Collection: maintenance supplies

■Correspondence:
KAWASAKI 4 stroke model
SEA-DOO 4 stroke model

■Application: Tool to apply lubrication to the throttle body to prevent it from sticking.

●A must-have item for those riding in seawater!
●Inject lubricant to prevent the throttle body from sticking.

[About installation]
It is necessary to make a hole in the intake pipe using a drill. Install it in front of the genuine throttle body.

[Product specifications]
■A tire bearing included ■Air tire with tube

■Tire outer diameter: 385φ
■Tire width: 90mm
■Shaft diameter: 25.4Ф
■Boss width: 82mm
■Weight: 2.5kg
■Tire stamp: 4.8/4.00-8
■Wheel stamp: 220-70
■Air pressure: 0.8-1.0kg

【please note】
It may not be possible to use it with conventional launchers.
If you need confirmation, please contact us at the time of ordering.
(Please note that we cannot confirm compatibility with other companies' products)

[Product information]
●To prevent scratches and damage, you cannot specify "combined packaging" with other products.
-This product is shipped directly from the manufacturer, so "cash on delivery" and "combined packaging" are not possible.

●When applying lubricant to the throttle or choke wire,
It is very convenient as it allows you to efficiently apply lubricant inside the wire.

[Disclaimer]
*Color may vary depending on shipping time. please note that.

SUZUKI outboard motor aftermarket product Protection anode Equivalent to genuine product number "55321-87J01" ■1 set of 5 pieces

[Material] Anti-corrosion zinc [Compatibility] Used in: SUZUKI outboard motor 4-stroke model

-Gear case: DF2, DF5, DF5A/6A, DF8A/9.9A, DF9.9B/15A/20A, DF70A/80A/90A

-Drive shaft housing: DF5/DF25(V2)/DF60AV

-Cylinder head: DF8A/9.9A, DF9.9B/15A/20A, DF40/50('05-), DF40A/50A/60A/60AV, DF70A/80A/90A, DF90(421060-), DF115(421141-) )・DF150/175/150TG/175TG・DF200A/200AP・DF200/225/250・DF300/250AP/300AP

-Cylinder block: DF40/50・DF40A/50A/60A/60AV・DF100A(510032-)・DF115A(510411-)・DF140A(510550-)・DF150/175/150TG/175TG・DF200A/200AP

- Clamp bracket (PTT specification only): DF9.9B/15A/20A, DF25(V2), DF25A/30A, DF40A/50A/60AQ specification ('15-), DF60AV

●Swivel bracket: DF9.9B/15A/20A (PTT specification + transom L/X only)・DF25(V2)・DF25A/30A・・DF150/175/150TG/175TG

-PTT (PTT specification only): DF9.9B/15A/20A, DF25/30 (3 cylinder), DF25A/30A, DF40/50 ('01-), DF40A/50A/60A/60AV, DF60/70 (' 01-)

●Oil pan: DF25(V2)・DF200A/200AP・DF200/225/250・DF300/250AP/300AP

●Case, extension (LL specification only):・DF25(V2)

-Gas assist (gas assist specification only):・DF25(V2)・DF25/30(3 cylinder)・DF25A/30A・DF40/50('01-)・DF40A/50A/60A/60AV

-Exhaust cover: DF25/30 (3 cylinders), DF70A/80A/90A, DF150/175/150TG/175TG, DF200/225/250, DF300/250AP/300AP

●Exhaust manifold: DF25A/30A・DF60/70
●Extension case: DF70A/80A/90A (transom X specification)
●Rectifier: DF90/100/115/140/100A/115A/140A
●Propeller shaft housing: DF300(-'11)

SUZUKI outboard motor aftermarket product Protection anode Equivalent to genuine product number "55321-87J01"

[Material] Anti-corrosion zinc
[Compatibility] Used in: SUZUKI outboard motor 4-stroke model

