Collection: Keel roller/exterior

Eliminates the inconvenience of moving a trailer, such as not having a place to hold it, or being in a low position and not being able to apply force even with a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

■Material: Steel
■Includes: Chain & electrode connector holder included
[Place of use] Attached to the triangular gathering part or coupler part, mainly used for 2-boat loading.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately). (Product number: 0719-02, 0719-03, 0719-04)

■Material: Stainless steel ■Attachments: Chain & electrode connector holder included [Usage location] Attached to the triangular gathering part or coupler part, mainly used for 2-boat installations.

Eliminates the inconvenience of moving a trailer, such as not having a place to hold it, or being in a low position and not being able to apply force even with a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately).
(Product number: 0719-02, 0719-03, 0719-04)

This is a [hard type] grip exclusively for the company's carry handles (product numbers: 0719-00, 0719-01).
●1 set of 2 pieces

[Conventional types have the following part numbers]
0719-02 Black
0719-03 Red
0719-04 Green

For 2 inch coupler, total length 2m

This is an extension coupler for when you cannot go to the water's edge. *You cannot drive with the coupler extend installed. *For Max trailer only.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

You can easily load and unload the important parts of the trailer, such as the axles and electrical components, without submerging them in water. The newly designed mount part for Lopros uses resin parts to improve operability when sliding, and is lightweight and compact, allowing for a wide variety of customization combinations.

After the rear ladder is stored, the rear part is secured with a pin for safety.

■Common for light and Lopros ■Made of steel ■Designed exclusively for Max trailers

【please note】
■Cannot be installed on 2-boat and regular cars.
■Adjustment may be required for wood rail specifications.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products. ・Cash on delivery is not possible as it is shipped directly from the manufacturer. ・Shipping fee is for each item.

●A mounting plate required when installing a retractable transom tie-down on a MAX trailer.

*Two stainless steel mounting plates (product number: 0706-25) are required for each trailer.

■Material: Plate and U bolt both made of stainless steel

●A convenient ratchet type tie-down belt that does not require cleaning up the belt.
●Transom tie-down made entirely of stainless steel, resistant to corrosion, and retractable with one push.
●Compact size allows you to securely fix PWC.
●The hook part is made of stainless steel coated with resin.

■Material (hook part): Stainless steel (resin coating)
■Tightening force: 300kg
■Breaking load: 600kg
■Belt length: 1m

*Mounting plate is not included.
*Stainless steel mounting plate is required for installation (sold separately part number: 0706-25)

●Material: Steel
●Belt length: 1,455mm
●Width: 25mm
●Working load: 400kg
●Breaking load 800kg

The use of a rotating mechanism allows for free installation.
Since it is fixed to the transom, it can be towed in style without damaging the hull.
Also, since the gear part is exposed, it is easy to maintain and can be used for a long time with proper grease.

●For fixing in places with no tightening allowance or in narrow places.
●Since there is no hook, lashing around the perimeter is very convenient.

●Width 25mm x length 1,455mm

■Material: Stainless steel
■Size: Height 140 x Width 524 x Depth 295mm

It is convenient for storing small items such as tool boxes and anchors as it is easy to take in and out with the PWC loaded.
It can also be used in combination with the front box and can be used as additional storage (mounting positions are limited)

【please note】
*Please do not load gasoline cans.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・When purchasing multiple items, the shipping fee will be calculated in units of 1 item. Please note that "shipping fee x number of items".

■Material: Steel
■Size: Height 140 x Width 524 x Depth 295mm

It is convenient for storing small items such as tool boxes and anchors as it is easy to take in and out with the PWC loaded.
It can also be used in combination with the front box and can be used as additional storage (mounting positions are limited)

【please note】
*Please do not load gasoline cans.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・When purchasing multiple items, the shipping fee will be calculated in units of 1 item. Please note that "shipping fee x number of items"

●Loading the beach stand on a trailer reduces dirt and scratches inside the vehicle.

