Collection: bestseller

[Product specifications]
■Material: Stainless steel
■Total length: 2m
■Wire diameter: 8mm
■Chain inner diameter: 38 x 13mm
...
■Accessories: Stainless steel shackle x 2

A stainless steel anchor chain that is rust resistant and has a beautiful luster.

■A manual fuel delivery pump that is convenient when starting an outboard engine.

■Compatible with hose inner diameter 3/8 (9.5mm)

[About the product]
Please note that the product color may differ depending on the arrival time.

●It is a swivel base whose upper part rotates 360 degrees.

●Used for casting sheets, folding sheets, etc.

-Material: Steel (black paint)

-Mounting hole size: 13-14.8cm x 13-14.8cm

●The brass lock (main body: made of brass) prevents theft, making it rust-resistant and durable.

●A set of 5 uses a common key, so you can lock all 5 with one key.

This is a ``cushion pad'' that is placed on the platform of a trailer to improve the slippage of the boat.
It is a material that is resistant to corrosion and water, and does not wear out easily even when loaded with heavy ships.

【size】
Width: 20cm
Total length: 365cm

[Installation method]
Paste it with rubber adhesive and secure it firmly with a tacker (a large version of a stapler).

[Product specifications]
■Material: Stainless steel
■Total length: 2m
■Wire diameter: 6mm
■Chain inner diameter: 30 x 10mm
...
■Accessories: Stainless steel shackle x 2

A stainless steel anchor chain that is rust resistant and has a beautiful luster.

[Product specifications]
■Maximum capacity: 300Amp
■Flange diameter: 58.5mm
■With waterproof cap
*Detailed size is shown in the photo

●A simple toggle switch type battery switch.
●Can be used to supply and cut off battery power.
●The red switch lever can be removed.

●This is a spare horn for mini jet horn (product number: 60445).

●It's safe to have one as a spare in case you lose or damage the horn part.

●This is an air horn that makes a loud sound of about 108 decibels just by pressing it.

-A set of 1 bugle part and 2 cartridges. We also sell cartridges only (product number: 60446, ¥1,785), so they can be used repeatedly.

●Cartridge capacity: 200ml/1 bottle

●Intermittent pronunciation time: Approximately 20 minutes
*Intermittent sounding time is the total time it takes for the cartridge to empty after the sound is played several times. Please use this as a guideline as it will vary depending on usage conditions such as external temperature.

*The continuous sounding time is approximately 1/4 of the intermittent sounding time. This is because the temperature inside the cartridge decreases due to sound production, and once the cartridge returns to room temperature, it can be used again.

●The continuous sound time is approximately 1/4 of the intermittent sound time. This is because the temperature inside the cartridge decreases when the cartridge is sounded, and when the cartridge returns to room temperature, it can be used again.

●Products not subject to fluorocarbon gas regulations

●Sound pressure: Approximately 108 decibels

●Basic frequency: 500Hz(+-)30

●Cartridge diameter: approx. 53mm

-Cartridge part overall height: approx. 135mm

●Horn diameter: approx. 60mm

-Horn part total length: approx. 150mm

■Slide width (A): 126.0mm
■Inner width (B): 306.0mm
■Depth (C): 163.0mm

[Product specifications]
■Size:
Diameter: 120mm
Total length: 360mm

This is a fender for ships with low gunwales like bass boats and aluminum boats.
The part that attaches to the hull is bent at 90 degrees, so you can prevent damage to the gunwale by attaching it directly to a cleat.

As of August 2017, this product will be delivered with air in it.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97560) sold separately.

[Product specifications]
■Material: Stainless steel
■Total length: 2m
■Wire diameter: 11mm
■Chain inner diameter: 43 x 14mm
...
■Accessories: Stainless steel shackle x 2

A stainless steel anchor chain that is rust resistant and has a beautiful luster.

[Product size]
■Total length (A): 235.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 194.0mm
*Accessories: End cap

■Slide width (A): 126.0mm
■Inner width (B): 206.0mm
■Depth (C): 163.0mm

■Slide width (A): 126.0mm
■Inner width (B): 255.0mm
■Depth (C): 163.0mm

■This is a fuel hose that comes with a pump (primer pump) for manually dispensing fuel, which is convenient when starting an outboard engine.

■Used to connect between the fuel tank and engine.

■Total length: 1.9m

■Hose inner diameter: 3/8 (9.5mm)

■Slide width (A): 127.0mm
■Inner width (B): 128.0mm
■Depth (C): 103.0mm

●By attaching it to a trailer, you can easily lift and lower the vessel.
●Uses a urethane agent that is resistant to deterioration and hardening caused by salt and UV rays, and is smooth and resistant to scratches on the boat.

[Product size]
●Roller diameter 77mm
●Total length 69mm
●Center shaft diameter 12.5mm

[Product size]
■Total length (A): 337.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 295.0mm
*Accessories: End cap

[Product size]
■Total length (A): 283.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 245.0mm
*Accessories: End cap

●By attaching it to a trailer, you can easily lift and lower the vessel.
●Uses a urethane agent that is resistant to deterioration and hardening caused by salt and UV rays, and is smooth and resistant to scratches on the boat.

