Battery MBTX9U Motobat Bike Motorcycle Initial Charged Ready to Use Maintenance Free MOTOBATT

[Compatible models]
KAWASAKI Jet Ski ALL Model
YAMAHA Marine Jet ALL model
SEADOO 4-stroke model (2018 or later) / SPARK(※)
*'18 -'20 RXP-X / '18-20: Not compatible with all GTI, GTR / '16-'17 SD models.
*Please use 30 for 4-stroke models up to 2015.

【compatibility】
■Yuasa:
YTX20, YTX20L, YTX20BS, YTX20HBS, YTX20LBS, YTX20HLBS, YTX20HLBSPW,
YTX20H, YTX20HL, YTX20HL-PW,
YB16A, YB16A2, YB16B, YB16B2, YB16HLACX, SYB16LB, YB16LA, YB16LA2,
YB16LB, YB16LB2, YB16CB, YB16CLB, YB16BCX,
GT16L-BS, GT16BS, CTX19-BS CTX19L-BS , GYZ20H, GYZ20L, GYZ20HL,YTX20L-BS,YB16CL-B
■DEKA: ETX16, ETX16L, ETX20, ETX20L
■ODYSSEY: PC535, PC625

【Product Specifications】
MBTX20U
■Size (mm): L:175 W:87 H:155
■Spacer (mm): Bottom: 20mm Side: 13mm
■Voltage (V): 12V
■Cold cranking ampere (CCA): 310 A
■Capacity (10HR) 21 Ah

●Patent: Quad flex terminal
Innovative terminal arrangement allows for flexibility in connecting aftermarket accessories.

●Innovative power balance
Batteries in the powersports market continue to face three problems.
1.Big vibration
2. High load at start-up
3.Load due to additional accessories
MOTOBATT's innovative power balance design overcomes these problems.
By reviewing the conventional cranking power (CCA) and emphasizing ampere hour (Ah),
Quick power recovery allows you to cope with repeated startups with extra power.

●AGM (absorbed glass mat) design
Classified as a dry type battery designed by AGM, it has a long life and there is no need to worry about leakage, so it can be used in harsh environments.
The plates inside the battery are encased in a glass mat soaked with electrolyte, so the contact surface is always maximized and protected from vibrations.
The self-discharge rate is much lower than that of the wet type, and deeper discharge is also possible.
Even if the battery runs out, charging will restore it without reducing performance.
80% of initial battery failures are due to incorrect injection of electrolyte.
MOTOBATT is optimally adjusted at the factory and can be installed right out of the box.

【Guidance】
Some MOTOBATT products include
A "spacer" is included, so please use it as necessary.

[Compatible models]
SEA-DOO 4-stroke (up to '15)
*Cannot be used with SPARK

■Since this is an instant-use battery, it can be used after injecting the electrolyte and leaving it for about 30 minutes.
■When using in low temperatures or if the product has not been used for a long period of time, please charge it for 1 to 2 hours before use.
*You can use it for a longer period of time by regularly maintaining it so that it does not drop below 12.3V.

■Calcium battery liquid refill type■Size: Width 170 x Length 130 x Height 195mm

■Voltage: 12V ■10-hour capacity: 30Ah ■Charging current: 3A
Weight: 9.31KG

■ Country of Origin: China

[Features]
Excellent self-discharge performance, long life, and starting performance
By making the electrolyte into a gel, we were able to improve the basic performance that is important for a battery.
.
●It will not leak even if it falls on its side! It is a gel battery with a cutoff function, so it will not leak even if it falls on its side .
No need to worry about leaks, etc. ●Maintenance-free
merchandise
Since the battery is shut off from the time of purchase, there is no need to inject/replenish battery fluid, so it is hassle-free.
Pay attention to the charging current.

*Initial charging time: 1 to 2 hours
*If the engine is difficult to start during cold winter temperatures or after the battery has been manufactured, charging will be necessary.

[Compatible models]
KAWASAKI Jet Ski ALL Model
YAMAHA Marine Jet ALL model
BRP SEADOO 4-stroke model (2018 or later) / SPARK(※)
*Not compatible with all '18 -'20 RXP-X / '18: GTI, GTR / '16-'17 SD models.
*Please use 30 for 4-stroke models up to 2015.

