Collection: bestseller

●An electronic marine horn for ships.

●Emits a pleasant electronic sound with a lingering sound.

●The mounting hardware and screws are made of rust-resistant stainless steel.

[Product specifications]
■Model number: ESM-12
■Current consumption: 12V/5A
■Output: 110dB
■Weight: 950g
■Size: Width 191 x Depth 180 x Height 90mm (including bracket)

[Product specifications]
■Material: UV resistant polypropylene
■Size: Height 305 x Width 525 x Depth 70mm
■Holder inner diameter: 45φ
...
■Assembly type
■Mounting screws included

Holes are provided for convenient storage and organization of knives, pliers, fishing tackle, etc.
By using UV-resistant polypropylene as the material, there is little deterioration due to ultraviolet rays and excellent weather resistance.

●Anchor for trolling from rubber boats to small boats.
●You can adjust the size of the outlet and the binding part of the opening, so you can easily adjust the effectiveness. A stainless steel thimble is used to remove the twist.

■If it is too effective: Tie the eyelet between the hanging ropes at the opening. Narrowing the opening reduces effectiveness.
■When the effect is weak: Please tie the drain eyelet. Closing the drain will make it more effective.

【Product Specifications】
●Compatible with: Rubber boats to 16-foot boats
●Size: Maximum opening diameter 45φ x total length 100cm

【please note】
*The rope that connects the sea anchor and the boat (towing rope) is not included.
*Please prepare in advance before use.

●This is a type of cleat that pulls up the rope fixing part only when in use.
When not in use, there are no protrusions on the gunwale, so it does not get in the way.
●The rope fixing part stops at any height. (Even if you pull up the rope fixing part and let go, it will not fall off.)
●Easy installation by drilling two 22Φmm mounting holes and tightening nuts from the back side.

[Product specifications]
■Material: Stainless steel (SUS 316)
■Size:
Mounting base width: 52 x depth 38mm
Cleat width: 145mm
Height with cleats stowed: 12mm
Maximum height when cleat is pulled up: 41mm

*When installing, a space of 80mm or more is required under the cleat base.
...
■With water drain hole

●An epoch-making sea anchor for fishing boats that has a (lifting function) in the parachute body.

●Easy to operate as no towing rope, buoy, or weight is required

●It can be salvaged without resistance by releasing the center cord attached to the tow rope.

●Effective parachute shape starts working quickly after injection.

●Suitable for small boats of 15 to 19 feet.

●Opening diameter: 1.5m

●Tow rope length: 9m

●This is a type of cleat that pulls up the rope fixing part only when in use.
When not in use, there are no protrusions on the gunwale, so it does not get in the way.
●The rope fixing part stops at any height. (Even if you pull up the rope fixing part and let go, it will not fall off.)
●Easy installation by drilling two 22Φmm mounting holes and tightening nuts from the back side.

[Product specifications]
■Material: Stainless steel (SUS 316)
■Size:
Mounting base width: 114x depth 33mm
Cleat width: 110mm
Height with cleats stowed: 12mm
Maximum height when cleat is pulled up: 41mm
*When installing, a space of 80mm or more is required below the cleat base.
...
■With water drain hole

■Compatibility: 3/8” hose 8902-7 (17660-ZV5A00) for Honda outboard motors
■Compatible with 9.5mm inner diameter hose

Fitting for outboard motor fuel tank hose
Secures to a 9.5mm inner diameter hose with an optional clamp.
It can be attached and removed with one touch to the tank side fitting.

*The fitting for the outboard motor side is part number: 99522.

■Compatibility: 1/4” NPT 8901-7 (16977-ZV5A00) for Honda outboard motors
■Tank part screw size: 1/4 inch outer diameter 13mm

This is a fitting that is attached to the fuel tank of an outboard motor to take out the fuel.

■This is a fitting attached to the outboard motor fuel tank side hose.

■Can be installed and removed with one touch on the tank side fitting.

■Type: Hose side fitting (for diameter: Φ13mm)

■Compatibility: For Suzuki outboard motors (75 HP or more) 3/8” hose

■Hose compatible size: Compatible with inner diameter 9.5mm hose

*Fix to a hose with an inner diameter of 9.5 mm using a clamp sold separately.

