Collection: Grease, anti-rust lubricant, cleaner

■Additive for storing fuel in a marine jet for long periods of time, such as during the winter.
■Prevents gasoline deterioration and keeps the fuel system clean and suppresses corrosion.
■A must-have item for 4-stroke and catalyst models!
■Made in the USA
■Capacity 355ml (12oz)

■Category 4, 2nd petroleum, danger level 2
■Flash point: 11.0℃, boiling point 82.2℃

[How to use]
Add 3 ml of this agent to 1 liter of gasoline.
If stored for more than 2 months,
Add 8 ml of this agent to 1 liter of fuel, fill up the tank, start the engine, and circulate combustion through the fuel system.

■Newly adopted 2WAY nozzle! It can be used in two ways: diffusion and spot nozzle.
■With excellent water displacement properties, it can penetrate under seawater and form a waterproof film with just one spray.
■Excellent performance as a moisture barrier, penetrant, and lubricant.

■Capacity: 480ml

Urea-based high multi-grease
It has excellent heat resistance, water resistance, and lubricity, and can be used around pins and sliding parts to bearing parts that are subject to high temperatures and high loads.
Grease that can be used for all purposes.

A multi-purpose grease containing Teflon that is highly waterproof and difficult to dissolve in water.

● Contents: 400g

SEA-DOO Since this is a genuine product, we cannot accept returns or exchanges.

Developed to maximize the performance of the Rotax engine
Primix coolant.

■Capacity: 946ml
maintenance supplies

[Contents] 1.9L
【how to use】
1. Remove dirt such as mud with plenty of water.
2. Mix boat soap and water to remove large stains such as oil soot.
*Although it is used diluted with water, please use the undiluted solution on heavily soiled areas.

[Application] For FRP parts of boats and campers.

Meguiar's Boat Soap has a rich and fine lather.
It removes bubbles easily and does not leave a white residue.
Because it is a gel-like liquid, it does not drip easily and has good work efficiency, and can be cleaned with fine foam.

●Includes importer's Japanese instruction manual

*We cannot accept delivery to private residences as this is a limited delivery item specified by a corporation/trade name (work place, etc.). *
Currently, we are unable to reflect the regular shipping charges when placing an order.
Therefore, please note that we will correct the specified shipping fee and provide new information.

●Hokkaido ¥18,700
●Tohoku ¥10,450
●Kanto/Shinetsu ¥9,900
●Hokuriku/Chubu/Kansai ¥9,900
●Chugoku/Shikoku ¥8,800
●Kyushu ¥9,900
*For Okinawa and remote islands belonging to each prefecture, we will provide a quote on a case-by-case basis, so please let us know.

●This is a boat platform that is ideal for maintenance and display of PWCs, boats, etc.
●Height can be adjusted to match the trailer loading platform.
●Equipped with locking swivel casters (2 on each side) for easy movement.
●The surface of the frame is galvanized (hot dip galvanized) and has excellent corrosion resistance.
*The bank part is made of wood*

[Notes when ordering]
*Since this is a made-to-order item, we cannot accept cancellations or changes after ordering.
*As this is a limited-edition product for corporations, we cannot accept delivery to private residences.

[Product specifications]
-Total length x height x width: 1,830 x 430 x 690mm
-Fixed casters x 2, flexible casters (with stopper) x 2

[Product information]
●Cannot be bundled...To prevent scratches and damage, "combined packaging (combining)" with other products is not possible.
●No returns or exchanges...Due to the characteristics of the product, we cannot accept returns or exchanges after shipping.
●Directly shipped items...Due to their large size, they will be shipped directly from the manufacturer.
●Items with designated shipping charges...Please check the shipping instructions.
●Cash on delivery payment not possible

Water-resistant grease that is effective against oxidation and seawater.

●A necessary grease gun for injecting grease from the grease nipple of the bearing protector.

It is highly corrosion resistant and protects exposed metal parts against salt water.
This is an anti-corrosion grease with particularly excellent adhesion properties that is mainly composed of a special polymer.
The special polymer forms a strong lubricating film that prevents softening even when water or seawater gets mixed in.