【set content】
1.MOTOBATT battery (MBTX20U)
2.Battery charger (MBPDCWB)

【compatibility】
■Yuasa:
YTX20, YTX20L, YTX20BS, YTX20HBS, YTX20LBS, YTX20HLBS, YTX20HLBSPW,
YTX20H, YTX20HL, YTX20HL-PW,
YB16A, YB16A2, YB16B, YB16B2, YB16HLACX, SYB16LB, YB16LA, YB16LA2,
YB16LB, YB16LB2, YB16CB, YB16CLB, YB16BCX,
GT16L-BS, GT16BS, CTX19-BS CTX19L-BS , GYZ20H, GYZ20L, GYZ20HL,YTX20L-BS,YB16CL-B
■DEKA: ETX16, ETX16L, ETX20, ETX20L
■ODYSSEY: PC535, PC625

【Product Specifications】
MBTX20U
■Size (mm): L:175 W:87 H:155
■Spacer (mm): Bottom: 20mm Side: 13mm
■Voltage (V): 12V
■Cold cranking ampere (CCA): 310 A
■Capacity (10HR) 21 Ah

●Patent: Quad flex terminal
Innovative terminal arrangement allows for flexibility in connecting aftermarket accessories.

●Innovative power balance
Batteries in the powersports market continue to face three problems.
1.Big vibration
2. High load at start-up
3.Load due to additional accessories
MOTOBATT's innovative power balance design overcomes these problems.
By reviewing the conventional cranking power (CCA) and emphasizing ampere hour (Ah),
Quick power recovery allows you to cope with repeated startups with extra power.

●AGM (absorbed glass mat) design
Classified as a dry type battery designed by AGM, it has a long life and there is no need to worry about leakage, so it can be used in harsh environments.
The plates inside the battery are encased in a glass mat soaked with electrolyte, so the contact surface is always maximized and protected from vibrations.
The self-discharge rate is much lower than that of the wet type, and deeper discharge is also possible.
Even if the battery runs out, charging will restore it without reducing performance.
80% of initial battery failures are due to incorrect injection of electrolyte.
MOTOBATT is optimally adjusted at the factory and can be installed right out of the box.

【Guidance】
Some MOTOBATT products include
A "spacer" is included, so please use it as necessary.

[PWC compatible model] SEA-DOO 4-stroke (~2015) *SPARK excluded

【compatibility】
■Yuasa:
Y60N24A, Y60N24ALB, Y60N24LA, Y60N24LA2, 12N24-3, 12N24-3A, 12N24-4, 12N24-4A,
YIX30, YIX30L, YIX30L-PW, YIX30L-BS, YIX30L-BS-PW,
YB30LB, YB30CLB, Y60N30LA, Y60N30LB, GYZ32HL, 52515, 53030,YB30CL-B
■DEKA: ETX30L, ETX30LA, ETX30
■ODYSSEY: PC925 (Side Mounted)

【Product Specifications】
MBTX30U
■Size (mm): L:166 W:126 H:175
■Spacer (mm): Bottom 17mm
■Voltage (V): 12 V
■Cold cranking ampere (CCA): 385A
■Capacity (10HR): 32Ah

●Patent: Quad flex terminal
Innovative terminal arrangement allows for flexibility in connecting aftermarket accessories.

●Innovative power balance
Batteries in the powersports market continue to face three problems.
1.Big vibration
2. High load at start-up
3.Load due to additional accessories
MOTOBATT's innovative power balance design overcomes these problems.
By reviewing the conventional cranking power (CCA) and emphasizing ampere hour (Ah),
Quick power recovery allows you to cope with repeated startups with extra power.

●AGM (absorbed glass mat) design
Classified as a dry type battery designed by AGM, it has a long life and there is no need to worry about leakage, so it can be used in harsh environments.
The plates inside the battery are encased in a glass mat soaked with electrolyte, so the contact surface is always maximized and protected from vibrations.
The self-discharge rate is much lower than that of the wet type, and deeper discharge is also possible.
Even if the battery runs out, charging will restore it without reducing performance.
80% of initial battery failures are due to incorrect injection of electrolyte.
MOTOBATT is optimally adjusted at the factory and can be installed right out of the box.

