Collection: Best selling products

RX450h 20 series late model (Modellista) LEXUS MODELLISTA Lexus

Compatible models (October 2019 to November 2021)
DBA-AGL20W
DBA-AGL25W
DAA-GYL20W
DAA-GYL25W

■Towing capacity: 750kg
■Mount Slant Low UP
■ Hitch ball short ball

[Steel (steel type)]
Basic type of tight hitch.

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that since this is a made-to-order product, cancellations and changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

Toyota Hiace 200 Series Modellista
TOYOTA HI ACE 200 MODELLISTA
*4-inch/4.5-inch/5-inch/6-inch/7-inch

*Compatible models
KR-KDH 200V/205V/200K
ADF-KDH 201V/201K/206V/206K
LDF-KDH 201V/201K/206V/206K
QDF-KDH 201V/201K
QDF-GDH 201V/201K/206V/206K
CBF-TRH 200V/200K
3BF-TRH 200V/200K
GDF-KDH 201V
3DF-GDH 201V/201K/206V/206K

■Towing capacity: 750kg
■Mount: Slant type ■Hitch ball: Short ball ■For both diesel and gasoline vehicles *The mounting bolts at the rear of the vehicle are through bolts, increasing strength.
*The through bolts cannot be used if there are floor mats or other items inside the vehicle.
*If your vehicle is equipped with floor mats, please let us know before placing your order and we will change the nuts to those with stays and ship them to you.

[Steel (steel type)]
Basic type of tight hitch.

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that since this is a made-to-order product, cancellations and changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

Grand Cherokee (~H11)

[Compatible car models] E-ZG40, E-ZG52

[First year registration] January 1993 to May 1999

Traction force: C (750kg or less)
Estimated installation time: 3 hours

[Steel (steel type)]
Basic type with tight hitch.

【set content】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Car side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that this item is completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

Land Cruiser 70 Series 2023 Reprint
TOYOTA LANDCRUISER

Compatible model: 3DA-GDJ76W

■Towing capacity: 750kg
■Mount: Slant long type, downward facing ■Hitch ball: Short ball *Bolt-on installation

[Steel (steel type)]
Basic type of tight hitch.

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that since this is a made-to-order product, cancellations and changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

TOYOTA LANDCRUISER 250
・250 series Land Cruiser ・250 series Land Cruiser Modellista

■ Compatible model: 3DA-GDJ250W

■Towing force: 1,000kg
■Mount: Slant low, downward ■Hitch ball: Short ball *Bolt-on installation/no need to remove bumper

[Steel (steel type)]
Basic type of tight hitch.

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that since this is a made-to-order product, cancellations and changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

Land Cruiser 300 Series Wald Aero Toyota
TOYOTA LANDCRUISER 300 WALD AERO
[SPORTS LINE BLACK BISON EDITION]

Compatible models: 3BA-VJA300W

■Towing capacity: 750kg
■Mount: Slant low type ■Hitch ball: Long ball *Bolt-on installation

[Steel (steel type)]
Basic type of tight hitch.

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that since this is a made-to-order product, cancellations and changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

Land Cruiser 200 Series Modellista Late Model
TOYOTA LANDCRUISER MODELLISTA
Minor change H27.8 or later

Compatible Model
CBA-UZJ200W
CBA-URJ202W

■Towing capacity: 750kg
■Mount slant type ■Hitch ball short ball

[Steel (steel type)]
Basic type of tight hitch.

[Set contents]
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Wiring tap / High tension bolt for hitch installation

[About the product]
All hitch members are made to order. (Estimated delivery time is about 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that since this is a made-to-order product, cancellations and changes cannot be made after an order has been placed.
●For some vehicle models, we may ask you to fax us your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check the compatibility before placing your order. Please refrain from checking the compatibility after placing your order.
*The photo is an example, and the installation method and shape will vary depending on the vehicle model. Also, modifications to the towing vehicle may be required, so please contact us for details.
-As this is a made-to-order product, returns and exchanges are not possible.