[Product size]
●Roller diameter 80mm
●Total length 93mm
●Center shaft diameter 12.5mm

[Product size]
■Total length (A): 136.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 99.0mm
*Accessories: End cap

Total length 180mm x width 75mm x shaft length 100mm.

[Product specifications]
■Set of 1 each of plus (red) and minus (blue)
■Can be used up to 800 amperes.

[Applicable] The tip of the terminal (the thinnest part of the terminal)
Suitable for φ17.4mm positive type and φ15.8mm negative type.
■Can also be installed on types with bolts attached to the battery terminal.
■For D terminal
*Not available for positive type φ12.7mm and negative type φ11.1mm

A connector that can be connected to and removed from the battery terminal with a single touch.
Lift up the blue or red cap to loosen the terminal.
You can easily remove the wires from the battery. Attaching is the reverse operation.

This is the bracket required to secure the keel roller and attach it to the trailer.

■Slide width (A): 65.0mm
■Inner width (B): 112.0mm
■Depth (C): 103.0mm

■Roller diameter (A): 89.0mm
■Width (B): 194.0mm
■Shaft diameter (C): 16.0mm

■Material: Stainless steel (SUS316)
■Size
Total length 203 x stop hole ~ stop hole 73 x height 38 mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

●Can be fixed by pulling the pin and rotating it 90 degrees.

■Handle rotation diameter: 20cm
■Mounting frame: up to 76.2 x 127mm
■Material: Steel
■Maximum load: 543kg/1200LBS
■Stroke: 250mm
■Wheel diameter: 6" / 152.4mm

■Material: Stainless steel (SUS316)
■Size
Total length 152 x stop hole ~ stop hole 57 x height 31mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

■Mounting frame: up to 76.2 x 127mm
■Material: Steel/galvanized
■Maximum load: 680kg / 1500LBS
■Stroke: 300mm
■Wheel diameter: 6" double / 152.4mm

With this coupler grip, you can securely grip the tip of the trailer.
Even heavy trailers can be lifted without using a jack and can be easily attached to and detached from the hitch.

■Material: Steel plated
*The grip part is narrower type.

【please note】
Coupler handle only.
Other items used in the photo are not included.
Mounting bolts are not included.

■Material: Stainless steel (SUS316)
■Size
Total length 308 x stop hole ~ stop hole 122 x height 68 mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

-Size: width 165 x height 100 x (base 76 x 76mm)
●Good because it's made of rubber so it won't scratch the hull!

[Product specifications]
Outer diameter: 203mm
Opening diameter: 152mm
Hole diameter: 159mm

Working by putting your hands inside the double structure,
This is an opening hole for working in areas that are hard to reach.
Apply silicone adhesive, etc., and then install and fix it.

【please note】
*Cannot be installed on the floor where you will step on it.

[Product specifications]
Outer diameter: 146mm
Opening diameter: 101mm
Hole diameter: 114mm

Working by putting your hands inside the double structure,
This is an opening hole for working in areas that are hard to reach.
Apply silicone adhesive, etc., and then install and fix it.

【please note】
*Cannot be installed on the floor where you will step on it.

■Material: Stainless steel (SUS316)
■Size
Total length 124 x stop hole ~ stop hole 54 x height 28 mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

■Material: Stainless steel (SUS316)
■Size
Total length 203 x stop hole ~ stop hole 84 x height 51 mm

●This cleat is ideal for areas that require 4-point fixation and strength.
●Uses stainless steel SUS316, which is resistant to rust and corrosion (SUS316 = more corrosion resistant than SUS304).

■Roller diameter (A): 89.0mm
■Width (B): 295.0mm
■Shaft diameter (C): 16.0mm

■Roller diameter (A): 75.6mm
■Width (B): 99.0mm
■Shaft diameter (C): 16.0mm

It makes it easy to put on and take off with minimal strain.

■Material: Steel plated

【please note】
Coupler handle only.
Other items used in the photo are not included.
Mounting bolts are not included.

A basic model that embodies the functionality of the Zap Board.
This series is highly recommended as an introductory version regardless of age, physical strength, or skill level.
It is recommended for beginners as it is very stable at the start.

The ZUPBOARD is easy to enjoy because you don't need to hold the towing handle to start underwater.
You can stand up in the boat and glide right away without any difficult skills or strength required.
You can ride it while lying on your stomach, and once you get used to it you can also ride on your knees or backwards, or even stand up by holding onto the rope. You can enjoy a variety of different ways to play with just this one item!

■Slip-in foot strap for easy toe insertion■Side handle and tow rope hook molded into the board■Skin-friendly EVA foam deck■Size: (Length) approx. 145 x (Width) approx. 64 x (Thickness) 6 cm
Weight: Approx. 8kg

[With special handle]
The "Double Zap Handle" allows you to adjust the length of the rope.
With two grips, it is easier to hang the board on a hook and less likely to get your fingers pinched in the board.

