Collection: Best selling products

【correspondence】
YAMAHA

Magic wristband type tether cord with whistle attached.
The tether cord alone will sink in water,
When combined with the strong buoyancy of the lanyard wristband, it stays afloat even if you fall into the water.

[Band color] x [Lanyard color]
A8130PFW Black x Black
A8123PFW Black x Red
A8129PFW Black x Blue
A8134PFW Black x Silver

Ship Inspection Can also be used for ship inspection.
Great for replacing life vests that don't come with a whistle or when they deteriorate!

【correspondence】
KAWASAKI

It is very convenient because it floats even if dropped in water.
Please use according to your wrist size.

[Float color] x [Lanyard color]
A2126 Black x Silver
A2148 Red x Black
A2151 Blue x Silver
A2149 Green x Black

【correspondence】
KAWASAKI

This is a Velcro type wristband lanyard.
The tether cord has a whistle attached.

[Band color] x [Lanyard color]
A2109PFW Black x Black
A2103PFW Black x Red
A2107PFW Black x Blue
A2101PFW Black x Green

19-1600: SBN38mm
19-1601: SBN44mm

A set of replacement butterfly and shaft.

[Applicable] Mikuni carburetor YAMAHA GP1200R/XLT1200/XL-L

You can easily adjust the screw by replacing it.
Easily change carburetor settings.

When used by attaching it to a stabilizer, it improves straight-line performance,
Make control safer and easier.

■Quantity: 1 set of 2 pieces of the same color
■Compatible with: Hydrofoil stabilizer exclusive product
→Large type: Compatible with product number 04824 / 21971
→Small type: Compatible with product number 04826 / 21972

[Effect]
●The water flow flowing on the surface dynamically creates upward thrust pressure on the bottom surface of the stabilizer, pushing up the stern and pushing down the bow, shortening the time until planing, increasing propeller efficiency, and improving fuel efficiency!
●The water flow created by the propeller is efficiently pushed backwards, improving controllability and straightness.

●The time until planing is halved, making running and control smoother. It also saves fuel consumption by 10-40%.

[Installation method]
1■ Place the stabilizer on the cavitation plate and mark the 4 places to drill holes.
*At that time, after drilling a hole with a diameter of 6 mm, make sure that there is a gap of at least 1 cm between the edge of the cavitation plate and the edges of all four holes.
*If there is no gap of 1cm or more, the cavitation plate cannot be installed as there is a possibility that it will be damaged while driving.

2■ Use a drill to drill holes with a diameter of 6 mm in four locations, and then pass the included bolts from under the cavitation plate.
*From the bottom, temporarily tighten the 4 places by inserting the bolts → cavitation plate → rubber washer → stabilizer → washer → nut.

3■ Perform the final tightening, but instead of final tightening one location at a time, do it diagonally a little at a time, ``evenly in four locations in an X-shaped order.''
4■ Since a locking nut is used, there is no need to tighten the bolts until the stabilizer is deformed.
5■ Move the stabilizer and check that if there is no play, the installation is complete.

【lastly】
Do a test drive and check again to make sure there is no play between the stabilizer and cavitation plate.

[Product specifications]
■Type: Large
■Color: Black / Gray
■Size: Please check the image.
■Correspondence
→Large: 40 to 300 horsepower outboard motor, inboard/outboard motor

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Applications: 4 types of front lights, 2 types of rear lights, 2 types of bicolor lights, 2 types of white lights
01458: 12V10W
01459: 24V10W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 10W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Application: 01457 → front light three types of light, 01468 & 01469 → red light
01457: 24V20W
01468: 12V30W
01469: 24V30W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 20W & 30W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

A spare/replacement bulb for navigation lights manufactured by Koito Seisakusho Co., Ltd.
JCI certified product Type approval number obtained

■Application: Application: Gendou, tricolor light
01456: 12V20W
26705: 24V20W

[Note] Please select the voltage and wattage before ordering.
●Voltage: 12V/24V
● Wattage: 10W/20W/30W
We have the above lineup. (This product is 20W)
Please select the appropriate product according to your application.

