Collection: Best Selling Products

[Adaptation] For KAWASAKI 800X-2

[Regarding processing] Styrofoam cutting of the tank is required (*JCI modification application required)
[Note] This product is not subject to complaints as it is a competition part.

Exhaust pipe made by bending aluminum.
Contributes to approximately 50% (grams) lighter weight and lower center of gravity compared to the genuine rubber tube.
Unlike genuine tubes, there is no expansion due to exhaust temperature, reducing trouble.
Carburetor maintenance is more efficient because the pipes are connected to the bottom of the carburetor.
If you use the T-bolt clamp [Product number: JL0250], there is no need to worry about it coming off.
The joint uses a silicone hose that is highly heat resistant, pressure resistant, ozone resistant, and resistant to deterioration.
■Product weight: 1.3kg

【set content】
Pipe body x 1 set
Joint hose Φ60×70mm×2 pieces
Stainless steel clamp x 2

[Compatible models] KAWASAKI
Exhaust diameter Ф50mm
15F('09-)/ULTRA250X('08)/ULTRA260X/ULTRA LX('09-)

★The following model with exhaust port diameter Ф60mm is part number: JL14001.
STX series ('00-'07) *Excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300X/ULTRA LX('07-'08)

●Produces a stylish rear exhaust.
●Machined from aluminum (A6061) with excellent strength and corrosion resistance.
●Cover flange with chemically polished alumite processing and excellent design.

[Compatible models] KAWASAKI
JL14001: Exhaust port diameter Ф60mm
STX series ('00-'07) *Excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300/310/ULTRA LX('07-'08)

★The following model with exhaust port diameter Ф50mm is part number: JL14002.
15F('09-)/ULTRA250X('08)/ULTRA260X/ULTRA LX('09-)

●Produces a stylish rear exhaust.
●Machined from aluminum (A6061) with excellent strength and corrosion resistance.
●Cover flange with chemically polished alumite processing and excellent design.

[Compatible models] SEA-DOO
GTX-4TEC / RXT / RXT-X(-08)

Luxurious stainless steel buffed mirror finish.
Upgrade your visuals by replacing the cheap genuine hook with a polished one!

【correspondence】
KAWASAKI genuine mount (not compatible with some models)
UNLIMITED MOUNT

Standard handlebar 22.4mm diameter

[Material] Aluminum

This is a clamp to hold the handlebars. The clamp is attached at 60.5 degrees. Handlebars
Looking at the installation position from a 60.5° angle, offset it 25 mm upward and 15 mm forward and backward.

[Compatible] Fat bar 28.6mm diameter

*22.4mm handlebar (standard) can also be used with handlebar spacer (product number: UL35002)

[Material] Made of aluminum

Clamp for attaching handlebars.
Since the mounting part is flat, it can be used with Kawasaki genuine mount and UNLIMITED mount.
When installed on the Kawasaki genuine handlebar mount, the handlebar mounting position will be increased by 20mm.

■Correspondence:
KAWASAKI 4 stroke model
SEA-DOO 4 stroke model

■Application: Tool to apply lubrication to the throttle body to prevent it from sticking.

●A must-have item for those riding in seawater!
●Inject lubricant to prevent the throttle body from sticking.

[About installation]
It is necessary to make a hole in the intake pipe using a drill. Install it in front of the genuine throttle body.

[Application] KAWASAKI 750/800 electrical box [Quantity] Blue 1 piece

By replacing the genuine plastic cap, it becomes an accent of the engine room.
With O-ring

For fat bar (tapered handle) only

■Size: 15cm

【correspondence】
runabout model
Compatible with 28.6mm handle clamp
*A separate fat bar clamp (UL061 recommended) is required for installation.

■Handle diameter: Clamp mounting part 28.6mm,
■Grip lever mounting part 22.±0.2mm

A wide handle with a thick clamp part and excellent flexibility and strength.

●A separate throttle adapter (product number: UL002-) is required for installation.
*Kawasaki…Only models before 1995 can be installed without an adapter.

The shape of the tip provides a finger feel that enables fine throttle work!
It is an angled type with the lever tilted 4 degrees downward.

You can adjust the length of the wire and the weight of the throttle.
UNLIMITED handlebar mount switch case (product number: UL014/UL015) can also be used.

■Machined aluminum
■Angle type 4°

[Compatible models]
■Kawasaki: 750SX / SXi / SXi-Pro / 800X-2 / SX-R series (800SX-R / 1500SX-R)
■YAMAHA: 700FX / 700SJ

[About processing]
[1] When installing on a YAMAHA boat...If using a genuine YAMAHA lock: Machining of the lock part is required. A genuine KAWASAKI lock was purchased separately, and a genuine part lock assembly [27016-3703] was prepared and assembled.
[2] Use on KAWASAKI boats: Disassemble the genuine lock and assemble it to the product.