* Regarding compatibility with SUZUKI outboard motors, even if the outboard motor is compatible, the caliber may be different and it may not be possible to use it. Please check the caliber size before making your selection regarding fitting compatibility.

Gear cases, pumps, heat exchangers, compressor engines, etc.
A liquid sealant that can be used as a molded gasket for all types of metal flanges.
It can seal leaks caused by surface scratches, damage, small distortions, etc.
Solved the problem of molded gaskets sagging, eliminating the need for retightening.
Improves the rigidity of the flange joint.

●Contents: 50ml
●Operating temperature (℃): -55 to 150

Used between the oil pan and the block where there are relatively many gaps.
A one-component, room temperature curing, oxime-free silicone sealant that is non-corrosive, low volatility, highly flexible and has excellent oil resistance. Ideal for sealing places where the flange mating surface changes due to vibration, such as press-formed covers.
Operating temperature (℃): -70 to 260
Dry to the touch 30 minutes, curing time 24 hours

[Contents] 473ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] For fabrics such as awnings and convertible roof fabrics (sun protection, water repellency, etc.)

●A strong film is formed on the surface of the fabric, providing waterproof effects and preventing deterioration such as fading due to UV rays.
Continuous use will maintain the original color of the fabric over many years and prevent the growth of mold.

●Sun protection, water repellency, stain resistance, and mold prevention agent for fabrics (acrylic, Dacron, olefin, cotton, etc.).
●Awnings, convertible roof fabrics, curtains, outdoor wear, Gore-Tex products,
Valid for tents, umbrellas, backpacks, rucksacks, canvas shoes, etc.

【please note】
Cannot be used on vinyl, plastic, rubber, synthetic leather, or FRP.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

●An epoch-making sea anchor for fishing boats that has a (lifting function) in the parachute body.

●Easy to operate as no towing rope, buoy, or weight is required

●It can be salvaged without resistance by releasing the center cord attached to the tow rope.

●Effective parachute shape starts working quickly after injection.

●Suitable for small boats up to 15 feet.

●Opening diameter: 1m

●Tow rope length: 8m

●Diameter x body length x small cushion (mm): 180x620x160mm

●Weight: 1.9 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

●For general metal threaded pipe fittings. Contains Teflon so there is no galling when tightening.
●It has high clay and thixotropic properties, so even large diameters have instant sealing properties.
●Low strength type that can be removed using regular tools.

【detail】
●Contents: 50ml
●Breakdown/Escape Torque (N・m): 7
●Operating temperature range: -55 to 150℃

[Contents] 473ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastics, anodized aluminum, etc.
It is effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Contents] 296ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastic, anodized aluminum, etc.
[Effects] Effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Contents] 3780ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] For fabrics such as awnings and convertible roof fabrics (sun protection, water repellency, etc.)

●A strong film is formed on the surface of the fabric, providing waterproof effects and preventing deterioration such as fading due to UV rays.
Continuous use will maintain the original color of the fabric over many years and prevent the growth of mold.

●Sun protection, water repellency, stain resistance, and mold prevention agent for fabrics (acrylic, Dacron, olefin, cotton, etc.).
●Awnings, convertible roof fabrics, curtains, outdoor wear, Gore-Tex products,
Valid for tents, umbrellas, backpacks, rucksacks, canvas shoes, etc.

【please note】
Cannot be used on vinyl, plastic, rubber, synthetic leather, or FRP.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Product specifications]
■Type: Chrome
■Material: Plastic
■Flange diameter: 42mm
■Maximum thickness when inserting flange: 33mm
■Total length: 76mm
■Compatible with hose inner diameter 19mm

●This is a through hole for discharging the bilge pump overboard.
●The ABS resin has been treated with 5 layers of surface treatment to create a chrome finish that is scratch resistant and hard to peel off.
●Although the material is plastic, it looks like stainless steel and has a luxurious feel.

medium strength 243

●Contents: 50ml (liquid type)
●Recommended screw diameter: M6 to M20
●Breakdown/Escape Torque (N・m): 20/7
●Temperature range (℃): -55 to 150
●Color: Blue

●Diameter x body length x small cushion (mm): 130x500x140mm

●Weight: 0.9 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

【correspondence】
Manufactured by Polyform, exclusive for the following series
・A series fender
・G series fender
*Please note that it cannot be used with other companies' fenders!

