Collection: Maintenance Supplies

[Adaptation] SEADOO 800/951 engine
●A support tool used when removing flywheel bolts.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1. Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" inside the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Compatible models]
SEA-DOO 4-stroke 260/255/230/215/185/155/130 horsepower model ~ until 2017
*Excluding SPARK 2018 and later models
[Information] Please select and use a compatible product.
●300 horsepower model & 2018 and later models *Excluding SPARK...Product number: 420956744
●260/255/230/215/185/155/130 horsepower model ~ until 2017...Product number: 420956741★
●SPARK...Product number: 420956123

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Applicable models] SEA-DOO SPARK, GTI SE90

[Information] Please select and use a compatible product.
●300 horsepower 4 stroke…Product number: 420956744
●260 horsepower or less...Product number: 420956741
●SPARK, GTI SE90... Product number: 420956123★

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
The engine oil can wash away the generated substances, allowing the engine to continue working normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

●A tool for crimping bands on fuel hoses, engine boots, etc.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Capacity] 946ml x 12 bottles (case)
[Compatibility] For ROTAX 587/657/717 engines

Keep your engine clean at all times
Minimizes spark plug misfires.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

[Applications] Multi-purpose rust inhibitor for corrosion prevention and rust prevention.
[Contents] 400g

A multi-purpose rust inhibitor that penetrates quickly and prevents rust and corrosion.
Suitable for use in seawater and humid environments.
Highly recommended for maintenance inside the engine after using PWC.

SEADOO genuine product

Synthetic oil ideal for maintenance of SEA-DOO jet pumps.

maintenance supplies

●Contents: 177ml

SEA-DOO Since this is a genuine product, we cannot accept returns or exchanges.

Spray solvent to clean the outside of the engine.
Used to remove dirt such as grease and oil.

Contents: 400g

[Application] For corrosion prevention and rust prevention
[Contents] 350g

Effective in preventing corrosion and rust of engine parts during storage.
This is especially effective when storing for long periods of time.

SEADOO genuine product

[Application] Deterioration prevention agent added to residual fuel
[Contents] 240ml

●Adding to remaining fuel during long-term storage prevents deterioration.
●Estimated usage: Approximately 1 bottle is used for 76L of fuel.

*Liquid color and packaging are subject to change without notice.
*Since this is a genuine product, we cannot accept returns or exchanges.

Developed to maximize the performance of the Rotax engine
Primix coolant.

■Capacity: 946ml
maintenance supplies

[Capacity] 946ml x 12 bottles (case)
[Compatibility] For ROTAX 787/787RFI/947/947DI engine

A further evolution of conventional synthetic oil,
Developed for ROTAX 2-stroke cab models, RFI and DI engines.

[Contents] 473ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastics, anodized aluminum, etc.
It is effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Contents] 296ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastic, anodized aluminum, etc.
[Effects] Effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

Used between the oil pan and the block where there are relatively many gaps.
A one-component, room temperature curing, oxime-free silicone sealant that is non-corrosive, low volatility, highly flexible and has excellent oil resistance. Ideal for sealing places where the flange mating surface changes due to vibration, such as press-formed covers.
Operating temperature (℃): -70 to 260
Dry to the touch 30 minutes, curing time 24 hours

Gear cases, pumps, heat exchangers, compressor engines, etc.
A liquid sealant that can be used as a molded gasket for all types of metal flanges.
It can seal leaks caused by surface scratches, damage, small distortions, etc.
Solved the problem of molded gaskets sagging, eliminating the need for retightening.
Improves the rigidity of the flange joint.

●Contents: 50ml
●Operating temperature (℃): -55 to 150

●For general metal threaded pipe fittings. Contains Teflon so there is no galling when tightening.
●It has high clay and thixotropic properties, so even large diameters have instant sealing properties.
●Low strength type that can be removed using regular tools.

