Collection: 新商品

When used by attaching it to a stabilizer, it improves straight-line performance,
Make control safer and easier.

■Quantity: 1 set of 2 pieces of the same color
■Compatible with: Hydrofoil stabilizer exclusive product
→Large type: Compatible with product number 04824 / 21971
→Small type: Compatible with product number 04826 / 21972

[Effect]
●The water flow flowing on the surface dynamically creates upward thrust pressure on the bottom surface of the stabilizer, pushing up the stern and pushing down the bow, shortening the time until planing, increasing propeller efficiency, and improving fuel efficiency!
●The water flow created by the propeller is efficiently pushed backwards, improving controllability and straightness.

●The time until planing is halved, making running and control smoother. It also saves fuel consumption by 10-40%.

[Installation method]
1■ Place the stabilizer on the cavitation plate and mark the 4 places to drill holes.
*At that time, after drilling a hole with a diameter of 6 mm, make sure that there is a gap of at least 1 cm between the edge of the cavitation plate and the edges of all four holes.
*If there is no gap of 1cm or more, the cavitation plate cannot be installed as there is a possibility that it will be damaged while driving.

2■ Use a drill to drill holes with a diameter of 6 mm in four locations, and then pass the included bolts from under the cavitation plate.
*From the bottom, temporarily tighten the 4 places by inserting the bolts → cavitation plate → rubber washer → stabilizer → washer → nut.

3■ Perform the final tightening, but instead of final tightening one location at a time, do it diagonally a little at a time, ``evenly in four locations in an X-shaped order.''
4■ Since a locking nut is used, there is no need to tighten the bolts until the stabilizer is deformed.
5■ Move the stabilizer and check that if there is no play, the installation is complete.

【lastly】
Do a test drive and check again to make sure there is no play between the stabilizer and cavitation plate.

[Product specifications]
■Type: Large
■Color: Black / Gray
■Size: Please check the image.
■Correspondence
→Large: 40 to 300 horsepower outboard motor, inboard/outboard motor

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Applications: 4 types of front lights, 2 types of rear lights, 2 types of bicolor lights, 2 types of white lights
01458: 12V10W
01459: 24V10W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 10W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Application: 01457 → front light three types of light, 01468 & 01469 → red light
01457: 24V20W
01468: 12V30W
01469: 24V30W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 20W & 30W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Application: Application: Gendou, tricolor light
01456: 12V20W
26705: 24V20W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 20W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

[Product specifications]
■Type: Recessed type
■Material: Stainless steel
■Total length: 220mm
■Holder inner diameter: 41mm
[Contents] 5-piece set: rod holder, rubber, stop bolt, intermediate pedestal, and pedestal.
...
■With base gasket integrated rubber cap

This is a stainless steel rod holder made by Atwood.
Comes with a UV-resistant cap to prevent water from entering.

Made by ATTWOOD

[Product specifications]
■Material:
■Size: Diameter/Length/Eye diameter
G-1: 89mm /330mm / 9mm
G-2: 114mm /406mm / 12mm
G-3: 140mm /508mm / 12mm
G-4: 165mm /584mm /19mm
G-5: 216mm /678mm /19mm
G-6: 257mm /762mm /22mm

●Highly weather resistant standard model that protects your boat from scratches ●Polyform's air fender, G series fender.
●Standard bale-shaped design that perfectly matches any ship.

【please note】
*Since it is a sealed type, it will be delivered with air injected.
*Please note that additional air injection is not possible.
POLYFORM Manufactured by POLYFORM

[Product specifications]
■Material: Made of reinforced vinyl
■Diameter: Approximately 20cm

●Multi-use float that can be used as a marker buoy or fender.
●This buoy is ideal for setting up courses for water skiing, wakeboarding, personal watercraft, etc.
●Made of marine grade reinforced vinyl, the same as commonly used air fenders,
It is less susceptible to deterioration due to UV rays.

●Three fluorescent colors that are highly visible even on water.
●It is a product that does not easily fade even after long-term use.

【please note】
Air injection nozzle is not included.
*Please purchase the air injection nozzle (product number: 97560) separately.

56017/Total length A: 136.0mm Shaft diameter B: 12.5mm Recommended roller width: 99.0mm
56018/Total length A: 159.0mm Shaft diameter B: 12.5mm Recommended roller width: 127.0mm

●Can also be used as a fender for slalom buoys and personal watercraft.