[Product specifications]
Nozzle size:
Thin part: 7φmm
Thick part: 12φmm
Total length: 24mm

●Attach the thin side shown in the photo to the air pump.
●A nozzle for manually injecting air.
(Attach this nozzle to the tip of a bicycle air pump and operate the pump while holding it with your hand to prevent the tip from coming off the fender.)

●Diameter x body length x small cushion (mm): 100x400x140mm

●Weight: 0.5 kg

●No puncture fender made of EVA foam molding.

●Excellent water and weather resistance, and will not harden even in cold regions. (It is not oil resistant.)

●Compared to air fenders, the width of the collapse is very small, so it is OK even if the diameter is smaller than the air fender you are using!

■■■■■Usage example■■■■■

●This fender consists of two large and small cushions, and the small cushion can be moved freely according to the shape of the ship and the installation position, reducing rope twisting and abrasion.

●Can also be installed on the side. You can make it horizontal by inserting a small cushion into the pilot hole of the large cushion and extending ropes from both sides.

- Compatible with A series fender, G series fender, F series fender, HTM series fender
●A hand pump for manually inflating air.
●Since the amount of air injected is small, please use it to replenish air when it leaks.

*Exclusively made by Polyform (for fenders that use 97561 nozzle).
*Please note that it cannot be used with other companies' fenders!
*Nozzle is not required when using this pump.

[Product specifications]
■Type: Chrome
■Material: Plastic
■Flange diameter: 48mm
■Maximum thickness when inserting flange: 32mm
■Total length: 84mm
■Compatible with hose inner diameter 28.5mm

●This is a through hole for discharging the bilge pump overboard.
●The ABS resin has been treated with 5 layers of surface treatment to create a chrome finish that is scratch resistant and hard to peel off.
●Although the material is plastic, it looks like stainless steel and has a luxurious feel.

[Product specifications]
■Type: White
■Material: Plastic
■Flange diameter: 61mm
■Maximum thickness when inserting flange: 43mm
■Effective length of hose insertion part: 37mm
■Compatible with hose inner diameter 28.5mm

●This is a through hole for discharging the bilge pump overboard.
●Made of plastic

*Sold as one Suruhal L-type elbow. Hoses etc. are not included.

[Product specifications]
■Material: UV resistant polypropylene
■Size: Height 305 x Width 430 x Depth 70mm
■Holder inner diameter: 45φ
...
■Assembly type
■Mounting screws included

Holes are provided for convenient storage and organization of knives, pliers, fishing tackle, etc.
By using UV-resistant polypropylene as the material, there is little deterioration due to ultraviolet rays and excellent weather resistance.

[Product specifications]
■Material: Plastic resin
■Size: Width 162x Height 42x Depth 65mm

●Resin handle that can also be used as a step.
●Fix to the transom etc. with screws, etc.

●A22mm B34mm C89mm D44mm E17mm
●Small roller attached to the end of the bow keel
●Made of hard rubber

[Contents] 16L
●Thinner exclusively for ship bottom paint SEAJET 033, 034, and 035.

[Product Specifications]
■Material: Plastic
■Diameter: 180φ
Hole diameter: 16mm

●It is also possible to set up courses and float rope nets, etc.

[Product specifications]
■Material: Plastic
■Diameter: 300φ
■Hole diameter: 19mm

●You can also set up courses and float rope nets.

●Can be fixed by pulling the pin and rotating it 90 degrees.

■Handle rotation diameter: 200mm
■Mounting frame: up to 76.2 x 127mm
■Material: Steel (galvanized finish)
■Maximum load: 679kg
■Stroke: 250mm
■Wheel diameter: Approximately 20cm
■Material of tire part: Made of resin

[Product specifications]
■Material: Polyethylene
■Full length: approx. 1380cm
■Hose diameter: 28.5mm

A freely bendable bellows hose that connects the bilge pump and the Suruhal.
A lightweight corrugated hose that won't collapse even when bent during handling.
It can be easily cut with a cutter.
The parts that can be cut and tightened with hose bands etc. are set every 30cm.

【please note】
*Suruharu in the photo is not included.