【detail】
●Contents: 50ml
●Breakdown/Escape Torque (N・m): 7
●Operating temperature range: -55 to 150℃

medium strength 243

●Contents: 50ml (liquid type)
●Recommended screw diameter: M6 to M20
●Breakdown/Escape Torque (N・m): 20/7
●Temperature range (℃): -55 to 150
●Color: Blue

[Product specifications]
■Capacity: 6 gallons / 22.7 liters
■Size: L552 x W375 x H267mm (*Height is up to the cap surface)
■Gauge is included with the main unit

【please note! ]
Since this product does not comply with the Fire Service Act, it cannot be refueled directly from a gas station.
Please use after transferring from a tank that is certified by the Fire Service Act.

*Hose mounting fittings are not included with this tank. Please purchase separately.
The fittings installed on the tank vary depending on the outboard motor manufacturer.

A high-density polyethylene fuel tank for outboard motors.
Since it is made of polyethylene, there is no need to worry about rust and it is resistant to corrosion.

■Capacity: 12 gallons / 45 liters
■Size: Length 610 x Width 450 x Height 255mm

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・One small parcel is delivered per item, and from the second item onward, shipping fee x (number of items) will be charged.

【please note! ]
Since this product does not comply with the Fire Service Act, it cannot be refueled directly from a gas station.
Please use after transferring from a tank that is certified by the Fire Service Act.

*Hose mounting fittings are not included with this tank. Please purchase separately.
The fittings installed on the tank vary depending on the outboard motor manufacturer.

A high-density polyethylene fuel tank for outboard motors.
Since it is made of polyethylene, there is no need to worry about rust and it is resistant to corrosion.

■Capacity: 12 gallons / 45 liters
■Size: Length 575 x Width 355 x Height 330mm

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・One small parcel is delivered per item, and from the second item onward, shipping fee x (number of items) will be charged.

【please note! ]
Since this product does not comply with the Fire Service Act, it cannot be refueled directly from a gas station.
Please use after transferring from a tank that is certified by the Fire Service Act.

*Hose mounting fittings are not included with this tank. Please purchase separately.
The fittings installed on the tank vary depending on the outboard motor manufacturer.

[Contents] 2L
[How to use] For removing red rust, blue rust on the hull, removing stains from the wood of the deck, and cleaning light oily substances.

It does not cause corrosion damage to painted surfaces or metal surfaces of the hull, and the luster of the hull does not disappear.

▼How to use▼
Wet the area to be cleaned with water before use.
For normal use, dilute it 3 times and adjust the concentration depending on the degree of dirt.
Using rubber gloves, thoroughly soak a brush, sponge, or cloth in detergent and scrub depending on the degree of dirt.
Be sure to rinse thoroughly with plenty of tap water within 2 minutes to ensure that no Hytrail ingredients remain.
Wipe off moisture with a dry cloth.

*Please try it in an inconspicuous place before use.
*Do not leave it on for more than 2 minutes as it may change color.

Notes
・Never use a spray bottle.
・Do not use on glass surfaces such as automobiles or aluminum parts of vehicles.
・Please do not use the product under the blazing sun or when the product is hot, as stains and uneven color may occur and will be difficult to wipe off.
・Please do not use coatings (mirror finishing, etc.) or painted areas as they will peel off.

A coating agent containing fluorine-modified silicone.
For protecting and polishing gel coat surfaces of boats and PWCs!
For reproducing black color and polishing resin moldings and gunwales!

■Construction guideline
Aerosol 420ml, application area: approximately 3 to 5.24 feet 2 bottles for ships, 1 bottle for PWC
■Construction method
1. Remove dirt and debris from the area to be applied with a cleaning agent and dry.
2.Apply Marine Glass Coat and spread it over the entire surface using a cloth such as a microfiber cloth.
3. Let it dry at room temperature for about 3 to 8 hours.