-Gear case: DF2, DF5, DF5A/6A, DF8A/9.9A, DF9.9B/15A/20A, DF70A/80A/90A

-Drive shaft housing: DF5/DF25(V2)/DF60AV

-Cylinder head: DF8A/9.9A, DF9.9B/15A/20A, DF40/50('05-), DF40A/50A/60A/60AV, DF70A/80A/90A, DF90(421060-), DF115(421141-) )・DF150/175/150TG/175TG・DF200A/200AP・DF200/225/250・DF300/250AP/300AP

-Cylinder block: DF40/50・DF40A/50A/60A/60AV・DF100A(510032-)・DF115A(510411-)・DF140A(510550-)・DF150/175/150TG/175TG・DF200A/200AP

- Clamp bracket (PTT specification only): DF9.9B/15A/20A, DF25(V2), DF25A/30A, DF40A/50A/60AQ specification ('15-), DF60AV

●Swivel bracket: DF9.9B/15A/20A (PTT specification + transom L/X only)・DF25(V2)・DF25A/30A・・DF150/175/150TG/175TG

-PTT (PTT specification only): DF9.9B/15A/20A, DF25/30 (3 cylinder), DF25A/30A, DF40/50 ('01-), DF40A/50A/60A/60AV, DF60/70 (' 01-)

●Oil pan: DF25(V2)・DF200A/200AP・DF200/225/250・DF300/250AP/300AP

●Case, extension (LL specification only):・DF25(V2)

-Gas assist (gas assist specification only):・DF25(V2)・DF25/30(3 cylinder)・DF25A/30A・DF40/50('01-)・DF40A/50A/60A/60AV

-Exhaust cover: DF25/30 (3 cylinders), DF70A/80A/90A, DF150/175/150TG/175TG, DF200/225/250, DF300/250AP/300AP

●Exhaust manifold: DF25A/30A・DF60/70
●Extension case: DF70A/80A/90A (transom X specification)
●Rectifier: DF90/100/115/140/100A/115A/140A
●Propeller shaft housing: DF300(-'11)

SUZUKI outboard motor protection anode equivalent to genuine product number "55320-95311"
■1 set of 3 pieces

[Material] Anti-corrosion zinc
[Compatibility] Used in: SUZUKI outboard motor 4-stroke model

●Bracket: DF9.9/15(-'00)

- Clamp bracket: DF25/30 (3 cylinder), DF40/50, DF40A/50A/60AQ specifications (-'14)

●Extension case: DF60/70 (Transom X specification only)

SUZUKI outboard motor protection anode equivalent to genuine product number "55320-95311"

[Material] Anti-corrosion zinc
[Compatibility] Used in: SUZUKI outboard motor 4-stroke model

●Bracket: DF9.9/15(-'00)

- Clamp bracket: DF25/30 (3 cylinder), DF40/50, DF40A/50A/60AQ specifications (-'14)

●Extension case: DF60/70 (Transom X specification only)

SUZUKI Outboard Motor Protection Anode Equivalent to genuine part number "55320-94900" ■1 set of 2

[Material] Anti-corrosion zinc [Compatibility] Used in: SUZUKI outboard motor 4-stroke model

- Clamp bracket: DF60A (tilt specification only), DF60/70, DF70A/80A/90A, DF90/100/115/140/100A/115A/140A, DF150/175/150TG/175TG, DF200A/200AP, DF200/225 /250・DF300/250AP/300AP

SUZUKI outboard motor protection anode equivalent to genuine product number "55320-94900"

[Material] Anti-corrosion zinc
[Compatibility] Used in: SUZUKI outboard motor 4-stroke model

- Clamp bracket: DF60A (tilt specification only), DF60/70, DF70A/80A/90A, DF90/100/115/140/100A/115A/140A, DF150/175/150TG/175TG, DF200A/200AP, DF200/225 /250・DF300/250AP/300AP

*We cannot accept delivery to private residences as this is a limited delivery item specified by a corporation/trade name (work place, etc.). *
Currently, we are unable to reflect the regular shipping charges when placing an order.
Therefore, please note that we will correct the specified shipping fee and provide new information.

