Collection: Best Selling Products

[Compatible models] SEA-DOO 900 SPARK

This package includes gaskets necessary for engine overhaul.
OEM #: 420686230

[Compatible models] SEADOO 4TEC

OEM #:420931130

Cheaper than genuine parts! !
sea ​​doo shaft carbon ring

●Compatible with all SEA-DOO 2-stroke models.
Genuine product number: 272000770

[Applicable models] SEA-DOO SPARK, GTI SE90

[Information] Please select and use a compatible product.
●300 horsepower 4 stroke…Product number: 420956744
●260 horsepower or less...Product number: 420956741
●SPARK, GTI SE90... Product number: 420956123★

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
The engine oil can wash away the generated substances, allowing the engine to continue working normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

SPARK since 2016

[Note]
SEA DOO's RFID system (wireless digital encoding security system) is not allowed!
*Programming work is required after purchase.

Genuine safety lanyard

[Disclaimer]
As these are genuine parts, prices may change without notice.

Compatible with SEA/DOO RFID system
(Wireless Digital Encoding Security System)

*Programming work is required after purchase.

Genuine safety lanyard

[Disclaimer]
As these are genuine parts, prices may change without notice.

Safety Lanyard

Compatible with SEA-DOO's iControl system

*Please note that programming work is required after purchase, so please check before purchasing.

[Disclaimer] Prices of genuine parts may change without notice.

[Compatible models] SEA-DOO
RXP-X 300
RXT-X 300
GTX 300 ALL
GTX 230 ALL
WAKE Pro 230
GTR 230(2019-2020)

Since the stock intake hoses are not strong enough, the hoses connecting the supercharger to the intercooler and from the intercooler to the throttle become deformed, creating resistance to smooth intake.

This exclusive silicone hose has high strength and prevents deformation. In addition, the 50mm large-diameter blow-off valve releases unnecessary pressure and protects the supercharger unit when the throttle is turned off .

[Compatible models] SEA-DOO
RXT-X 300 (2020-)
GTX-LTD 300 (2020-)

By increasing the amount of air intake and sending a large amount of air into the engine,
Improves low and medium speed acceleration and increases top speed.

[Compatible models] YAMAHA
GP, FX, VXR, VXS series. Please see below for details.

[Compatible models] YAMAHA
●2020～
[GP] GP1800R SVHO

●2020-2021
[FX] FX SVHO / FX LTD SVHO / FX HO (1.8L)
[FXCRUISER] FX CRUISER SVHO / FX CRUISER HO (1.8L)

●2019
VXR (1.8L) / GP1800R SVHO
[FX] FX SVHO / FX LTD SVHO / FX HO (1.8L)
[FXCRUISER] FX CRUISER SVHO / FX CRUISER HO (1.8L)

●2016-2018 VXR (1.8L)
●2017-2018 GP1800
●2011-2016 VXS (1.8L)

PRO series sponsons.
Achieves agile cornering.
The stability of the corner grip is also outstanding.

[Compatible models]
YAMAHA Yamaha SJ('21)

Bypasses the resonator between the muffler and water box to increase exhaust efficiency.

[Compatible models] SEA-DOO
RXP-X300(2016-2020)
RXP-X260(2012-15)

This is the part that serves as the inlet for the water flow that sends water to the pump.
It has the effect of improving the bite on the water surface.

intake gate

●Applicable models KAWASAKI
ULTRA310X/310LX/310R/310SE
ULTRA300X/300LX
ULTRA260X/260LX
ULTRA250X
ULTRA LX
PRO series sponsons.
Achieves agile cornering.
The stability of the corner grip is also outstanding.

The front zipper makes it easy to put on and take off, and the neoprene padding on the shoulders makes it comfortable to wear. It also has plenty of safety features, including a crotch belt and a life-saving whistle.

■Product size Youth S (Length: 33-42cm / Width: 29-41cm)
Youth M (Length: 37-46cm / Width: 33-45cm)

*You can color and draw using the fabric pens sold separately.