●Marine Glass Coat is a coating agent for ship hulls that contains fluorine-modified silicone.
●By forming a glass-like film on the gel coat or painted surface, it creates a glossy luster, and
The water repellent effect reduces the adhesion of dirt and rust, making subsequent cleaning easier◎
●It cures easily at room temperature, so you can easily apply the coating yourself.
It can be used for FRP, so it can be used not only for boat hulls but also for camper shells etc.

[Product Specifications]
■Ideal for carrying spare fuel! Since it is a plastic tank, there is no need to worry about rust, and it is lightweight and easy to carry.

■The included nozzle has an air intake vent, allowing you to pour fuel smoothly.

■Size: Approx. 265 x 250 x 135 mm
■Aperture: Φ40mm
■Material: HDPE (high density polyethylene)
Capacity: 5 liters

*The product is a hazardous materials transport container that complies with international recommendations (UN standards) regarding the international transportation of hazardous materials.
*Although this product is UN certified, it may not be possible to fill it up at gas stations, including self-service stations.
*This product cannot be refueled and transported in a passenger vehicle for the purpose of using it as automobile fuel. (*1)
*This product cannot be used for refueling for storage purposes (*2).

(*1) Notification prescribing details of technical standards for the control of dangerous goods (Article 68-4), Regulations on the Control of Hazardous Materials (Article 43-2)
(*2) Fueling for storage purposes refers to fueling for stockpiling. This does not apply if the purpose is to use it immediately. There is no clear definition of the time between refueling and use.

[Product specifications]
●12V power can be easily extracted from the cigarette lighter socket and terminal.

●Compatible with taking out electric power! This is a new type of battery BOX whose main terminal has a 60A circuit breaker.

●In accordance with modern needs, it is also equipped with a USB charger socket.

●Equipped with a battery level gauge, so you can conveniently check the remaining battery level with the touch of a button without having to open the lid.

●Socket type: Cigarette lighter (1 burner), USB (2 burners)
●USB socket specifications: Output voltage (DC5V)/Output current (2.1A)
●Built-in breaker: 10A (cigar socket)/60A (main terminal)
●Breaker type: manual reset
●Compatible battery: For 105A or less
-External dimensions: W420 x D230 x H335mm
-Inner dimensions: W340 x D190 x H225mm
(There is a protrusion on the back of the lid to hold the battery in place.)

*If more than the specified current flows, the breaker will operate and shut down the current.
After tripping the breaker, wait a sufficient amount of time before pressing the reset button.

■Material (pump): ABS resin
■Size:
Total length: Approximately 53cm (including grip)
Pump body: approx. 44φmm
Hose length: approx. 60cm

●It is a hand pump type bilge pump.
●Since it does not require electricity, it can be used anywhere.
●It is also effective for replacing water in aquariums such as tropical fish.

[Contents] 946ml
●Brightener (product number: 32092): Brightener adds moisture and shine to wood. If there is dirt on the work surface, remove the dirt with a cheek cleaner, then rub in this agent with a sponge or brush. Leave it on for about 5 minutes, then rinse it off with water and you're done.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

[Contents] 946ml

●Cleaner (product number: 32251): The cleaner removes dirt such as oil from wood, fish blood, and dullness. After applying this agent, please rub it lightly with a brush. Leave it on for about 15 minutes and then wash it off with water.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

[Contents] 3.79L

●A biodegradable and environmentally friendly bilge cleaner. Decomposes oil, grease, gasoline, diesel oil and sludge. The recommended usage is 0.95L for a 25-foot boat.

●If the bilge is dry, pour fresh water into the bilge, let it sit for about an hour, then run the boat before draining. Cleans and refreshes the smell of bilges such as engine rooms.

[Contents] 0.95L

●A biodegradable and environmentally friendly bilge cleaner. Decomposes oil, grease, gasoline, diesel oil and sludge. The recommended usage is 0.95L for a 25-foot boat.

●If the bilge is dry, pour fresh water into the bilge, let it sit for about an hour, then run the boat before draining. Cleans and refreshes the smell of bilges such as engine rooms.

