Collection: chemical supplies

[Capacity] 20L x 1 bottle For both separation and mixing

Can be used for both types of engines with and without catalyst.
Also, be sure to use this oil for engines with catalysts.
2 cycle oil

*[Cannot be shipped together with other products]

Urea-based high multi-grease
It has excellent heat resistance, water resistance, and lubricity, and can be used around pins and sliding parts to bearing parts that are subject to high temperatures and high loads.
Grease that can be used for all purposes.

[Content capacity] 2L, 5L
[How to use] Put the detergent in a plastic bucket, apply it to the hull with a brush, etc., and wash it with water after 5 to 10 minutes.
[Application] A detergent for removing red rust from iron on FRP ships and dirt at the same time.

【please note】
*As this is an acidic detergent, please be careful not to get it in your eyes or directly on your skin.
*The rust remover may turn yellow, but there is no problem with the ingredients.

●Made by Takeuchi Kasei Co., Ltd.

X-ALL Grease

● Contents: 220g

[Capacity] 946ml x 12 bottles (case)
[Compatibility] For ROTAX 587/657/717 engines

Keep your engine clean at all times
Minimizes spark plug misfires.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

[Applications] Multi-purpose rust inhibitor for corrosion prevention and rust prevention.
[Contents] 400g

A multi-purpose rust inhibitor that penetrates quickly and prevents rust and corrosion.
Suitable for use in seawater and humid environments.
Highly recommended for maintenance inside the engine after using PWC.

SEADOO genuine product

Synthetic oil ideal for maintenance of SEA-DOO jet pumps.

maintenance supplies

●Contents: 177ml

SEA-DOO Since this is a genuine product, we cannot accept returns or exchanges.

Spray solvent to clean the outside of the engine.
Used to remove dirt such as grease and oil.

Contents: 400g

[Application] For corrosion prevention and rust prevention
[Contents] 350g

Effective in preventing corrosion and rust of engine parts during storage.
This is especially effective when storing for long periods of time.

SEADOO genuine product

[Application] Deterioration prevention agent added to residual fuel
[Contents] 240ml

●Adding to remaining fuel during long-term storage prevents deterioration.
●Estimated usage: Approximately 1 bottle is used for 76L of fuel.

*Liquid color and packaging are subject to change without notice.
*Since this is a genuine product, we cannot accept returns or exchanges.

Developed to maximize the performance of the Rotax engine
Primix coolant.

■Capacity: 946ml
maintenance supplies

[Capacity] 946ml x 12 bottles (case)
[Compatibility] For ROTAX 787/787RFI/947/947DI engine

A further evolution of conventional synthetic oil,
Developed for ROTAX 2-stroke cab models, RFI and DI engines.

[Contents] 473ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastics, anodized aluminum, etc.
It is effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Contents] 296ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastic, anodized aluminum, etc.
[Effects] Effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

Used between the oil pan and the block where there are relatively many gaps.
A one-component, room temperature curing, oxime-free silicone sealant that is non-corrosive, low volatility, highly flexible and has excellent oil resistance. Ideal for sealing places where the flange mating surface changes due to vibration, such as press-formed covers.
Operating temperature (℃): -70 to 260
Dry to the touch 30 minutes, curing time 24 hours

Gear cases, pumps, heat exchangers, compressor engines, etc.
A liquid sealant that can be used as a molded gasket for all types of metal flanges.
It can seal leaks caused by surface scratches, damage, small distortions, etc.
Solved the problem of molded gaskets sagging, eliminating the need for retightening.
Improves the rigidity of the flange joint.

●Contents: 50ml
●Operating temperature (℃): -55 to 150

●For general metal threaded pipe fittings. Contains Teflon so there is no galling when tightening.
●It has high clay and thixotropic properties, so even large diameters have instant sealing properties.
●Low strength type that can be removed using regular tools.

【detail】
●Contents: 50ml
●Breakdown/Escape Torque (N・m): 7
●Operating temperature range: -55 to 150℃

medium strength 243

●Contents: 50ml (liquid type)
●Recommended screw diameter: M6 to M20
●Breakdown/Escape Torque (N・m): 20/7
●Temperature range (℃): -55 to 150
●Color: Blue

[Contents] 2L
[How to use] For removing red rust, blue rust on the hull, removing stains from the wood of the deck, and cleaning light oily substances.

It does not cause corrosion damage to painted surfaces or metal surfaces of the hull, and the luster of the hull does not disappear.

▼How to use▼
Wet the area to be cleaned with water before use.
For normal use, dilute it 3 times and adjust the concentration depending on the degree of dirt.
Using rubber gloves, thoroughly soak a brush, sponge, or cloth in detergent and scrub depending on the degree of dirt.
Be sure to rinse thoroughly with plenty of tap water within 2 minutes to ensure that no Hytrail ingredients remain.
Wipe off moisture with a dry cloth.