【Guidance】
Some MOTOBATT products include
A "spacer" is included, so please use it as necessary.

■Shipping to Okinawa Prefecture and remote islands in each prefecture is not possible.

[Compatible models]
KAWASAKI KAWASAKI *Excluding 550/650(-96) and 800X-2

SEA-DOO 4 stroke (16-) SPARK Spark

■Since it is a ready-to-use battery, it can be used for about 30 minutes after injecting electrolyte.
■If the product is at low temperatures or has not been used for a long period of time, please charge it for 1 to 2 hours before using it.
*You can use it for a long time by constantly maintaining it so that it does not fall below 12.3V.
*For model compatibility, please refer to [Click here for compatibility table] below the image.

●Maintenance-free battery, no need to replenish fluid.
●Calcium battery ■Size: Width 175 x Height 88 x Height 155mm

[Compatible models]
YAMAHA / SEA-DOO PWC (excluding 4-stroke models)

■Since it is a ready-to-use battery, it can be used for about 30 minutes after injecting electrolyte.
■If the product is at low temperatures or has not been used for a long period of time, please charge it for 1 to 2 hours before using it.

*We recommend supplementary charging after purchase.
When replenishing battery fluid, be sure to use distilled water or a special replenisher, as tap water may cause problems.

[Adaptation]
Compatible with 16CLB and 20LBS.

●It has been praised for its excellent ability and durability with a self-discharge rate of approximately 1/7 or less, as well as its high safety.
●It is called the ultimate deep cycle battery because it is ultra-compact and ultra-light, and it provides 100% of the performance of vehicles and boats.
It is possible to withdraw it.
※※In order to fit this ultra-small and ultra-light battery into the battery case of the hull, several types of foam pads of different sizes are also included, so you can adjust and install it.

[Size] Width 166 x Height 86 x Height 155 (mm)
[Weight] 1,640g

●A 5-pin BMS port is used exclusively for LFX lithium ferrite batteries, which monitors and diagnoses each cell during charging to always maintain the best balance. It also has an optimal storage mode to ensure that you can use your LFX until the end of its life.

【specification】
◆Charging current: 2A peak Maximum output: 30W
◆Input voltage: 100V.250V, 50/60Hz, AC single phase Charging type: CC/CV Voltage: 14.4V terminal ◆Size: Length 11.4 x Width 11.4 x Height 3.8 (cm)
Weight: 720g (excluding cable)

[Set contents]
Shorai BMS01-JP charger, AC input cord (for Japan), long cable for battery charging (12V), short cable for charging extension (12V), user guide

[Compatible models]
KAWASAKI KAWASAKI *Excluding 550/650(-96) and 800X-2

SEA-DOO 4 stroke (16-) SPARK Spark

■Since it is a ready-to-use battery, it can be used for about 30 minutes after injecting electrolyte.
■If the product is at low temperatures or has not been used for a long period of time, please charge it for 1 to 2 hours before using it.
*You can use it for a long time by constantly maintaining it so that it does not fall below 12.3V.
*For model compatibility, please refer to [Click here for compatibility table] below the image.

●Maintenance-free battery, no need to replenish fluid.
●Calcium battery ■Size: Width 175 x Height 88 x Height 155mm

[Compatible models]
KAWASAKI Jet Ski ALL Model
YAMAHA Marine Jet ALL model
SEADOO 4-stroke model (2016 or later) / SPARK(※)
*Please use 30 for 4-stroke models up to 2015.