Manufactured by Koito Seisakusho Co., Ltd.

[Product specifications]
■Type: Recessed type
■Material: Stainless steel
■Total length: 220mm
■Holder inner diameter: 41mm
[Contents] 5-piece set: rod holder, rubber, stop bolt, intermediate pedestal, and pedestal.
...
■With base gasket integrated rubber cap

This is a stainless steel rod holder made by Atwood.
Comes with a UV-resistant cap to prevent water from entering.

Made by ATTWOOD

[Product specifications]
■Material:
■Size: Diameter/Length/Eye diameter
G-1: 89mm /330mm / 9mm
G-2: 114mm /406mm / 12mm
G-3: 140mm /508mm / 12mm
G-4: 165mm /584mm /19mm
G-5: 216mm /678mm /19mm
G-6: 257mm /762mm /22mm

●Highly weather resistant standard model that protects your boat from scratches ●Polyform's air fender, G series fender.
●Standard bale-shaped design that perfectly matches any ship.

【please note】
*Since it is a sealed type, it will be delivered with air injected.
*Please note that additional air injection is not possible.
POLYFORM Manufactured by POLYFORM

[Product specifications]
■Material: Made of reinforced vinyl
■Diameter: Approximately 20cm

●Multi-use float that can be used as a marker buoy or fender.
●This buoy is ideal for setting up courses for water skiing, wakeboarding, personal watercraft, etc.
●Made of marine grade reinforced vinyl, the same as commonly used air fenders,
It is less susceptible to deterioration due to UV rays.

●Three fluorescent colors that are highly visible even on water.
●It is a product that does not easily fade even after long-term use.

【please note】
Air injection nozzle is not included.
*Please purchase the air injection nozzle (product number: 97560) separately.

[Product specifications]
■New standard compliant model/TYPE: A
■Applicable weight: 40kg or more. For both pediatric and pediatric use
■Initial buoyancy: 7.5kg
■ Waist circumference: up to 105cm
■Material: (Body) Polyester, (Buoyancy material) Oil-resistant foamed polyethylene

This is a fixed type life jacket that provides absolute security.
Since it is worn like a vest, it won't come off easily in the event you fall into the water.
The front side is a zipper type.

By replacing the hose,
This is an air pump with excellent cost performance that can be used for both intake and exhaust.
■3 types of adapters are standard equipment

When using on towing tubes, please use a foot pump or hand pump for finishing.

1. 24758: DC12V (Cigarette lighter plug)
■Voltage/Current DC12V/12A
■Air flow rate 280 liters/min
■Maximum pressure 0.05kg/cm2
■Continuous use time approximately 12 minutes

2. 24759: AC100V (outlet plug)
■Voltage/Current AC100V/1.8A
■Air flow rate 300 liters/min
■Maximum pressure 0.06kg/cm2-
■Continuous use time approximately 12 minutes

●10 pieces

●Hose outer diameter:

16mm…for 5/16

18mm…for 3/8

24mm…For primer pump

[Product specifications]
■Size: Diameter / Total length / Hole diameter
HTM-1: 152mm /381mm /16mm
HTM-2: 203mm /508mm /16mm
HTM-3: 254mm /660mm /16mm

●Polyform's air fender, HTM fender.
●Type with a through hole in the center for the rope to pass through. You can hang the fender with a single rope, which is very convenient when installing it horizontally.
●You can also hang it vertically by making a knot after passing the rope through it.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97561) sold separately.

POLYFORM Manufactured by Polyform

A jacket with a simple and universal design that uses a polyester body liner as the outer material.
The body also has a texture similar to a thin down jacket.

This item shows JETPILOT's attention to detail in detail, such as the left and right front welt pockets with zips and the contrasting design of the hoodie straps.

Although it is simple, it is a useful item as the main outerwear for styling.

■Actual size when laid flat (chest measurement/length)

M size: 120cm/62cm
L size: 125cm/64cm
XL size: 129cm: 67cm

*Please forgive any errors as the measurements are taken by our staff.