*Please try it in an inconspicuous place before use.
*Do not leave it on for more than 2 minutes as it may change color.

Notes
・Never use a spray bottle.
・Do not use on glass surfaces such as automobiles or aluminum parts of vehicles.
・Please do not use the product under the blazing sun or when the product is hot, as stains and uneven color may occur and will be difficult to wipe off.
・Please do not use coatings (mirror finishing, etc.) or painted areas as they will peel off.

A coating agent containing fluorine-modified silicone.
For protecting and polishing gel coat surfaces of boats and PWCs!
For reproducing black color and polishing resin moldings and gunwales!

■Construction guideline
Aerosol 420ml, application area: approximately 3 to 5.24 feet 2 bottles for ships, 1 bottle for PWC
■Construction method
1. Remove dirt and debris from the area to be applied with a cleaning agent and dry.
2.Apply Marine Glass Coat and spread it over the entire surface using a cloth such as a microfiber cloth.
3. Let it dry at room temperature for about 3 to 8 hours.

●Marine Glass Coat is a coating agent for ship hulls that contains fluorine-modified silicone.
●By forming a glass-like film on the gel coat or painted surface, it creates a glossy luster, and
The water repellent effect reduces the adhesion of dirt and rust, making subsequent cleaning easier◎
●It cures easily at room temperature, so you can easily apply the coating yourself.
It can be used for FRP, so it can be used not only for boat hulls but also for camper shells etc.

[Contents] 946ml
●Brightener (product number: 32092): Brightener adds moisture and shine to wood. If there is dirt on the work surface, remove the dirt with a cheek cleaner, then rub in this agent with a sponge or brush. Leave it on for about 5 minutes, then rinse it off with water and you're done.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

[Contents] 946ml

●Cleaner (product number: 32251): The cleaner removes dirt such as oil from wood, fish blood, and dullness. After applying this agent, please rub it lightly with a brush. Leave it on for about 15 minutes and then wash it off with water.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

[Contents] 3.79L

●A biodegradable and environmentally friendly bilge cleaner. Decomposes oil, grease, gasoline, diesel oil and sludge. The recommended usage is 0.95L for a 25-foot boat.

●If the bilge is dry, pour fresh water into the bilge, let it sit for about an hour, then run the boat before draining. Cleans and refreshes the smell of bilges such as engine rooms.

[Contents] 0.95L

●A biodegradable and environmentally friendly bilge cleaner. Decomposes oil, grease, gasoline, diesel oil and sludge. The recommended usage is 0.95L for a 25-foot boat.

●If the bilge is dry, pour fresh water into the bilge, let it sit for about an hour, then run the boat before draining. Cleans and refreshes the smell of bilges such as engine rooms.

[Contents] 473ml

●The concentrate of this product contains 100% of the world's purest oils, including tung oil, which restores and protects the surface of teak to its natural finish color. It penetrates deeply and surrounds the wood fibers, preventing moisture and other components from entering that would damage the wood of teak.

[Contents] 946ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] For fabrics such as awnings and convertible roof fabrics (sun protection, water repellency, etc.)

●A strong film is formed on the surface of the fabric, providing waterproof effects and preventing deterioration such as fading due to UV rays.
Continuous use will maintain the original color of the fabric over many years and prevent the growth of mold.

●Sun protection, water repellency, stain resistance, and mold prevention agent for fabrics (acrylic, Dacron, olefin, cotton, etc.).
●Awnings, convertible roof fabrics, curtains, outdoor wear, Gore-Tex products,
Valid for tents, umbrellas, backpacks, rucksacks, canvas shoes, etc.

【please note】
Cannot be used on vinyl, plastic, rubber, synthetic leather, or FRP.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

medium strength 222

●Contents: 50ml (liquid type)
●Recommended screw diameter: M12 or less
- Destruction/escape torque (N m): 6/4
●Temperature range (℃): -55 to 150
●Color: Purple

[Contents] 1.9L
【how to use】
1. Remove dirt such as mud with plenty of water.
2. Mix boat soap and water to remove large stains such as oil soot.
*Although it is used diluted with water, please use the undiluted solution on heavily soiled areas.

[Application] For FRP parts of boats and campers.

Meguiar's Boat Soap has a rich and fine lather.
It removes bubbles easily and does not leave a white residue.
Because it is a gel-like liquid, it does not drip easily and has good work efficiency, and can be cleaned with fine foam.

●Includes importer's Japanese instruction manual

High strength 277

●Contents: 50ml (liquid type)
●Recommended screw diameter: M50 or less
- Destruction/escape torque (N m): 32/32
●Temperature range (℃): -55 to 150
●Color: red