●This is a buoy manufactured by Polyform that has an eye on one side only.

●Size: 15×39cm

【please note】
Air injection nozzle is not included.

[Product specifications]
■New standard compliant model/TYPE: A
■Applicable weight: 40kg or more. For both pediatric and pediatric use
■Initial buoyancy: 7.5kg
■ Waist circumference: up to 105cm
■Material: (Body) Polyester, (Buoyancy material) Oil-resistant foamed polyethylene

This is a fixed type life jacket that provides absolute security.
Since it is worn like a vest, it won't come off easily in the event you fall into the water.
The front side is a zipper type.

By replacing the hose,
This is an air pump with excellent cost performance that can be used for both intake and exhaust.
■3 types of adapters are standard equipment

When using on towing tubes, please use a foot pump or hand pump for finishing.

1. 24758: DC12V (Cigarette lighter plug)
■Voltage/Current DC12V/12A
■Air flow rate 280 liters/min
■Maximum pressure 0.05kg/cm2
■Continuous use time approximately 12 minutes

2. 24759: AC100V (outlet plug)
■Voltage/Current AC100V/1.8A
■Air flow rate 300 liters/min
■Maximum pressure 0.06kg/cm2-
■Continuous use time approximately 12 minutes

●10 pieces

●Hose outer diameter:

16mm…for 5/16

18mm…for 3/8

24mm…For primer pump

[Product specifications]
■Material: Plastic
■Size: 76φ×127mm
■Hole diameter: 12mm

●Small and lightweight type makes it convenient to move!
●You can also set up a course or float ropes, etc.

[Product specifications]

■Size: Diameter/Total length/Eye diameter
F-1: 150mm /640mm /18mm
F-2: 191mm /635mm /22mm
F-3: 208mm/635mm/22mm
F-5: 279mm /762mm /24mm

●Polyform's air fender and F fender are extremely strong fenders.
●The eye part is reinforced with thick rubber, making it extremely durable.
●Can withstand the high pressure of not only small ships but also large ships.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97561) sold separately.

[Product specifications]
■Size: Diameter / Total length / Hole diameter
HTM-1: 152mm /381mm /16mm
HTM-2: 203mm /508mm /16mm
HTM-3: 254mm /660mm /16mm

●Polyform's air fender, HTM fender.
●Type with a through hole in the center for the rope to pass through. You can hang the fender with a single rope, which is very convenient when installing it horizontally.
●You can also hang it vertically by making a knot after passing the rope through it.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97561) sold separately.

POLYFORM Manufactured by Polyform

Convenient zipper pockets on both sides.
The length is a short 19 inches, which is a trendy short length.
The waist can be finely adjusted with a string.

■Color: 2 types

■Waist size
30 inches (80cm)
32 inches (85cm)
34 inches (90cm)
36 inches (95cm)
38 inches (100cm)

Board shorts surf pants saltwater pants beach swimming pool resort
Watercraft Watercraft Wakeboard Surfing Flyboard
Kitesurfing Famous Brand Popular JET-PILOT America Australia
Outdoor Marine Activities SURF WAKEBOARD SUP Paddle Board
Kayaking Canoeing Trekking River play Jet skiing

A jacket with a simple and universal design that uses a polyester body liner as the outer material.
The body also has a texture similar to a thin down jacket.

This item shows JETPILOT's attention to detail in detail, such as the left and right front welt pockets with zips and the contrasting design of the hoodie straps.

Although it is simple, it is a useful item as the main outerwear for styling.

■Actual size when laid flat (chest measurement/length)

M size: 120cm/62cm
L size: 125cm/64cm
XL size: 129cm: 67cm

*Please forgive any errors as the measurements are taken by our staff.

This is Annieversary model apparel with the original logo revived.
The brushed lining makes it a little looser, and the fabric isn't too thick, so it's perfect from fall to spring!
Round neck trainers with a simple design are popular among people of all ages.

■Poly/cotton outer body 320gsm fleece brushed lining type

■Actual product size (chest measurement/length)

S: 95cm/70cm
M:100cm/72cm
L:106cm/74cm
XL:116cm/77cm

*Please note that there may be errors due to measurements taken by our staff when placed horizontally.