[Compatibility] ■Yuasa
YTX20, YTX20L, YTX20BS, YTX20HBS, YTX20LBS, YTX20HLBS, YTX20HLBSPW,
YTX20H, YTX20HL, YTX20HL-PW,
YB16A, YB16A2, YB16B, YB16B2, YB16HLACX, SYB16LB, YB16LA, YB16LA2,
YB16LB, YB16LB2, YB16CB, YB16CLB

【Product Specifications】
MHTX20
■Size (mm): L:175 W:87 H:155
■Spacer (mm): Bottom: 20mm Side: 13mm
■Voltage (V): 12V
■Cold cranking ampere (CCA): 550A
■Capacity (10HR): 15Ah

Next-generation battery that follows the benefits of lithium-ion AGM batteries
Embedded PCB board inside, overcharge protection,
Over-discharge protection, cell balance, and temperature adjustment implemented in the battery itself

●Outstanding cranking power
●Excellent life cycle
●Cranking amperage that is not affected by the weather
●Uses quad terminal
*Since the main use is racing, please use it in an environment/model that can withstand high current.

【Guidance】
Some MOTOBATT products include
A "spacer" is included, so please use it as necessary.

【compatibility】
■Yuasa: YTX9-BS, YT12A-BS, YTZ12S, YTZ14S
■DEKA: ETX9

[Product specifications] MBTX9U
■Size (mm): L:151 W:87 H:105
■Spacer (mm): Bottom 5mm
■Voltage (V): 12V
■Cold cranking ampere (CCA): 160A
■Capacity (10HR): 10.5Ah

●Patent: Quad flex terminal
Innovative terminal arrangement allows for flexibility in connecting aftermarket accessories.

●Innovative power balance
Batteries in the powersports market continue to face three problems.
1.Big vibration
2. High load at start-up
3.Load due to additional accessories
MOTOBATT's innovative power balance design overcomes these problems.
By reviewing the conventional cranking power (CCA) and emphasizing ampere hour (Ah),
Quick power recovery allows you to cope with repeated startups with extra power.

●AGM (absorbed glass mat) design
Classified as a dry type battery designed by AGM, it has a long life and there is no need to worry about leakage, so it can be used in harsh environments.
The plates inside the battery are encased in a glass mat soaked with electrolyte, so the contact surface is always maximized and protected from vibrations.
The self-discharge rate is much lower than that of the wet type, and deeper discharge is also possible.
Even if the battery runs out, charging will restore it without reducing performance.
80% of initial battery failures are due to incorrect injection of electrolyte.
MOTOBATT is optimally adjusted at the factory and can be installed right out of the box.

【Guidance】
Some MOTOBATT products include
A "spacer" is included, so please use it as necessary.

[Compatibility] Yuasa: YTX7L-BS, YTZ8V

[Product specifications] MBTX7U
■Size (mm): L:114 W:70 H:128
■Voltage (V): 12V
■Cold cranking ampere (CCA): 115A
■Capacity (10HR): 8Ah

●Patent: Quad flex terminal
Innovative terminal arrangement allows for flexibility in connecting aftermarket accessories.

●Innovative power balance
Batteries in the powersports market continue to face three problems.
1.Big vibration
2. High load at start-up
3.Load due to additional accessories
MOTOBATT's innovative power balance design overcomes these problems.
By reviewing the conventional cranking power (CCA) and emphasizing ampere hour (Ah),
Quick power recovery allows you to cope with repeated startups with extra power.

●AGM (absorbed glass mat) design
Classified as a dry type battery designed by AGM, it has a long life and there is no need to worry about leakage, so it can be used in harsh environments.
The plates inside the battery are encased in a glass mat soaked with electrolyte, so the contact surface is always maximized and protected from vibrations.
The self-discharge rate is much lower than that of the wet type, and deeper discharge is also possible.
Even if the battery runs out, charging will restore it without reducing performance.
80% of initial battery failures are due to incorrect injection of electrolyte.
MOTOBATT is optimally adjusted at the factory and can be installed right out of the box.

★Compatible car models
This is for reference only and does not guarantee compatibility. Please check the installed battery carefully before purchasing. Others are compatible.
■Honda (car name/model)
Gyro canopy / TA02
Cabiner 50 stand UP / AF33
Spacey 125 / BC-JF04
Cabina 90 / HF06
Broad 90 / HF06
CBX125F Custom / JC-11,12
NX125/JD09
XLR125/JD16
Jade(/S) / MC23
Nighthawk / MC26
Rebel CA250 / MC13
Hornet / MC31
XL Degree / MC31
Zerbis / MC25
AX-1/MD21
CBR250RR/MC22
CBR250R/MC19
GB250 Clubman / MC10
SPADA VT250/MC20
VTR250/MC33
V-twin Magna / MC29
V25 Magna S/MC29
REBEL / MC13
CBR400RR /NC29
HORNET(CB600)

