Collection: Intake carburetor filter

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

■For MIKUNI ■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use. Please note.

006-9050 50
006-9052 52.5
006-9055 55
006-9057 57.5
006-9060 60
006-9062 62.5
006-9065 65
006-9067 67.5
006-9070 70
006-9072 72.5
006-9075 75
006-9077 77.5
006-9080 80
006-9085 85

This spring is
Reducing the tension improves throttle response, but it also makes it more likely to burn due to vibration, etc.
If you make it stronger, it will have the opposite effect.
As the g number increases, the tension becomes stronger.

●Sold in units of 1 piece.

Used to adjust the amount of fuel supplied within the carburetor.
The larger the size, the greater the supply.

Product number/size
006-360/1.5
006-361/2.0
006-362/2.3
006-363/2.5

●This is a gasket parts set for overhauling the carburetor.
●Please use it for regular cab overhaul.
●It is for one cylinder.

Please choose from below.

----------------------------------------------
[1] 006-346 MIKUNI for SBN 38/44/46mm
[Compatible models]
SEA-DOO: 580/650/720/800(GTI/SPX)
YAMAHA Yamaha ：650/700/760/1100/1200 Non-Power Valve(SJ/GP)
KAWASAKI Kawasaki: Sxi/SxiPro/800X2/800SX-R

[2] 006-352 I-series for MIKUNI S-BN
[Compatible models]
YAMAHA Yamaha: GPR/GP800/GP800R/XL-L/XLT (66E/66V/67X)

[3] 006-351 MIKUNI SBN Seadoo for I-series
[Compatible models]
SEA-DOO: 951

[Compatible models]
●YAMAHA FX SVHO (19-)

●Far exceeds normal suction efficiency.

●The power filter stably supplies cold air to the supercharged engine,
Provides significantly improved acceleration and rpm.

[Adaptation]
UL15012 KEIHIN Carburetor [Photo: Right]
UL15013 MIKUNI carburetor (*) [Photo: left]
(*) Cannot be used with genuine SBN40.

●The throttle becomes lighter and reduces fatigue.

Compatible with SEADOO 1503, 1630cc 2009-2022 models (*Excluding 2009RXP-X255, 2009RXT-X255, SPARK)

●Genuine product number (OEM): 420892592 etc.

●SGS Throttle Body●This is an inexpensive aftermarket part for repair with performance equivalent to genuine parts.

[Adaptation] MIKUNI SUPER BN

Carburetor diaphragm assembly.

● MIKUNI 44mm
●With oil injection fitting
●4 bolts

[Compatible models] YAMAHA
650SJ/700SJ(-95)/700FX/TZ/760XL/VN/RA/1200GP/XL/SUV

[Compatible models] SEA-DOO
RXP-X300 (2021 model)

By increasing the amount of air intake and sending a large amount of air to the engine,
Improved low and medium speed acceleration and increased top speed.

[Compatible models] SEA-DOO
RXP-X300 (2021 model)

By increasing the amount of air intake and sending a large amount of air to the engine,
Improved low and medium speed acceleration and increased top speed.

[Compatible models] SEA-DOO
RXT-X 300 (2020-)
GTX-LTD 300 (2020-)

By increasing the amount of air intake and sending a large amount of air into the engine,
Improves low and medium speed acceleration and increases top speed.

■For MIKUNI ■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use. Please note.

006-9090 90
006-9095 95
006-9100 100
006-9102 102.5
006-9105 105
006-9107 107.5
006-9110 110
006-9112 112.5
006-9115 115
006-9117 117.5
006-9120 120
006-9125 125
006-9130 130

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

●This is a gasket parts set for overhauling the carburetor.
●Please use it for regular cab overhaul.
●It is for one cylinder.

Please choose from below.

----------------------------------------------
[1] 006-346 MIKUNI for SBN 38/44/46mm
[Compatible models]
SEA-DOO: 580/650/720/800(GTI/SPX)
YAMAHA Yamaha ：650/700/760/1100/1200 Non-Power Valve(SJ/GP)
KAWASAKI Kawasaki: Sxi/SxiPro/800X2/800SX-R

[2] 006-352 I-series for MIKUNI S-BN
[Compatible models]
YAMAHA Yamaha: GPR/GP800/GP800R/XL-L/XLT (66E/66V/67X)

[3] 006-351 MIKUNI SBN Seadoo for I-series
[Compatible models]
SEA-DOO: 951

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

■Please use compatible main jets and slow jets for CV cabs and CDCV cabs.
■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use.

006-7110 110
006-7115 115
006-7120 120
006-7125 125
006-7128 128
006-7130 130
006-7132 132
006-7135 135
006-7138 138
006-7140 140
006-7142 142
006-7145 145
006-7148 148
006-7150 150
006-7152 152
006-7155 155
006-7158 158
006-7160 160
006-7162 162
006-7165 165

■Please use compatible main jets and slow jets for CV cabs and CDCV cabs.
■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use.

006-6050 50
006-6055 55
006-6060 60
006-6065 65
006-6068 68
006-6070 70
006-6072 72
006-6075 75
006-6078 78
006-6080 80
006-6082 82
006-6085 85
006-6088 88
006-6090 90
006-6092 92
006-6095 95

Primer fitting used when removing the carburetor choke shaft

[For KEIHIN]
006-538 Primer inlet
006-539 Blind Cap

This is a cap that is attached when the choke butterfly is removed.

