Collection: Parts for Kawasaki

[Compatible models]
KAWASAKI STX160LX

Amplifier stay required when replacing the handlebar mount of STX160LX.
The JETSOUND audio system installed on the STX160LX can be fixed without impairing the operability of the audio amplifier when replacing the steering mount.
This is a stainless steel stay that is compatible with each of the company's steering wheel mounts.

[Compatible mount]
■Product number UL35300 Shockless mount system
■Product number UL35003-ULD ULTRA low down mount kit

For Kawasaki 800X-2 boats equipped with transform hoods

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35003-160] A type that combines a 160mm mount post.

For boats equipped with KAWASAKI 800X-2 lance foam hood

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35300] Type combined with shockless mount.

For Kawasaki 800X-2 boats equipped with transform hoods

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35003-DAJS] Type combined with direct adjustable mount.

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts plate only.
You can adjust the mount to your liking by combining the post, base, etc.

【please note】
This product only includes the plate and bolts are not included.

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts base only.
You can adjust the mount to your liking by combining the post, head, etc.

【please note】
This product only includes the base and bolts are not included.

[Applicable models] KAWASAKI ULTRA series
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310LX/310LX-S

Clamp standard bar (22.4mm diameter) standard equipment

A dedicated set that allows UNLIMITED handle mount (UL35003) to be used with the ULTRA series!

A 160mm optional mount post is installed to lower it to the limit.
This makes it easier to shift the front load to the riding position when cornering, providing a sense of stability in steering.

[Kit contents]
●UL35003 handle mount kit
(Mount, standard bark clamp, cap bolt M8 x 30 x 30 mm),
●UL35003-160 optional mount post 160mm

[Applicable models] KAWASAKI STX160/ULTRA series
STX160LX/160X
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310

A handle mount with a 230mm post.
Due to its height, you can ride with an upright posture, and by raising your line of sight, you can ride with a sense of security and stability.

[Kit contents]
UL35003: Handlebar mount base/handlebar clamp (mounting bolt M8-30 x 4),
*Clamp standard bar (22.2mm diameter) standard equipment
UL35003-230: Optional mounting post 230mm

[Compatible models] KAWASAKI Kawasaki
STX series (750/900/1100/1100DI/STX-R/12F/15F/15S),
900STS
800X-2
■Compatible with standard bar (22.4mm, 7/8")

*Compatibility can be expanded by using optional items.
Can be used with the ULTRA series when used with "UL35003-160 Mount Post 160mm".

The definitive lowdown handle mount!
Succeeded in lowering 100mm from the stock mount.
You can freely adjust the height and bar of your choice!
Systemized based on position 80mm post.
The handle height can be adjusted by changing the optional post, and is compatible with many Kawasaki models.
18 positions can be selected by making the post base and clamp base individually compatible.

[Kit contents]
mount head, mount base
Standard bar (for bar diameter: 22.4mm) clamp
Cap bolt M8×30×30mm
Mount post 80mm

*Second photo... Comparison photo with the genuine one with the mount replaced
*Third photo...Installation image

[Compatible models]
KAWASAKI STX160LX/STX160

This cover protects the back side of the throttle lever when replacing the steering wheel of the STX160 series.

■Material: Stainless steel

[Applicable models] ULTRA310/300 series

●By installing it on the muffler body, it becomes possible to install sensors such as [Product number: AT-200] auto tune.

●Mounting hole: M18xP1.5mm

[Kit contents] Flange body, blind plug, mounting bolts
*Please use genuine gasket.
*Remove the muffler filter before use.

*About 3 weeks after ordering as it is made to order.

[Applicable models] KAWASAKI ULTRA300/310 series

●Remove and use the muffler filter inside the normal muffler.
● Filter maintenance can be omitted by removing the filter.

[Compatible models]
■Kawasaki: 750SX / SXi / SXi-Pro / 800X-2 / SX-R series (800SX-R / 1500SX-R)
■YAMAHA: 700FX / 700SJ

[About processing]
[1] When installing on a YAMAHA boat...If using a genuine YAMAHA lock: Machining of the lock part is required. A genuine KAWASAKI lock was purchased separately, and a genuine part lock assembly [27016-3703] was prepared and assembled.
[2] Use on KAWASAKI boats: Disassemble the genuine lock and assemble it to the product.

