Collection: bestseller

●This is a necessary part for installing the genuine SEA-DOO fender (product number: 295100418).

●Snap-In Fenders Installation Kit

●2 pieces/set

*This is for one side, so if you need 4 places on the left and right, you will need 2 sets.

[Compatibility]
RXT, RXT-X, GTX and WAKE Pro(2018)

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Convenient for charging mobile phones, wearable cameras, etc.

●This excellent device detects the amount of current required for proper charging time, and prevents devices from overcharging.

●2018 - Standard equipment on GTX Limited300 model.

●A tool for crimping bands on fuel hoses, engine boots, etc.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

●This is a necessary part for installing the genuine SEA-DOO fender (product number: 295100418).

●Snap-In Fenders Installation Kit

●2 pieces/set

*This is for one side, so if you need 4 places on the left and right, you will need 2 sets.

[Compatibility]
●SEA-DOO iBR model before 2017 model (*Not required for SPARK)

Spray solvent to clean the outside of the engine.
Used to remove dirt such as grease and oil.

Contents: 400g

[Compatible models] SEA-DOO
RXT-X *Model with aS (suspension)
RXT-X aS 260 (2011-2016)
*For RXT-X without aS, product number: 280000472

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications may change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

●Genuine SEA-DOO fender that is ready to be attached and detached

●Fluorescent orange body with excellent visibility

●2 pieces/set

●When using this snap-in fender, a special installation kit must be installed on the hull in advance. (*Not required for SPARK.)

※※ Sold separately ※※
[Compatibility]
●SEA-DOO iBR model before 2017 model
Requires Snap-In Fenders Installation Kit (Part number: 295100550)

●RXT, RXT-X, GTX and WAKE Pro (2018)
Requires Snap-In Fenders Installation Kit (Part number: 295100729)

[Compatible models] SEA-DOO
RXP / RXP-X (04-11 model)

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications may change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

[Capacity] 946ml x 12 bottles (case)
[Compatibility] For ROTAX 587/657/717 engines

Keep your engine clean at all times
Minimizes spark plug misfires.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

[Applications] Multi-purpose rust inhibitor for corrosion prevention and rust prevention.
[Contents] 400g

A multi-purpose rust inhibitor that penetrates quickly and prevents rust and corrosion.
Suitable for use in seawater and humid environments.
Highly recommended for maintenance inside the engine after using PWC.

SEADOO genuine product

Synthetic oil ideal for maintenance of SEA-DOO jet pumps.

maintenance supplies

●Contents: 177ml

SEA-DOO Since this is a genuine product, we cannot accept returns or exchanges.

A multi-purpose grease containing Teflon that is highly waterproof and difficult to dissolve in water.

● Contents: 400g

SEA-DOO Since this is a genuine product, we cannot accept returns or exchanges.

SPARK since 2016

[Note]
SEA DOO's RFID system (wireless digital encoding security system) is not allowed!
*Programming work is required after purchase.

Genuine safety lanyard

[Disclaimer]
As these are genuine parts, prices may change without notice.

Compatible with SEA/DOO RFID system
(Wireless Digital Encoding Security System)

*Programming work is required after purchase.

Genuine safety lanyard

[Disclaimer]
As these are genuine parts, prices may change without notice.

[SEA-DOO] SP 587 (1989-1991)

[Reason for outlet sale] Special price to replace inventory.

*Genuine, new, unused SEADOO product *Warehouse stock, so packaging may be defective *Special offer, so returns and exchanges not accepted

●SEA-DOO genuine relay 30Amp

●This grip has an ergonomic design that allows you to control the machine more easily and aggressively.

●This is a genuine grip adopted by SEA-DOO from 2016.

●Easy to replace the standard grip for Sea-Doo 1999 and later *Excluding '14-'15 SPARK.

[Compatible] Sea-Doo 1999 and later *Excluding '14-'15 SPARK

[Contents] 1 piece on each side *1 piece is required on both sides.

[Installation] Bolts, washers, inserts, and caps are not included, so please use existing ones.

*The first photo is an image of the left and right grips.
*If you need one unit, please order one each for the left and right sides.

[SEA-DOO] SPX (1996)

[Reason for outlet sale] Special price to replace inventory.

*Genuine, new, unused SEADOO product *Warehouse stock, so packaging may be defective *Special offer, so returns and exchanges not accepted

●SEA-DOO genuine starter relay STARTER RELAY.