■YAMAHA (Vehicle name/model)
Sero XT225/3RW
Sero XT225W / 3RW5,4JG1,4JG2
Serrow 225S/2RW3

■KAWASAKI (car name/model)
BALIUS / ZR250A
D-Tracker / KLX250-J
D-Tracker / LX250E
GPZ250R/EX250F
KLE250 Aned / KLE250-A/A1A
KLE250ES / KLE250ES
KLX250ES/LX250G,F
KLX250/LX250E
KR250(S) / KR250A<> Super Sherper / KL250G,H
ZZ-R250/EX250H5
Balios II/ZR250B

■SUZUKI (car name/model)
Glass Tracker / NJ48A
Jebel 250 / SJ44A
Intruder LC250 / VJ51A
Marauder 250/NJ48A
ST250Etype/NJ4AA
ST250/NJ4AA
DR250S SHEM,SHEN / SJ44A
Jebel 200/SH42A
WOLF200/NH11A
RG200 Gamma / NH11A
DF200E/SH42A
Bang Bang 200 / BA-NH41A
DJEBEL200 (Jovel) / SH42A
Marauder 125 / NF48A
Jebel 125 / SF44A

【compatibility】
■Yuasa:
YB12BB2, YTX12BS, YTX12, YTX14BS, YTX14, YTX14L, YTX14H, YTX14HBS,
YTX14LBS, KMX14BS, YTX15, YTX15L, YTX15LBS
■DEKA: ETX12
■ODYSSEY: PC545

[Product specifications] MBTX12U
■Size (mm): L:151 W:87 H:130
■Spacer (mm): Bottom 5mm+10mm
■Voltage (V): 12V
■Cold cranking ampere (CCA): 200A
■Capacity (10HR): 14Ah

●Patent: Quad flex terminal
Innovative terminal arrangement allows for flexibility in connecting aftermarket accessories.

●Innovative power balance
Batteries in the powersports market continue to face three problems.
1.Big vibration
2. High load at start-up
3.Load due to additional accessories
MOTOBATT's innovative power balance design overcomes these problems.
By reviewing the conventional cranking power (CCA) and emphasizing ampere hour (Ah),
Quick power recovery allows you to cope with repeated startups with extra power.

●AGM (absorbed glass mat) design
Classified as a dry type battery designed by AGM, it has a long life and there is no need to worry about leakage, so it can be used in harsh environments.
The plates inside the battery are encased in a glass mat soaked with electrolyte, so the contact surface is always maximized and protected from vibrations.
The self-discharge rate is much lower than that of the wet type, and deeper discharge is also possible.
Even if the battery runs out, charging will restore it without reducing performance.
80% of initial battery failures are due to incorrect injection of electrolyte.
MOTOBATT is optimally adjusted at the factory and can be installed right out of the box.

【Guidance】
Some MOTOBATT products include
A "spacer" is included, so please use it as necessary.

■Compatibility: 12V battery, AGM, lead acid battery, gel battery
■IN: Automatic switching 120-240VAC - 50/60 Hz
■OUT: 12VDC 1.0A
■MAX CHARGE: 1.0A
■MAX VOLT: 14.8V
■Cap: Charging: 2-33Ah, Maintenance: ~80Ah

・Highly waterproof charger with IP68 rating
・9-step algorithm charging technology
・Overcharge protection
・Reverse polarity protection
・Spark prevention
・Maintain full charge

■Compatibility: 12V battery, lithium ion, AGM, lead acid battery, gel battery
■IN: Automatic switching 120-240VAC - 50/60 Hz
■OUT: 12VDC 2.0A
■MAX CHARGE: 2.0A
■MAX VOLT: 14.9V
■Cap: Charging: 2-100Ah, Maintenance: All sizes

・9-step algorithm charging technology
・Overcharge protection
・Reverse polarity protection
・Spark prevention
・Maintain full charge

Convenient when removing the battery.

