Collection: Keel roller/exterior

■Size: 75x80mm (length x width)

Bow stop extension kit compatible with SOREX ZERO series.

If you feel that the center of gravity of the trailer and hull is too forward on Kawasaki's ULTRA series or STX series,
This kit allows you to lower the center of gravity of the boat to the rear.

■Compatibility: SOREX ZERO trailer ■Contents: Main unit, mounting parts (please refer to the image for details)
*This product does not include winch, strap, bow roller, etc.

■1 point
■Please choose the size you need from 4 different heights.
ST-026-05: 190mm
ST-026-01: 230mm
ST-026-07: 245mm
ST-026-03: 270mm

[Ordered products]

The wiring socket can be installed at any position on the towed vehicle.

Made by SOREX

[Material] Stainless steel

●Protects the license plate from contact not only when washing the boat but also while driving.
*This is a product to prevent (alert) damage to license plates.
*Do not wash or perform maintenance on the boat with a load applied to the number guard.
(When using with a load, please use a rear jack.)

■Made of stainless steel ■Compatibility: For light vehicles

[Information regarding delivery]
・Shipping fee will be charged for each set of 2 pieces.
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.
Due to the large size of the item, shipping charges will be incurred.

●Ensures stability when parking.

SRX-117-0/1 for NF-1/NF-E
SRX-117-0/2 For boat trailers *Please let us know the trailer model and mounting location when ordering.

■Sales unit: 1 piece

■Compatibility: SW, 1150 series
■Please be sure to indicate the trailer model when ordering.
*If you are considering using this product on a model other than those listed above, please refer to the image that shows the size of the mounting part.
*In this case, we cannot confirm compatibility even if the model is presented at the time of ordering.
*Also, if you wish to arrange the product after confirming the image, please write in the notes section when ordering, ``I have confirmed the image, but would like to arrange the product without confirming the model.''

■Size: Total length 235mm x Φ80mm
Shaft diameter: 16.0mm

ST-089-42 Chain brake (U bolt size 42×100mm)
ST-089-47 Chain brake (U bolt size 47×100mm)
ST-089-52 Chain brake (U bolt size 52 x 100mm)

[Ordered products]

■Wooden bank ■Total length: 1,850mm

●Ensures stability when parking.

SRX-117-0/1 for NF-1/NF-E
SRX-117-0/2 For boat trailers *Please let us know the trailer model and mounting location when ordering.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

●Sold in units of 1 piece.
●A hook that can be attached to any position on the side frame.

Please select the U bolt size when ordering.
[1] 42×100mm
[2] 47×100mm
[3] 52×100mm

A multi-purpose hook that can be attached to the frame and mount of Max trailers.
■Material: Stainless steel (*Mounting bolts are steel)

[1]0714-02: 50×50mm
[2] 0714-03: 75×45mm

[Change from Viper color to black]

A multi-purpose hook that can be attached to the frame and mount of Max trailers.
■Material: Steel with bolts

[1]0714-00: 50×50mm
[2] 0714-01: 75×45mm

[1] L type: A■60 / B■95 / C■50 / D■35 (mm)
[2] L-shaped long: A■60 / B■95 / C■50 / D■90 (mm)
[3] Straight: A■115/B■95/C■50/D■0 (mm)

Plate thickness: 2.0 mm
Plate only (screws etc. not included)

[1] and [2] are L-type
[3] is a straight type (straight without bending).

56017/Total length A: 136.0mm Shaft diameter B: 12.5mm Recommended roller width: 99.0mm
56018/Total length A: 159.0mm Shaft diameter B: 12.5mm Recommended roller width: 127.0mm

This is a made-to-order product.

[Request when ordering]------------------------------------------ -------
The following items are required for product ordering:
When placing your order, please enter the following information in the Requests/Comments section:
Trailer model name
● Trailer year
●Stamp number (trailer) The number stamped on the front.
Example: In the case of SOREX, it is written as [Oka] ~ [Oka] ←
---------------------- ---------------------------- -------------------

[Ordered products]

■Adaptation: For wooden banks
■Size: 60×45×45

■Sales unit: 1 piece

■Compatibility: SW, 1150 series
■Please be sure to indicate the trailer model when ordering.
*If you are considering using this product on a model other than those listed above, please refer to the image that shows the size of the mounting part.
*In this case, we cannot confirm compatibility even if the model is presented at the time of ordering.
*Also, if you wish to arrange the product after confirming the image, please write in the notes section when ordering, ``I have confirmed the image, but would like to arrange the product without confirming the model.''