●Hokkaido ¥18,700
●Tohoku ¥10,450
●Kanto/Shinetsu ¥9,900
●Hokuriku/Chubu/Kansai ¥9,900
●Chugoku/Shikoku ¥8,800
●Kyushu ¥9,900
*For Okinawa and remote islands belonging to each prefecture, we will provide a quote on a case-by-case basis, so please let us know.

●This is a boat platform that is ideal for maintenance and display of PWCs, boats, etc.
●Height can be adjusted to match the trailer loading platform.
●Equipped with locking swivel casters (2 on each side) for easy movement.
●The surface of the frame is galvanized (hot dip galvanized) and has excellent corrosion resistance.
*The bank part is made of wood*

[Notes when ordering]
*Since this is a made-to-order item, we cannot accept cancellations or changes after ordering.
*As this is a limited-edition product for corporations, we cannot accept delivery to private residences.

[Product specifications]
-Total length x height x width: 1,830 x 430 x 690mm
-Fixed casters x 2, flexible casters (with stopper) x 2

[Product information]
●Cannot be bundled...To prevent scratches and damage, "combined packaging (combining)" with other products is not possible.
●No returns or exchanges...Due to the characteristics of the product, we cannot accept returns or exchanges after shipping.
●Directly shipped items...Due to their large size, they will be shipped directly from the manufacturer.
●Items with designated shipping charges...Please check the shipping instructions.
●Cash on delivery payment not possible

Water-resistant grease that is effective against oxidation and seawater.

●A necessary grease gun for injecting grease from the grease nipple of the bearing protector.

[Compatible models]
YAMAHA
YS-CD
YS-TP

■Material: Aluminum

[Adaptation]
YAMAHA
For YS-DF
For YV-CD

■Material: Aluminum

[Compatible models]
SEA-DOO SRX/SRZ

■Material: Aluminum

[Compatible models]
SEA-DOO SR 24mm shaft

■Material: Aluminum

[Compatible models]
YAMAHA YD (Concorde)
*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

[Compatible models]
KAWASAKI KA/KF/KG
YAMAHA YF/YG/YH (※)
*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

[Compatible models]
YAMAHA
YD (excluding Concorde) 18mm shaft
*For 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

[Compatible models]
YAMAHA Yamaha 15mm shaft
YB/YD (excluding Concorde)
*Part number "SL009" is compatible with 760RZ/760VN and XL800.

[Compatible models]
YAMAHA
YB/YD (excluding Concorde) 18mm shaft

*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

[Compatible models]
KAWASAKI Kawasaki :KH
SEA-DOO: ALL (excluding SR/SRX/SRZ)
YAMAHA Yamaha: YQ(※)

(*) YAMAHA 760RZ/760VN, XL800 is compatible with product number "SL009".

●Made of aluminum, cavitation is reduced compared to rubber.

[Compatible models]
For YAMAHA Yamaha 144 pump
*Cannot be attached to SJ and slimline impellers.

[Adaptation]
Compatible with 16CLB and 20LBS.

●It has been praised for its excellent ability and durability with a self-discharge rate of approximately 1/7 or less, as well as its high safety.
●It is called the ultimate deep cycle battery because it is ultra-compact and ultra-light, and it provides 100% of the performance of vehicles and boats.
It is possible to withdraw it.
※※In order to fit this ultra-small and ultra-light battery into the battery case of the hull, several types of foam pads of different sizes are also included, so you can adjust and install it.

[Size] Width 166 x Height 86 x Height 155 (mm)
[Weight] 1,640g

●A 5-pin BMS port is used exclusively for LFX lithium ferrite batteries, which monitors and diagnoses each cell during charging to always maintain the best balance. It also has an optimal storage mode that allows you to use the LFX until the end of its life.