*American size, one size larger than Japanese size.

[As this is a special price item, we cannot accept returns or exchanges. ]

This is a support collaboration model with the Kawasaki logo.
The lining is satin quilted, giving it a heavy texture similar to that of a jacket.

■Material: Cotton

■Actual product chest measurement S: 100cm
M: 110cm
L: 120cm
*Please allow slight errors due to the actual size measured by our staff when placed horizontally.

[As this is a special price item, we cannot accept returns or exchanges. ]

These board shorts feature gradation lines.
Due to the central waist strap design, only minor adjustments are required.
There is a zip pocket on the right side

■Material: Stretch polyester

■Waist size
30 inches (80cm)
32 inches (85cm)
34 inches (90cm)
36 inches (95cm)
38 inches (100cm)

Board shorts surf pants saltwater pants beach swimming pool resort
Watercraft Watercraft Wakeboard Surfing Flyboard
Kitesurfing Famous Brand Popular JET-PILOT America Australia
Outdoor Marine Activities SURF WAKEBOARD SUP Paddle Board
Kayaking Canoeing Trekking River play Jet skiing

These board shorts have a cool gradation line.
Due to the central waist strap design, only minor adjustments are required.
There is a zip pocket on the side

■Material: Stretch polyester

■Waist size
30 inches (80cm)
32 inches (85cm)
34 inches (90cm)
36 inches (95cm)
38 inches (100cm)

Board shorts surf pants saltwater pants beach swimming pool resort
Watercraft Wakeboard Surfing Flyboard
Kitesurfing Famous Brand Popular JET-PILOT America
Outdoor Marine Activities SURF WAKEBOARD SUP Paddle Board
Kayaking Canoeing Trekking River play Jet skiing

The vertical lines and JETPILOT logo are eye-catching.
The center waist drawstring design allows for only slight adjustments.
There are zip pockets on both sides.

Material: Stretch polyester

■ Waist size
30 inches (80 cm)
32 inches (85 cm)
34 inches (90 cm)
36 inches (95 cm)
38 inches (100 cm)

■Material: 92% polyester, 8% spandex
■Specifications: 1 right leg pocket

■Jetpilot recommended waist size: 28 inches (74-78 cm)
30 inches (78-82 cm)
32 inches (82-86 cm)
34 inches (84-88 cm)
36 inches (86-90cm)
38 inches (88-92 cm)
*Please note that the appropriate size may vary depending on the waist design.

■ Actual size of the product laid flat
28 inch: Waist 76cm Total length 49cm Inseam 24cm
30 inch: Waist 80cm Total length 50cm Inseam 25cm
32 inch: Waist 84cm Total length 51cm Inseam 25cm
34 inch: Waist 90cm Total length 52cm Inseam 25cm
36 inch: Waist 94cm Total length 54cm Inseam 26cm
38 inch: Waist 100cm Total length 55cm Inseam 26cm
*Please note that there may be some errors due to measurements taken by our staff.

Board shorts, surf shorts, swimming trunks, pool, resort, jet ski
Wakeboard Surfing Flyboard Kitesurfing Famous brand Popular JET-PILOT America Outdoor Marine activities SURF WAKEBOARD SUP
Paddle board kayak Canoe Trekking River activities Jet ski Fishing Boat

free size

This Lycra fabric has excellent elasticity and a comfortable fit, making it ideal for use as an inner layer.
The brand logo print at the waist and hem is the highlight.
This is a classic item used as underwear for board shorts and wetsuits.

[Benefits of inner pants]
Its excellent elasticity provides moderate stretch to support muscles, stabilise joints and reduce muscle fatigue during exercise.
Not only does it protect against UV rays, it also prevents chafing when wearing a wetsuit, making it a useful, stress-free support item.

■ Suitable waist size
M size: 75-80cm
L size: 80-85cm
XL size: 85-90cm
2XL size: 90-95cm
*Underwear is a type of product similar to underwear, so returns and exchanges are not possible unless the item is defective.

Jet Ski, Watercraft, Personal Watercraft, Surfing, SUP
Wakeboarding, Diving, Swimming, River Sports, Snorkeling, Marine Sports, Kayak Wetsuits, Swim Trunks, Surf Pants, Board Shorts, Snorkeling, Surfing, Fishing, Boating, Outdoors

Made of Lycra material that has excellent elasticity and fits perfectly as an inner layer. The length has been increased, making it even more comfortable to wear.
Board shorts and wetsuit underwear are standard items.

