Collection: Best selling products

■Material: Nylon
■Size (cleat part)
Total length 177 x stop hole ~ stop hole 44 x height 32 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 142 x stop hole ~ stop hole 35 x height 28 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 107 x stop hole ~ stop hole 27 x height 20 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 80 x stop hole ~ stop hole 21 x height 15 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 210 x stop hole ~ stop hole 53 x height 40mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 177 x stop hole ~ stop hole 44 x height 32 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 142 x stop hole ~ stop hole 35 x height 28 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 107 x stop hole ~ stop hole 27 x height 20 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■Material: Nylon
■Size (cleat part)
Total length 80 x stop hole ~ stop hole 21 x height 15 mm

●A two-point cleat made of nylon.
●Reduces damage to the hull when strong force is applied.
●Ideal for small boats, car top boats, kayaks, etc.

■A bolt-on type power holder that is even easier to handle with a small, lightweight, and compact clamp head.

■It is a bolt-on type equipped with the new CH50G in the clamp part.

■Comes with 4 sizes of clamp head (SS, S, M, L).

■A bright red color that looks great on the boat.

When installed, the top surface becomes horizontal, so this handle can also be used as a step.
Made of 316 stainless steel material, which is highly durable and resistant to corrosion.
Fix it to the transom etc. with screws etc.

[Product specifications]
■Material: Stainless steel (SUS 316)
-Size: Width 170 x Height 30 x Depth 50mm

[Contents] 946ml
●Brightener (product number: 32092): Brightener adds moisture and shine to wood. If there is dirt on the work surface, remove the dirt with a cheek cleaner, then rub in this agent with a sponge or brush. Leave it on for about 5 minutes, then rinse it off with water and you're done.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

[Contents] 946ml

●Cleaner (product number: 32251): The cleaner removes dirt such as oil from wood, fish blood, and dullness. After applying this agent, please rub it lightly with a brush. Leave it on for about 15 minutes and then wash it off with water.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

By replacing the hose,
An air pump with excellent cost performance that can be used for both intake and exhaust.
When using on towing tubes, please use a foot pump or hand pump for finishing.
★3 types of adapters are standard equipment

■Voltage/Current 12V/11.8Amp
■Cigarette lighter plug specifications
■Continuous use time approximately 13 minutes
■Air flow rate 290L/min
■Pressure: 0.7psi
■Accessories: 3 types of adapters

[Contents] 3.79L

●A biodegradable and environmentally friendly bilge cleaner. Decomposes oil, grease, gasoline, diesel oil and sludge. The recommended usage is 0.95L for a 25-foot boat.

●If the bilge is dry, pour fresh water into the bilge, let it sit for about an hour, then run the boat before draining. Cleans and refreshes the smell of bilges such as engine rooms.

[Contents] 0.95L

●A biodegradable and environmentally friendly bilge cleaner. Decomposes oil, grease, gasoline, diesel oil and sludge. The recommended usage is 0.95L for a 25-foot boat.

●If the bilge is dry, pour fresh water into the bilge, let it sit for about an hour, then run the boat before draining. Cleans and refreshes the smell of bilges such as engine rooms.

You can obtain the same strength as simple processing without the troublesome braiding of the end of the rope.
Made of 316 stainless steel material that is resistant to corrosion.

■Quantity: 1 piece
■Material: Stainless steel (SUS 316)
■Please refer to the image for size details.

●Suitable for both spinning and casting reels.
●A rod holder that allows you to set the top and bottom angles in one shot using the side lever.
●The main body and pedestal can be attached and detached with one touch.
●The mounting mount has two outlets at 90 degree angles, so one mount can be mounted on either horizontal or vertical surfaces.

[Product specifications]
■Material: Made of resin
■Holder part: Inner diameter 34mm x total length approx. 210mm
■Pedestal: 64mm x 115mm

[Contents] 473ml

●The concentrate of this product contains 100% of the world's purest oils, including tung oil, which restores and protects the surface of teak to its natural finish color. It penetrates deeply and surrounds the wood fibers, preventing moisture and other components from entering that would damage the wood of teak.

■It is a rail attachment for boat power holder haste.