[Compatible models]
SEA-DOO 4-stroke / 2-stroke (580 650 720 800 951 engine)

[Compatible models] SEA-DOO
GTX / RXT *Model with iS (suspension)
RXT iS (2009-2016)
GTX iS (2009-2016)
GTX Limited iS (2009-2016)

*2017 GTX series (no suspension) model number: 280000472
*For 2017 GTX series (with suspension), please purchase part number: 280000587.

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications may change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

●Genuine ANODE ZINC SEA-DOO ♯271001813

[Compatible models] SEA-DOO RXT(-'09) / RXT-X(-'09)

[! ]
As this item is ordered from overseas, it may take a long time.
Detailed delivery date will be provided after ordering.

SEA-DOO genuine PWC cover.
Designed for a perfect fit and made with UV resistant fabric.

[Information regarding genuine products]
*This is a made-to-order item*
*This product is a genuine product and cannot be canceled or returned after ordering*

●When selecting a product, please be sure to check the following items before ordering.
Please carefully check 1. Manufacturer, 2. Model name (common name), 3. Model year, etc. before purchasing.
●About the displayed price
Prices and specifications may change without notice. The listed price may differ from the actual selling price due to manufacturer part numbers, price changes, etc. Please note that in that case, we will contact you before shipping.

●Genuine LIQUID SENSOR SEA-DOO ♯278002895

●SEA-DOO genuine wear ring 161mm

[Compatible with] RXT-X300/RXP-X300/GTX-L300

Safety Lanyard

Compatible with SEA-DOO's iControl system

*Please note that programming work is required after purchase, so please check before purchasing.

[Disclaimer] Prices of genuine parts may change without notice.

●SEA-DOO RXP255/215/GTI155/130 genuine steering cable

[SEA-DOO]
GSX RFI (1999-2001)
GTX RFI (1998-2002)

[Outlet reason] Special price for stock replacement

*SEADOO genuine, new, unused product
*There may be packaging defects as this is a warehouse stock item.
*Returns and exchanges are not possible as this is a special price item.
*A little rusty

●SEA-DOO genuine wear ring 159mm

[Compatible with] SEA-DOO 260/255/215

●SEA-DOO genuine wear ring 155mm

[Compatible with] SEA-DOO pump diameter 155.5

[Representative model] GTX 4-TEC ('02-'03)/951 model

■Material: Stainless steel
■Ball size: 1-7/8 inch
■Shaft diameter: 19mm
■Total length: 115mm

■Material: Stainless steel (including washer and nut)
■Load capacity: 3500LBS (approx. 1587kg)
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: 115mm

[Application] For corrosion prevention and rust prevention
[Contents] 350g

Effective in preventing corrosion and rust of engine parts during storage.
This is especially effective when storing for long periods of time.

SEADOO genuine product

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Large cooler that comes standard with FISH PRO.

●Other models can also be installed if the factory-installed LinQ system is installed.

●A multi-purpose accessory with a variety of fishing functions, including a storage pocket, a lid that can be used as a workbench, a rod holder that can be attached anywhere you like (*sold separately), and a trolling slot.

●Capacity: 13.5 gallons (51L)

● Cooler box with excellent rigidity and durability

[Capacity] 946ml x 12 bottles (case)

●Synthetic blend oil for ROTAX 4-TEC engines
●Developed to maximize the clutch performance of superchargers,
●Provides reliable engine durability even when the slot is fully open and under harsh conditions.

*Please be sure to use this oil for supercharger (SC) models.

●Can be looped and lashed in areas where there is no tightening allowance.

■Belt total length: 2000mm
■Belt width: 25mm

[Application] Deterioration prevention agent added to residual fuel
[Contents] 240ml

●Adding to remaining fuel during long-term storage prevents deterioration.
●Estimated usage: Approximately 1 bottle is used for 76L of fuel.

*Liquid color and packaging are subject to change without notice.
*Since this is a genuine product, we cannot accept returns or exchanges.

Developed to maximize the performance of the Rotax engine
Primix coolant.

■Capacity: 946ml
maintenance supplies

■Material: Stainless steel
■Ball size: 1-7/8 inch
■Shaft diameter: 25mm
■Total length: 115mm

■Used when attaching the ball mount to the hitch member.

■Helps prevent the ball mount from falling off and being stolen.

