Collection: 純正/社外 部品

[Applicable models] KAWASAKI 650/750/800

●It has better vibration absorption properties than the genuine product and has improved sealing.
●This gasket is more economical than genuine products.
●It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.
●Top grade gasket made in Japan

[Adaptation] KAWASAKI 750/800
[Quantity] 1 piece

Compared to the genuine base gasket, the surface has been specially processed to improve sealing performance.
In addition, the special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, it is made of metal, so there is no chance of tearing during maintenance.
This is a high-performance gasket that is more economical than genuine products.

[Applicable models] KAWASAKI 650/750/800
[Quantity] 2 pieces

The highest quality gasket made in Japan. It has better vibration absorption and tighter sealing than the genuine product.
This gasket is more economical than genuine products.
It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.

Used for joints of independent wiring in campers, trailers, etc.
The main body can be fixed, and can be easily attached and detached with one touch.

●Cable used
Core diameter: ~5mm (17sq)
Allowable current: 50A

Jet stand for small boats and jet skis.
This product consists of a metal frame with four durable casters.

The width can be changed in 3 steps: 12 inches, 16 inches, and 20 inches, and the tilt angle can be freely adjusted.
It also comes standard with a carpeted bunk to prevent slipping.

Equipped with a dual brake system, it can be used for multiple purposes.

*Please note that this boat platform is only intended to be moved around the site by hand, and any damage caused by towing it by car, installing it on a loaded vehicle, or transporting it will not be covered by claims.

*This product is used to lower a boat that has been fished with a harness or sling to our dock and move it around the facility. Please note that the design of this product does not support lateral movement (movement by pulling/sliding the hull) from the trailer to the berth or from the beach stand to the berth.

■Product size: 86×121×48cm
■Weight: 29kg
■Maximum loading capacity: 450kg
■4 casters (2 wheels with stopper)
■Assembly type (with English assembly manual)

KAWASAKI 750/800/900/1100/1200

This is a gasket with extremely high adhesion.
paper type gasket
Excellent oil and antifreeze resistance.

[Adaptation] KAWASAKI 750/800/900/1100/1200
[Quantity] 1 piece

Paper type gasket.
This gasket has better vibration absorption than the genuine product and has very high adhesion.
It has high compressibility, excellent resistance to stiffness, oil resistance, and antifreeze resistance.

[Adaptation] KAWASAKI 750/800/900/1100/1200
[Quantity] 1 piece

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

●This is a replacement terminal.

■Compatible with: Class III hitch ball mount socket 2 inch square type
■Material: Plastic (chrome plated)

It is a mount cap.
The material is made of plastic with a chrome plated finish, making the hitch member look stylish.

*There are slight individual differences in the size of the mounting part.
*Please note that there may be slight scratches during the manufacturing process.

[Adaptation]
External manifold (compatible with R&D, FACTORY PIPE, ETC, etc.) and KAWASAKI 650

●This gasket is more economical than other companies' products and genuine products.

[Applicable models] YAMAHA 4 stroke 1800cc

[Compatible] Product number: JL012 (Manufacturer product number UJ-74) Oil filter wrench
[Material] Steel
[Size] 74φ

[Compatible models] KAWASAKI / YAMAHA

[Compatible] Product number: JL007-1, JL013 Oil filter wrench
[Material] Steel
[Size] 65φ

●An oil-resistant type NA sheet that has a high compression rate, excellent resistance to mating surfaces, and exhibits high sealing performance against both oil and moisture.

●It has better vibration absorption than the genuine product and has improved airtightness. Excellent oil and antifreeze resistance.
Excellent sealing properties against oil, moisture, and antifreeze.

■Kit contents
・EVA mat x 1
・Gunnel hook x 2
・Lashing belt with ratchet x 2

*This kit does not include gasoline cans*

●Lashing kit for securing stainless steel cans to the rear deck of PWC.
●A high-quality EVA mat and lashing belt are included to prevent scratches on the hull when securing carrying cans.
●The EVA mat is CNC-processed and designed to prevent the tank from shifting.
●Both the ratchet part and gunwale hook part are made of stainless steel to prevent rust.
- By installing it, you can stack vertical gasoline cans (JL15006-20/25, etc.) on the rear deck.

*Gasoline cans are not included in the product.
*Space is required approximately 300mm before and after the deck surface.
*Cannot be used on boats with an R-shaped gunwale.