A cargo frame that can be easily DIYed into a country-style cargo trailer.

*Drilling into the loading platform is required for installation.

"set content"
Only 4 pillars
*Wood (1x4) and mounting bolts are not included. You can purchase it at home centers, etc.

■MAX TRAILER triangle reflector

■Size: 160mm on one side (with bolts)

■Upper and lower mounting holes

■Quantity: 1 piece

[Ordered products]

■Roller width: 220mm
■Bracket dimensions: 195x120x168mm (width x height x depth)
■Material: Steel

This is a [hard type] grip exclusively for the company's carry handles (product numbers: 0719-00, 0719-01).
●1 set of 2 pieces

[Conventional types have the following part numbers]
0719-02 Black
0719-03 Red
0719-04 Green

For 2 inch coupler, total length 2m

This is an extension coupler for when you cannot go to the water's edge. *You cannot drive with the coupler extend installed. *For Max trailer only.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

●A convenient ratchet type tie-down belt that does not require cleaning up the belt.
●Transom tie-down made entirely of stainless steel, resistant to corrosion, and retractable with one push.
●Compact size allows you to securely fix PWC.
●The hook part is made of stainless steel coated with resin.

■Material (hook part): Stainless steel (resin coating)
■Tightening force: 300kg
■Breaking load: 600kg
■Belt length: 1m

*Mounting plate is not included.
*Stainless steel mounting plate is required for installation (sold separately part number: 0706-25)

■Material: Stainless steel
■Sales unit: 1 piece

Tire & base only *The base part has been changed to black.

■For TIGHTJAPAN stopper jack (0702-00, 0702-06)
■Material: Steel
■Wheel diameter: 150mm, stroke amount: 280mm

■Size: 78x170mm (length x width)

A convenient bracket that can neatly fix 50 square pipes.

■Inside: approx. 55mm
■Mounting hole pitch: Approx. 63mm (center to center)

This is an auxiliary part that offers a wide variety of variations in adjusting and changing the tower position.

■Size: Total length 1,690mm, slant height difference 50m

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.
Due to the large size of the item, shipping charges will be incurred.

■1 set of 2 pieces
■Made of steel
■Compatibility: For light vehicles

[Information regarding delivery]
・Shipping fee will be charged for each set of 2 pieces.
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.
Due to the large size of the item, shipping charges will be incurred.

Minus bar

Size: 50 x 50 x 1300 (mm)

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping fee is for 1 piece.

■Size: 80x25mm (diameter x thickness)
■Set of 2

It is designed to allow the position of the bow roller to be adjusted up and down to match the hull position of the PWC.

■Tower: Stainless steel
■Winch: Single gear 540kg steel winch
■Accessories: Loop strap, set of mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

It is designed to allow the position of the bow roller to be adjusted up and down to match the hull position of the PWC.

■Tower: Steel
■Winch: Single gear 540kg steel winch
■Accessories: Loop strap, set of mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

★The strap has been changed to a loop. ★

■Material Tower: Stainless steel Winch: Steel
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts

*If you are looking for stainless steel mounting bolts, please use [Product number: 0908-01 (sold separately)].

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

★The strap has been changed to a loop. ★

■Material tower: Stainless steel
Winch: steel
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

★The Viper paint has been changed to a black paint, and the strap has been changed to a loop. ★

■Material Tower, winch: Made of steel★Black painted
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

●A22mm B34mm C89mm D44mm E17mm
●Small roller attached to the end of the bow keel
●Made of hard rubber

■Size: Total length 180mm x 80mm
■Shaft diameter: Ф16.0mm

■Size: Total length 285mm x Ф80mm
■Shaft diameter: 16.0mm

This is a ``cushion pad'' that is placed on the platform of a trailer to improve the slippage of the boat.
It is a material that is resistant to corrosion and water, and does not wear out easily even when loaded with heavy ships.

【size】
Width: 20cm
Total length: 365cm

[Installation method]
Paste it with rubber adhesive and secure it firmly with a tacker (a large version of a stapler).

[Product size]
■Total length (A): 337.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 295.0mm
*Accessories: End cap