possible to install sensors such as [Product number: AT-200] auto tune.

●Mounting hole: M18xP1.5mm

[Kit contents] Flange body, blind plug, mounting bolts
*Please use genuine gasket.
*Remove the muffler filter before use.

*About 3 weeks after ordering as it is made to order.

[Applicable models] KAWASAKI ULTRA300/310 series

●Remove and use the muffler filter inside the normal muffler.
● Filter maintenance can be omitted by removing the filter.

●Inner diameter Φ60 ⇔ Φ70×Total length 100mm

A silicone coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.
Can be used as a joint between 60mm and 70mm diameter pipes.

●Inner diameter Φ50⇔Φ70×Total length 100mm

A silicone coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.

-Inner diameter Ф147 x total length 85mm

Exhaust coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.

[Adaptation] For KAWASAKI 800X-2

[Regarding processing] Styrofoam cutting of the tank is required (*JCI modification application required)
[Note] This product is not subject to complaints as it is a competition part.

Exhaust pipe made by bending aluminum.
Contributes to approximately 50% (grams) lighter weight and lower center of gravity compared to the genuine rubber tube.
Unlike genuine tubes, there is no expansion due to exhaust temperature, reducing trouble.
Carburetor maintenance is more efficient because the pipes are connected to the bottom of the carburetor.
If you use the T-bolt clamp [Product number: JL0250], there is no need to worry about it coming off.
The joint uses a silicone hose that is highly heat resistant, pressure resistant, ozone resistant, and resistant to deterioration.
■Product weight: 1.3kg

【set content】
Pipe body x 1 set
Joint hose Φ60×70mm×2 pieces
Stainless steel clamp x 2

[Compatible models] KAWASAKI
800SX-R
800X-2

[Product size]
●Outer diameter: 59.65mm
●Total length: 49.15mm
●Minimum inner diameter: 44mm
●Maximum inner diameter: 53mm

Horsepower increases by 1 horsepower just by attaching a sleeve to the stock exhaust line!
The maximum speed has also increased by more than 1km!
We promise improved response and experience in the medium and low speed range.

【Compatible models】KAWASAKI
Exhaust port diameter Φ50mm
ULTRA310LX / ULTRA310LX-S /ULTRA160 /ULTRA300 /15F('09-) /ULTRA250X('08) /ULTRA260X /ULTRA LX('09-)

★For the following models with an exhaust port diameter of Φ60mm, please use part number: JL14001.
STX series ('00-'07) *excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300X/ULTRA LX('07-'08)

●Stylishly enhances the rear exhaust.
●Made from machined aluminum (A6061) for excellent strength and corrosion resistance.
●A cover flange with chemical polished anodizing and superior design.

[Compatible models] KAWASAKI
JL14001: Exhaust port diameter Ф60mm
STX series ('00-'07) *Excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300/310/ULTRA LX('07-'08)

★The following model with exhaust port diameter Ф50mm is part number: JL14002.
15F('09-)/ULTRA250X('08)/ULTRA260X/ULTRA LX('09-)

●Produces a stylish rear exhaust.
●Machined from aluminum (A6061) with excellent strength and corrosion resistance.
●Cover flange with chemically polished alumite processing and excellent design.

[Compatible models] SEA-DOO
GTX-4TEC / RXT / RXT-X(-08)

Luxurious stainless steel buffed mirror finish.
Upgrade your visuals by replacing the cheap genuine hook with a polished one!

【correspondence】
KAWASAKI genuine mount (not compatible with some models)
UNLIMITED MOUNT

Standard handlebar 22.4mm diameter

[Material] Aluminum

This is a clamp to hold the handlebars. The clamp is attached at 60.5 degrees. Handlebars
Looking at the installation position from a 60.5° angle, offset it 25 mm upward and 15 mm forward and backward.

[Compatible] Fat bar 28.6mm diameter

*22.4mm handlebar (standard) can also be used with handlebar spacer (product number: UL35002)

[Material] Made of aluminum

Clamp for attaching handlebars.
Since the mounting part is flat, it can be used with Kawasaki genuine mount and UNLIMITED mount.
When installed on the Kawasaki genuine handlebar mount, the handlebar mounting position will be increased by 20mm.

■Correspondence:
KAWASAKI 4 stroke model
SEA-DOO 4 stroke model

■Application: Tool to apply lubrication to the throttle body to prevent it from sticking.

●A must-have item for those riding in seawater!
●Inject lubricant to prevent the throttle body from sticking.

[About installation]
It is necessary to make a hole in the intake pipe using a drill. Install it in front of the genuine throttle body.

[Application] KAWASAKI 750/800 electrical box [Quantity] Blue 1 piece

By replacing the genuine plastic cap, it becomes an accent of the engine room.
With O-ring

For fat bar (tapered handle) only

■Size: 15cm