This is an MX series top that can be worn loosely without showing your body lines.
By wearing a highly water-repellent top, there is no friction between the skin and the life jacket.
UPF50+ sunscreen protects your skin from UV rays

Actual measurements when laid flat (chest circumference/length)
M 100cm/75cm
L 108cm/80cm
XL 115cm/84cm
*Please note that these measurements were taken by our staff while the item was laid flat, so there may be some margin of error.

The MX pants from the JETPILOT VAULT series have been revamped and are now on sale.

Super lightweight and comfortable to wear
! You can coordinate the series with life jackets and rash guards.

JetLite™ Patented Lightweight Thermoregulating Material
Tailored with an ergonomic fit to ensure optimal comfort and functionality
Breathable inner gusset provides an ultra-lightweight feel
Webbing for added support and stability
Triple stitched construction.
Abrasion and heat resistant panels on the inside of the knees.
Covered zipper fly for added durability and functionality
Fade-resistant sublimated graphics

Easy to put on and take off, and easy to wash by hand.

*This is not wetsuit fabric.

Manufacturer recommended size

28 inch: Waist 80cm Hip 48.5cm Hem width 14.5cm Rise 32.5cm Inseam 71.5cm Thigh width 27cm Total length 99.5cm
30 inch: Waist 84cm Hip 51.5cm Hem width 14.5cm Rise 34cm Inseam 73cm Width 28cm Total length 100cm
32 inches: Waist 87cm Hip 56cm Hem width 15cm Rise 36cm Inseam 73cm Thigh width 30cm Total length 101.5cm
34 inches: Waist 94cm Hip 58cm Hem width 15cm Rise 37.5cm Inseam 74cm Thigh 32cm Total length 104.5cm
36: Waist 97cm Hip 61cm Hem width 16cm Rise 39cm Inseam 74.5cm Thigh width 32cm Total length 106cm

Swimming pool resort water bike water bike wakeboard surfing flyboard kitesurfing famous brand popular JET-PILOT USA Australia outdoor marine activity SURF WAKEBOARD SUP paddle board
Kayaking, canoeing, trekking, river activities, jet skiing, off-road biking

The MX pants from the JETPILOT VAULT series have been revamped and are now on sale.

Super lightweight and comfortable to wear
! You can coordinate the series with life jackets and rash guards.

JetLite™ Patented Lightweight Thermoregulating Material
Tailored with an ergonomic fit to ensure optimal comfort and functionality
Breathable inner gusset provides an ultra-lightweight feel
Webbing for added support and stability
Triple stitched construction.
Abrasion and heat resistant panels on the inside of the knees.
Covered zipper fly for added durability and functionality
Fade-resistant sublimated graphics

Easy to put on and take off, and easy to wash by hand.

*This is not wetsuit fabric.

Manufacturer recommended size

28 inch: Waist 80cm Hip 48.5cm Hem width 14.5cm Rise 32.5cm Inseam 71.5cm Thigh width 27cm Total length 99.5cm
30 inch: Waist 84cm Hip 51.5cm Hem width 14.5cm Rise 34cm Inseam 73cm Width 28cm Total length 100cm
32 inches: Waist 87cm Hip 56cm Hem width 15cm Rise 36cm Inseam 73cm Thigh width 30cm Total length 101.5cm
34 inches: Waist 94cm Hip 58cm Hem width 15cm Rise 37.5cm Inseam 74cm Thigh 32cm Total length 104.5cm
36: Waist 97cm Hip 61cm Hem width 16cm Rise 39cm Inseam 74.5cm Thigh width 32cm Total length 106cm

Swimming pool resort water bike water bike wakeboard surfing flyboard kitesurfing famous brand popular JET-PILOT USA Australia outdoor marine activity SURF WAKEBOARD SUP paddle board
Kayaking, canoeing, trekking, river activities, jet skiing, off-road biking

- Leg length 20 inches
- DuraStretch polyester body 8% spandex
- Adjustable closure
Zipper fly
- Hidden zippered side pockets with key loops
- Full body self-fabric panels and piping
- Sublimation and embroidery logo syo-tu
Self-fabric waistband
- Triple stitched crotch panels on all sides
- Custom Trim

■Material: 92% polyester, 8% spandex
■Specifications: Zippered pockets on both sides and right leg

■Jetpilot recommended waist size: 30 inches (78-82 cm)
32 inches (82-86 cm)
34 inches (84-88 cm)
36 inches (86-90cm)

*Applicable waist size varies depending on the design.