[Contents] 50g
[Grade] Consistency No.0 (355-385)/Softer than Grease A
[Application] Lubrication of propeller joints of outboard motors

●A foam type with a high-density glass film that lasts for a long time and can be used without waste.

●Easy to coat, providing excellent water repellency and deep luster.

●Spray type that can be used easily and quickly.

●Since it is a foam type, it is difficult to scatter around, and the smell is easy to handle as it is a non-petroleum based solvent.

●Comes with a dedicated microfiber cloth.

●If the product is heavily soiled, we recommend washing it before use.

All-purpose grease using urea-based thickener. (Improved heat resistance)
Excellent high temperature, durability and rust prevention (water separation properties).
Improved salt water resistance for marine use.

[Contents] 50g Water resistant
[Grade] Consistency No.2 (265-295) Dropping point 250℃
[Applications] For rotating and sliding parts of machinery such as outboard motors and motor drive shafts that require water sealing properties, where water/seawater, etc. penetrate.

●Anti-corrosion penetrating lubricant for ships (grease type)

●A grease with excellent water resistance developed for marine use.

●We promise to improve the rust prevention and lubrication functions of sliding parts over a long period of time. Also, since it is a spray type, you can easily grease the details without getting your hands dirty.

●Applications: Various blocks of equipment - Sliding parts of shackles, etc. - Rotating and sliding parts of winches, etc. - Rotating shafts of hand starters for outboard motors - Crap screw parts, etc. - Other sliding parts that may be exposed to seawater. For rust prevention and lubrication of parts, etc.

●Capacity: 280ml

●Ingredients: Mineral oil, petroleum solvent, rust inhibitor

●Third petroleum type 140ml/Danger class III

A product developed for FRP.
This is an innovative polish that contains high-grade silicone wax and an ultra-fine particle compound that does not affect the material.
Deterioration of gel coat color, stains due to adhesion of marine organisms, etc.
It cleans off raindrops, water scale, etc. that adhere to the hull, and then applies a wax effect on top of it.

■Capacity: 500ml

A product developed for FRP.
It is specially formulated with UV absorbers to protect against UV rays.
It is most effective for boats that are submerged in seawater and constantly exposed to sunlight, wind and rain.

[Applications] For rust prevention and polishing of ship bottoms, hulls, etc., various fittings, and metal parts.

■Liquid type
■Contains ultra-fine particle compound
■Capacity: 500ml

Developed for FRP and specially formulated with ultraviolet absorber to protect against ultraviolet rays.
It is most effective for boats that are submerged in seawater and constantly exposed to sunlight, wind and rain.

[Application] Polishing the bottom of a ship, hull, etc. For rust prevention and polishing of various fittings and metal parts.

■Contains ultra-fine particle compound
■Capacity: 300g

X-ALL Grease

● Contents: 220g

[Applications] Multi-purpose rust inhibitor for corrosion prevention and rust prevention.
[Contents] 400g

A multi-purpose rust inhibitor that penetrates quickly and prevents rust and corrosion.
Suitable for use in seawater and humid environments.
Highly recommended for maintenance inside the engine after using PWC.

SEADOO genuine product

Spray solvent to clean the outside of the engine.
Used to remove dirt such as grease and oil.

Contents: 400g

[Application] Deterioration prevention agent added to residual fuel
[Contents] 240ml

●Adding to remaining fuel during long-term storage prevents deterioration.
●Estimated usage: Approximately 1 bottle is used for 76L of fuel.

*Liquid color and packaging are subject to change without notice.
*Since this is a genuine product, we cannot accept returns or exchanges.

[Contents] 473ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastics, anodized aluminum, etc.
It is effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Contents] 296ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastic, anodized aluminum, etc.
[Effects] Effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

Used between the oil pan and the block where there are relatively many gaps.
A one-component, room temperature curing, oxime-free silicone sealant that is non-corrosive, low volatility, highly flexible and has excellent oil resistance. Ideal for sealing places where the flange mating surface changes due to vibration, such as press-formed covers.
Operating temperature (℃): -70 to 260
Dry to the touch 30 minutes, curing time 24 hours

Gear cases, pumps, heat exchangers, compressor engines, etc.
A liquid sealant that can be used as a molded gasket for all types of metal flanges.
It can seal leaks caused by surface scratches, damage, small distortions, etc.
Solved the problem of molded gaskets sagging, eliminating the need for retightening.
Improves the rigidity of the flange joint.

