Collection: Best Selling Products

[Product specifications]
◆Material: SUS304

◆Length: 30m

◆Size: 6 d=6 L=43 B=21 Weight 20.1kg Reference working load=270Kg

◆It is a stainless steel anchor chain that is resistant to rust.

Dodge Nitro
ABA-KA37

Towing capacity: 750kg
Mount Slant type hitch ball Short ball *Bolt-on installation *Compatible with 50mm square mounts

[Steel (steel type)]
Basic type of tight hitch.

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that since this is a made-to-order product, cancellations and changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
Generally, items are shipped directly from the manufacturer.
-Delivery to Okinawa Prefecture will be by sea and will take 7-10 days after shipping.

AQUA/GR Sports TOYOTA [Compatible vehicle model] DAA-NPH10

■Towing capacity: 750kg
■Slant mount type■Hitch ball short

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plates are made of SUS304 stainless steel.
This is a stylish and affordable hitch member with the main visible cross member made from stainless steel.

[Set contents]
Stainless steel hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Since this is a made-to-order product, cancellations or changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
Please check compatibility before placing your order.
*The photo is an example, and the installation method and shape may vary depending on the vehicle model. Also, modifications to the towing vehicle may be required.
-As this is a made-to-order product, returns and exchanges are not possible.

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
-Cash on delivery is not available as this item is shipped directly from the manufacturer.

[Shipping to Okinawa and remote islands]
1. Since this item is shipped by sea, it will take 7-10 days to arrive after shipping.

AQUA/GR Sports TOYOTA [Compatible vehicle model] DAA-NPH10

■Towing capacity: 750kg
■Slant mount type■Hitch ball short

[Steel (steel type)]
Basic type of tight hitch.

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Since this is a made-to-order product, cancellations or changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
Please check compatibility before placing your order.
*The photo is an example, and the installation method and shape may vary depending on the vehicle model. Also, modifications to the towing vehicle may be required.
-As this is a made-to-order product, returns and exchanges are not possible.

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
-Cash on delivery is not available as this item is shipped directly from the manufacturer.

TOYOTA C-HR Toyota... TRD (Aggressive Style) 10 Series [Compatible Vehicle Model] DAA-ZYX10
*Products for standard bumpers are: 9052-02/9052-00

… S”GR SPORT”
[Compatible car model] 6AA-ZYX11
*Can be installed on vehicles with GR rear bumper spoiler

■Towing capacity: 750kg
■Mount slant type ■Hitch ball short ball *Bolt-on installation

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plates are made of SUS304 stainless steel.
This is a stylish and affordable hitch member with the main visible cross member made from stainless steel.

[Traction force] C (750kg or less)
[Estimated installation time] Approximately 3 hours

[Set contents]
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that depending on the material and type, items may be made to order, so cancellations or changes cannot be made after placing an order.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
Generally, items are shipped directly from the manufacturer.

[Shipping to Okinawa and remote islands]
1. Since this item is shipped by sea, it will take 7-10 days to arrive after shipping.

TOYOTA C-HR Toyota... TRD (Aggressive Style) 10 Series [Compatible Vehicle Model] DAA-ZYX10
*Products for standard bumpers are: 9052-02/9052-00

… S”GR SPORT”
[Compatible car model] 6AA-ZYX11
*Can be installed on vehicles with GR rear bumper spoiler

■Towing capacity: 750kg
■Mount slant type ■Hitch ball short ball *Bolt-on installation

[Steel (steel type)]
Basic type of tight hitch.

[Traction force] C (750kg or less)
[Estimated installation time] Approximately 3 hours

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that since this is a made-to-order product, cancellations and changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
Generally, items are shipped directly from the manufacturer.

[Shipping to Okinawa and remote islands]
1. Since this item is shipped by sea, it will take 7-10 days to arrive after shipping.

TOYOTA C-HR Standard Bumper Toyota
(ELEGANT ICE/Normal 10 series *Elegance Ice Style Boost Impulse can be installed [Compatible vehicle model] DAA-ZYX10

■Towing capacity: 750kg
■Mount: Slant low type ■Hitch ball: Long ball *Bolt-on installation

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plates are made of SUS304 stainless steel.
This is a stylish and affordable hitch member with the main visible cross member made from stainless steel.