[Shipping Information]
*Due to the shape of the product, it cannot be packaged together with other products.

[Product specifications]
■Material: Stainless steel (SUS304)
■Size:
Total length: 260mm
Pedestal dimensions: 85x57mm
■Holder inner diameter
⇒With rubber: 40mm
⇒No rubber: 48mm
[Contents] 5-piece set: rod holder, rubber, stop bolt, intermediate pedestal, and pedestal.

A rod holder that rotates 360° and allows you to freely set the vertical angle according to your preference.
Rubber is pasted on the inside of the rod holder, so there is no need to worry about damaging the rod.

[Product specifications]
■Material (float): PVC foam
■Float body (per piece)
Size: 141φ×175mm
Hole diameter: 25φ
...

■Rope
Size: 12φ×2m

[Float x 3] + [Rope]
●This is a fender that uses egg-shaped vinyl chloride foam in three rows.
●Float body material: PVC foam

By replacing the hose,
An air pump with excellent cost performance that can be used for both intake and exhaust.
When using on towing tubes, please use a foot pump or hand pump for finishing.
★3 types of adapters are standard equipment

■Voltage/Current AC100V/1.4Amp
■Outlet plug specifications
■Continuous use time approximately 13 minutes
■Air flow rate 510L/min
■Pressure: 1.02psi
■Accessories: 3 types of adapters

A rope specifically designed for towing such as water toy tubes.

■Suitable for approximately 1 to 2 people
■Length 18m
■ Breaking strength: 1,078kg (2,375lbs)

A compact, classic donut-shaped towing tube.

■Size: 137cm
■Maximum capacity: 1 person ■1 towing point ■PVC tube & nylon full cover

*Pump and rope are not included.

[JSPTOKAI original square clear bag]
56L large capacity bag that can store 4 life jackets at once
The top can be opened wide with a U-shaped zipper to store marine gear.
The bottom is made of mesh material that allows water to drain.
With this bag, you can solve the problem of carrying and storing goods!
■Size: 50x45x25cm
■Fabric: Clear PVC black mesh

This model allows you to enjoy towing from both the front and the back.
If you put your weight on the backrest, the front will rise up and you can jump in the air.
Aggressive towing is possible.
In addition, there are many handle grips installed in various places,
You can challenge yourself in your own original style.

■236ｘ216cm
■Maximum capacity: 4 people■2 towing points■PVC tube■Full nylon cover*Main unit only; pump and rope not included.

[Includes a free JSPTOKAI original bag for convenient storage of supplies]
This 56L large capacity bag can store up to four life jackets at once. The top can be opened wide with a U-shaped zipper to store marine gear.
The bottom is made of mesh material, so water can drain easily.
With this bag, you can easily solve the problem of carrying and storing your items!
(Size: 50x45x25cm / Fabric: Clear PVC Black mesh)

This model allows you to enjoy towing from both the front and the back.
If you put your weight on the backrest, the front will lift up, allowing you to perform aggressive towing, such as jumping in the air.
In addition, there are many handlebar grips installed in various places,
You can challenge yourself in your own original style.

■Size: 201×198cm
■Maximum capacity: 3 people ■2 towing points ■PVC tube ■Nylon full cover

[Includes a free JSPTOKAI original bag for convenient storage of supplies]

This 56L large capacity bag can store up to four life jackets at once. The top can be opened wide with a U-shaped zipper to store marine gear.
The bottom is made of mesh material, so water can drain easily.
With this bag, you can easily solve the problem of carrying and storing your items!
(Size: 50x45x25cm / Fabric: Clear PVC Black mesh)

Have you ever experienced ``slalom speed slowing down due to water resistance'' when the towing rope came into contact with the water surface?
With this booster ball, there is no resistance due to water pressure and you can enjoy free and smooth action.
It is also a plus-one optional item for water toys that eliminates the discomfort of the top sinking when starting.
There are 8.5M ropes on each side of the ball, so the total length is approximately 18M, so if you have this, you won't need a towing rope.

【Product details】
■Ball diameter 69x97cm
■Total length: 18m
■Can be used up to 4-seater type

[Includes a free JSPTOKAI original bag for convenient storage of supplies!]

This is a round toy with four double grips.
Riding with four people is four times the fun!
It is one of the most compact four-seater vehicles.

■Size: Diameter 188cm
■Maximum capacity: 4 people ■1 towing point ■PVC tube ■Nylon full cover

*Only the main unit; pump and rope are not included.

[JSPTOKAI original square clear bag]
A large 56L bag that can store up to four life jackets at once
The U-shaped zipper allows the top to open wide, allowing you to store marine gear.
The bottom is made of mesh material, so water can drain easily.
With this bag, you can easily solve the problem of carrying and storing your items!
■Size: 50x45x25cm
■Fabric: Clear PVC, black mesh