Board shorts, surf shorts, swimming trunks, beach, pool, resort, jet ski, water bike, wakeboard, surfing, flyboard, kite surfing, famous brand, popular, JET-PILOT, USA, Australia, outdoor, marine activities, SURF WAKEBOARD, SUP, paddle board, kayak, canoe, trekking, river play, jet ski

Introducing a new rash guard top with a slightly looser silhouette than before!
It provides body protection with just the right amount of stretch and a longer length.

By wearing a rash guard, there is no friction between your skin and the life jacket.
UPF50+ sunscreen protects your skin from UV rays.
It is also said that the stretch function reduces fatigue.
The design mainly features a logo that is easy to coordinate.

■ Flat measurements (chest circumference/length)
M size: 106cm/68cm
L size: 110cm/70cm
XL size: 113cm/72cm
*Please allow for some error as measurements are taken by our staff.

[Compatible models] Seadoo 2015 and later models
Compatible with SEA/DOO RFID system (wireless digital encode security system)
*SPARK is not compatible as it is not equipped with the above system*

●Genuine part number (OEM): 278003400 etc.

【please note】
*Programming work is required after purchase.

[Compatible models] SEA-DOO
RXP-X 300
RXT-X 300
GTX 300 ALL
GTX 230 ALL
WAKE Pro 230
GTR 230(2019-2020)

Since the stock intake hoses are not strong enough, the hoses connecting the supercharger to the intercooler and from the intercooler to the throttle become deformed, creating resistance to smooth intake.

This exclusive silicone hose has high strength and prevents deformation. In addition, the 50mm large-diameter blow-off valve releases unnecessary pressure and protects the supercharger unit when the throttle is turned off .

This is a dispenser exclusively for the salt removal and salt damage protection agent "DESALT".

This dispenser makes your work easier.
Connect the hose attachment to the dispenser to flush boats, outboard motors, etc.

[Note] DESALT concentrate is sold separately.
DESALT is used in PWC and boat engine washing to clean, purify and help prevent salt build-up and inhibit engine rust.
It can also be used on trailers, cars, marine items such as diving gear and fishing rods, and home windows that come into contact with salt water and sea spray.

It is an environmentally friendly detergent that is biodegradable and has a neutral pH.
Acts as a rust inhibitor and removes surface rust from metal surfaces.

[Usage]
●Engine flush
●Cleaning boats, jet skis and trailers ●Diving and fishing equipment ●Outdoor furniture and barbecues ●Windows, decks, awnings, etc.

It can be used on boats, trailers, cars, diving gear, fishing rods and other marine items, home windows and anything that comes into contact with salt water or sea spray.

• The original solution can be used more easily with the Desalt dispenser.
• You can also dilute it and use it to soak parts.
• Connect the hose attachment to the dispenser to flush boats, outboard motors, etc.
• Please purchase the original solution (2L or 5L) together and use it.

DESALT is a cleaning agent that removes salt and protects surfaces from salt damage .

When used to wash PWC and boat engines, it cleans, purifies and helps prevent salt build-up, inhibiting engine rust.
It can also be used on trailers, cars, marine items such as diving gear and fishing rods, and home windows that come into contact with salt water and sea spray.

It is an environmentally friendly detergent that is biodegradable and has a neutral pH.
Acts as a rust inhibitor and removes surface rust from metal surfaces.

• Using the Desalt dispenser (sold separately) makes the process even easier.
• Connect the hose attachment to the dispenser to flush boats, outboard motors, etc.
• It can also be diluted and used to soak parts in water.
  Form: Liquid (5000ml) Country of Origin: New Zealand

[Usage]
●Engine flush
●Cleaning boats, jet skis and trailers ●Diving and fishing equipment ●Outdoor furniture and barbecues ●Windows, decks, awnings, etc.

Note: Dispenser sold separately.

DESALT is a cleaning agent that removes salt and protects surfaces from salt damage .

When used to wash PWC and boat engines, it cleans, purifies and helps prevent salt build-up, inhibiting engine rust.
It can also be used on trailers, cars, marine items such as diving gear and fishing rods, and home windows that come into contact with salt water and sea spray.