[Advantages of inner pants]
Because it has excellent moisture retention and elasticity, it supports muscles through moderate stretching, stabilizes joints, and reduces muscle fatigue during exercise.
Therefore, it is perfect as an inner layer for extreme pants or trunks!
It prevents rubbing when wearing a wetsuit and is useful as a stress-free support item.

■Applicable waist size
M size: 75-80cm
L size:80-85cm
XL size:85-90cm
2XL size: 90-95cm
*Due to the delicate nature of underwear, returns and exchanges are not possible.

Skiing Watercraft Watercraft Watercraft Surfing SUP Wakeboarding Diving Beach Swimming in the River Snorkeling Marine Sports Wetsuit Sea Pant Wetsuit Surf Pants Board Shorts

JETPILOT brand CAP
The brim is arched and has a logo patch on the front.
You can also adjust the size with the strap on the back.
The simple and natural design goes well with any outfit.

■Free size

100% cotton is extremely comfortable to wear.

■Material: Cotton

■Product size
M: Chest measurement 100cm/total length 70cm
L: Chest measurement 109cm/total length 72cm

*Please note that there may be errors due to measurements taken by our staff when placed horizontally.
*American size is one size larger than Japanese size.

Board shorts made of stretch material with accent piping and a simple logo patch finish.

Chris O'Shea's signature model.

1. Tech washer tie closure ■Waist size 28 inches (74-78cm)
2. Taped and scalloped block on dual front pockets
3. Sublimated body
4. Back zipper pocket
5. High stitch count patch
6. Lycra fly
7.Triple stitch crotch panel■Length is 19 inches (48.3cm)

30 inches (78-82cm)
32 inches (82-86cm)
34 inches (86-90cm)
36 inches (92-96cm)
*Please note that the applicable size varies depending on the waist design and specifications.

[Please note] As this is a special price item, we cannot accept returns or exchanges.

The neosole is ergonomically formed with just the right thickness to fit the movements of your feet, providing excellent mobility and comfort.
Another feature is that the zipper is located directly behind the Achilles tendon to prevent contact and damage to the hull. The zipper is raised and fastened with a Velcro strap, giving it a high-cut yet stylish look and finish.
Not only is the rear zip easy to put on and take off, but the rubber material on the toe and instep area also improves durability.

■Applicable size
(7) 25-25.5cm
(8) 26-26.5cm
(9) 27-27.5cm
(10)28-28.5cm

Personal Watercraft PWC Watercraft Watercraft
Kawasaki JETSKI Jet Ski Y AMAHA Marinejet Marinejet
BRP SEADD jet boots marine shoes

A life jacket made of wet material that is gentle on children's delicate skin.
This model is thicker than the nylon type and has excellent protection functions.

■MATERIAL Chloroprene

■Applicable height size
M(8-10): 110-120cm
L(12-14): 120-130cm

■Actual waist circumference/length
M(8-10): 70cm/43cm
L(12-14): 78cm/45cm

■US Coast Guard certified product

*Compatible with special legal equipment for small vessels
*When registering children's equipment as legal equipment, please be sure to refer to the website of the Japan Small Vessel Inspection Organization.

This is a long tour coat from the JETPILOT brand.

Functionality is also emphasized, with a center vent that does not restrict movement when sitting on the seat.
The length of the wrist can be adjusted with a wrist closure, and the accelerator and handle work are smooth.
The large pockets on both sides are very convenient.

The width and length are generous, so you can wear it loosely.
2mm neoprene, which has excellent elasticity and heat retention, is comfortable and convenient to wear, so it can be used all year round, and is rapidly becoming popular as a spring/autumn item.

■Chest measurement size M: 85-95cm
L: 90-100cm
XL: 95-105cm
2XL: 100-110cm
3XL: 105-115cm

A long john from the "VAULT" series with a black body and a hologram-like rainbow logo .
Achieve comfortable PWC riding with the brand's highest quality materials .
Uses highly elastic 2mm Flexlite neoprene, knee pads coated with 3D embossed rubber to enhance grip performance and prevent wear, and embossed neoprene panels on the back of the knees that do not cause stress even when bent, making them functional as riding wear. It is a SPEC with
Recommended for those seeking the highest quality fitting, functionality, and visual appeal.