[Set contents]
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that depending on the material and type, items may be made to order, so cancellations or changes cannot be made after placing an order.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
Generally, items are shipped directly from the manufacturer.

[Shipping to Okinawa and remote islands]
1. Since this item is shipped by sea, it will take 7-10 days to arrive after shipping.

TOYOTA C-HR Standard Bumper Toyota
(ELEGANT ICE/Normal 10 series *Elegance Ice Style Boost Impulse can be installed [Compatible vehicle model] DAA-ZYX10

■Towing capacity: 750kg
■Mount: Slant low type ■Hitch ball: Long ball *Bolt-on installation

[Steel (steel type)]
Basic type of tight hitch.

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that since this is a made-to-order product, cancellations and changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
Generally, items are shipped directly from the manufacturer.

[Shipping to Okinawa and remote islands]
1. Since this item is shipped by sea, it will take 7-10 days to arrive after shipping.

TOYOTA RAV4 Toyota [Compatible vehicle model] MXAA54 *TRD aero compatible Modellista/TRD/ADVENTURE

■Towing capacity: 750kg
■Mount slant type ■Hitch ball short ball *Bolt-on installation

[Steel (steel type)]
Basic type of tight hitch.

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that since this is a made-to-order product, cancellations and changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
Generally, items are shipped directly from the manufacturer.
-Delivery to Okinawa Prefecture will be by sea and will take 7-10 days after shipping.

TOYOTA RAV4 Toyota Love Four [Compatible vehicle model] DBA-ACA31W
[First year of registration] November 2005 to 2015

■Towing capacity: 750kg
■Mount slant type ■Hitch ball short ball *Bolt-on installation

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plates are made of SUS304 stainless steel.
This is a stylish and affordable hitch member with the main visible cross member made from stainless steel.

[Set contents]
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that depending on the material and type, items may be made to order, so cancellations or changes cannot be made after placing an order.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
Generally, items are shipped directly from the manufacturer.
-Delivery to Okinawa Prefecture will be by sea and will take 7-10 days after shipping.

TOYOTA RAV4 Toyota Love Four [Compatible vehicle model] DBA-ACA31W
[First year of registration] November 2005 to 2015

■Towing capacity: 750kg
■Mount slant type ■Hitch ball short ball *Bolt-on installation

[Steel (steel type)]
Basic type of tight hitch.

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that since this is a made-to-order product, cancellations and changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
Generally, items are shipped directly from the manufacturer.
-Delivery to Okinawa Prefecture will be by sea and will take 7-10 days after shipping.

Alphard S Vellfire Z 30 series

Model: DBA-GGH-35W

Common to all grades Hybrid installation possible *Moderista Aero cannot be installed

Drilling required.
Traction force: C (750kg or less)
Estimated installation time: 4

[Steel (steel type)]
Basic type with tight hitch.

【set content】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Car side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that this item is completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.
・Delivery to Okinawa Prefecture will be delivered 7-10 days after shipping as it will be shipped by sea.

[Compatible grades] Alphard (G/X), Vellfire (V/X), Modelista Aero

Model: DBA-ANH20W / DBA-ANH25W
DBA-GGH20W / DBA-GGH25W

Grade: Modelista/V/X base *Cannot be installed on S/Z base

Drilling required

■Traction force: C (750kg or less)
■Estimated installation time: 5.0

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plate are SUS304 stainless steel type.
A stylish and reasonably priced hitch member whose main visible cross member is made of stainless steel.

【set content】
Stainless hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.
・Delivery to Okinawa Prefecture will be delivered 7-10 days after shipping as it will be shipped by sea.

[Compatible grades] Alphard (G/X), Vellfire (V/X), Modelista Aero

Model: DBA-ANH20W / DBA-ANH25W
DBA-GGH20W / DBA-GGH25W

Grade: Modelista/V/X base *Cannot be installed on S/Z base

[Stainless steel [type-1] (all stainless steel type)]
All side plates, cross members, etc. are SUS304 stainless steel type.
A top-of-the-line model with features, styling, and materials that are unique to Tight Hitch.