●A simple sea anchor for small boats and trolling.
●Compared to conventional Japanese-made products, it is extremely easy to load, retrieve, and store, making it ideal for small ships.
-Stainless steel wire is sewn into the edge of the water inlet (opening), so it opens automatically without being put into the water, and the wire acts as a weight.
The anchor effect is immediately apparent, and collection and storage are very easy.
●A chuck is attached to the drainage part (pointed part of the cone), and the effectiveness of the sea anchor can be adjusted by opening or closing this part.

【Product Specifications】
■Material:
Parachute part: 840 denier nylon,
Inside: PVC coat
■Compatible with: For fishing boats up to 28FT (FB boats not available)
■Size: Diameter 90 x total length 140cm
■Weight: Approximately 1.8kg

【please note】
*Cannot be used in stormy weather.
*The rope that connects the sea anchor and the boat (towing rope) is not included.
Please prepare a rope with a diameter of 10 to 12 mm x 1.5 times the total length of the boat.

[Product specifications]
■Material: Plastic
■Diameter: 360φ
■Hole diameter: 23mm

●You can also set up courses and float rope nets.

[Product specifications]
■Material: Polyethylene
■Full length: approx. 1380cm
■Hose diameter: 19mm

A freely bendable bellows hose that connects the bilge pump and the Suruhal.
A lightweight corrugated hose that won't collapse even when bent during handling.
It can be easily cut with a cutter.
The parts that can be cut and tightened with hose bands etc. are set every 30 cm.

【please note】
*Suruharu in the photo is not included.

●A simple sea anchor for small boats and trolling.
●Compared to conventional Japanese-made products, it is extremely easy to load, retrieve, and store, making it ideal for small ships.
-Stainless steel wire is sewn into the edge of the water inlet (opening), so it opens automatically without being put into the water, and the wire acts as a weight.
The anchor effect is immediately apparent, and collection and storage are very easy.
●A chuck is attached to the drainage part (pointed part of the cone), and the effectiveness of the sea anchor can be adjusted by opening or closing this part.

【Product Specifications】
■Material:
Parachute part: 840 denier nylon,
Inside: PVC coat
■Support: Japanese boats up to 25FT, center console boats
■Size: Diameter 60 x total length 120cm
■Weight: Approximately 1.3kg

【please note】
*Cannot be used in stormy weather.
*The rope that connects the sea anchor and the boat (towing rope) is not included.
Please prepare a rope that is 8 to 10 mm in diameter x 1.5 times the total length of the boat.

The 4FT rail has 10 rollers, allowing you to smoothly load and unload the boat.

●1 set of 2 pieces
●Size: Total length 1,220mm x width 101.6mm
●Roller diameter: 57mm
●Maximum loading weight: 1,135kg

【please note】
*The rollers may stop moving if you load a boat that is at the limit of its load capacity. Please use a moderate weight.
*To install 1 set of rails, 4 27269 mounting brackets (sold separately) are required (2 for each rail).

●By attaching this support before putting on the boat cover, you can make it easier to put on the cover.
Furthermore, the cover can be stretched while applying tension, which prevents rainwater from collecting on the cover.
●The cover support pole comes with three types of tip shapes: button, rubber holder, and thin rod shape, so it is a cover support pole that can be fixed in a variety of ways.

[Product specifications]
■Material: Aluminum
■Pole length: 91cm to 162cm
■Included: 3 types of adapters are standard equipment

●This is an automatic diffusion type dry powder fire extinguisher for ships that detects the temperature rise caused by a fire and automatically emits radiation.

●Powder fire extinguishing agents are suitable for all kinds of fires, and there is less dirt caused by the chemicals even after the fire has been extinguished.

●For daily inspection, simply check the needle on the indicating pressure gauge.
If the needle on the pressure gauge points to the green zone, it is normal.

●Just install it near the ceiling of the engine room, etc., and watch for fires 24 hours a day.
In the event of a fire, it automatically detects it and releases extinguishing agent to ensure initial extinguishment.

[Installation method]
●Simply use the included bracket to fix vertically to the side wall near the ceiling in a room with fire prevention objects.