[Material] Stainless steel buffed finish

Excellent strength! Will not rust!
Replacing the original one will give the hull a luxurious feel and accent, making it more stylish.
The long hook design helps to securely lock the hood and prevent it from coming off.
The hook part can also be used with YAMAHA locks (processing required for installation)

[Note] Only the latch, internal parts of the lock part are not included.

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable models] KAWASAKI STX160LX / STX160X / STX15F / STX12F

●Billet sponsons

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE3 fishtail

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE2 fishtail

[Made-to-order products] It may take approximately one month from the time of order.

*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Applicable model] KAWASAKI SX-R 1500 4 stroke

●Billet sponson TYPE2

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●NEW-WIDE (The base is 8mm wider than before, improving running stability!)

●The angle of the side fins can be adjusted steplessly from 0 degrees to -12 degrees with respect to the bottom edge of the sponson plate.

●The protruding amount of the side fins is 25mm from the sponson plate surface.
The rear end of the side fin attachment type sponson plate is cut and the amount of protrusion is reduced.

●Similar to the previous model, the sponson plate can be installed in four positions: up to 24mm in the front and back, and up to 11mm in the top and bottom.

●The flap at the rear end of the base plate can also be adjusted steplessly in the range of 0 degrees to -14 degrees, just like the previous model.
The guideline is engraved, so you can easily adjust the left and right angles.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

●Exhaust nozzle for SE ULTRA310/300/260/250.

●This is a part to make the exhaust port look stylish.

●Exhaust nozzle for SE ULTRA310/300/260/250.

●This is a part to make the exhaust port look stylish.

[Compatible models]
KAWASAKI Kawasaki SX-R1500

●Exquisite length and unique shape for straight line stability, top speed, cornering, etc.
Demonstrates mature performance in all aspects.

KAWASAKI SX-R 1500 4 stroke

NEW Venturi Gate for SX-R 1500

KAWASAKI ULTRA310LX / 310R / 310X SE / 310X / 300X / 300LX

●Designed to improve water absorption efficiency across the entire speed range while minimizing the impact on top speed, making it suitable for a wide range of uses, from leisure use to racing.

KAWASAKI Kawasaki 15F/ 15S / 12F/ STX-R

●This is an innovative gate that attaches wings to the intake port and attaches the pump to even higher pressure.

[Compatible models] KAWASAKI ULTRA series (250 / 260 / 300 / 310)

ULTRA250X
ULTRA260X/ULTRA260LX
ULTRA300X/ULTRA300LX
ULTRA310X / ULTRA310LX / ULTRA310X-SE / ULTRA310R

[Compatible models] KAWASAKI ULTRA series (250 / 260)
ULTRA250X
ULTRA260X/ULTRA260LX
Genuine post exchangeable handle mount compatible with Kawasaki ULTRA250/260.
I remade it by tapering it from the bottom to the center. Easy to install, just replace the normal post.
Not only is it easier to operate, but it also makes the area around the handle look cool.

SE-027013 (Suitable for handlebars of common thickness)
SE-027013F (suitable for thick fat bars)
SE-027013BK (Suitable for handlebars of common thickness)
SE-027013BK-F (Suitable for thick fat bars)

[Applicable model] KAWASAKI 1500SX-R 4 stroke

●The design has a track record of racing,
Provides significant handling improvement over stock 1500SXR sponsons.

●The backing plate is precision machined from high-strength billet aluminum.
Anodized to prevent corrosion.

●Features a bulletproof fin mounting system that includes 3 anchor points with billet inserts.
● Sponson depth and anterior/posterior position are adjustable.
●Easy installation requires no drilling.

●Applicable models KAWASAKI
ULTRA310X/310LX/310R/310SE
ULTRA300X/300LX
ULTRA260X/260LX
ULTRA250X
ULTRA LX
PRO series sponsons.
Achieves agile cornering.
The stability of the corner grip is also outstanding.