It is an environmentally friendly detergent that is biodegradable and has a neutral pH.
Acts as a rust inhibitor and removes surface rust from metal surfaces.

• Using the Desalt dispenser (sold separately) makes the process even easier.
• Connect the hose attachment to the dispenser to flush boats, outboard motors, etc.
• It can also be diluted and used to soak parts in water.
  Form: Liquid (2000ml) Country of Origin: New Zealand

[Usage]
●Engine flush
●Cleaning boats, jet skis and trailers ●Diving and fishing equipment ●Outdoor furniture and barbecues ●Windows, decks, awnings, etc.

Note: Dispenser sold separately.

Floats on water! New Aurora color available!
It has the highest dustproof and waterproof rating of IP68, and is luminous so it glows in the dark.
The included strap can be used in two ways: around the neck or across the shoulder.
The strap has two points of attachment, so it doesn't get twisted and stays in place when turned inside out, which is nice.
You can also adjust the length of the strap on both ends.

Product specifications: Maximum size: Approx. 81W x 25D x 160H
■Material: ABS/PVC
■Waterproof performance: IPX8
■Accessories: Shoulder strap x 1
■Size (main body): Approx. 121(W) x 15(D) x 220(H)mm
Weight (main unit): Approx. 60g
*Excluding accessories

Completely waterproof and dustproof (IP68) - passed 30m water depth test: Obtained the international dustproof and waterproof standard "IP68"

It meets the criteria of "no dust can get inside (dustproof)" and "no water can get inside even if it is continuously submerged in water (submersible)," and has passed a 30m submersion test, making it waterproof and dustproof according to IP68. *This product will only remain waterproof if it is securely sealed.

Most of one side is transparent, allowing you to tap and flick while your smartphone is inside the case.
When completely sealed, it floats on water and does not sink, so it can be used safely near water.

You can tap and flick your phone and even make calls while it's in the waterproof case. You can send emails, watch videos, search the web, and more without having to take your smartphone out.
It is also designed to make it easy to open the lock even when your hands are wet.

[Note] "Kuroneko Yu-Mail" is only available for single item shipments.
If free shipping items are ordered at the same time, they will be shipped together.

Jet ski, watercraft, water bike, surfing, diving, bodyboard, wakeboard, wakesurfing, kiteboard, flyboard, SUP, windsurfing, kayak, canoe, snorkeling, marine sports, boat, trekking, board, fishing, sea, river, lake, travel, pool, bathing, gym, resort

Floats on water! New pearl color released!
This is a convenient, large waterproof case that can hold your smartphone even with the case attached.
The float material makes it float on water, and it is dustproof and waterproof, rated the highest IPX8 standard. The included strap can be worn both around the neck and across the shoulder.
The strap is fastened in two places so it won't get twisted and the case won't turn upside down. The length of the strap can also be adjusted.

Product specifications: Maximum size: Approx. 90 (W) x 15 (D) x 180 (H)
■Material: ABS/PVC
■Waterproof performance: IPX8
■Accessories: Shoulder strap x 1
■Size (main body): Approx. 134(W) x 15(D) x 230(H)mm
Weight (main unit): Approx. 60g (excluding accessories)

Completely waterproof and dustproof (IP68), passed 30m water depth test: Obtained the international dustproof and waterproof standard "IP68".
It meets the criteria of "no dust can get inside (dustproof)" and "no water can get inside even if it is continuously submerged in water (submersible)," and has passed a 30m submersion test, making it waterproof and dustproof according to IP68. *This product will only remain waterproof if it is securely sealed.

Most of one side is transparent, allowing you to tap and flick while your smartphone is inside the case.
When completely sealed, it floats on water and does not sink, so it can be used safely near water.

You can tap and flick your phone and even make calls while it's in the waterproof case. You can send emails, watch videos, search the web, and more without having to take your smartphone out.
It is also designed to make it easy to open the lock even when your hands are wet.

[Note] "Kuroneko Yu-Mail" is only available for single item shipments.
If free shipping items are ordered at the same time, they will be shipped together.