●It is also possible to install the separately sold side storage box (product number: 0704-21, 0704-22) [see image below].

<set content>
Main body, U bolts (4 50x50mm, 2 75x50mm), transom tie down, universal hook

■Size: Height 760 x Width 360 x Depth 315mm

■Material: Stainless steel
■Sales unit: 1 piece

[For small cars with wire brake only]

●Size A:490 B:750 C:985 D:50-150 (mm)
●Convenient for storing small items, wet suits, and other items that are difficult to store inside the vehicle.

[Product information]
●As this is an overseas manufactured product, the color and texture may differ depending on the time of arrival and the individual product.
Small scratches occur during the manufacturing process and are not eligible for complaints.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping charges are for each item.

●Size A:490 B:750 C:980 D:150(mm)
●Convenient for storing items you don't want to bring into the car.

[Product information]
●As this is an overseas manufactured product, the color and texture may differ depending on the time of arrival and the individual product.
Small scratches occur during the manufacturing process and are not covered by complaints.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

●Size A:490 B:680 C:830 D:125 (mm)
●Convenient for storing small items, wet suits, and other items that are difficult to store inside the vehicle.

[Product information]
●As this is an overseas manufactured product, the color and texture may differ depending on the time of arrival and the individual product.
Small scratches occur during the manufacturing process and are not eligible for complaints.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping charges are for each item.

●Size A:490 B:680 C:830 D:125 (mm)
●Convenient for storing small items, wet suits, and other items that are difficult to store inside the vehicle.

[Product information]
●As this is an overseas manufactured product, the color and texture may differ depending on the time of arrival and the individual product.
Please note that small scratches occur during the manufacturing process and are not eligible for complaints.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

●Size A:740 B:790 C:1290 D:160(mm)
●Convenient for storing small items, wet suits, and other items that are difficult to store inside the vehicle.

[Product information]
●As this is an overseas manufactured product, the color and texture may differ depending on the time of arrival and the individual product.
Please note that small scratches occur during the manufacturing process and are not eligible for complaints.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

Tire & base only

■For TIGHTJAPAN stopper jack (0702-)
■Material: Stainless steel
■Wheel diameter: 150mm, stroke amount: 280mm

Tire & base only *The base part has been changed to black.

■For TIGHTJAPAN stopper jack (0702-00, 0702-06)
■Material: Steel
■Wheel diameter: 150mm, stroke amount: 280mm

Because it is a large item, shipping charges will be charged separately.

TIGHT JAPAN MAX Trailer fender kit that allows you to change the fender for trailers to a fender with steps by bolt-on
*Please enter the trailer model in the notes section to confirm compatibility.

■Sales unit: 1 set (left and right set)

【important point】
・Cannot be bundled with other products ・Cash on delivery is not possible as this item is shipped directly from the manufacturer

ADEL It is designed exclusively for ADEL trailers, so it cannot be installed on other vehicle models.

■Sales unit: 1 piece (2 pieces required when replacing left and right)

0503-60 Galfender 1 wheel *Stays, bolts, etc. are not included.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

●Width 265mm.
●Material: ABS
■Sales unit: 1 piece (2 pieces required when replacing left and right)

0503-06 Air fender 1 wheel

■Size: 78x170mm (length x width)

■Size: 75x80mm (length x width)

A convenient bracket that can neatly fix 50 square pipes.

■Inside: approx. 55mm
■Mounting hole pitch: Approx. 63mm (center to center)

This is an auxiliary part that offers a wide variety of variations in adjusting and changing the tower position.

■Size: Total length 1,690mm, slant height difference 50m

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.
Due to the large size of the item, shipping charges will be incurred.

●A bracket for adjusting the bank angle on flat rails.
●Material: Stainless steel
*1 set (for 1 boat: 4 locations) Mounting bolts included

●A bracket for adjusting the bank angle on flat rails.
●Material: Steel
*1 set (for 1 boat: 4 locations) Mounting bolts included

Due to the large size of the item, the following "area shipping fee" will be charged separately.