[Long John]
Adopts removable back protection (spine protection) and shock absorption Protech impact protection system on the back (see image) ●Easy to put on and take off with durable YKK ankle and back zip

●Ankle - Deploys a Velcro panel to cover the zipper ●Jet-Lock seam construction increases strength ●Durable EVA Pro-Tech pads on the knees and shins to reduce hits ●Seamless joint panels reduce stress ●Under arm -Lycra panel prevents chafing -Air flow panel provides breathability -Oil slick logo

■Applicable image size (height, weight, chest measurement, waist)
M: 170-175cm, 65-72kg, 95-100cm, 76-81cm
L: 175-180cm, 70-77kg, 100-105cm, 81-86cm
XL: 180-185cm, 77-85kg, 105-110cm, 84-88cm

A side entry vest from the "VAULT" series with a black body and a hologram-like rainbow logo.

Durable nylon and high quality PVC foam ensure high safety standards.
Equipped with a "lanyard WD ring".
The side entry type is less stressful to put on and take off compared to the pullover type.

■Applicable chest size
S/M(80-100cm)
L/XL(100-120cm)

■Actual outside size when placed flat (chest measurement (inside measurement)/total length/torso length)
S/M (104(85)cm/ 53cm/ 28cm)
L/XL(107(88)cm/ 55cm/ 32cm)
*Please note that there may be errors due to measurements taken by our staff.

■US Coast Guard certified product (preliminary inspection product/PWC limited JCI legal equipment compatible)

Personal Watercraft PWC Personal Watercraft
Water bike Kawasaki JETSKI Jet Ski SEADOO
YAMAHA MARINEJET Marine jet life jacket
Small ship special JCI inspection Japan Small Ship Inspection Organization Ship inspection
SUP Wakeboard Marine Sports Wetsuit
River play Beach swimming Life vest Life jacket

This is a JCI preliminary inspection approved life jacket that is compatible with inspections of small special vessels such as jet skis. It is made of soft neoprene material (wetsuit fabric) and has a zipper closure at the front.

Neoprene types are popular not only because they are soft to the touch, but also because of their fit and luxurious feel that nylon types lack.
It is a new type of life vest that is buoyant and fits well to the body, so it can be used not only for personal watercraft but also for all kinds of marine sports.
It also features "super grips" on both sides for tandem riding.

■Applicable chest size

M: 90-95cm (98/92cm)
L: 95-100cm (107/98cm)
XL: 100-105cm (113/106cm)

■US Coast Guard certified product (JCI legal equipment compatible)

Personal watercraft PWC Watercraft Personal watercraft Kawasaki JETSKI Jet ski SEADOO YAMAHA MARINEJET Marine jet Life jacket Small boat special JCI inspection Japan Small Boat Inspection Organization Ship inspection SUP Wakeboard marine sports Wet suit River play Beach bathing Life vest Life jacket

A sports vest perfect for wakeboarding, SUP, etc.

・100% 360° Flex-Lite Ultra neoprene material with the highest elasticity ・Glideskin armhole jet seal for smooth arm and shoulder movement ・License holder on the inside ・Anatomical fit for an excellent fit ・Zipper for hard riding Durable YKK lock zipper so you don't have to worry about it opening - The buckle at the bottom prevents it from shifting against your body.

■Applicable chest size M: 85 -90cm
L: 90-95cm
XL: 95-100cm

*This vest is not certified by JCI small special vessel inspection.
Can be used for wakeboarding, SUP, flyboarding, and snorkeling.
For other sports, please choose a vest that follows the rules.

Protection ★★☆☆☆
Motility ★★★★☆
Buoyancy ★★☆☆☆

A thin COMP type vest that emphasizes ease of movement and fit.

■Product Features Flexlight stretch panels provide the highest level of mobility and comfort Lightweight design for a comfortable fit

*JCI small special vessel inspection certification is not possible*

■Applicable chest circumference size (abdominal circumference actual outer size/actual inner size)
M: 85-90cm
L: 90-95cm
XL: 95-100cm

Wakeboarding Wakesurfing Kiteboarding Surfing Bodyboarding
SUP SUP Paddleboard Flyboard Snorkeling Trekking
Kayak Canoe Marine Sports Marine Activities Banana Boat
Windsurfing WAKEBOARD SURF WATERTOY Rubber boat ZUPBOARD
Sports vest Impact vest Neo vest Wet suit

A light glove suitable for thin high summer wear.
This model eliminates hard padding and focuses on comfort.
The range of coordination is expanded with the wet suit and the color design of the series.
You can also use your smartphone while wearing it.