[Material] Stainless steel buffed finish

Excellent strength! Will not rust!
Replacing the original one will give the hull a luxurious feel and accent, making it more stylish.
The long hook design helps to securely lock the hood and prevent it from coming off.
The hook part can also be used with YAMAHA locks (processing required for installation)

[Note] Only the latch, internal parts of the lock part are not included.

[Adaptation] External handlebar

*When used with SEA-DOO genuine handlebars...
[Product number: UL31004 handlebar extender] is required.

[Quantity] 2 pieces 1 set

It prevents the grip of a personal watercraft from slipping off and makes the handlebar part look stylish.
Made of aluminum material for strength and smooth cut.

■Pattern: Border ■Color: Black ■Size: 89 x 119 cm

This reinforced mat eliminates the surface tension of water, allowing for smooth drainage from the deck and providing excellent grip.
Since it is a sheet type, it can be cut freely to create your own original design.

[Note] Adhesive is required for attachment.

This is a hanger specifically designed for wetsuits made by Surflogic.

Shoes, gloves, etc. can be inserted into the top part, so they can be dried easily.

■You can choose from two styles: round hook and carabiner strap.
■Size: Main body W4330mm/H400mm Thickness 40mm Hook single item length 37mm
■Weight: Hook specification approx. 400g Carabiner specification approx. 470g
■Color: Blue

【please note】
*When removing, be careful not to pinch your fingers.
*Please do not use it for other purposes as it is exclusively for wetsuits.

[How to store wetsuits]
How you store your wetsuit is important in order to slow down the rate of deterioration of your wetsuit.
Salt and direct sunlight cause rubber deterioration, so avoid storing these two things.
If you thoroughly remove the salt and dry it in a cool, shaded place, the speed of deterioration should be slowed down.
Also, when storing your wetsuit, if you fold it, the creases will get crushed and you won't be able to put it back together. Make sure to hang it on a hanger and store it without folding it.

Surfing Bodyboarding Wakeboarding Wakesurfing Kiteboarding Flyboarding Diving SUP Windsurfing Kayak Canoe Marine Sports

Highly absorbent! A towel poncho for children that is easy to put on and take off.
The microfiber fabric is soft to the touch and very lightweight.
It can be used not only in the pool, at the beach, or when playing in the water, but also in all outdoor situations.
It's highly absorbent, so you don't need a bath towel.
The microfiber fabric is lightweight and compact for easy carrying.
The microfiber gently wraps around your cold body after coming out of the sea.

■Material: Microfiber (80% polyester, 20% nylon)

Genuine parts for MAX trailers.

■1 set of 2 ■Material: Steel ■Compatibility: Common for regular cars and light cars

[1:97-4333] 1/4×1/4×1/4 Outer diameter 10mm Inner diameter 6mm
[2:97-4335] 1/2×1/2×1/2 Outer diameter 14mm Inner diameter 8.5mm
[3:97-4387] 3/8×3/8×3/8 Outer diameter 11mm Inner diameter 6mm
[4:97-4339] 3/8 x 1/2 x 1/2 Outer diameter 11mm/14mm Inner diameter 6mm/8.5mm.

Shape: T type
Used when installing between cooling hoses to change routing or when creating a bypass line.

Standard deck type tube.
Although the tube has a simple design, towing it close to the water's surface provides a top-class thrill.

[Front towing specification]
■Size: 187.5×155cm
■Maximum capacity: 3 people ■Nylon full cover

[Comes with a JSPTOKAI original bag gift that is convenient for storing supplies]

A 56L large capacity bag that can store 4 life jackets at once.The U-shaped zipper allows you to open the top wide and store your marine gear.
The bottom is made of mesh material that allows water to drain.
With this bag, you can solve the problem of carrying and storing goods!
(Size: 50x45x25cm/ Fabric: Clear PVC black mesh)

Trailer frame compatible with 50mm width
*Displayed size may vary depending on individual items.
*If there is any wobble even after tightening sufficiently, please prepare a separate spacer.

●Made of stainless steel with the highest durability and corrosion resistance.
●Stainless steel polished mirror finish emphasizes stylishness.

[Product specifications]
■Ball diameter: 2 inch compatible
■Mounting frame width: 50mm compatible
■Mounting hole spacing: approx. 77mm
■Maximum towing weight: 1,588kg
■Material: Stainless steel mirror finish
*There is also a product compatible with 75mm trailer frame. [Product number TC-03SUSP]

Size free

Excellent water absorption! A generously sized poncho for changing clothes.
It's made of microfiber fabric so it's very lightweight.

It can be used not only at the pool, at the beach, and when playing in the water, but also in all outdoor situations.

Excellent water absorption! So of course you don't need a bath towel.
The latest microfiber fabric is very lightweight and compact to carry.
Microfiber gently wraps your body after getting out of the sea.