Jet ski, watercraft, water bike, surfing, diving, bodyboard, wakeboard, wakesurfing, kiteboard, flyboard, SUP, windsurfing, kayak, canoe, snorkeling, marine sports, boat, trekking, board, fishing, sea, river, lake, travel, pool, bathing, gym, resort

It has a gusseted design that can hold small items. It can also accommodate large smartphones up to 6.7 inches!
There is a divider inside so your smartphone is easy to use.

Made of durable PVC material, it can be used in a wide range of situations, such as outdoors, marine sports, and travel. The included strap can be used in 2 ways.
You can carry a variety of items such as your smartphone, wallet, and electronic keys without getting them wet.
The bottom is gusseted so it can stand on its own.

Product specifications: Maximum size: Approx. 90 (W) x 15 (D) x 180 (H)
■Material: ABS/PVC
■Waterproof performance: IPX8
■Accessories: Shoulder strap x 1
■Size (main body): Approx. 160(W) x 70(D) x 320(H)mm
Weight (main unit): Approx. 58g
*Excluding accessories

Jet ski, watercraft, water bike, surfing, diving, bodyboard, wakeboard, wakesurfing, kiteboard, flyboard, SUP, windsurfing, kayak, canoe, snorkeling, marine sports
Boat trekking Boat Fishing Sea river lake Travel Pool Bathing Gym Resort　　　　　　　

[Compatible grades] Alphard (G/X), Vellfire (V/X), Modelista Aero

Model: DBA-ANH20W / DBA-ANH25W
DBA-GGH20W / DBA-GGH25W

Grade: Modelista/V/X base *Cannot be installed on S/Z base

[Stainless steel [type-1] (all stainless steel type)]
All side plates, cross members, etc. are SUS304 stainless steel type.
A top-of-the-line model with features, styling, and materials that are unique to Tight Hitch.

Drilling required.
[Traction force] C (750kg or less)
[Estimated installation time] Approximately 5 hours

【set content】
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

benz slope

[Compatible car models] G550, G350, 463236, 463244, 463272 (Armor game)

[First year registration] H6.12~

*Screw holes tapped in 4 locations M10→M12

Traction force: B (500kg or less)
Estimated installation time: 4 hours

[Steel (steel type)]
Basic type with tight hitch.

【set content】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Car side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that this item is completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

[Compatible grades] Alphard (G/X), Vellfire (V/X), Modelista Aero

Model: DBA-ANH20W / DBA-ANH25W
DBA-GGH20W / DBA-GGH25W

Grade: Modelista/V/X base *Cannot be installed on S/Z base

[Stainless steel [type-1] (all stainless steel type)]
All side plates, cross members, etc. are SUS304 stainless steel type.
A top-of-the-line model with features, styling, and materials that are unique to Tight Hitch.

Drilling required.
[Traction force] C (750kg or less)
[Estimated installation time] Approximately 5 hours

【set content】
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

benz slope

[Compatible car models] G550, G350, 463236, 463244, 463272 (Armor game)

[First year registration] H6.12~

*Screw holes tapped in 4 locations M10→M12

Traction force: B (500kg or less)
Estimated installation time: 4 hours

[Steel (steel type)]
Basic type with tight hitch.

【set content】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Car side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that this item is completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

Cherokee

[Compatible car model] ABA-KK37

[First year registration] June 2008 to April 2013

Traction force: C (750kg or less)

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plate are SUS304 stainless steel type.
A stylish and reasonably priced hitch member whose main visible cross member is made of stainless steel.

【set content】
Stainless hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

benz slope

[Compatible car models] G550, G350, 463236, 463244, 463272 (Armor game)

[First year registration] H6.12~

*Screw holes tapped in 4 locations M10→M12

Traction force: B (500kg or less)
Estimated installation time: 4 hours

[Steel (steel type)]
Basic type with tight hitch.

【set content】
Steel hitch ball / Steel ball mount / Steel ball mount lock key / 6-core wire / Car side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that this item is completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

Cherokee

[Compatible car model] ABA-KK37

[First year registration] June 2008 to April 2013

Traction force: C (750kg or less)

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plate are SUS304 stainless steel type.
A stylish and reasonably priced hitch member whose main visible cross member is made of stainless steel.