【specification】
◆Charging current: 2A peak Maximum output: 30W
◆Input voltage: 100V.250V, 50/60Hz, AC single phase Charging type: CC/CV Voltage: 14.4V terminal
◆Size: Height 11.4 x Width 11.4 x Height 3.8 (cm)
◆Weight: 720g (excluding cable)

【set content】
Shorai BMS01-JP charger body, AC input cord (for Japan), long cable for battery charging (12V), short cable for charging extension (12V), user guide

●O-ring for Salt Away mixer (SA-M)

[Compatibility] For YAMAHA 1800/1200/1100/800/760

●Set of undiluted solution 945ml + mixer + flash kit

[Application]
Preventing salt damage such as corrosion and rust due to the influence of salt
For flushing marine engines, cleaning hulls, drives, cars, and trailer undercarriages.

●Acts directly on salt to remove salt buildup, corrosion, dirt, etc., protecting tools from salt damage.
●Contains no harmful substances and is 100% biodegradable, making it environmentally friendly and safe to use.

●Not only marine products but also various items used in coastal areas,
They suffer from problems such as corrosion and rust due to the effects of salt.
Salt Away is a strong ally for those who have problems with salt damage!

●Salt Away (salt corrosion inhibitor) that can be effectively washed with water.

[Compatibility] KAWASAKI ULTRA310/300/260/250/LX/STX-15F/12F/SX-R
SEA-DOO 2010 and later models ALL (RXT as 260 RS 2012 and later models excluded)

●3784ml of stock solution + mixer + hose adapter

[Application]
Preventing salt damage such as corrosion and rust due to the influence of salt
For flushing marine engines, cleaning hulls, drives, cars, and trailer undercarriages.

●Acts directly on salt to remove salt buildup, corrosion, dirt, etc., protecting tools from salt damage.
●Contains no harmful substances and is 100% biodegradable, making it environmentally friendly and safe to use.

●Not only marine products but also various items used in coastal areas,
They suffer from problems such as corrosion and rust due to the effects of salt.
Salt Away is a strong ally for those who have problems with salt damage!

●Salt Away (salt corrosion inhibitor) that can be effectively washed with water.

●Set of undiluted solution 945ml and mixer

[Applications] Preventing salt damage such as corrosion and rust due to the influence of salt. For flushing marine engines, cleaning the hull, drive, car, and trailer undercarriage.

●Acts directly on salt to remove salt buildup, corrosion, dirt, etc. and protect tools from salt damage.
●Contains no harmful substances and is 100% biodegradable, making it environmentally friendly and safe to use.
●Not only marine products but also various products used in coastal areas suffer from problems such as corrosion and rust due to the effects of salt.

Salt Away is a strong ally for those who have problems with salt damage!

●Salt Away (salt corrosion inhibitor) that can be applied effectively at the same time as washing with water.
●Can also be used to clean wet suit and dry suit zippers!

<About the dedicated mixer>
●Pour the Salt Away stock solution into the mixing cup and connect the hose to the connector.
●6.2 gallons (23.7 kg) of diluted liquid comes out for 1 cup (177 g).
●Can be switched to 3 stages: SALT-AWAY (mixture), RINSE (water only), and OFF.

*The quick connector specifications have been changed and the outlet side connector is now a one-touch connector.

[Image 2] Example of use on KAWASAKI ULTRA300X [Image 3] Can be switched to 3 stages: SALT-AWAY (mixture), RINSE (water only), and OFF.

*Put Salt Away in the mixer and connect the water hose to use as shown in the usage example.