Nozzle hose for stainless steel portable cans

■ Total length: 250mm
■Product numbers for which compatibility has been confirmed: JL15006-20, JL15006-25
*This product is shorter than the nozzle hose that comes with the JL15006 stainless steel portable can. Please check the size.

Aluminum cap for stainless steel cans

■Material: Aluminum
■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

Bent bolt for stainless steel cans

■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

Great value 2 piece set sale

UN standard certified product Fire service law compliant product

Made of rust-resistant stainless steel, it will stay shiny even after many years of use.

●Uses a large handle for smooth operation during refueling.
●The poly injection nozzle can be stored inside when not in use.
●It has three handles with a unique structure, so it can be carried by one person or by two people from the left and right sides.

[Product specifications]

■Material: Body/stainless steel Cap/aluminum
■Size: Width 255x Length 360x Height 320mm
■Accessories: Aluminum cap, nozzle hose, vent bolt (all assembled)
■Instruction manual

[Repair parts] Refueling cap, nozzle hose, and vent bolt (ventilation screw) are also sold separately.

UN standard certified product Fire service law compliant product

Made of rust-resistant stainless steel, it will stay shiny even after many years of use.

●Uses a large handle for smooth operation during refueling.
●The poly injection nozzle can be stored inside when not in use.
●It has three handles with a unique structure, so it can be carried by one person or by two people from the left and right sides.

[Product specifications]

■Material: Body/stainless steel Cap/aluminum
■Size: Width 255x Length 360x Height 320mm
■Accessories: Aluminum cap, nozzle hose, vent bolt (all assembled)
■Instruction manual

[Repair parts] Refueling cap, nozzle hose, and vent bolt (ventilation screw) are also sold separately.

A versatile mixer that can perform washing and mixing at the same time.
Please use by connecting the water hose and attachment.

If you put water or undiluted solution into the detergent tank, it will be diluted and squirted out.
There is a scale on the cup, making it easy to measure the liquid.
You can leave the water running, so when the inside of the tank becomes transparent, it's a signal that it's done.

You can switch between water and foam (mixing mode) with the switch on the lid.
The foam can be adjusted to three levels: small, medium, and large, and the amount of foam can be adjusted according to the purpose.

■Water/foam (mixing) switchable
■Foam (mixing) mode: 3 levels of adjustment
■No STOP/OFF function

It is a useful item that can be used in many other ways.

★Add salt corrosion inhibitor...
Flushing of jet skis, outboard motors, in-boat engines, etc.

★Connect to a high pressure washer...Clean screen doors and shutters

★Connect to a watering nozzle for watering plants, sprinkling water, showering pets, cleaning windows, etc.

[Compatible with] YAMAHA 760/700
[Quantity] 1 piece
Ф48

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

[Adaptation] YAMAHA 760/700
[Quantity] 1 piece

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

[Adaptation] YAMAHA 760/700/650
[Quantity] 1 piece

Special processing on the gasket surface allows it to be used several times.
Compared to the genuine paper type, this gasket is made of metal so it won't tear during maintenance.
It is also a gasket with higher performance than the genuine product.
This gasket, manufactured using a special manufacturing method, has approximately 5 times the sealing performance compared to conventional paper types.
It has received high praise from overseas due to its unique Japanese manufacturing method.

Convenient when removing the battery.

-Size: Belt width: approx. 5cm, total length (circumference): approx. 62cm, diameter: approx. 31cm

●A set of 3 replacement hoses for oil extractors (product numbers: JL03148/JL03168).

[Applicable models] KAWASAKI ULTRA300/310 series
(*Equivalent to genuine part number 16097-0007)

External oil filter

Compared to genuine products, it is cheaper and has better cost performance.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.
However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Compatible models] YAMAHA
SHO / FX CRUISER SHO / FZS / FZR / VXR / HO(09~)
Displacement 1800cc or more
(*Equivalent to genuine product number 69J-13440-03)

●External oil filter

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Information] Please use part number: JL16006 for removal.