Drilling required.
[Traction force] C (750kg or less)
[Estimated installation time] Approximately 5 hours

【set content】
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

[Compatible grades] Alphard (G/X), Vellfire (V/X), Modelista Aero

Model: DBA-ANH20W / DBA-ANH25W
DBA-GGH20W / DBA-GGH25W

Grade: Modelista/V/X base *Cannot be installed on S/Z base

*Drilling required.

■Traction force: C (750kg or less)
■Estimated installation time: 3.5

[Steel (steel type)]
Basic type with tight hitch.

【set content】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Car side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that this item is completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.
・Delivery to Okinawa Prefecture will be delivered 7-10 days after shipping as it will be shipped by sea.

[Compatible grade] Alphard (S)/Vellfire (Z) 20 series large bumper

[Compatible car model] DBA-ANH20W/25W DBA-GGH20W/25W

[First year registration] H20.5 - H27.1

■Traction force: C (750kg or less)
■Estimated installation time: 5.0

[Stainless steel [type-1] (all stainless steel type)]
All side plates, cross members, etc. are SUS304 stainless steel type.
A top-of-the-line model with features, styling, and materials that are unique to Tight Hitch.

【set content】
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.
・Delivery to Okinawa Prefecture will be delivered 7-10 days after shipping as it will be shipped by sea.

[Compatible grade] Alphard (S)/Vellfire (Z) 20 series large bumper

[Compatible car model] DBA-ANH20W/25W DBA-GGH20W/25W

[First year registration] H20.5 - H27.1

Drilling 3 places on one side
C3.5

[Steel (steel type)]
Basic type with tight hitch.

【set content】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Car side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that this item is completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.
・Delivery to Okinawa Prefecture will be delivered 7-10 days after shipping as it will be shipped by sea.

[Compatible grades] Alphard (G/X), Vellfire (V/X), standard bumper

Model: DBA-ANH20W / DBA-ANH25W
DBA-GGH20W / DBA-GGH25W

Grade: Grade: G/V/X standard bumper

[Stainless steel [type-1] (all stainless steel type)]
All side plates, cross members, etc. are SUS304 stainless steel type.
A top-of-the-line model with features, styling, and materials that are unique to Tight Hitch.

■Traction force: C (750kg or less)
■Estimated installation time: 5.0

【set content】
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.
・Delivery to Okinawa Prefecture will be delivered 7-10 days after shipping as it will be shipped by sea.

10 Series Alphard TOYOTA

■ Compatible Models
TA-MNH10W / TA-MNH15W
UA-ANH10W / UA-ANH15W
DBA-ANH10W

■ Compatible grades: AS/MS

■Towing capacity: 750kg
■Mount: Slant type ■Hitch ball: Short ball *Drilled hole in one place (bottom of right frame)
*Compatible with 50mm square mounts

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plates are made of SUS304 stainless steel.
This is a stylish and affordable hitch member with the main visible cross member made from stainless steel.

[Set contents]
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that depending on the material and type, items may be made to order, so cancellations or changes cannot be made after placing an order.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
Generally, items are shipped directly from the manufacturer.
-Delivery to Okinawa Prefecture will be by sea and will take 7-10 days after shipping.

10 Series Alphard TOYOTA

■ Compatible Models
TA-MNH10W / TA-MNH15W
UA-ANH10W / UA-ANH15W
DBA-ANH10W

■ Compatible grades: AS/MS

■Towing capacity: 750kg
■Mount: Slant type ■Hitch ball: Short ball *Drilled hole in one place (bottom of right frame)
*Compatible with 50mm square mounts

[Steel (steel type)]
Basic type of tight hitch.

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that since this is a made-to-order product, cancellations and changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

[Shipping Information]
Due to the shape of the product, it cannot be packaged together with other products.
Generally, items are shipped directly from the manufacturer.