This is Annieversary model apparel with the original logo revived.
The brushed lining makes it a little looser, and the fabric isn't too thick, so it's perfect from fall to spring!
Round neck trainers with a simple design are popular among people of all ages.

■Poly/cotton outer body 320gsm fleece brushed lining type

■Actual product size (chest measurement/length)

S: 95cm/70cm
M:100cm/72cm
L:106cm/74cm
XL:116cm/77cm

*Please note that there may be errors due to measurements taken by our staff when placed horizontally.

*American size, one size larger than Japanese size.

[As this is a special price item, we cannot accept returns or exchanges. ]

This is a support collaboration model with the Kawasaki logo.
The lining is satin quilted, giving it a heavy texture similar to that of a jacket.

■Material: Cotton

■Actual product chest measurement S: 100cm
M: 110cm
L: 120cm
*Please allow slight errors due to the actual size measured by our staff when placed horizontally.

[As this is a special price item, we cannot accept returns or exchanges. ]

These board shorts have a cool gradation line.
Due to the central waist strap design, only minor adjustments are required.
There is a zip pocket on the side

■Material: Stretch polyester

■Waist size
30 inches (80cm)
32 inches (85cm)
34 inches (90cm)
36 inches (95cm)
38 inches (100cm)

Board shorts surf pants saltwater pants beach swimming pool resort
Watercraft Wakeboard Surfing Flyboard
Kitesurfing Famous Brand Popular JET-PILOT America
Outdoor Marine Activities SURF WAKEBOARD SUP Paddle Board
Kayaking Canoeing Trekking River play Jet skiing

■Material: 92% polyester, 8% spandex
■Specifications: 1 right leg pocket

■Jetpilot recommended waist size: 28 inches (74-78 cm)
30 inches (78-82 cm)
32 inches (82-86 cm)
34 inches (84-88 cm)
36 inches (86-90cm)
38 inches (88-92 cm)
*Please note that the appropriate size may vary depending on the waist design.

■ Actual size of the product laid flat
28 inch: Waist 76cm Total length 49cm Inseam 24cm
30 inch: Waist 80cm Total length 50cm Inseam 25cm
32 inch: Waist 84cm Total length 51cm Inseam 25cm
34 inch: Waist 90cm Total length 52cm Inseam 25cm
36 inch: Waist 94cm Total length 54cm Inseam 26cm
38 inch: Waist 100cm Total length 55cm Inseam 26cm
*Please note that there may be some errors due to measurements taken by our staff.

Board shorts, surf shorts, swimming trunks, pool, resort, jet ski
Wakeboard Surfing Flyboard Kitesurfing Famous brand Popular JET-PILOT America Outdoor Marine activities SURF WAKEBOARD SUP
Paddle board kayak Canoe Trekking River activities Jet ski Fishing Boat

free size

100% cotton is extremely comfortable to wear.

■Material: Cotton

■Product size
M: Chest measurement 100cm/total length 70cm
L: Chest measurement 109cm/total length 72cm

*Please note that there may be errors due to measurements taken by our staff when placed horizontally.
*American size is one size larger than Japanese size.

The silhouette is quick-drying but doesn't have a snug fit.
It has evolved into a wear that can be used in outdoor scenes such as pools and fields.
Women's tops for UV care.
Colors that look great on the beach make it fun to coordinate with swimwear.

[Material] 100% polyester
[Applicable chest measurement]
10(M):85cm
12(L):90cm

free size

This is a jacket from the "VAULT" series with a black body and a hologram-like rainbow logo.
We recommend pairing it with the long johns (JA22154V) and long pants (JA22157V) sold in the series as a set-up suit.

Made of ``embossed neoprene,'' a stress-free material with excellent elasticity, it provides the highest level of comfort and comfortable PWC riding.

■Applicable image size (height, weight, chest measurement, waist)
M: 170-175cm, 65-72kg, 95-100cm, 76-81cm
L: 175-180cm, 70-77kg, 100-105cm, 81-86cm
XL: 180-185cm, 77-85kg, 105-110cm, 84-88cm

A sports vest perfect for wakeboarding, SUP, etc.