[Contents] 946ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] For fabrics such as awnings and convertible roof fabrics (sun protection, water repellency, etc.)

●A strong film is formed on the surface of the fabric, providing waterproof effects and preventing deterioration such as fading due to UV rays.
Continuous use will maintain the original color of the fabric over many years and prevent the growth of mold.

●Sun protection, water repellency, stain resistance, and mold prevention agent for fabrics (acrylic, Dacron, olefin, cotton, etc.).
●Awnings, convertible roof fabrics, curtains, outdoor wear, Gore-Tex products,
Valid for tents, umbrellas, backpacks, rucksacks, canvas shoes, etc.

【please note】
Cannot be used on vinyl, plastic, rubber, synthetic leather, or FRP.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

●This tank is JCI (Small Ship Inspection Institute) certified product.
●High-density polyethylene fuel tank for outboard motors.
●There is no need to worry about rust, and it is resistant to corrosion, so it can be used as a spare or an extension depending on the space on the ship.

[Product specifications]
■Capacity: 3 gallons / 11.3 liters
■Size: Length 360 x Width 270 x Height 235mm
■Air vent cap
■See-through type (no fuel gauge)

【please note! ]
Since this product does not comply with the Fire Service Act, it cannot be refueled directly from a gas station.
Please use after transferring from a tank that is certified by the Fire Service Act.

*Hose mounting fittings are not included with this tank. Please purchase separately.
The fittings installed on the tank vary depending on the outboard motor manufacturer.

medium strength 222

●Contents: 50ml (liquid type)
●Recommended screw diameter: M12 or less
- Destruction/escape torque (N m): 6/4
●Temperature range (℃): -55 to 150
●Color: Purple

●High-density polyethylene fuel tank for outboard motors.
●There is no need to worry about rust, and it is resistant to corrosion, so it can be used as a spare or an extension depending on the space on the ship.

[Product specifications]
■Capacity: 6 gallons / 22.7 liters
■Size: Length 590 x Width 300 x Height 235mm
■Air vent cap with gauge

【please note! ]
Since this product does not comply with the Fire Service Act, it cannot be refueled directly from a gas station.
Please use after transferring from a tank that is certified by the Fire Service Act.

*Hose mounting fittings are not included with this tank. Please purchase separately.
The fittings installed on the tank vary depending on the outboard motor manufacturer.

●High-density polyethylene fuel tank for outboard motors.
●There is no need to worry about rust, and it is resistant to corrosion, so it can be used as a spare or an extension depending on the space on the ship.

[Product specifications]
■Capacity: 3 gallons / 11.3 liters
■Size: Length 360 x Width 270 x Height 235mm
■Air vent cap
■See-through type (no fuel gauge)

【please note! ]
Since this product does not comply with the Fire Service Act, it cannot be refueled directly from a gas station.
Please use after transferring from a tank that is certified by the Fire Service Act.

*Hose mounting fittings are not included with this tank. Please purchase separately.
The fittings installed on the tank vary depending on the outboard motor manufacturer.

●An air vent and O-ring set exclusively for stainless steel portable cans.
●Please use as a spare or in case of damage or loss.

*AB-10 / AB-10F / AB-20 / AB-20F Stainless steel carrying cans only
Repair Parts

●Aluminum cap exclusively for stainless steel cans.
●Please use as a spare or in case of damage or loss.

*AB-10 / AB-10F / AB-20 / AB-20F Stainless steel carrying cans only
Repair Parts

●This is a set of bellows nozzle and gasket for stainless steel portable cans.
●Please use as a spare or in case of damage or loss.

Nozzle spout (tip) dimensions:
Inner diameter: approx. 19-20mm
Outer diameter: approx. 22-23 mm
Pipe length: 24cm

*AB-10 / AB-10F / AB-20 / AB-20F
Repair parts for stainless steel portable containers