Collection: 純正/社外 部品：社外部品

*Compatible with 2 manufacturers of Kawasaki YAMAHA models

The weight of the float on the life vest side prevents the cord from going wild.
When new, it will remain buoyant even if left in an aquarium filled with water without waves or wind for a week.

■Size: Total length approximately 40cm, approximately 1m30cm when extended

【please】
*Before use, please check the cord for cracks and the crimped part from time to time.
*For SEADOO models, please select UFL2201A, which is compatible with all manufacturers.

KAWASAKI
SEADOO

●Quantity: 1 piece
●Hose spigot: 17mm
●Material: Made of billet aluminum
●Color/4 colors available: Silver, Red, Black, Green

The hose outlet is a one-touch joint connector type.
Can be used in conjunction with general one-touch connectors.

【Guidance】
Flushing adapter for engine flushing (water washing)
Can be used in conjunction with UNLIMITED billet flush fitting [UL53006].

■Total length: 50cm long pick tool
■Includes: Leather pick tool cover included

Quickly picks up plastic, tree branches, aquatic plants, etc. that get caught in the impeller while driving without having to remove or remove the intake gate.

●An adapter used when washing engines such as KAWASAKI and SEA-DOO.

●Can be used with Salt Away's dedicated mixer with just one touch.

[Compatible models] Sea-Doo
SEA-DOO 4-stroke 260/255/230/215/185/155/130 horsepower model (up to 2017)
*Excluding SPARK 2018 and later models

●Genuine part number OEM 420956741

■SGS external oil filter + external O-ring ■This is a set product of oil filter + O-ring.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

Insert into the male flasher adapter with one touch,
If used with a mixer, it can be used on KAWASAKI and SEA-DOO boats.

During engine flushing using salt remove fluid
This product connects the hull and mixer and washes with water.

[Adaptation] External handlebar (bar diameter: 22.2mm)

[Product name] LOCK GRIP 'LOGO'
[Size] 130 x 29mm
[Lock ring] Red
[Included] Plastic end
Based on the concept of easy grip, we have achieved high grip strength while ensuring cushioning properties.
The lock part is made of aluminum to prevent the grip from coming off. No adhesive required!

*You can enjoy your favorite color coordination with optional items sold separately.
*Photo 3...This is an image of the use of the lock ring (product number: UL32003) and end cap (product number: UL32004).

[Introduction of optional items (sold separately)]
●Lock ring 2 pieces (product number UL32003)
●End cap 2 pieces (product number UL32004)

UL32001BK Black
UL32001WH White
UL32001GR Green
UL32001OR Orange

[Compatible models] SEA-DOO
●300 horsepower model & 2018 and later models (*Genuine product number 420956744 equivalent product)
●260/255/230/215/185/155/130 horsepower model (-2017) (*Genuine part number 420956741 equivalent)

*Excluding GTI90/SPARK

・・・
This is an aftermarket oil filter with excellent cost performance at a lower price than the genuine product.
■Accessories: 1 each of thin O-ring, thick O-ring, and small O-ring

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, due to repeated use over a long period of time, engine oil becomes dirty and deteriorates.
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

■For MIKUNI ■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use. Please note.

006-9050 50
006-9052 52.5
006-9055 55
006-9057 57.5
006-9060 60
006-9062 62.5
006-9065 65
006-9067 67.5
006-9070 70
006-9072 72.5
006-9075 75
006-9077 77.5
006-9080 80
006-9085 85

[Compatible] External handlebar (bar diameter: 22.4mm)

[Product name] LOCK GRIP 'Honeycomb'
[Size] 130 x 29mm
[Lock ring] Black (color cannot be selected)
[Included] Plastic end

With the concept of easy grip, the inside of the grip features a honeycomb pattern and logo.
A stylish and high grip is achieved with a non-slip diamond pattern while ensuring cushioning properties.
The lock part is made of aluminum to prevent the grip from coming off. No adhesive required!
By using the grip ring and end cap (sold separately), you can create a stylish look around the handle.
[Precautions when installing] Apply grease to the lock ring tightening bolt to prevent it from sticking, and be careful not to overtorque when tightening the bolt.

*You can enjoy your favorite color coordination with optional items sold separately.
[Introduction of optional items (sold separately)]
●Lock ring 2 pieces (product number UL32003-all 6 colors)
●End cap 2 pieces (product number UL32004-all 6 colors)

UL32007RD Red
UL32007GY Gray
UL32007GR Green

【correspondence】
KAWASAKI Kawasaki

This is a type of lanyard that can be attached to a vest.