006-536: Primer inlet
006-537: Blind cap

[Applicable] MIKUNI SBN carburetor
006-438 For SBN38mm
006-444 For SBN44mm
006-446 For SBN46mm

●This is a replacement butterfly shaft kit for MIKUNI SBN carburetor.
●KIT contents: Shaft, butterfly, E-clip, seal, bushing, nylon washer

●Main jet for CV cab and CDCV cab.

19-1600: SBN38mm
19-1601: SBN44mm

A set of replacement butterfly and shaft.

[Applicable] Mikuni carburetor YAMAHA GP1200R/XLT1200/XL-L

You can easily adjust the screw by replacing it.
Easily change carburetor settings.

[Outlet reason] This is a special price for stock replacement.

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

[Compatible models]
For KAWASAKI 1200/1100 KEIHIN CDCV carburetor *We apologize, but we cannot accept inquiries regarding compatibility other than those listed above.

By changing the spring rate, it is possible to change the opening and closing timing of the vacuum valve of the CV carburetor.
●3 types x 1 each ●Spring rate 55, 60, 65

[Compatible models] YAMAHA
2009~2012 1.8L HO-NA Models・VXR・VXS

Just remove the genuine mesh filter and replace it with this power ring.
Improved airflow provides more power and increases top speed.

[Applicable models] YAMAHA Yamaha supercharger model *SVHO cannot be installed
GP1800
All FZ / FX SHO Models
2013～ VXR / VXS Models
2013~ FX HO Models

Just remove the genuine mesh filter and replace it with this power ring.
Improved airflow provides more power and increases top speed.

Compatible with: 8 holes for MIKUNI

●1 piece
●Weight: 15g
●Adjustable with 8 holes.
●Wire can be drawn from any position.
●The wide adjustment range of the carburetor wire provides uniform acceleration over the entire opening range.

[Compatible models]
●YAMAHA SJ (2021 model)

●Far exceeds normal suction efficiency.

●The power filter stably supplies cold air to the supercharged engine,
Provides significantly improved acceleration and rpm.

[Compatible models]
●YAMAHA GP1800 (-2020)

●Far exceeds normal suction efficiency.

●The power filter stably supplies cold air to the supercharged engine,
Provides significantly improved acceleration and rpm.

● Restricted stock airbox via high capacity 4” adapter
Replaced with a high-precision intake duct that attaches to the supercharger.

[Compatible models] YAMAHA
FXSVHO (2014-18)
FX SHO (2012-16)

●By increasing the amount of air intake and sending a large amount of air to the engine.
Low and medium speed acceleration will improve and top speed will also increase.

●The filter section uses a 4-inch big type made by K&N.
Cool air is taken in from the front, farther away from the engine body, increasing intake efficiency to the engine.
The pipe part is made of lightweight resin.

[Compatible models]
●YAMAHA SHO('08~'11)/FZR/FZS('09~'11)

●By increasing the air intake and sending a large amount of air into the engine, low and medium speed acceleration will improve and maximum speed will also increase.

[Compatible models]
KAW/YAM/SD ALL model

●By increasing the amount of air intake and sending a large amount of air into the engine, low and medium speed acceleration will be improved and maximum speed will also be increased.

[Compatible models] SEA-DOO
RXP-X300 (2021 model)

By increasing the amount of air intake and sending a large amount of air to the engine,
Improved low and medium speed acceleration and increased top speed.

[Compatible models] SEA-DOO WAKE PRO 230 ('18-'19)

By increasing the amount of air intake and sending a large amount of air into the engine,
Improves low and medium speed acceleration and increases top speed.

[Compatible models] SEA-DOO SPARK Spark

By increasing the amount of air intake and sending a large amount of air into the engine,
Improves low and medium speed acceleration and increases top speed.

[Compatible models] SEA-DOO
RXT-X300 (2018-19)
GTX-L300 (2018-19)

By increasing the amount of air intake and sending a large amount of air into the engine,
Improves low and medium speed acceleration and increases top speed.

[Compatible models]
KAWASAKI Kawasaki NEW SX-R

●Provides a steady supply of cool air to the engine, significantly improving acceleration and RPM.

• This system draws cool air from the front of the engine compartment near the hull vents.

●Replaces restrictive stock airbox with a high volume precision molded intake tract.

●Cooling air enters the system through an oversized K&N filter element.

[Compatible models] KAWASAKI ULTRA 310/300

The extra-large filter and large-diameter 4-inch pipe are unaffected by the heat in the engine compartment.
Air is sent to the supercharger to improve both acceleration and top speed.
Comes with a water-repellent pre-filter.

■Filter installation diameter: 4 inches (approx. 100mm)

[Compatible models]
KAWASAKI Kawasaki
ULTRA 260/250

By increasing the amount of air intake and sending a large amount of air into the engine,
Low and medium speed acceleration is improved, and top speed is also increased.

[Compatible models]
KAWASAKI STX-15F/15S/12F

●By increasing the amount of air intake and sending a large amount of air into the engine,
Low and medium speed acceleration is improved and top speed is also increased.

● Directly mounted on the throttle body to increase intake efficiency.

■With water repellent pre-filter
■Included: Small filter for blizzer x 2

[Compatible with] MIKUNI carburetor
[Size] Throttle cable mounting hole 9mm

●Used to secure the throttle cable when replacing with an aftermarket carburetor.

[Compatible models] KAWASAKI
550C/650/750Xi/X4/STS/Sxi-95/900Zxi/1100STX/Zxi-97

●Keihin 38-42mm
●2 bolts long