[Applicable models] For KAWASAKI Ultra150-A1 model only (genuine product number: 92070-3704)

●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

■Additive for storing fuel in a marine jet for long periods of time, such as during the winter.
■Prevents gasoline deterioration and keeps the fuel system clean and suppresses corrosion.
■A must-have item for 4-stroke and catalyst models!
■Made in the USA
■Capacity 355ml (12oz)

■Category 4, 2nd petroleum, danger level 2
■Flash point: 11.0℃, boiling point 82.2℃

[How to use]
Add 3 ml of this agent to 1 liter of gasoline.
If stored for more than 2 months,
Add 8 ml of this agent to 1 liter of fuel, fill up the tank, start the engine, and circulate combustion through the fuel system.

[Applicable models] For KAWASAKI Di model only (genuine product number: 92070-3705)

●Sold in units of one. Please purchase as many as you need.
*The image is an image photograph.

[PWC compatible models]
KAWASAKI For Kawasaki 4 stroke

For ULTRA series
250X
260X/260LX
300X/300LX
310X/310LX/310SE/310R

●KAWASAKI genuine product number: 92070-3707

[Adaptation] SEADOO
300 horsepower / 2018 model below 260 horsepower
(*Excluding Spark/GTI90)

■Set contents
[1] Synthetic blend oil 946ml [Product number: 779133] x 12
[2] Aftermarket oil filter (with O-ring) [Product number: JL009-300] x 3

A set for oil change for 3 seadoos.
This is a sharing package that is recommended for group purchases with friends as it contains 12 bottles of oil!

■Replacement guideline (per unit)
*Tank capacity 5.0L
*Normally the amount required for oil change is 2.7-3L.
*Please note that there may be more missing depending on the work content.

[Correspondence] KAWASAKI
ULTRA310(14-)
ULTRA300(11-13)
ULTRA LX(12-)
1500SX-R(17-)
STX15F(14-)

■Set contents
[1] Kawasaki genuine S4 oil (J0146-0012-1) 4L x 1
[2] Kawasaki genuine S4 oil (J0146-0011) 1L x 1
[3] External oil filter (JL013) x 1
[4] JETRENU PURPLE (JR-1001) 473ml×1

■About oil change
*Based on the information in the service manual,
The amount required for a normal oil change is set, but depending on the work involved, more than 5L may come out.
In that case, please prepare Kawasaki S4 SG10W-40 oil separately.

■JR-1001 JETRENU PURPLE details
Wash & Wax. A small amount produces surprisingly rich lather, removes dirt from boat hulls and trailers, provides a glossy finish, and provides long-lasting UV protection.
We recommend that you use this 473ml size first. It's just the right amount to use up in one season.

[Applications] Personal watercraft, cars, boats, motorcycles
[Applications/Effects] Cleaning and waxing. Achieves a glossy finish and maintains UV protection
[Contents] 473ml (approx. 15 jet ski washes/when using 30ml each time)
[How to use] Pour about 30ml of this product into an empty bucket, dilute it with water, and polish the hull with a sponge or soft brush. If you use a foam gun, please dilute it according to your preference.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.If swallowed, drink a glass of water and seek medical attention immediately.
4. If it gets into your eyes, immediately rinse with plenty of water.
5. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

[Correspondence] KAWASAKI
ULTRA310(14-)
ULTRA300(11-13)
ULTRA LX(12-)
1500SX-R(17-)
STX15F(14-)

■Set contents
[1] Kawasaki genuine R4 oil (J0148-0002-1) 4L x 1
[2] Kawasaki genuine R4 oil (J0148-0001) 1L x 1
[3] External oil filter (JL013) x 1
[4] JETRENU PURPLE (JR-1001) 473ml×1

■About oil change
*Based on the information in the service manual,
The amount required for a normal oil change is set, but depending on the work involved, more than 5L may come out.
In that case, please prepare Kawasaki R4 SG10W-40 oil separately.

■JR-1001 JETRENU PURPLE details
Wash & Wax. A small amount produces surprisingly rich lather, removes dirt from boat hulls and trailers, provides a glossy finish, and provides long-lasting UV protection.
We recommend that you use this 473ml size first. It's just the right amount to use up in one season.