[Lanyard color]
A2109ST black
A2103ST Red
A2101ST Green
A2097ST Yellow
A2102ST light blue
A2196ST Silver

- Enhances the whistle from the supercharger at idle, creating a nice hiss when you lightly crack the throttle and a supersonic charger noise when you back off the throttle at full boost.

- Can be installed in 5 minutes and includes a block-off cap for the air box and a low-profile hose clamp for attaching the vent hose.
・Instructions are also included

*The last few pictures are just to show how it will fit into the vent, the real vent is not included.

Handlebar exclusively for UNLIMITED runabout models

Use it by wrapping it around the handlebar.

■Length: 23cm

It is standard equipment on the following UNLIMITED handles.
Product number:
UL31002
UL040
UL040CA
UL040CA-2
UL31001

●This is a gasket parts set for overhauling the carburetor.
●Please use it for regular cab overhaul.
●It is for one cylinder.

Please choose from below.

----------------------------------------------
[1] 006-346 MIKUNI for SBN 38/44/46mm
[Compatible models]
SEA-DOO: 580/650/720/800(GTI/SPX)
YAMAHA Yamaha ：650/700/760/1100/1200 Non-Power Valve(SJ/GP)
KAWASAKI Kawasaki: Sxi/SxiPro/800X2/800SX-R

[2] 006-352 I-series for MIKUNI S-BN
[Compatible models]
YAMAHA Yamaha: GPR/GP800/GP800R/XL-L/XLT (66E/66V/67X)

[3] 006-351 MIKUNI SBN Seadoo for I-series
[Compatible models]
SEA-DOO: 951

【correspondence】
YAMAHA

Even if you drop it in water, it will float, which is very convenient.
Please use according to your wrist size.

[Float color] x [Lanyard color]
A8136 Black x Silver
A8158 Red x Black
A8139 Blue x Black
A8160 Silver x Black

[Compatible with] YAMAHA Yamaha
760/800/1100/1200/1800 (*700 is not possible)

●The hose spigot is a one-touch joint connector type, so it can be used in conjunction with general-purpose one-touch connectors.

●When flushing the engine using salt remove liquid, it can be used in conjunction with the mixer to connect the hull and mixer.

●Made of aluminum billet

■Material: Aluminum
■Hose piercing port: Ф13mm
■Exit hole: Ф10.5mm
■Mounting hole: Ф16mm

UL56009SL Silver
UL56009BK Black
UL56009GR Green
UL56009BL Blue
UL56009RD Red

[SEADOO] RXT-X300 (2019-), RXT-X 325 (2024-)

●A newly released deck mat for SEADOO RXT-X from UNLIMITED.

In addition to the excellent cushioning provided by the two-layer mat structure,
Because we incorporate the latest laser processing technology into our design,
Not only does it eliminate the surface tension of water and allow for smooth drainage of the deck,
We have created a durable mat that provides excellent grip even when wet.

The double-sided tape used is not the conventional 3M tape,
We use the new PSA2, which is based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesiveness.

● Comes with double-sided tape

[Disclaimer]
Due to the nature of the product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that we cannot accept claims for fading or discoloration.

[Regarding out-of-stock items]
We can order it from the manufacturer, so please contact the JSPTOKAI online shop.
Please note that if we need to order a product, it may take 2-3 months for it to be delivered.
Please note that we cannot accept cancellations after an order has been placed as this is a made-to-order product.

GLOVE BOX LATCH

SEA-DOO genuine part number (OEM): 264000133 etc.

●Glove box latch for SEA-DOO

●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

*The location used is number 1510 in the third photo.

【correspondence】
KAWASAKI
YAMAHA
SEA-DOO (Push type switch)
*Cannot be used with SEA-DOO's DESS system.

[Float color] *The lanyard part is all black
A3220 Black
A3221 Red
A3222 Blue
A3223 Yellow

Please select your desired prefecture type.

●JCI compatible products (small ship court equipment)
●Contents: 1 set of 2 pieces ●Size: Width approx. 100 x Height approx. 80mm

[Reason for outlet sale] Special price for inventory clearance

*Brand new, unused product *Clearance sale items may be dirty, faded, or have weak adhesive *Returns and exchanges are not accepted due to the sale price

●JCI compliant products (forensic equipment for small vessels)
● Contents: 10 sheets per set ● Size: 100mm wide x 80mm long

[Compatible models] YAMAHA Marine Jet 760/1100/1200/1300/4 stroke (700 not available)

The hose outlet is a one-touch joint connector type.
General-purpose one-touch connectors can be used.