●Contents: 50ml
●Operating temperature (℃): -55 to 150

●For general metal threaded pipe fittings. Contains Teflon so there is no galling when tightening.
●It has high clay and thixotropic properties, so even large diameters have instant sealing properties.
●Low strength type that can be removed using regular tools.

【detail】
●Contents: 50ml
●Breakdown/Escape Torque (N・m): 7
●Operating temperature range: -55 to 150℃

medium strength 243

●Contents: 50ml (liquid type)
●Recommended screw diameter: M6 to M20
●Breakdown/Escape Torque (N・m): 20/7
●Temperature range (℃): -55 to 150
●Color: Blue

A coating agent containing fluorine-modified silicone.
For protecting and polishing gel coat surfaces of boats and PWCs!
For reproducing black color and polishing resin moldings and gunwales!

■Construction guideline
Aerosol 420ml, application area: approximately 3 to 5.24 feet 2 bottles for ships, 1 bottle for PWC
■Construction method
1. Remove dirt and debris from the area to be applied with a cleaning agent and dry.
2.Apply Marine Glass Coat and spread it over the entire surface using a cloth such as a microfiber cloth.
3. Let it dry at room temperature for about 3 to 8 hours.

●Marine Glass Coat is a coating agent for ship hulls that contains fluorine-modified silicone.
●By forming a glass-like film on the gel coat or painted surface, it creates a glossy luster, and
The water repellent effect reduces the adhesion of dirt and rust, making subsequent cleaning easier◎
●It cures easily at room temperature, so you can easily apply the coating yourself.
It can be used for FRP, so it can be used not only for boat hulls but also for camper shells etc.

[Contents] 946ml
●Brightener (product number: 32092): Brightener adds moisture and shine to wood. If there is dirt on the work surface, remove the dirt with a cheek cleaner, then rub in this agent with a sponge or brush. Leave it on for about 5 minutes, then rinse it off with water and you're done.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

[Contents] 946ml

●Cleaner (product number: 32251): The cleaner removes dirt such as oil from wood, fish blood, and dullness. After applying this agent, please rub it lightly with a brush. Leave it on for about 15 minutes and then wash it off with water.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

[Contents] 3.79L

●A biodegradable and environmentally friendly bilge cleaner. Decomposes oil, grease, gasoline, diesel oil and sludge. The recommended usage is 0.95L for a 25-foot boat.

●If the bilge is dry, pour fresh water into the bilge, let it sit for about an hour, then run the boat before draining. Cleans and refreshes the smell of bilges such as engine rooms.

[Contents] 0.95L

●A biodegradable and environmentally friendly bilge cleaner. Decomposes oil, grease, gasoline, diesel oil and sludge. The recommended usage is 0.95L for a 25-foot boat.

●If the bilge is dry, pour fresh water into the bilge, let it sit for about an hour, then run the boat before draining. Cleans and refreshes the smell of bilges such as engine rooms.

[Contents] 946ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] For fabrics such as awnings and convertible roof fabrics (sun protection, water repellency, etc.)

●A strong film is formed on the surface of the fabric, providing waterproof effects and preventing deterioration such as fading due to UV rays.
Continuous use will maintain the original color of the fabric over many years and prevent the growth of mold.

●Sun protection, water repellency, stain resistance, and mold prevention agent for fabrics (acrylic, Dacron, olefin, cotton, etc.).
●Awnings, convertible roof fabrics, curtains, outdoor wear, Gore-Tex products,
Valid for tents, umbrellas, backpacks, rucksacks, canvas shoes, etc.

【please note】
Cannot be used on vinyl, plastic, rubber, synthetic leather, or FRP.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

medium strength 222

●Contents: 50ml (liquid type)
●Recommended screw diameter: M12 or less
- Destruction/escape torque (N m): 6/4
●Temperature range (℃): -55 to 150
●Color: Purple