■As it is made of stainless steel, it is a rust-resistant item. (Brass steel inside the cylinder)

■Pin size: φ16mm×70mm

■TIGHT JAPAN, SUNTREX, SOREX, class III compatible

■Ball mount lock key with key

A cost-effective vest with a combination of soft neoprene material and a zipper on the front side that emphasizes the fit.
The neoprene material on both sides prevents chafing and is comfortable to wear.
It has a simple design that is easy to put on and take off.

OK as a marine sports vest for towing play such as wakeboarding, SUP, and banana boats!
Free one size

■Applicable chest size: Approximately 90-100cm

■Material: Chloroprene fabric PE foam, polyester, polyurethane

[Caution] This product is not applicable for ship inspections and is intended to assist with buoyancy during leisure activities in Shinagawa or the sea.
This is not a marine rescue life jacket approved by the Ministry of Land, Infrastructure, Transport and Tourism.

Wakeboarding Wakesurfing Kiteboarding Surfing Bodyboarding
SUP SUP Paddleboard Flyboard Snorkeling Trekking
Kayak Canoe Marine Sports Marine Activities Banana Boat
Windsurfing WAKEBOARD SURF WATERTOY Rubber boat ZUPBOARD
Sports Vest Impact Vest Segment

With this coupler grip, you can securely grip the tip of the trailer.
Even heavy trailers can be lifted without using a jack and can be easily attached to and detached from the hitch.
The arm part is made of stainless steel and is resistant to rust, and the grip part is made of rubber for easy grip.

■Mountable bolt pitch: approx. 74-79mm
(Mounting hole center - center size: approx. 75mm)
■Bolt diameter: Approximately 8-13mm

【please note】
Only the coupler handle and other items are not included.
Mounting bolts are not included.

■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: 115mm

The left and right lights flash alternately in red.

●Application: Flashlight
●Mounting screws are not included. Please prepare separately.
●Equipped with 20 LED lights
●Size: 101x50x26mm
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
If the light part is submerged in water, such as when a trailer is placed in water, water may enter the lamp and cause it to break.

■It is attached to the mount socket of the hitch member, and the ball mount can be attached with the cap attached.

■Openable cover cap.

■Compatible with: Class III (50×50mm square type)

■Material: Made of ABS

■In addition to fixing the jet handle pole, you can also freely adjust the length with the stopper part.

■Length: 100cm

●You can add hooks to trailers and trucks that do not have side hooks and hang fixed hooks such as tie-down belts.

●Clamp width up to 45mm.

●Steel PVC coating

■Compatibility: For Honda outboard motors (from 2001) 3/8” hose 8900-7 (17650-ZW9-003)
■Compatible with 9.5mm inner diameter hose

By installing this fitting, the connection to the fuel tank can be installed and removed with one touch.
It is used by securing it to a hose with an inner diameter of 9.5 mm using a clamp.

*The fitting for the tank side hose is part number: 99524.

【please note】
Can only be used with square hole type outboard motors.
Please note that some Honda outboard motors manufactured before or around 2001 have round holes instead of the square holes shown.

This is a fitting that is attached to the fuel tank of an outboard motor to take out the fuel.

■Type: Tank side fitting

■Compatibility: For Suzuki outboard motors (75hp or more) 1/4” NPT

■Tank part screw size: 1/4 inch diameter 13mm

* Regarding compatibility with SUZUKI outboard motors, even if the outboard motor is compatible, the caliber may be different and it may not be possible to use it. Please check the caliber size before making your selection regarding fitting compatibility.

●Anchor for trolling from rubber boats to small boats.
●You can adjust the size of the outlet and the binding part of the opening, so you can easily adjust the effectiveness. A stainless steel thimble is used to remove the twist.

■If it is too effective: Tie the eyelet between the hanging ropes at the opening. Narrowing the opening reduces effectiveness.
■When the effect is weak: Please tie the drain eyelet. Closing the drain will make it more effective.

【Product Specifications】
●Support: 16-20 Fort Boat
●Size: Maximum opening diameter 75φ x total length 150cm

【please note】
*The rope that connects the sea anchor and the boat (towing rope) is not included.
*Please prepare in advance before use.

●An electronic marine horn for ships.

●Emits a pleasant electronic sound with a lingering sound.

●The mounting hardware and screws are made of rust-resistant stainless steel.

[Product specifications]
■Model number: ESM-24
■Current consumption: 24V/2.5A
■Output: 110dB
■Weight: 950g
■Size: Width 191 x Depth 180 x Height 90mm (including bracket)