●This product is a swimming aid.
Please use only under the supervision of an instructor.
●If strong pressure is applied to the buoyancy material (foam), it may collapse and reduce buoyancy, so please do not sit on this product, place heavy objects on it, roll it up, or fold it.
●Do not dive while wearing this product. Water pressure may cause the buoyancy material (foam) to twist, which may cause the product to lose its functionality.
●The buoyancy material (foam) may deform and shrink when exposed to high temperatures. Do not place near fire, iron, steam or dry. Also, do not leave in a hot and humid place for a long period of time. This may cause discoloration and deterioration.
If the product is severely worn or damaged, both its strength and buoyancy will decrease. Although this depends on how it is used and stored, we recommend using it for approximately 2 years.
●When storing, wash with fresh water, squeeze out the water thoroughly, and then dry in a well-ventilated place out of direct sunlight before storing.

k [Related words] Swimming, river play, pool, water play, safety aids, kickboard, children, toddlers, infants, kids, juniors, marine sports activities, WATERSPORTS, boat, yacht, kayak, SUP, paddle board, canoe, snorkeling, trekking, life jacket, life vest

[Made-to-order products] It may take approximately one month from the time of order.
*Please note that as this is a made-to-order item, cancellations cannot be made after the order has been placed.

[Compatible models] YAMAHA FX SVHO (2014-2018) *Includes CRUISER

Adjustable sponsons.
The base plate is machined from aluminum.
This is the color version of SE-101039. Available in 3 colors

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

【Color】
SE-101035GR-W Green
SE-101035RED-W Red

●NEW-WIDE (The base is 8mm wider than before, improving running stability!)

●The angle of the side fins can be adjusted steplessly from 0 degrees to -12 degrees with respect to the bottom edge of the sponson plate.

●The protruding amount of the side fins is 25mm from the sponson plate surface.
The rear end of the side fin attachment type sponson plate is cut and the amount of protrusion is reduced.

●Similar to the previous model, the sponson plate can be installed in four positions: up to 24mm in the front and back, and up to 11mm in the top and bottom.

●The flap at the rear end of the base plate can also be adjusted steplessly in the range of 0 degrees to -14 degrees, just like the previous model.
The guideline is engraved, so you can easily adjust the left and right angles.

[Compatible models] YAMAHA FZR / FZS

[1] SE-027020 For STD standard handlebar (STD bar Φ22.4) [2] SE-027020F For FAT fat handlebar (FAT bar Φ28.6)

●Co-developed with Chris Muckle Gauge!
●The handlebar position has been set as low as possible to suit the racing scene.

[Compatible models] YAMAHA FX SHO

[1] SE-027019 For STD standard handlebar (STD bar Φ22.4) [2] SE-027019F For FAT fat bar (FAT bar Φ28.6)

●Co-developed with Chris Muckle Gauge!
●The handlebar position has been set as low as possible to suit the racing scene.

Since it is foldable and open/close, just put the hanger inside the suit from the neck part while it is folded.
The thickness of the hanger creates space inside the suit, allowing for better ventilation and faster drying.
It also has a structure that speeds up drying of wet clothes without leaving hanger marks.

Easy operation and smooth attachment/detachment. Easy one-touch maneuverability with a focus on "ease of use" allows for smooth attachment/detachment even when the neck entry is wet.

■Domestic products

■Material Body: PP / Hook part: Aluminum

The hook, which carries a large load, is made of aluminum, which has excellent durability and corrosion resistance.
The 6mm extra-thick aluminum hook holds firmly in various environments such as the beach or your balcony.
It is also the strongest against corrosion from seawater.
Furthermore, it is a ``strong'' hanger with a wide base of the arm.
The double effect of concave (grooves) and air bunts (holes) that allow moisture to escape improves quick drying!

【please note】
*When removing, be careful not to pinch your fingers.
*For wet suits only. Please do not use it for any other purpose.