・100% 360° Flex-Lite Ultra neoprene material with the highest elasticity ・Glideskin armhole jet seal for smooth arm and shoulder movement ・License holder on the inside ・Anatomical fit for an excellent fit ・Zipper for hard riding Durable YKK lock zipper so you don't have to worry about it opening - The buckle at the bottom prevents it from shifting against your body.

■Applicable chest size M: 85 -90cm
L: 90-95cm
XL: 95-100cm

*This vest is not certified by JCI small special vessel inspection.
Can be used for wakeboarding, SUP, flyboarding, and snorkeling.
For other sports, please choose a vest that follows the rules.

Protection ★★☆☆☆
Motility ★★★★☆
Buoyancy ★★☆☆☆

A thin COMP type vest that emphasizes ease of movement and fit.

■Product Features Flexlight stretch panels provide the highest level of mobility and comfort Lightweight design for a comfortable fit

*JCI small special vessel inspection certification is not possible*

■Applicable chest circumference size (abdominal circumference actual outer size/actual inner size)
M: 85-90cm
L: 90-95cm
XL: 95-100cm

Wakeboarding Wakesurfing Kiteboarding Surfing Bodyboarding
SUP SUP Paddleboard Flyboard Snorkeling Trekking
Kayak Canoe Marine Sports Marine Activities Banana Boat
Windsurfing WAKEBOARD SURF WATERTOY Rubber boat ZUPBOARD
Sports vest Impact vest Neo vest Wet suit

360° stretch neoprene JETLITE foam is the lightest and most flexible foam. It has more air bubbles than conventional products, making it more flexible and movable, and is also lighter.

YKK lock zipper adopted

*This is a sports vest that can be used for wakeboarding, SUP, etc.
*JCI small special vessel inspection certification is not possible.

■Applicable waist circumference M:85-95cm
L:90-100cm
XL:95-105cm

Wakeboarding Wakesurfing Kiteboarding Surfing Bodyboarding
SUP SUP Paddleboard Flyboard Snorkeling Trekking
Kayak Canoe Marine Sports Marine Activities Banana Boat
Windsurfing WAKEBOARD SURF WATERTOY Rubber boat ZUPBOARD
Sports vest Impact vest Neo vest Wet suit

This is ZAHRA KELL's signature model.
Stretch neoprene accommodates every movement of the rider.
This neoprene vest is flexible and soft to the touch, making it the perfect piece for active scenes.
The liner is made of fire fur material, which is perfect for women as it provides excellent heat retention.
The front zipper makes it easy to put on and take off.
This is a top-quality vest that is lightweight and flexible.

■ Chest size guide

M(10):85-90cm
L(12):90-95cm

*JCI small special vessel inspection certification not available*

Wakeboarding, Wakesurfing, Kiteboarding, Surfing
Bodyboarding, SUP, Paddleboarding, Flyboarding, Snorkeling, Trekking, Kayaking, Canoeing, Marine Sports, Marine Activities, Banana Boat, Windsurfing, WAKEBOARD SURF WATERTOY
Rubber boat ZUPBOARD sports vest Impact vest Neo vest
Wetsuits

This is a multi-use waterproof backpack made by Dry Case in the United States.
3 Rolling system with extremely high performance, even in bad weather such as water spray, mud, sea breeze, rain and fog
It firmly protects the clothes and equipment you put inside.

In addition, we use environmentally friendly materials that are resistant to tears and sharpness.
Even if it gets dirty, you can easily remove it by wiping it with a wet cloth.

●Size: 69 x 40 x gusset 18cm (capacity 30L)

The size is large enough to hold bath towels, footwear, and other small items.

Stable shoulder straps and waist belt allow you to use both hands.
It also comes with a sturdy rubber strap, so you can hold it in your hand.
It also has plenty of storage specifications, including a zippered mesh pocket on the front and side pockets on the left and right.
It also provides full support for your back or lower back.