Hiace 100 series

[Compatible car model]
KH-KZH116G / KH-KZH100G
GF-RZH101G / E-RZH100G

[First year registration] H4.5 - H16.8

*Just Low cannot be installed.
*Wagon cars have welding
*Super long processing required

[Traction force] C (750kg or less)
[Estimated installation time] Approximately 3 hours
●Bolt-on installation

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plate are SUS304 stainless steel type.
A stylish and reasonably priced hitch member whose main visible cross member is made of stainless steel.

【set content】
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●As this product is completely made to order, cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.

[About delivery to Okinawa and remote islands]
1.Due to shipping, it will be delivered 7-10 days after shipping.

■Quantity: 1 piece
■Seal inner diameter: 31mm
25φ, 28φ: For light vehicles

[Compatible] For SEA-DOO SPARK
*Equivalent to OEM part number: 278002843

A lanyard that attaches to your vest
It is more reasonable than genuine parts.

This is the most common all-purpose anchor for pleasure boats.
The surface is galvanized (dissolved galvanized) to protect the iron from rust, making it highly durable and weather resistant.

[Product specifications]
■Suitable areas for use: Effective on bottom sediments such as sand, mud, and sludge, and is especially effective on sandy areas.
■Recommended boat size: 8-12m (30-40f)

■Material: Iron + melt galvanized processing
■Anchor rope guide (mm): 14-16mm

[Contents] 946ml
●Brightener (product number: 32092): Brightener adds moisture and shine to wood. If there is dirt on the work surface, remove the dirt with a cheek cleaner, then rub in this agent with a sponge or brush. Leave it on for about 5 minutes, then rinse it off with water and you're done.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

[Contents] 946ml

●Cleaner (product number: 32251): The cleaner removes dirt such as oil from wood, fish blood, and dullness. After applying this agent, please rub it lightly with a brush. Leave it on for about 15 minutes and then wash it off with water.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

●Not only can it be used to defog glass windows, but it can also be used as a pinpoint heater for your hands and face.

●A louver is attached to the air outlet, allowing you to adjust the direction of the airflow from left to right, and the main unit can be rotated 180 degrees vertically.

●With cigarette lighter plug (cord length: approx. 1m)

●Size: Width approx. 195x Height approx. 100x Depth approx. 70mm

●DC 12V only/output 120W

●Air volume and temperature are about the same level as warm air (weak) from a portable hair dryer.

*[Note] ON/OFF switch is not included. Turn on/off by inserting and removing the plug.

[Compatible car model] E24 series S61.9 to H13.3 *Super long wagon cannot be installed

[LIMITED2 (stainless steel)]
Stylish stainless steel model. Uses [SUS304] with excellent corrosion resistance and strength.

【set content】
Cross member frame / Ball mount / Hitch ball 2 inch Φ / 7-pole sleep outlet (female) / Outlet plate / 6-core cord (wiring 1.5m) / Quick disconnect pin / Double clip / Hitch ball cover / Mounting bracket / Mounting bolt Type / tie wrap *Set contents and shape vary depending on the car model.

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax the vehicle inspection certificate to confirm compatibility.

If you have any questions, please feel free to contact us.
Please check compatibility before ordering.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa Prefecture will be delivered 7-10 days after shipping as it will be shipped by sea.

Camry Granvia Wagon [Compatible model] V20W/21W/25W
[Compatible grade] Aero specifications not confirmed Sedan not confirmed [First year registration] H8.12 - H11.8

Mark II Qualis [Compatible car model] V20W/V21W/V25W
[First year registration] H9.4 - H14.1

[Traction force] C (up to 750kg)
[Estimated installation time] 2.5 hours Drilling in 2 locations

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

If you have any questions, please feel free to contact us.
Please check compatibility before ordering.