[How to store wetsuits]
How you store your wetsuit is important in order to slow down the rate of deterioration of your wetsuit.
Salt and direct sunlight cause rubber deterioration, so avoid storing these two things.
If you thoroughly remove the salt and dry it in a cool, shaded place, the speed of deterioration should be slowed down.
Also, when storing your wetsuit, if you fold it, the creases will get crushed and you won't be able to put it back together. Make sure to hang it on a hanger and store it without folding it.

Surfing Bodyboarding Wakeboarding Wakesurfing Kiteboarding Flyboarding Diving SUP Windsurfing Kayak Canoe Marine Sports

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●NEW-WIDE (The base is 8mm wider than before, improving running stability!)

●The angle of the side fins can be adjusted steplessly from 0 degrees to -12 degrees with respect to the bottom edge of the sponson plate.

●The protruding amount of the side fins is 25mm from the sponson plate surface.
The rear end of the side fin attachment type sponson plate is cut and the amount of protrusion is reduced.

●Similar to the previous model, the sponson plate can be installed in four positions: up to 24mm in the front and back, and up to 11mm in the top and bottom.

●The flap at the rear end of the base plate can also be adjusted steplessly in the range of 0 degrees to -14 degrees, just like the previous model.
The guideline is engraved, so you can easily adjust the left and right angles.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Compatible models] KAWASAKI
For ULTRA310 / ULTRA300 / ULTRA260 / ULTRA250 / ULTRA LX

●The base plate is made from machined aluminum, and the angle can be adjusted at the rear of the base (0 degrees to -8 degrees).
●Comes with a 5mm base plate spacer to accommodate the preferences of all users.

[Applicable model] For Kawasaki 800 X-2 (for freestyle)

●For freestyle The height is 10mm higher than the normal one, and can be adjusted backwards within a range of 20 to 30mm.

[Applicable model] For Kawasaki 800 X-2 (for racing)

●For racing (race specification)
Height is 50mm lower than normal and can be adjusted backwards within a range of 15-25mm.

[Compatible models] YAMAHA Yamaha SJ (2021 and later models)

PRO series sponsons.
You can change the position to suit your riding.
Achieves agile cornering.
The stability of the corner grip is also outstanding.

[Compatible models] YAMAHA SJ (2021 model)

The intake gate is the part that allows water to flow into the pump case.
It has the effect of improving the grounding to the water surface.

[Compatible models] YAMAHA SJ (2021 model)

Improves top speed and handling performance.

[Compatible models] YAMAHA 2015-FX
2015-2021 YAMAHA FX SVHO
2015-2021 YAMAHA FX LTD SVHO
2015-2021 YAMAHA FX HO (1.8L)
2015-2021 YAMAHA FX CRUISER SVHO
2015-2021 YAMAHA FX CRUISER HO (1.8L)
2015 YAMAHA FX SHO (1.8L)

Greater strength and stiffness than the original OEM steering system.
Billet stainless steel steering shaft is much stronger than the stock OEM aluminum shaft.
Cutting-edge lace styling. The bar clamp has variable height and tilt adjustment.
All common 7/8" handlebars are available.
Billet steering arm features an adjustable "quick turn" setting.
Holds the throttle steering system.
All aluminum parts are anodized to prevent corrosion.

[Compatible model] YAMAHA GP1800
2019-2020 YAMAHA GP1800R SVHO
2017-2018 YAMAHA GP1800
2015-2019 YAMAHA VXR (1.8L)
2015-2016 YAMAHA VXS (1.8L)

Greater strength and stiffness than the original OEM steering system.
Billet stainless steel steering shaft is much stronger than the stock OEM aluminum shaft.
Cutting-edge lace styling. The bar clamp has variable height and tilt adjustment.
All common 7/8" handlebars are available.
Billet steering arm features an adjustable "quick turn" setting.
Holds the throttle steering system.
All aluminum parts are anodized to prevent corrosion.

[Compatible models]
YAMAHA
EXR
EX

The resonator between the muffler and water box
Bypass to increase exhaust efficiency.