[Compatibility] KAWASAKI ULTRA310 series

*"RK15-238-325" is required when installing on RIVA's water box.

- By removing the genuine resonator, the exhaust becomes smoother,
This leads to improved acceleration and top speed.

●You can also enjoy changes in sound quality.

[Compatible models] KAWASAKI ULTRA250/LX/15F

exhaust port only

●Aluminum taper processing is applied.
●The tail side becomes stylish.

■Size: Hull IN side 60φ

[Compatibility] KAWASAKI Kawasaki
ULTRA300/260/250(2008)

*ULTRA300(2011-), ULTRA250/260(2008-2010)
When using the above genuine water box,
Please use "Product number: RK16090-08-ERC conversion coupler" together.

●Improve exhaust efficiency and reduce back pressure.

●Large diameter exhaust outlet is included in ULTRA from 08 onwards.

[Compatible models]
KAWASAKI Kawasaki NEW SX-R

●Provides a steady supply of cool air to the engine, significantly improving acceleration and RPM.

• This system draws cool air from the front of the engine compartment near the hull vents.

●Replaces restrictive stock airbox with a high volume precision molded intake tract.

●Cooling air enters the system through an oversized K&N filter element.

[Compatible models] KAWASAKI ULTRA 310/300

The extra-large filter and large-diameter 4-inch pipe are unaffected by the heat in the engine compartment.
Air is sent to the supercharger to improve both acceleration and top speed.
Comes with a water-repellent pre-filter.

■Filter installation diameter: 4 inches (approx. 100mm)

[Compatible models]
KAWASAKI Kawasaki
ULTRA 260/250

By increasing the amount of air intake and sending a large amount of air into the engine,
Low and medium speed acceleration is improved, and top speed is also increased.

[Compatible models]
KAWASAKI STX-15F/15S/12F

●By increasing the amount of air intake and sending a large amount of air into the engine,
Low and medium speed acceleration is improved and top speed is also increased.

● Directly mounted on the throttle body to increase intake efficiency.

■With water repellent pre-filter
■Included: Small filter for blizzer x 2

●Series: CONCORD
●Pitch size: 16/24
●3 blades
●Applicable pump diameter: 155mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models]
KAWASAKI ULTRA 260X/260LX/250X

KX-CD-1624 Limited engine recommended/Modified engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 16/21
●3 blades
●Applicable pump diameter: 155mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models]
KAWASAKI ULTRA 260X/260LX/250X

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 15/23
●3 blades
●Applicable pump diameter: 155mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models]
KAWASAKI ULTRA 260X/260LX/250X

KX-CD-1523 Stock engine recommended (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 10/16
●3 blades
●Applicable pump diameter: 155mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009)

[Compatible models]
KAWASAKI ULTRA LX stock engine, limited engine recommended

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Applicable models] KAWASAKI ULTRA series
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310X / 310LX / ULTRA310SE / ULTRA310R
ULTRA LX

[Please note] This product is not completely waterproof.
[Material] 20% nylon, 80% polyester
All seams are double stitched for durability and lined with a soft finish to protect the hull.
The fuel filler port can be opened and closed, allowing you to refuel with the cover on.
The hem of the cover uses an approximately 3.8cm nylon belt, durable buckle, and elastic shock cord to securely secure it to the hull.
Deep coverage protects the hull from stone debris.

[Disclaimer]
As this is an overseas product, the color and logo may change without notice depending on the time of arrival.
Also, please check the images for the packaging etc.

●Series: CONCORD
●Pitch size: 15/22
●3 blades
●Applicable pump diameter: 160mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009, rubber SL009)

[Compatible models]
KAWASAKI ULTRA 310X/310LX/310R/310X SE/300X/300LX

KR-CD-1522 Limited engine recommended/Modified engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 14/21
●3 blades
●Applicable pump diameter: 160mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA009, rubber SL009)

[Compatible models]
KAWASAKI ULTRA 310X/310LX/310R/310X SE/300X/300LX
KR-CD-1421 Stock engine recommended (normal boat)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.