【specification】
●Model: DD-80
●Total weight: approx. 1.7kg
●Drug amount: 0.8kg
●Protection volume: 4 cubic meters
- Total height: approx. 265 mm, total width: approx. 97 mm, depth: approx. 102 mm
●Nominal sensing temperature: 95℃
●Emission time: Approximately 4 seconds
●Radiation pattern: horizontal fan shape
●Material (body and fixed bracket): Stainless steel
●Ministry of Transport Model No. 4299
●Validity period: 6 years

*Includes recycling fee.

●An eye plate with two-point fixation suitable for installation in places with limited installation space.

[Product specifications]
■Material: Stainless steel (SUS304)
■Size: Height 76 x Width 22 x Height 25mm

A high-density polyethylene fuel tank for outboard motors.
Since it is made of polyethylene, there is no need to worry about rust and it is resistant to corrosion.

■Capacity: 12 gallons / 45 liters
■Size: Length 610 x Width 450 x Height 255mm

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・One small parcel is delivered per item, and from the second item onward, shipping fee x (number of items) will be charged.

【please note! ]
Since this product does not comply with the Fire Service Act, it cannot be refueled directly from a gas station.
Please use after transferring from a tank that is certified by the Fire Service Act.

*Hose mounting fittings are not included with this tank. Please purchase separately.
The fittings installed on the tank vary depending on the outboard motor manufacturer.

●Attach to the tip of the hitch coupler to protect the towed vehicle from scratches.
● To install, just clip it onto the edge of the coupler.
●Made of rubber
●Coupler is not included.

●A navigation light mast made of rust-resistant stainless steel.

●The base part can be easily collapsed by loosening the knob, making it convenient for storing or passing under bridges.

-Pedestal dimensions: 57mmX95mm

- Total height: 450mm

●Pipe used: diameter 25φ stainless steel pipe

*The main body and navigation light installation screws are not included.

[Product specifications]
■Capacity: 6 gallons / 22.7 liters
■Size: L552 x W375 x H267mm (*Height is up to the cap surface)
■Gauge is included with the main unit

【please note! ]
Since this product does not comply with the Fire Service Act, it cannot be refueled directly from a gas station.
Please use after transferring from a tank that is certified by the Fire Service Act.

*Hose mounting fittings are not included with this tank. Please purchase separately.
The fittings installed on the tank vary depending on the outboard motor manufacturer.

[Contents] 946ml
[Included] Hardening agent 22cc
[Applications] Surface filling and leveling agent for wood, aluminum, iron, hulls, decks, etc.

●Can be used as a surface filling and leveling agent for FRP, wood, aluminum and iron at the top and bottom of the water line.
●Dries quickly and can be polished in about 30 minutes.
●Contains very fine spherical glass, making it easy to polish and level the surface.
●Can also be used for hulls, decks, and other parts.

●A foldable, hanging type radar reflector.

[Product specifications]
■Material: Aluminum
■Dimensions: 215 x 215 x 280mm

●This is an automatic diffusion type dry powder fire extinguisher for ships that detects the temperature rise caused by a fire and automatically emits radiation.

●Since it is a powder ABC type with a pressure gauge, maintenance is easy!

●Powder fire extinguishing agents are suitable for all kinds of fires, and there is less dirt caused by the chemicals even after the fire has been extinguished.

●For daily inspection, simply check the needle on the indicating pressure gauge.
If the needle on the pressure gauge points to the green zone, it is normal.

●Just install it near the ceiling of the engine room, etc., and watch for fires 24 hours a day.
In the event of a fire, it automatically detects it and releases extinguishing agent to ensure initial extinguishment.

[Installation method]
●Simply use the included bracket to fix vertically to the side wall near the ceiling in a room with fire prevention objects.

【specification】
●Total weight: approx. 1.1kg
●Drug amount: 0.3kg
- Total height: approx. 300mm x total width: approx. 78mm x depth: approx. 91mm
●Protection volume: 2 cubic meters
●Nominal sensing temperature: 95℃
●Emission time: Approximately 2 seconds
●Radiation pattern: horizontal fan shape
●Material (body and fixed bracket): Stainless steel
●Ministry of Transport Model No. 4298
●Validity period: 6 years

*Includes recycling fee.

■Size: Total length 285mm x Ф80mm
■Shaft diameter: 16.0mm