[Compatible models] YAMAHA
FX CRUISER SHO (2008-11)
FX SHO (2008-11)
FX HO (2009-11)
FZR(2009-2016)
FZS(2014-16)

Exhaust air can flow better and performance will improve.

[Compatible models] YAMAHA
GP1800
VXR (2015~)
VXS (2015~)

Exhaust air can flow better and performance will improve.

[Compatible models] YAMAHA
FZR
FZS (~2016)

Exhaust air can flow better and performance will improve.

[Compatible models]
●YAMAHA SJ (2021 model)

●Far exceeds normal suction efficiency.

●The power filter stably supplies cold air to the supercharged engine,
Provides significantly improved acceleration and rpm.

[Compatible models]
●YAMAHA GP1800 (-2020)

●Far exceeds normal suction efficiency.

●The power filter stably supplies cold air to the supercharged engine,
Provides significantly improved acceleration and rpm.

● Restricted stock airbox via high capacity 4” adapter
Replaced with a high-precision intake duct that attaches to the supercharger.

[Compatible models] YAMAHA
FXSVHO (2014-18)
FX SHO (2012-16)

●By increasing the amount of air intake and sending a large amount of air to the engine.
Low and medium speed acceleration will improve and top speed will also increase.

●The filter section uses a 4-inch big type made by K&N.
Cool air is taken in from the front, farther away from the engine body, increasing intake efficiency to the engine.
The pipe part is made of lightweight resin.

[Compatible models]
SEA-DOO GTX SC 185 / GTX215 / RXP 215 / RXT 215 / RXP-X 255 / RXT-X 255

●Blocks off Opus and improves handling performance.

[Compatible models] SEADOO
2005 to 2011
GTX / RXT / RXP / RXT-X / RXP-X

PRO series sponsons

2003-2004 SEA-DOO GTX SUPERCHARGED 185
2005-2008 SEA-DOO GTX LIMITED 215
2005-2009 SEA-DOO GTX 155
2005-2007 SEA-DOO RXP 215
2005-2009 SEA-DOO RXT 215
2005-2008 SEA-DOO WAKE 155
2006 SEA-DOO GTI PRO 130
2006-2010 SEA-DOO GTI SE 130
2007-2010 SEA-DOO GTI SE 155
2007-2009 SEA-DOO WAKE 215
2008-2010 SEA-DOO RXP-X 255
2008-2009 SEA-DOO RXT-X 255
2009 SEA-DOO GTX LIMITED IS 255
2009 SEA-DOO RXT IS 255
2010-2017 SEA-DOO GTX 155 (IC)
2010 SEA-DOO GTX IS 215
2010-2011 SEA-DOO RXT IS 260
2010-2016 SEA-DOO GTX LTD IS 260
2010-2011 SEA-DOO RXT-X 260 (IC)
2010-2012 SEA-DOO WAKE PRO 215 (IC)
2011-2016 SEA-DOO WAKE 155 (IC)
2011-2017 SEA-DOO GTI 130 (IC)
2011-2013 SEA-DOO GTI SE 155 (IC)
2011 SEA-DOO GTX 215 (IC)
2011-2013 SEA-DOO RXT 260 (IC)
2012 SEA-DOO GTX S 155 (IC)
2012-2016 SEA-DOO GTR 215
2016 SEA-DOO GTX LIMITED 300
2017-2019 SEA-DOO GTR 230
2017-2019 SEA-DOO GTR-X 230
2017 SEA-DOO GTX LIMITED S 260

[Compatible models] SEA-DOO
RXP-X 300 (2021 model)

The resonator between the muffler and water box
Bypass to increase exhaust efficiency.

[Compatible models] SEA-DOO
RXP-X 300 (-2020)
RXT-X 300 (2016-17)
GTX-L 300 (2016-17)

The resonator between the muffler and water box
Bypass to increase exhaust efficiency.

[Compatible models]
SEA-DOO SPARK

The resonator between the muffler and water box
Bypass to increase exhaust efficiency.