■Applicable size (hand width/total length/middle finger length)
(S)21.0cm/21.0cm/8.5cm
(M)21.5cm/21.5cm/8.5cm
(L)22.0cm/22.0cm/9.0cm
(XL)23.0cm/23.0cm/9.0cm

*Please note that this is our actual size when laid flat, so please allow slight errors.
(US standard size)

Personal Watercraft (PWC) Watercraft Watercraft
Jet Ski Marine Jet Kawasaki YAMAHA SEADOO JETSKI

360° stretch neoprene JETLITE foam is the lightest and most flexible foam. It has more air bubbles than conventional products, making it more flexible and movable, and is also lighter.

YKK lock zipper adopted

*This is a sports vest that can be used for wakeboarding, SUP, etc.
*JCI small special vessel inspection certification is not possible.

■Applicable waist circumference M:85-95cm
L:90-100cm
XL:95-105cm

Wakeboarding Wakesurfing Kiteboarding Surfing Bodyboarding
SUP SUP Paddleboard Flyboard Snorkeling Trekking
Kayak Canoe Marine Sports Marine Activities Banana Boat
Windsurfing WAKEBOARD SURF WATERTOY Rubber boat ZUPBOARD
Sports vest Impact vest Neo vest Wet suit

A newly designed marine coat exclusively for women.
The stylish silhouette that has an outstanding effect on slimming down your appearance is recommended for a variety of marine leisure activities. The long length that reaches up to the knees provides excellent cold protection, and will keep you warm even on decks or marine fields exposed to the wind.
This marine coat is made with JETPILOT's unique specifications, including the materials used to protect against the cold on decks and ski slopes, as well as the design of the scuba hood.
The length is just right for riding on the JET.

■Material: 1.5mm chloroprene

■Chest size adaptation size
M(10): 80-85cm
L(12): 85-90cm
XL(14): 90-95cm *Female model 170cm wearing size 10(M) posted

A newly designed marine coat exclusively for women.

This marine coat is made with JETPILOT's unique specifications, including the materials used to protect against the cold on decks and ski slopes, as well as the design of the scuba hood.
The half-length finish is perfect for riding on the JET.

■Chest size adaptation size

M(12): 85-90cm
L(14): 90-95cm

*Female model 170cm wearing size 10(M) posted

This is ZAHRA KELL's signature model.
Stretch neoprene accommodates every movement of the rider.
This neoprene vest is flexible and soft to the touch, making it the perfect piece for active scenes.
The liner is made of fire fur material, which is perfect for women as it provides excellent heat retention.
The front zipper makes it easy to put on and take off.
This is a top-quality vest that is lightweight and flexible.

■ Chest size guide

M(10):85-90cm
L(12):90-95cm

*JCI small special vessel inspection certification not available*

Wakeboarding, Wakesurfing, Kiteboarding, Surfing
Bodyboarding, SUP, Paddleboarding, Flyboarding, Snorkeling, Trekking, Kayaking, Canoeing, Marine Sports, Marine Activities, Banana Boat, Windsurfing, WAKEBOARD SURF WATERTOY
Rubber boat ZUPBOARD sports vest Impact vest Neo vest
Wetsuits

This is a long tour coat from the JETPILOT brand.

Functionality is also emphasized, with a center vent that does not restrict movement when sitting in the seat.
The length can be adjusted using the wrist closure, making the accelerator and handlebar operation smooth.
The large pockets on both sides are very convenient.

The width and length are generous, so it can be worn loosely.
2mm neoprene has excellent elasticity and heat retention, and its comfort and convenience mean it can be worn all year round, making it a popular addition to your spring and autumn wardrobe.

For those who have been hesitant to wear a suit set, we recommend coordinating a coat and long pants.

■Chest size M: 85-95cm
L: 90-100cm
XL: 95-105cm
2XL: 100-110cm

■The model in the photo (height 182cm) is wearing a size L