■It is very convenient if you install it in your favorite place.

■Used when installing a boat power holder on a 19-32Ф rail.

■Boat base attachment for boat power holder haste.

■It is very convenient if you install it in your favorite place.

■Dimensions: 60 x 101 x thickness 22mm

■Material: SUS316

*Mounting bolts are not included

●JCI certified product ●Type approved product

●Assembly type, hanging type

●This is a radar reflector that complies with the new standards that came into effect on October 1, 2010.

[Product specifications]
■Material: High-density polyethylene + heat-welded salt damage protection aluminum foil

■Size:
Circular: 245mm
Total length: 370mm
Weight: approx. 300g

●Using various attachments, it can be used with various antennas.

●The angle can be adjusted freely, and installation is easy as long as you have a rail such as FB or side rail.

●For 25Ф pipe

●Made of stainless steel

●Using various attachments, it can be used with various antennas.

●The angle can be adjusted freely, and installation is easy as long as you have a rail such as FB or side rail.

●For 1" x 14 screw threads

●Made of stainless steel

●The base body can be easily installed by simply clamping it onto a pipe from 19φ to 32φ.

●The antenna can be easily brought down and fixed with one-touch operation of the lever, so the antenna will not damage the boat.

●For 25Ф pipe

●Made of stainless steel

●The base body can be easily installed by simply clamping it onto a pipe from 19φ to 32φ.

●The antenna can be easily brought down and fixed with one-touch operation of the lever, so the antenna will not damage the boat.

●For 1" x 14 screw threads

●Made of stainless steel

●The antenna can be easily brought down and fixed with one-touch operation of the lever, so the antenna will not damage the boat.

●Can be installed on either flat or side surfaces.

●For 1" x 14 screw threads

●Made of stainless steel

●A very convenient fixture that allows you to easily secure the rope with one hand.

●You can easily fix the rope by simply passing the rope through it alternately without tying it.

●It can be used in a variety of ways, such as hanging fenders, mooring ships, loading platforms for pickups, and trailers.

●Once fixed, the rope will not come off even if strong tension is applied.

●When removing it, you can easily remove it by removing the ropes passed through it alternately.

●Can be used with ropes up to 12mm in diameter.

●Body dimensions: 82mmx40mm
●Made of stainless steel

■Can be installed on rails from 19 to 32Ф, and the angle can be adjusted with one touch.

■Made of stainless steel

■Cap (rubber) inner diameter: 40.4Ф・Length: 250mm

■Can be installed on rails from 19 to 32Ф.

■Made of stainless steel

■Cap (rubber) inner diameter: 40.4Ф・Length: 250mm

■A best-selling, sturdy and easy-to-use rod holder that can also be used for outrigger fishing.

■It can be easily installed on the deck with 4 screws, so there is no need to worry about water getting into the boat.

■The angle and direction can be adjusted with the knob.

■Made of stainless steel

■Mounting base: 70×120mm・Pipe inner diameter: 40.4φ

[Product size]
■Total length (A): 159.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 127.0mm
*Accessories: End cap

● Gently secure the handle and tip of the rod with foam.

●The soft foam protects the rod from vibrations from the boat and prevents damage to the rod.

●Fix using the hole on the side of the plastic frame.

●Length 345x Height 65x Depth 33mm Can fix rods up to 37mm in thickness.

●Set of 1 each of fixed holder and fall-prevention rotating holder

[Product specifications]
■Size: Length 860 x Width 270mm
■Dial diameter: 350mm
■Terminal installation inner diameter: 19mm

■Applicable: For small batteries
■Can be used up to 800 amperes.

This is an ON/OFF switch attached to the battery terminal (negative side).
You can turn the power on/off by tightening or loosening the green knob that comes with the terminal.

■Roller diameter (A): 75.6mm
■Width (B): 127.0mm
■Shaft diameter (C): 16.0mm

[Contents] 946ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] For fabrics such as awnings and convertible roof fabrics (sun protection, water repellency, etc.)

●A strong film is formed on the surface of the fabric, providing waterproof effects and preventing deterioration such as fading due to UV rays.
Continuous use will maintain the original color of the fabric over many years and prevent the growth of mold.