[Applications] Personal watercraft, cars, boats, motorcycles
[Applications/Effects] Cleaning and waxing. Achieves a glossy finish and maintains UV protection
[Contents] 473ml (approx. 15 jet ski washes/when using 30ml each time)
[How to use] Pour about 30ml of this product into an empty bucket, dilute it with water, and polish the hull with a sponge or soft brush. If you use a foam gun, please dilute it according to your preference.

【Notes】
1. Please keep out of reach of children.
2. Please use gloves, mask, goggles, etc. to protect your body.
3.If swallowed, drink a glass of water and seek medical attention immediately.
4. If it gets into your eyes, immediately rinse with plenty of water.
5. If it comes in contact with your skin, wash it off immediately.

[Disclaimer]
*Package design and shape may differ from the photo depending on arrival time.

[Compatible models]
KAWASAKI KAWASAKI *Excluding 550/650(-96) and 800X-2

SEA-DOO 4 stroke (16-) SPARK Spark

■Since it is a ready-to-use battery, it can be used for about 30 minutes after injecting electrolyte.
■If the product is at low temperatures or has not been used for a long period of time, please charge it for 1 to 2 hours before using it.
*You can use it for a long time by constantly maintaining it so that it does not fall below 12.3V.
*For model compatibility, please refer to [Click here for compatibility table] below the image.

●Maintenance-free battery, no need to replenish fluid.
●Calcium battery ■Size: Width 175 x Height 88 x Height 155mm

[Quantity] 1L x 12 pieces set
[Applicable] 2-stroke mixing/separation DI/catalyst compatible Leisure
[Quality] TC-W3

●Excellent rust and corrosion resistance against freshwater and saltwater,
●Prevents plug dirt, ring adhesion, and carbon accumulation.
●High-temperature oil film strength and stability in high-temperature ranges protect high-speed rotation under harsh conditions.

[Quantity] 1L x 12 pieces set
[Applicable] 2-stroke mixing/separation DI/catalyst compatible racing

●Excellent lubrication performance under harsh operating conditions in the high rotation range,
This is the highest quality oil that brings out the full performance of high-performance engines by maintaining the liquid state due to high temperatures.

[Compatible models]
KAWASAKI Jet Ski ALL Model
YAMAHA Marine Jet ALL model
SEADOO 4-stroke model (2016 or later) / SPARK(※)
*Please use 30 for 4-stroke models up to 2015.

[Compatibility] ■Yuasa
YTX20, YTX20L, YTX20BS, YTX20HBS, YTX20LBS, YTX20HLBS, YTX20HLBSPW,
YTX20H, YTX20HL, YTX20HL-PW,
YB16A, YB16A2, YB16B, YB16B2, YB16HLACX, SYB16LB, YB16LA, YB16LA2,
YB16LB, YB16LB2, YB16CB, YB16CLB

【Product Specifications】
MHTX20
■Size (mm): L:175 W:87 H:155
■Spacer (mm): Bottom: 20mm Side: 13mm
■Voltage (V): 12V
■Cold cranking ampere (CCA): 550A
■Capacity (10HR): 15Ah

Next-generation battery that follows the benefits of lithium-ion AGM batteries
Embedded PCB board inside, overcharge protection,
Over-discharge protection, cell balance, and temperature adjustment implemented in the battery itself

●Outstanding cranking power
●Excellent life cycle
●Cranking amperage that is not affected by the weather
●Uses quad terminal
*Since the main use is racing, please use it in an environment/model that can withstand high current.

【Guidance】
Some MOTOBATT products include
A "spacer" is included, so please use it as necessary.

【compatibility】
■Yuasa: YTX9-BS, YT12A-BS, YTZ12S, YTZ14S
■DEKA: ETX9

[Product specifications] MBTX9U
■Size (mm): L:151 W:87 H:105
■Spacer (mm): Bottom 5mm
■Voltage (V): 12V
■Cold cranking ampere (CCA): 160A
■Capacity (10HR): 10.5Ah

●Patent: Quad flex terminal
Innovative terminal arrangement allows for flexibility in connecting aftermarket accessories.