This cloth mask uses 100% cotton for the outer material and 100% quick-drying polyester fabric for the lining.
There is a pocket inside the main body that can be used to insert non-woven fabrics, gauze, etc.

●Masks do not completely prevent infection (virus invasion).
●Non-medical use, non-dust-proof/gas-proof use

【Product Specifications】
■Set of 2 ■Outer fabric: 100% cotton
■Lining fabric: 100% polyester
■Ear hook part: 100% cotton
■Size: L (Men's) W22cm x H15cm (mask part)
*This is the size listed in the catalog and may differ from the actual size.

Based on the impressions of our professional riders, we thoroughly analyzed the rider's movements and repeatedly tested the optimal cut pattern. This is the ideal wetsuit that effectively uses highly elastic materials. You will surely be able to experience the highest quality and high potential of UNLIMITED.
The side cuts give the body shape a clean look and also have an excellent design.

-UNLIMITED RUSH-
Aiming for higher performance, the design is focused on specifications that maximize the power, speed, and stability of PWCs, under the supervision of UNLIMITED's exclusive professional riders. The ultimate wear that allows riders to embody a smart look that is in line with the times.

【Features】
・Shoulder Velcro: The Velcro on the left shoulder of the long john allows for smooth putting on and taking off. ・Stabilizing pad: The pad on the knee area helps improve grip while riding. ・2.5mm flex neoprene: The new material is an evolution of the conventional fabric and has the highest level of texture and elasticity.
- Ink pad: Flexible and lightweight, with improved grip - Ankle zipper: Velcro tape with zipper for easy on and off to protect the slider

[Freely mix and match] Separately sold set-up product: EXPEDITION COAT - Marine coat - (product number UWC2240BK)
・RUSH WET JACKET (product number UWA2230BK)
・RUSH WET PANTS (Product number UWP2220)
Can be worn in combination with the above items.

Kawasaki 800SX-R normal (genuine) hood only

Decal kit for 800SX-R normal hood.

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

The colors are standard green and red. Please choose your favorite color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

Boat equipped with Kawasaki New SX-R transform hood (UL46100)

Decal kit for boats equipped with New SX-R Transform Hood (UL46100).

It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install. This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

The colors are standard green and red. Please choose your favorite color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

Transform hood custom boat [Product number: UL46100] Dedicated jet cover

*About TYPE-A (UL54001)…
Compatible only with the mount (UL35211) that comes with the transform hood.
(Due to the exclusive design, other types of mounts cannot be installed even with the company's mounts.)

Jointly designed by UNLIMITED x LABIOS!
High quality from domestic production, from fabric to sewing
To protect the body, the inner fabric uses long fiber non-woven fabric to protect the fibers.
[Material] Polyester material

[Special points]
1. Colored tape to make it easier to see the front when hanging the cover
2.The hood and handle part are made of double layered non-woven fabric to prevent chafing and strengthen the fabric.
3. Fasten the strap with one touch under the hull and securely secure it to the hull.
4. UNLIMITED brand mark made of silicone

[Disclaimer]
Colors of stitches, tape, etc. may vary depending on arrival time.

For ULNIMITED full billet sponsons (UL53200)

aluminum billet

Contents: 4 pieces

[Compatible models] KAWASAKI
ULTRA310LX/310R/310X SE/310X
260LX/260X
250X
LX

All components of X-Sponson are machined from aluminum, ensuring durability and functionality.
A complete sponson with overwhelming visuals.
With a uniquely designed wide fin and sponson base with an ideal angle,
Dramatically improves handling and straight-line stability.

It is possible to adjust the position in 12 ways to suit your preferred riding style.
Easy to install with bolt-on
Includes all bolt parts needed for installation.

[Applicable models] SEA-DOO 4-stroke model (excluding SPARK)

Install it on top of the genuine oil cap.
The clutch function that prevents the oil cap from being over-tightened remains the same.
The aluminum billet cap stands out as an accent in the engine room.

[Information] We also recommend using the company's billet oil filter cap (UL53001).