[Compatible models]
●KAWASAKI 4 stroke ALL
*Cannot be used for ULTRA310/300

●YAMAHA 4 stroke ALL
*FZR/SHO/FZS and other hulls with a displacement of 1800cc or more cannot be used. Please use genuine NO.69J-13440-03.
*External oil filter (*equivalent to genuine product number 5GH-13440-30)

●New features have been added to the conventional oil filter.
●A special design that takes into account the oil flow rate and a strong magnet inside the filter effectively absorbs sludge (iron powder) mixed in the oil.
●Installation is the same as a conventional oil filter.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Compatible models] =============================================
●KAWASAKI 4 stroke (※)
*Cannot be used with ULTRA300/310, genuine NO.16097-0007 is best.
*External oil filter (*equivalent to genuine part number 16097-0008)
-------------------------
●YAMAHA Yamaha 4 stroke (*)
*FZR/SHO/FZS and other hulls with a displacement of 1800cc or more cannot be used. Please use genuine NO.69J-13440-03.
*External oil filter (*equivalent to genuine product number 5GH-13440-30)
================================================== ========

This is an aftermarket oil filter. It is a great value at a lower price than the genuine product.
Regarding the oil filter... Inside the engine, sludge is generated from impurities contained in fuel and oil, and metal powder is generated due to friction between the cylinder and piston rings. The engine oil can wash away the generated substances, allowing the engine to continue working normally.
However, if the engine oil is used repeatedly over a long period of time, dirt and deterioration will occur in the engine oil, so it is cleaned through a filter to prevent dirt from re-adhering and deterioration.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

It has excellent water and oil resistance and can be used underwater without using adhesives.

Taking advantage of its excellent insulation properties and excellent flexibility, stretchability, and elasticity,
Perfect fit for any shape.
Highly airtight and highly adhesive, ideal for preventing water leaks, air leaks, and waterproofing.

●High heat and cold resistance operating temperature range (℃): -56 to 260.

This is a very convenient terminal for connecting wires and for interrupting.

[Quantity] 6 pieces 1 set

■Material: Brass
■Specifications: 1/4 straight (threaded part 13mm: P1.25: outer diameter 13.5mm)

■Material: Brass
■Specifications: 1/8 straight (threaded part 10mm: P0.9: outer diameter 10mm)

■Material: Brass
■Specifications: 1/8 blind (screw part 10mm: P0.9)

When changing the cooling hose routing or adding a bypass line,
Used to close holes that are no longer needed.

This is an adapter used when flushing the engine.

[Applicable] Hose inner diameter 19~20φ
【size】
●Screw: 26mm
●P: 1.75mm
●Outer diameter: 20mm
●Inner diameter: 13mm

[Applicable] Hose inner diameter 16 to 18φ
[Size] Inner diameter 14mm Threaded part outer diameter 26mm

The models below can be easily connected to a water hose with a hose adapter.
SEADOO
●Models equipped with 951 engine (RX, XP, GTX, etc.)
●GTX4-TEC ~RXT

*This is the same product as the conventional GES0616 gray.

This is a fuel hose used to connect between the fuel tank, primer, and engine.

■Total length: 30m
■Hose inner diameter: 3/8 (9.5mm)

■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Material: Steel
■Ball size: 1-7/8 inch
■Shaft diameter: 25mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Material: Steel
■Ball size: 1-7/8 inch
■Shaft diameter: 19mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Type: Long type
■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 135mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 23mm

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 135mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 25mm
*Please note that there are individual differences in size.

■Type: Long type
■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 165mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 46mm
*Please note that there may be individual differences in size.

Steel neck 50mm

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: Approximately 165mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 50mm

*Please note that there are individual differences in size, so please use this as a guide.

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 165mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 50mm

*Please note that there may be size errors due to individual differences.

■Used when attaching the ball mount to the hitch member.

■Easy to install, can be installed with one touch, and locked with a clip.

■Class II (32x32) lock pin for ball mount

■As it is made of stainless steel, it is a rust-resistant item.

■Size: Ф12.7mmx65mm

■Used when attaching the ball mount to the hitch member.

■Easy to install, can be installed with one touch, and locked with a clip.

■Lock pin for ball mount

■Made of steel plating

■TIGHT JAPAN, SUNTREX, SOREX, class 3 compatible

■Size: Ф16x75mm

■7-pin type wiring socket for lights on the towing vehicle side

■This item is made of durable reinforced plastic instead of the conventional aluminum part.

■Made of reinforced plastic, it is inexpensive but has sufficient strength and is also extremely lightweight.

■Material (body): Reinforced plastic

■Compatible with: TIGHTJAPAN, SOREX, SUNTREX

*Wiring sold separately