●Innovative power balance
Batteries in the powersports market continue to face three problems.
1.Big vibration
2. High load at start-up
3.Load due to additional accessories
MOTOBATT's innovative power balance design overcomes these problems.
By reviewing the conventional cranking power (CCA) and emphasizing ampere hour (Ah),
Quick power recovery allows you to cope with repeated startups with extra power.

●AGM (absorbed glass mat) design
Classified as a dry type battery designed by AGM, it has a long life and there is no need to worry about leakage, so it can be used in harsh environments.
The plates inside the battery are encased in a glass mat soaked with electrolyte, so the contact surface is always maximized and protected from vibrations.
The self-discharge rate is much lower than that of the wet type, and deeper discharge is also possible.
Even if the battery runs out, charging will restore it without reducing performance.
80% of initial battery failures are due to incorrect injection of electrolyte.
MOTOBATT is optimally adjusted at the factory and can be installed right out of the box.

【Guidance】
Some MOTOBATT products include
A "spacer" is included, so please use it as necessary.

[Compatibility] Yuasa: YTX7L-BS, YTZ8V

[Product specifications] MBTX7U
■Size (mm): L:114 W:70 H:128
■Voltage (V): 12V
■Cold cranking ampere (CCA): 115A
■Capacity (10HR): 8Ah

●Patent: Quad flex terminal
Innovative terminal arrangement allows for flexibility in connecting aftermarket accessories.

●Innovative power balance
Batteries in the powersports market continue to face three problems.
1.Big vibration
2. High load at start-up
3.Load due to additional accessories
MOTOBATT's innovative power balance design overcomes these problems.
By reviewing the conventional cranking power (CCA) and emphasizing ampere hour (Ah),
Quick power recovery allows you to cope with repeated startups with extra power.

●AGM (absorbed glass mat) design
Classified as a dry type battery designed by AGM, it has a long life and there is no need to worry about leakage, so it can be used in harsh environments.
The plates inside the battery are encased in a glass mat soaked with electrolyte, so the contact surface is always maximized and protected from vibrations.
The self-discharge rate is much lower than that of the wet type, and deeper discharge is also possible.
Even if the battery runs out, charging will restore it without reducing performance.
80% of initial battery failures are due to incorrect injection of electrolyte.
MOTOBATT is optimally adjusted at the factory and can be installed right out of the box.

★Compatible car models
This is for reference only and does not guarantee compatibility. Please check the installed battery carefully before purchasing. Others are compatible.
■Honda (car name/model)
Gyro canopy / TA02
Cabiner 50 stand UP / AF33
Spacey 125 / BC-JF04
Cabina 90 / HF06
Broad 90 / HF06
CBX125F Custom / JC-11,12
NX125/JD09
XLR125/JD16
Jade(/S) / MC23
Nighthawk / MC26
Rebel CA250 / MC13
Hornet / MC31
XL Degree / MC31
Zerbis / MC25
AX-1/MD21
CBR250RR/MC22
CBR250R/MC19
GB250 Clubman / MC10
SPADA VT250/MC20
VTR250/MC33
V-twin Magna / MC29
V25 Magna S/MC29
REBEL / MC13
CBR400RR /NC29
HORNET(CB600)

■YAMAHA (Vehicle name/model)
Sero XT225/3RW
Sero XT225W / 3RW5,4JG1,4JG2
Serrow 225S/2RW3

■KAWASAKI (car name/model)
BALIUS / ZR250A
D-Tracker / KLX250-J
D-Tracker / LX250E
GPZ250R/EX250F
KLE250 Aned / KLE250-A/A1A
KLE250ES / KLE250ES
KLX250ES/LX250G,F
KLX250/LX250E
KR250(S) / KR250A<> Super Sherper / KL250G,H
ZZ-R250/EX250H5
Balios II/ZR250B