[Product specifications]
■For small cars only ■Sales unit: 1 piece ■Total length: 2000mm
■Accessories: Mounting bolts

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping charges are for each item.

[Product specifications]
■Sold in units of one.
■Total length: 2000mm
■Mounting hole pitch: 1500mm
■Accessories: Mounting bolts

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping charges are for each item.

Due to the large size of the item, shipping charges will be incurred.

[Product specifications]

■Sold in units of one.
■Total length: 1830mm
■Mounting hole pitch: 1290mm
■Accessories: Mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products. ・Cash on delivery is not possible as it is shipped directly from the manufacturer. ・Shipping charges are for each item.
*Due to large items, shipping charges will be incurred.

[Product Specifications]

■Sold in units of one bottle.
■ Total length: 2000mm
■ Mounting hole pitch: 1500mm
■Accessories: Mounting bolts

[Disclaimer]
The color of the color rail may change depending on the arrival time.

[Shipping Information]
・Due to the shape of the product, it cannot be bundled with other products. ・As this is a product shipped directly from the manufacturer, cash on delivery is not available.

[Product specifications]

■Sold in units of one.
■Total length: 1830mm
■Mounting hole pitch: 1290mm
■Accessories: Mounting bolts

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Up to 2 items can be shipped at once.

A bank pad is attached to the wood rail.

■Sold in units of one.
■Total length: 2000mm
■Mounting hole pitch: 1430mm
■Two bank mounting angles included

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

■Made of stainless steel ■Compatibility: For light vehicles

[Information regarding delivery]
・Shipping fee will be charged for each set of 2 pieces.
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.
Due to the large size of the item, shipping charges will be incurred.

■1 set of 2 pieces
■Made of steel
■Compatibility: For light vehicles

[Information regarding delivery]
・Shipping fee will be charged for each set of 2 pieces.
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.
Due to the large size of the item, shipping charges will be incurred.

■Material: Stainless steel
■Winch specifications: single gear
■Load capacity: 540kg
*Strap is sold separately.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

●Color: Black

●Width: 50mm Belt length: 5,000mm

●By adding a multi-strap function to the hook part, it reduces damage to the hull and can be easily fixed to PWCs where hooks are difficult to pass through, improving functionality.

[The photo shows stainless steel]

■Material tower: Stainless steel
Winch: steel
■Winch specifications: single gear
■Load capacity: 540kg
*Strap is sold separately.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

Minus bar

Size: 50 x 50 x 1300 (mm)

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

The height and front and rear positions of the rollers can be adjusted to suit the hull.
Compatible with single boats of each manufacturer.
It is designed to be fixed by co-tightening with the rail and to have the optimal rail width for single boats.

■Size: 80x25mm (diameter x thickness)
■Set of 2

It is designed to allow the position of the bow roller to be adjusted up and down to match the hull position of the PWC.

■Tower: Stainless steel
■Winch: Single gear 540kg steel winch
■Accessories: Loop strap, set of mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

It is designed to allow the position of the bow roller to be adjusted up and down to match the hull position of the PWC.

■Tower: Steel
■Winch: Single gear 540kg steel winch
■Accessories: Loop strap, set of mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

★The strap has been changed to a loop. ★

■Material Tower: Stainless steel Winch: Steel
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts

*If you are looking for stainless steel mounting bolts, please use [Product number: 0908-01 (sold separately)].

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

★The strap has been changed to a loop. ★

■Material tower: Stainless steel
Winch: steel
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

★The Viper paint has been changed to a black paint, and the strap has been changed to a loop. ★

■Material Tower, winch: Made of steel★Black painted
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

■Length: 1,170mm (excluding hook)
■Hook: 110mm

●This is a connector holder made by Tight Japan.
●Holder with optimal angle for quick storage of connectors
A convenient holder with a hook for hanging a safety wire.

■Material: Stainless steel