-Size: Belt width: approx. 5cm, total length (circumference): approx. 62cm, diameter: approx. 31cm

[Product specifications]
●12V power can be easily extracted from the cigarette lighter socket and terminal.

●Compatible with taking out electric power! This is a new type of battery BOX whose main terminal has a 60A circuit breaker.

●In accordance with modern needs, it is also equipped with a USB charger socket.

●Equipped with a battery level gauge, so you can conveniently check the remaining battery level with the touch of a button without having to open the lid.

●Socket type: Cigarette lighter (1 burner), USB (2 burners)
●USB socket specifications: Output voltage (DC5V)/Output current (2.1A)
●Built-in breaker: 10A (cigar socket)/60A (main terminal)
●Breaker type: manual reset
●Compatible battery: For 105A or less
-External dimensions: W420 x D230 x H335mm
-Inner dimensions: W340 x D190 x H225mm
(There is a protrusion on the back of the lid to hold the battery in place.)

*If more than the specified current flows, the breaker will operate and shut down the current.
After tripping the breaker, wait a sufficient amount of time before pressing the reset button.

The rope had a hook and shackle on each end.
Specially processed rubber absorbs strong shocks, allowing for smooth towing.
It is a float type so it will float even if you throw it into water.
The bright colors also provide excellent visibility.
Unlike ordinary ropes, it is elastic, which helps prevent it from getting tangled in the pump case.

● Comes with a mesh bag for easy storage ● Rope length: 2800mm when retracted - maximum length approx. 6000mm

Just by attaching it, you can see the anchoring position at a glance, and it also helps prevent the rope from getting entangled.
Please use as a set with rescue anchor rope.
Funny characters that make you laugh are popular.
If you use it in layers, it will attract even more attention!
There is also a namespace (name field) to avoid mistakes.
■Size: Approximately 25 x 25cm (individual sizes vary)

【be careful】
If the rope is not made by TIGHTJAPAN, the marker may not be stable.
*The rope in the image is sold separately.

Mooring Jet Ski PWC Personal Watercraft Boat
boat ship anchor rope mooring marker landmark
water bike personal watercraft

essential cleaning kit

Foam gun and detergent set!

◆Set contents
・Form Gun Pro (SV-FG01) x 1
・JETRENU Purple 473ml (JR-1001) x 1

◆Product details
[Form Gun Pro]
- Ideal for cleaning cars, motorcycles, jet skis, windows, etc.
・Creates super foam that is effective against stubborn stains,
Maximizes the cleaning power of the cleaning solution.
・Highly foamed foam envelops dirt and dust during cleaning,
It gently washes your car without causing any scratches.
・By connecting directly to a normal hose adapter and spraying,
You can easily clean it at home as well as on the go.
■Equipped with 2-way easy switching function: super foam and water cleaning
■Tank capacity: 240ml

[Jet Renew Purple]
First landing in Japan! This is a series of cleaning items specifically for personal watercraft and PWCs, born in California. Different colors have different uses to keep the hull beautiful. It can be used not only for personal watercraft, but also for cars, boats, motorcycles, etc.
This product (purple) is a basic cleaning and waxing product. A small amount produces surprisingly rich lather, removes dirt from boat hulls and trailers, creates a glossy finish, and provides long-lasting UV protection.
We recommend that you use this 473ml size first. It's just the right amount to use up in one season. You can also use it to take care of your car or bicycle. If you are using the series for the first time, please purchase this.

【how to use】
Pour about 30ml of this product into an empty bucket, dilute it with water, and polish the hull with a sponge or soft brush. When using a foam gun, dilute it to your desired ratio (e.g. 2 parts water: 1 part detergent).
It is a rich foaming detergent that is highly recommended to be diluted and used with a foam gun. It also has a strong, pleasant scent typical of American products. From the moment you open the package, you can feel the gorgeous scent. This is a product that is understandably popular in its home country.

【Notes】
1. Please keep out of reach of children. 2. Please use gloves, mask, goggles, etc. to protect your body. 3.If swallowed, drink a glass of water and seek medical attention immediately. 4. If it gets into your eyes, immediately rinse with plenty of water. 5. If it comes in contact with your skin, wash it off immediately.