[Compatible car model]
D21 (H4.8~H8.12) Can only be installed on single cab (4WD), single cab (2WD) long, double cab (4WD wide body) *2WD and king cab other than the above are not confirmed

D22 (H9.1~H14.8) Can only be installed on single cab (4WD), double cab (4WD), king cab (4WD) *2WD and king cab other than the above are not confirmed

[Compatible car model]
D21 (H4.8~H8.12) Can only be installed on single cab (4WD), single cab (2WD) long, double cab (4WD wide body) *2WD and king cab other than the above are not confirmed

D22 (H9.1~H14.8) Can only be installed on single cab (4WD), double cab (4WD), king cab (4WD) *2WD and king cab other than the above are not confirmed

[STANDARD (made of steel)]
Chic black finish.

【set content】
Cross member frame / Ball mount / Hitch ball 2 inch Φ / 7-pole sleep outlet (female) / Outlet plate / 6-conductor cord (wiring 1.5 m) / Quick disconnect pin / Double clip / Hitch ball cover / Mounting bracket / Mounting bolt Type / tie wrap *Set contents and shape vary depending on the car model.

[About the product]
●All hitch members are made to order. (Usually estimated delivery time is approximately 5 days to 2 weeks*) *Depends on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

Jumbo (4WD), air conditioner/power steering special (4WD/2WD)
[Compatible car model] EBD-S211P/EBD-S201P
[First year registration] H19.12 - H22.7

Jumbo, Standard [Compatible vehicle models] EBD-S500P (2WD)/EBD-S510P (4WD)
[First year registration] H26.12~

[STANDARD (made of steel)]
Chic black finish.

[Traction force] A (less than 500kg)
[Estimated installation time] Approximately 3.5 hours

【set content】
Cross member frame / Ball mount / Hitch ball 2 inch Φ / 7-pole sleep outlet (female) / Outlet plate / 6-core cord (wiring 1.5 m) / Quick disconnect pin / Double clip / Hitch ball cover / Mounting bracket / Mounting bolt Type / tie wrap *Set contents and shape vary depending on the car model.

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped by the shipping company's office *Delivery to corporations/companies and limited delivery to some private homes We cannot accept the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] SUBARU
[Car model] Forester
[Compatible car model] CBA-SH5, DBA-SH5
[Year] H19.12 - H24.10
[Compatible grades] 2.0XT (including Platinum Selection and Platinum Leather Selection), Sports Limited (4WD), 2.0X [Supplement] DBA-SH5 (20XS) has not been confirmed to be installed.

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] B
[Shape] F-2
[Processing] T-4/D-3
[Drilling]-
[Wearing time] 2 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax the vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] MAZDA
[Car model] CX-8
[Compatible car models] 6BA-KG5P, 5BA-KG5P, 3DA-KG2P
[Year] H29.12~
[Compatible grades] 25S, 25T, XD (including each PROACTIVE/L package) [Supplement] Genuine OP rear under garnish cannot be installed at the same time

[Type] LTDⅡ
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] LTDⅡ
[Processing] D-1/T-2
[Drilling]-
[Wearing time] 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] MAZDA
[Car model] CX-3
[Compatible car model] LDA-DK5FW/DK5AW
[Year] H27.2-H29.6
[Compatible grade] XD

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
[Processing] D-3
[Drilling]-
[Wearing time] 2 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] MAZDA
[Car model] CX-5
[Compatible car models] LDA-KE2AW, LDA-KE2FW DBA-KEEAW, DBA-KEEFW
[Year] H24.2-H29.2
[Compatible grade] 20S, XD

[Type] LTDⅡ
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] LTDⅡ
【processing】-
[Drilling]-
[Wearing time] 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

Dedicated harness
Compatible car model: LDA-KE2AW, DBA-KEEAW/DBA-KEEFW Compatible grade: 20S, XD
First year registration: H24.2 - H26.12
Traction force: C (750kg or less)
Estimated installation time: 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
-Basically, this item is shipped directly from the manufacturer, so cash on delivery is not possible.
・Delivery to Okinawa Prefecture will be delivered 7-10 days after shipping as it will be shipped by sea.

Compatible car model: LDA-KE2AW, DBA-KEEAW/DBA-KEEFW Compatible grade: 20S, XD
First year registration: H24.2 - H26.12
Traction force: C (750kg or less)
Estimated installation time: 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
-Basically, this item is shipped directly from the manufacturer, so cash on delivery is not possible.
・Delivery to Okinawa Prefecture will be delivered 7-10 days after shipping as it will be shipped by sea.