●Sun protection, water repellency, stain resistance, and mold prevention agent for fabrics (acrylic, Dacron, olefin, cotton, etc.).
●Awnings, convertible roof fabrics, curtains, outdoor wear, Gore-Tex products,
Valid for tents, umbrellas, backpacks, rucksacks, canvas shoes, etc.

【please note】
Cannot be used on vinyl, plastic, rubber, synthetic leather, or FRP.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

●It is even safer to hang a wire chain to prevent theft when storing the trailer.
●Hitch ball diameter: Compatible with 1 7/8", 2", 2 5/16".
●Equipped with a slide cover that protects the keyhole from dust.

【please note】
It may not be possible to use the trailer coupler with a ball shape that is different from the listed product. Thank you for your understanding.

[Product specifications]
■Flange dimensions: 350 x 604mm
■Drilling dimensions: 269 x 517mm
■Opening dimensions: 248 x 495mm
■Opening angle: Approximately 100 degrees

●This is a hatch that is ideal for installing on the lid of an Ikesu.
●A seal is installed between the lid and flange to prevent water from entering.

[Product specifications]
■Flange dimensions: 328 x 402mm
■Drilling dimensions: 245 x 312mm
■Opening dimensions: 216 x 290mm
■Opening angle: Approximately 100 degrees

●This is a hatch that is ideal for installing on the lid of an Ikesu.
●A seal is installed between the lid and flange to prevent water from entering.

[Product specifications]
■Flange dimensions: 280 x 381mm
■Drilling dimensions: 200×298mm
■Opening dimensions: 180×280mm
■Opening angle: Approximately 100 degrees

●This is a hatch that is ideal for installing on the lid of an Ikesu.
●A seal is installed between the lid and flange to prevent water from entering.

■This is a hose side fitting attached to the fuel tank side fitting.

*Please use with tank fitting (product number: 30018) sold separately.

■Compatibility: TOHATSU outboard motor 2-stroke 3/8” hose

■Fix to a hose with an inner diameter of 9.5mm using a clamp sold separately.

■Can be installed and removed with one touch on the tank side fitting.

■It is a fitting that is attached to the fuel tank.

*Please use with hose fitting (product number: 30019) sold separately.

■Compatibility: TOHATSU outboard motor 2-stroke 1/4”NPT

■Tank part screw size: 1/4 inch outer diameter 12.5mm

【Product details】
■Quantity: 2 pieces 1 set
■Material: Plastic
■Compatible with: Circular items with a diameter of 19mm (within +-3mm)

A convenient clip for storing cylindrical objects such as tiller extensions, boat hooks, and rods.

●Stylish aluminum rod holder.

●Made by TACO, which has a reputation for its beautiful finish and sturdy construction.

●For light tackle such as spinning.

●Material: Aluminum

●Size: Width 295mmx Height 220mm

●Holder part inner diameter: 37φmm

*Screws for attaching the main unit are not included.

[Product specifications]
■Material: Nylon
■Size (when unfolded)
Height: approx. 162cm (rope tip to bottom of step)

●A simple ladder that can be secured by hooking a nylon rope onto a cleat.
●The width of the step is approximately 29cm, and the surface is engraved with a non-slip pattern.
●Can be stored compactly when not in use.

●This is a bilge pump made by ATTWOOD and has the feature of easy maintenance.

●During operation, water always flows around the motor and drains. This keeps the motor constantly cooled and increases its durability.

●This pump is designed to suppress the heat generated by the motor.

●The main body can be fixed by simply pushing it into the base filter, and can be easily removed while pressing the push button. Convenient for cleaning filters in narrow spaces.

●The motor is a cartridge type and can be easily removed by simply twisting the top, making it convenient for cleaning and other maintenance.

●Since the included cord is long (90 cm), there is no need to add parts that are easily corroded by soaking in water, reducing trouble.

●Power source: DC 12v, current: 3.5A, maximum pumping capacity: height 3.3m, lifting capacity: 75L (0m/min)

●Size: Base diameter 84φx Overall height 111x Discharge port diameter 28φmm

*[Note] Be sure to insert a 5A fuse (sold separately) between the pump and the power supply.