■SUZUKI (car name/model)
Glass Tracker / NJ48A
Jebel 250 / SJ44A
Intruder LC250 / VJ51A
Marauder 250/NJ48A
ST250Etype/NJ4AA
ST250/NJ4AA
DR250S SHEM,SHEN / SJ44A
Jebel 200/SH42A
WOLF200/NH11A
RG200 Gamma / NH11A
DF200E/SH42A
Bang Bang 200 / BA-NH41A
DJEBEL200 (Jovel) / SH42A
Marauder 125 / NF48A
Jebel 125 / SF44A

【compatibility】
■Yuasa:
YB12BB2, YTX12BS, YTX12, YTX14BS, YTX14, YTX14L, YTX14H, YTX14HBS,
YTX14LBS, KMX14BS, YTX15, YTX15L, YTX15LBS
■DEKA: ETX12
■ODYSSEY: PC545

[Product specifications] MBTX12U
■Size (mm): L:151 W:87 H:130
■Spacer (mm): Bottom 5mm+10mm
■Voltage (V): 12V
■Cold cranking ampere (CCA): 200A
■Capacity (10HR): 14Ah

●Patent: Quad flex terminal
Innovative terminal arrangement allows for flexibility in connecting aftermarket accessories.

●Innovative power balance
Batteries in the powersports market continue to face three problems.
1.Big vibration
2. High load at start-up
3.Load due to additional accessories
MOTOBATT's innovative power balance design overcomes these problems.
By reviewing the conventional cranking power (CCA) and emphasizing ampere hour (Ah),
Quick power recovery allows you to cope with repeated startups with extra power.

●AGM (absorbed glass mat) design
Classified as a dry type battery designed by AGM, it has a long life and there is no need to worry about leakage, so it can be used in harsh environments.
The plates inside the battery are encased in a glass mat soaked with electrolyte, so the contact surface is always maximized and protected from vibrations.
The self-discharge rate is much lower than that of the wet type, and deeper discharge is also possible.
Even if the battery runs out, charging will restore it without reducing performance.
80% of initial battery failures are due to incorrect injection of electrolyte.
MOTOBATT is optimally adjusted at the factory and can be installed right out of the box.

【Guidance】
Some MOTOBATT products include
A "spacer" is included, so please use it as necessary.

■Compatibility: 12V battery, AGM, lead acid battery, gel battery
■IN: Automatic switching 120-240VAC - 50/60 Hz
■OUT: 12VDC 1.0A
■MAX CHARGE: 1.0A
■MAX VOLT: 14.8V
■Cap: Charging: 2-33Ah, Maintenance: ~80Ah

・Highly waterproof charger with IP68 rating
・9-step algorithm charging technology
・Overcharge protection
・Reverse polarity protection
・Spark prevention
・Maintain full charge

■Compatibility: 12V battery, lithium ion, AGM, lead acid battery, gel battery
■IN: Automatic switching 120-240VAC - 50/60 Hz
■OUT: 12VDC 2.0A
■MAX CHARGE: 2.0A
■MAX VOLT: 14.9V
■Cap: Charging: 2-100Ah, Maintenance: All sizes

・9-step algorithm charging technology
・Overcharge protection
・Reverse polarity protection
・Spark prevention
・Maintain full charge

NGK spark plug LR4C-E for HONDA BF2DH outboard motor

[LR4C-E compatible model]
BF2DH(2016～)

NGK spark plug LMAR6C-9 for HONDA BF60A, BFP60A outboard motor

[LMAR6C-9 compatible model]
BF60A, BFP60A

●Sold in units of one. Please purchase as many as you need.

*The image is an image photograph.

NGK spark plug for outboard motors

[LKR6E compatible model]
DF200A/200AP

●Sold in units of one. Please purchase as many as you need.

*The image is an image photograph.