[Manufacturer] MAZDA
[Car model] CX-5
[Compatible car models] LDA-KE2AW, LDA-KE2FW DBA-KEEAW, DBA-KEEFW
[Year] H24.2-H29.2
[Compatible grade] 20S, XD

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
【processing】-
[Drilling]-
[Wearing time] 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

Compatible car model: LDA-KE2AW, DBA-KEEAW/DBA-KEEFW Compatible grade: 20S, XD
First year registration: H24.2 - H26.12
Traction force: C (750kg or less)
Estimated installation time: 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
-Basically, this item is shipped directly from the manufacturer, so cash on delivery is not possible.
・Delivery to Okinawa Prefecture will be delivered 7-10 days after shipping as it will be shipped by sea.

Compatible car model: LDA-KE2AW, DBA-KEEAW/DBA-KEEFW Compatible grade: 20S, XD
First year registration: H24.2 - H26.12
Traction force: C (750kg or less)
Estimated installation time: 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
-Basically, this item is shipped directly from the manufacturer, so cash on delivery is not possible.
・Delivery to Okinawa Prefecture will be delivered 7-10 days after shipping as it will be shipped by sea.

[Manufacturer] MITSUBISHI
[Car model] Delica D: 5
[Compatible car model] 3DA-CV1W
[Year] H31.2~
[Compatible grades] P, G, M, G-PowerPackage [Supplement] Guard bar can be removed and removed. URBAN GEAR unconfirmed

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
[Processing] T-3/4
[Drilling]-
[Wearing time] 2.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] HONDA
[Car model] N-VAN
[Compatible car model] HBD-JJ1
[Year] R1.7~
[Compatible grade] +STYLE FUN/Turbo Honda SENSING [Supplement] 2WD only

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] B
[Shape] F-1
【processing】-
[Drilling] 4
[Wearing time] 3 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] HONDA
[Car model] Acty
[Compatible car model] HA6/7/9
[Year] H12.12~
[Compatible grade] SDX [Supplement] Muffler and air cleaner can be removed and removed

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] A
[Shape] F-1
【processing】-
[Drilling] 4
[Wearing time] 2 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] HONDA
[Car model] MDX
[Compatible car model] UA-YD1
[Year] H15.3-H18.7
[Compatible grade] Exclusive

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-2
[Processing] T-4/D-3
[Drilling]-
[Wearing time] 2 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4. If it is determined that there is a risk of intrusion into the delivery truck.
5.If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] HONDA
[Car model] Odyssey
[Compatible car model] RC1 (2WD)
[Year] H25.11 - H29.11
[Compatible grade] ABSOLUTE

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
[Processing] D-3
[Drilling] 4
[Wearing time] 3 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] HONDA
[Car model] Odyssey
[Compatible car model] RB1/2
[Year] H15.10-H20.9
[Compatible grades] S, M, L, ABSOLUTE

[Type] STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] F-1
[Processing] D-1/K-1
[Drilling] 10
[Wearing time] 4 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.

[Manufacturer] NISSAN
[Car model] NV200
[Compatible car model] CBF-VNM20
[Year] H30.1~
[Compatible grade] GX [Supplement] 4WD only

[Type] LTDⅡ
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

[Traction force] C
[Shape] LTDⅡ
[Processing] D-1/3
[Drilling] 2
[Wearing time] 3.5 hours

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Depends on the vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax the vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, cash on delivery payment is not possible as the product is shipped directly from the manufacturer.

*Shipping cannot be stopped at the shipping company's office *Delivery to corporations/companies and limited to some private residences We cannot accept deliveries in the following cases.
1.A room in an apartment complex
2. Religious corporations, shrines, and temples
3.If it cannot be determined that the building is a corporate building
4.If it is determined that there is a risk of intrusion into the delivery truck.
5. If it is determined that delivery will be hindered due to other special circumstances.