【set content】
Stainless hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.

RAV4

[Compatible car model] MXAA54 *TRD aero compatible

[Traction force C (750kg or less)
[Estimated installation time] Approximately 3 hours

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plate are SUS304 stainless steel type.
A stylish and reasonably priced hitch member whose main visible cross member is made of stainless steel.

【set content】
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.
・Delivery to Okinawa Prefecture will be delivered 7-10 days after shipping as it will be shipped by sea.

RAV4

[Compatible car model] MXAA54 *TRD aero compatible

[Traction force C (750kg or less)
[Estimated installation time] Approximately 3 hours

[Stainless steel type-2 (half stainless steel type)]
All parts except the side plate are SUS304 stainless steel type.
A stylish and reasonably priced hitch member whose main visible cross member is made of stainless steel.

【set content】
Hitch ball / Stainless steel ball mount / Stainless steel ball mount lock key / 6-core wire / Vehicle side electrical wiring connector / Connection tap / High tension bolt for hitch installation

[About the product]
●All hitch members are made to order. (Estimated delivery time is approximately 5 days to 2 weeks*) *Varies depending on vehicle model and material.
●Please note that some materials and types are completely made to order, so cancellations or changes cannot be made after the order has been placed.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please check compatibility before ordering. Please refrain from checking compatibility after placing your order.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model. Additionally, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Basically, this product is shipped directly from the manufacturer.
・Delivery to Okinawa Prefecture will be delivered 7-10 days after shipping as it will be shipped by sea.

hiace van just low

[Compatible models] LH113V, 119V, 172V, 178V, etc.

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-8
[Installation difficulty] ☆☆
Hole required
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

hiace van

[Compatible models] LH113V, 119V, 172V, 178V, etc.

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-9
[Installation difficulty]☆

*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

hiace van just low

[Compatible models] LH113V, 119V, 172V, 178V, etc.

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-8
[Installation difficulty] ☆☆
Hole required
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SF5

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty]☆

*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SH5

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Required hole drilling Heat shield plate bending processing
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SJG

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-6
[Installation difficulty] ☆☆

*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SJG

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-6
[Installation difficulty] ☆☆

*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SH5

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Required hole drilling Heat shield plate bending processing
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

forester

[Compatible model] SJG

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-6
[Installation difficulty] ☆☆

*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Pajero Mini *Duke not available, type with license plate embedded in bumper NG (H20.9~?)

[Compatible model] ABA-H58A

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty] ☆☆
Duke not allowed, type with license plate embedded in bumper NG (H20.9~?)
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Pajero Mini *Duke not available, type with lamp on bumper NG

[Compatible model] H53A/H58A

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] B
[Ball mount] B-7
[Installation difficulty]☆
Duke not allowed, type with lamp on bumper NG
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

X-TRAIL

[Compatible model] NT32

*If the plate does not fit, drilling is required.Relay wiring may be required.

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-8
[Installation difficulty] ☆☆
If the plate does not fit, drilling is required.Relay wiring may be required.
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

X-TRAIL

[Compatible model] NT32

*If the plate does not fit, drilling is required.Relay wiring may be required.

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-7
[Installation difficulty] ☆☆
If the plate does not fit, drilling is required.Relay wiring may be required.
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

X-TRAIL

[Compatible model] NT31

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-8
[Installation difficulty] ☆☆
Hole required
*******************************************

[Steel/New Hitch (NHC)]
*Main bar (oval type) and accessories (excluding ball mount) are both steel types*
【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

This is the basic model that embodies the functionality of the Zap Board. There are three designs in total.
This series is highly recommended as an introductory version regardless of age, physical strength, or skill level.
It is recommended for beginners as it is very stable at the start.

The ZUPBOARD is easy to enjoy because you don't need to hold the towing handle to start underwater.
You can stand up in the boat and glide right away without any difficult skills or strength required.
You can ride it lying on your stomach, but once you get used to it, you can also ride it kneeling or backwards.
You can also stand up by holding the rope, so you can enjoy a variety of different ways to play with this one item!