■ Finished dimensions: Width 79cm Length 111cm
■Material: Microfiber (80% polyester, 20% nylon)

jet ski watercraft watercraft watercraft
Surfing Bodyboarding Wakeboarding Wakesurfing Kiteboarding Flyboarding Diving SUP Windsurfing Kayak Canoe Snorkeling Fishing Marine Sports Skiing Snowboarding Trekking Camping Glamping

[Quantity] 3784ml x 4 bottles set
[Applicable] 2-stroke mixing/separation DI/catalyst compatible racing

●Excellent lubrication performance under harsh operating conditions in the high rotation range,
This is the highest quality oil that brings out the full performance of high-performance engines by maintaining the liquid state due to high temperatures.

[Quantity] 1L x 12 pieces set
[Applicable] 2-stroke mixing/separation DI/catalyst compatible racing

●Excellent lubrication performance under harsh operating conditions in the high rotation range,
This is the highest quality oil that brings out the full performance of high-performance engines by maintaining the liquid state due to high temperatures.

[Quantity] 1892ml x 6 bottles set
[Applicable] 2-stroke mixed racing

●The most advanced high-grade 2-stroke engine oil manufactured based on the latest chemical synthesis.
●Compared to other oils, it maintains the liquid state at high temperatures and the slippage of the ring is much improved.

[Quantity] 473ml x 12 bottles set
[Applicable] 2-stroke mixed racing

●The most advanced high-grade 2-stroke engine oil manufactured based on the latest chemical synthesis.
●Maintains liquid state at higher temperatures than other oils,
●Significantly improves ring slippage.

NGK spark plugs for outboard motors

[LKR6E compatible model] DF200A/200AP

● Sold in single units
*The image is an illustrative image.

NGK spark plugs for outboard motors

[DCPR6E compatible models]
SUZUKI DF9.9/15 ('98-'03)
DF25/30 (3-cylinder)
DF40/50
DF40A/50A/60A
DF70A/80A/90A

● Sold in single units

SUZUKI DF2

NGK spark plug for outboard motors

[CR6HSA compatible model]
SUZUKI DF2

●Sold in units of one. Please purchase as many as you need.

*The image is an image photograph.

NGK spark plug for outboard motors

[CR6E compatible model]
DF8A/9.9A

●Sold in units of one. Please purchase as many as you need.

*The image is an image photograph.

NGK spark plugs for outboard motors

[CPR6EA-9 compatible model]
SUZUKI DF5 ('11-)
DF5A/6A
DF9.9/15 ('11~)
DF9.9/15A/20A
DF25A/30A

● Sold in single units
*The image is an illustrative image.

NGK spark plug for outboard motors

[BPR6ES]
SUZUKI Suzuki outboard motor compatible models: DF5 (~'10 MODEL)/DF60/DF70

●Sold in units of one. Please purchase as many as you need.

*The image is an image photograph.

NGK spark plug for outboard motors

[BKR6E compatible model]
DF90・115・140・175・200・225・250
DF9.9/15 ('04-'10 MODEL)
DF25 (V2)
DF90/100/115/140/100A/115A/140A
DF150/175/150TG/175TG
DF200/225/250

●Sold in units of one. Please purchase as many as you need.

*The image is an image photograph.

Material: Main body = SUS304

Size: d=10 L=110 L1=90 B=48 B1=28 S=13

Weight: 140g

Working load: 150Kg

1/8 x 1/8 x 1/8 outer diameter 4mm inner diameter 1.8mm.

Attach between cooling hoses and use when changing routing or creating a bypass line.

carry

[Compatible car model] DA16T

Traction force: A (40kg or less)

*Drilling process

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plate are SUS304 stainless steel type.
A stylish and reasonably priced hitch member whose main visible cross member is made of stainless steel.

【set content】
Stainless hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

carry

[Compatible car model] DA16T

[Traction force] A (40kg or less)

*Drilling process

[Steel (steel type)]
Basic type with tight hitch.

【set content】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Car side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that this item is completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

jimny sierra

[Compatible car model] 3BA-JB74W

[First year registration] 2019~

Traction force: B (500kg or less)
Estimated installation time: Approximately 5 hours

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plate are SUS304 stainless steel type.
A stylish and reasonably priced hitch member whose main visible cross member is made of stainless steel.

【set content】
Stainless hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

jimny sierra

[Compatible car model] 3BA-JB74W

[First year registration] 2019~

[Traction force] B (500kg or less)
[Estimated installation time] Approximately 5 hours

[Steel (steel type)]
Basic type with tight hitch.

【set content】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Car side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that this item is completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

Jimny 1 type to 10 type

[Compatible car model] ABA-JB23W *Type 1 to Type 10

[First year registration] H10.10～

[Steel (steel type)]
Basic type with tight hitch.

Traction force: B (500kg or less)
Estimated installation time: 4

【set content】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Car side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that this item is completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

●24V compatible. 6 LED lights.
■Size: Height 23 x Width 80 x Thickness 32mm
■Cord length: Approximately 61cm (excluding bullets and round terminals)
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■MAX TRAILER triangle reflector

■Size: 160mm on one side (with bolts)

■Upper and lower mounting holes

■Quantity: 1 piece