Collection: Interior/exterior products

When installed, the top surface becomes horizontal, so this handle can also be used as a step.
Made of 316 stainless steel material, which is highly durable and resistant to corrosion.
Fix it to the transom etc. with screws etc.

[Product specifications]
■Material: Stainless steel (SUS 316)
-Size: Width 170 x Height 30 x Depth 50mm

●Using various attachments, it can be used with various antennas.

●The angle can be adjusted freely, and installation is easy as long as you have a rail such as FB or side rail.

●For 25Ф pipe

●Made of stainless steel

●Using various attachments, it can be used with various antennas.

●The angle can be adjusted freely, and installation is easy as long as you have a rail such as FB or side rail.

●For 1" x 14 screw threads

●Made of stainless steel

●The base body can be easily installed by simply clamping it onto a pipe from 19φ to 32φ.

●The antenna can be easily brought down and fixed with one-touch operation of the lever, so the antenna will not damage the boat.

●For 25Ф pipe

●Made of stainless steel

●The base body can be easily installed by simply clamping it onto a pipe from 19φ to 32φ.

●The antenna can be easily brought down and fixed with one-touch operation of the lever, so the antenna will not damage the boat.

●For 1" x 14 screw threads

●Made of stainless steel

●The antenna can be easily brought down and fixed with one-touch operation of the lever, so the antenna will not damage the boat.

●Can be installed on either flat or side surfaces.

●For 1" x 14 screw threads

●Made of stainless steel

●A very convenient fixture that allows you to easily secure the rope with one hand.

●You can easily fix the rope by simply passing the rope through it alternately without tying it.

●It can be used in a variety of ways, such as hanging fenders, mooring ships, loading platforms for pickups, and trailers.

●Once fixed, the rope will not come off even if strong tension is applied.

●When removing it, you can easily remove it by removing the ropes passed through it alternately.

●Can be used with ropes up to 12mm in diameter.

●Body dimensions: 82mmx40mm
●Made of stainless steel

[Product specifications]
■Flange dimensions: 350 x 604mm
■Drilling dimensions: 269 x 517mm
■Opening dimensions: 248 x 495mm
■Opening angle: Approximately 100 degrees

●This is a hatch that is ideal for installing on the lid of an Ikesu.
●A seal is installed between the lid and flange to prevent water from entering.

[Product specifications]
■Flange dimensions: 328 x 402mm
■Drilling dimensions: 245 x 312mm
■Opening dimensions: 216 x 290mm
■Opening angle: Approximately 100 degrees

●This is a hatch that is ideal for installing on the lid of an Ikesu.
●A seal is installed between the lid and flange to prevent water from entering.

[Product specifications]
■Flange dimensions: 280 x 381mm
■Drilling dimensions: 200×298mm
■Opening dimensions: 180×280mm
■Opening angle: Approximately 100 degrees

●This is a hatch that is ideal for installing on the lid of an Ikesu.
●A seal is installed between the lid and flange to prevent water from entering.

[Product specifications]
■Material: Nylon
■Size (when unfolded)
Height: approx. 162cm (rope tip to bottom of step)

●A simple ladder that can be secured by hooking a nylon rope onto a cleat.
●The width of the step is approximately 29cm, and the surface is engraved with a non-slip pattern.
●Can be stored compactly when not in use.

●A rope guide that is attached to the bow side.

●Made of 316 stainless steel material that is resistant to rust and corrosion, so it retains its beautiful luster for a long time.

●The guide openings are asymmetrically opened to prevent the rope from coming off the guide.

●Left and right set.

-Pedestal width 155x length 24x height 37x rope opening width 31x mounting hole distance 123mm

●A rope guide that is attached to the bow side.

●Made of 316 stainless steel material that is resistant to rust and corrosion, so it retains its beautiful luster for a long time.

●The guide openings are asymmetrically opened to the left and right to prevent the rope from coming off the guide.

●Left and right set.

-Pedestal width 123x length 20x height 26x rope opening width 14x mounting hole distance 85mm

[Product specifications]
■Material
Body: Aluminum
Roller: vinyl chloride
■Size: Width 140x Depth 69x Height 71mm

A roller that smoothes the movement of ropes and chains when raising and lowering the anchor, and also prevents damage to the hull.
It has rollers in the horizontal and vertical directions, so it can be raised and lowered stably and smoothly even if the rope swings from side to side.
Weather resistance has been strengthened by adding titanium to AC7A aluminum, which is resistant to corrosion and rust.

●It is a swivel base whose upper part rotates 360 degrees.

●Used for casting sheets, folding sheets, etc.

●Material: Stainless steel

-Mounting hole size: 12.8-14.3cm x 12.8-14.3cm

●Drilling size: 24.3φmm
-Flange size: 55 x 36.7mm
●Screw hole: φ5mm
- Distance between screws and centers: Approx. 41mm

*Main body only, mounting screws etc. are not included.

[Product specifications]
■Quantity: 2 pieces
■Material: Nylon
■Body size: L88 x W43 x H22mm
■Compatible with: Ropes up to 10mm diameter
■Mounting hole size: 5mm

This is a very convenient fixture that allows you to easily secure ropes with one hand.
You can easily fix the rope by simply passing the rope through it alternately without tying it.
It can be used in a variety of ways, such as hanging fenders, mooring ships, loading platforms for pickups, and trailers.

Once secured, the rope will not come off even if strong tension is applied.
When removing it, you can easily remove it by removing the ropes passed through it alternately.

[About the product]
This product cannot be specified as the color may vary depending on the arrival time. Please note.

It is a round camp plate with stable strength as it is firmly fixed at 4 points.
Made of rust-resistant stainless steel.

■Material: Stainless steel
■Size: Length 52 x Width 52 x Height 32 x Wire diameter 8 x Ring inner diameter 40mm

It is a round camp plate with stable strength as it is firmly fixed at 4 points.
Made of rust-resistant stainless steel.

■Material: Stainless steel
■Size: Length 42 x Width 42 x Height 25 x Wire diameter 6 x Ring inner diameter 35mm

Handrails (handrails, safety bars) that can be installed anywhere, including on boats.
Made of stainless steel (SUS304), it is rust resistant and highly durable.
The mounting flange is of the covered type, so it looks neat. The surface has a mirror finish.
To install, securely fasten in three places on each side with tapping screws, and click the covers on each side to complete.

[Product specifications]
■Material: Stainless steel (SUS 304) Mirror finish ■Accessories: Tapping screws x 6, PC plugs x 6

■This drain plug is indispensable for draining water from boats and bilges.

■By bending the lever part 90 degrees, the rubber part expands and fixes.

■Material (main body): Brass + rubber

■Adaptation: Hole diameter 31φ

■This drain plug is indispensable for draining water from boats and bilges.

■By bending the lever part 90 degrees, the rubber part expands and fixes.

■Material (main body): Brass + rubber

■Applicable: Hole diameter 25φ