■Slip-in foot strap for easy toe insertion■Side handle and tow rope hook molded into the board■Deck with EVA foam that is gentle on the skin■Size: (Length) approx. 145 x (Width) approx. 64 x (Thickness) 6 cm
Weight: Approx. 8kg

[With special handle]
The "Double Zap Handle" allows you to adjust the length of the rope.
With two grips, it is easier to hang the board on a hook and less likely to get your fingers pinched in the board.

[Shipping Information]
*Due to the shape of the product, it cannot be packaged together with other products.

RX300t *Not compatible with hybrid vehicles

[Compatible model] 3BA-AGL20W/AGL25W

A stylish oval steel hitch member made using the lost wax (precision casting) method.
The member part, mounting stay, etc. are baked painted, the hitch ball is chrome plated, and the detachable pin is unichrome plated.
The ball mount is also made of stainless steel (matte) with an O-ring that reduces rattling noise.

[Traction power] C
[Ball mount] B-8
[Installation difficulty] ★★☆☆☆ Under cover removal

[Steel/New Hitch (NHC)]
Main bar (oval type) and accessories (excluding ball mount) are both made of steel.

【set content】
Stainless steel (matte) ball mount / Steel hitch ball / Steel detachable pin / Steel mounting stay/bolt / Wiring socket mounting stay / Wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Lexus RX200t

[Compatible models] AGL20W, 25W

*Under cover removal

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-6
[Installation difficulty] ☆☆
Under cover removal
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Lexus RX200t

[Compatible models] AGL20W, 25W

*Under cover removal

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-6
[Installation difficulty] ☆☆
Under cover removal
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

These shorts are made for jet riding with excellent heat retention and elasticity.
The high-quality chloroprene feels comfortable on the skin and won't cling to your thighs even when wet. It has the best length and protects your inner thighs from scratches.
There are zippered pockets on the left and right that are convenient for storing small items.

■Material: 1mm chloroprene ■Specifications: Pockets...2 total on left and right

■Actual product size when laid flat: M: Waist circumference 84cm Total length 57cm Inseam 29cm Hem circumference 60cm
L: Waist circumference 90cm, total length 58cm, inseam 30cm, hem circumference 62cm
XL: Waist circumference 96cm, total length 59cm, inseam 31cm, hem circumference 64cm
2XL: Waist circumference 100cm, total length 60cm, inseam 32cm, hem circumference 66cm
*Please note that there may be errors due to measurements taken by our staff.

Personal watercraft (PWC)
water motorcycle water bike
jet ski watercraft

Lexus RX200t

[Compatible models] AGL20W, 25W

*Under cover removal

A stylish oval stainless steel hitch member made using the lost wax (precision casting) method.
The main bar, ball mount, hitch ball, and detachable pin are made of stainless steel, and the mounting stays are baked on steel.
In addition, the ball mount is a top-of-the-line model that comes with an O-ring that reduces rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-6
[Installation difficulty] ☆☆
Under cover removal
*******************************************

[Stainless steel hitch (SHC)]
*The main bar and accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.

Lexus RX200t

[Compatible models] AGL20W, 25W

*Under cover removal

This hitch member is a combination of a stylish oval steel hitch member made using the lost wax (precision casting) method and a stainless steel ball mount set.
The ball mount, hitch ball, and detachable pin are made of stainless steel, and the member part, mounting stay, etc. are baked and painted.
The ball mount also features an O-ring to reduce rattling noise.

*******************************************
[Traction power] C
[Ball mount] B-6
[Installation difficulty] ☆☆
Under cover removal
*******************************************

[Half stainless steel/combi hitch (CHC)]
*The main bar is made of steel, and the accessories (ball mount, hitch ball, detachable pin) are made of stainless steel*

【set content】
Stainless steel ball mount/stainless hitch ball/stainless steel detachable pin/steel mounting stay/bolt/wiring socket mounting stay/wiring kit

●Estimated delivery time for hitch members is approximately 2 to 3 weeks.
●For some car models, we may ask you to fax your vehicle inspection certificate to confirm compatibility.

[Disclaimer]
・Please be sure to check compatibility before ordering.
-The photo is an example, and the installation method and shape may vary depending on the vehicle model.
- Machining may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Delivery to Okinawa will take 7-10 days after shipping as it will be delivered by sea.