When flushing the engine using salt remove fluid,
When connecting the hull and mixer, use this product and wash with water.

[KAWASAKI]
ULTRA310(-'21)/300/260/250/LX

- Deck mat for Kawasaki ULTRA310/300/260/250/LX newly released by UNLIMITED.

●In addition to the excellent cushioning properties of the two-layer mat structure,
Designed using the latest laser processing,
Of course, it eliminates the surface tension of water and makes the deck drain smoothly.
We have created a durable mat with high grip even when wet.

●The double-sided tape used is not the conventional 3M tape,
We use a new PSA2 based on 3M 9786, which has excellent wrinkle resistance, durability, and adhesion.

●With double-sided tape

[Disclaimer]
Due to the nature of product materials and colors, certain colors (green, orange, red, pink, yellow) may fade over time and with use.
Please note that complaints regarding discoloration or fading will not be covered.

[Regarding out-of-stock products]
It is possible to order from the manufacturer, so please contact the JSPTOKAI mail order shop.
Please note that it may take approximately 2-3 months for items to be ordered.
Please note that we cannot accept cancellations after an order has been placed as it is manufactured to order.

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 2 pieces 1 set ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

*Standard size [ULT131-M] has white logo *Large size [ULT131-L] has red logo

Trailer parts boat trailer lashing belt ULT131BK

■Pattern: Diamond ■Color: Black ■Size: 89 x 119 cm

This reinforced mat eliminates the surface tension of water, allowing for smooth drainage from the deck and providing excellent grip.
Since it is a sheet type, it can be cut freely to create your own original design.

Note: Adhesive is required for attachment.

[Adaptation] External handlebar (bar diameter: 22.2mm)

[Product Name] Lock Grip Ergo
[Size] 130 x 30mm
[Lock ring] Black
[Included] Plastic end

The ergonomic structure is designed to fit in the palm of your hand for comfort while riding. The wide design disperses localized pressure on the palm, reducing strain on the hands and arms.
The grip part is made of soft rubber, and the outer periphery is made of grooved non-slip rubber to improve grip.
This ergonomic grip has a fit that sticks to your palm and a soft grip.
The lock ring is made of aluminum, and by tightening the screw, it prevents the grip from coming off the handlebar.
The lock part is made of aluminum to prevent the grip from coming off. No adhesive required!

[Precautions when installing] Apply grease to the lock ring tightening bolt to prevent it from sticking, and be careful not to overtorque when tightening the bolt.

【option】
By attaching the optional color grip ring and end cap (sold separately), you can create an even more stylish look around the handle.
●Lock ring 2 pieces (product number UL32003-all 6 colors)
●End cap 2 pieces (product number UL32004-all 6 colors)

UL32008BL Black/Blue
UL32008GR Black/Green
UL32008GY Black/Gray
UL32008RD Black/Red

UNLIMITED lock-on grip series
*ODI grip cannot be installed on other manufacturers.

[Product name] LOCK RING

[Material] Made of aluminum
[Quantity] 2 pieces 1 set

Optional lock ring for UNLIMITED lock grip.
You can dress it up by matching the color of the throttle lever and handlebar.
The lock part is made of aluminum to prevent the grip from slipping out.

UL32003SL Silver
UL32003BK Black
UL32003GR Green
UL32003OR Orange
UL32003BL Blue
UL32003RD Red

[Adaptation] External handlebar (bar diameter: 22.2mm)

[Product Name] Rock Grip Splash
[Compatible] External handlebar
[Size] 130 x 29mm
[Lock ring] Red
[Included] Plastic end

The diamond pattern prevents blisters from forming on your hands, and has sharp teardrop-like cuts that make it easy for your fingertips to get caught and prevent slipping. The lock part is made of aluminum to prevent the grip from coming off.
No adhesive required!

*You can enjoy your favorite color coordination with optional items sold separately.
[Introduction of optional items (sold separately)]
●Lock ring 2 pieces (product number UL32003)
●End cap 2 pieces (product number UL32004)

UL32002BK Black
UL32002WH White

This spring is
Reducing the tension improves throttle response, but it also makes it more likely to burn due to vibration, etc.
If you make it stronger, it will have the opposite effect.
As the g number increases, the tension becomes stronger.

[Compatible models] SEA-DOO
SPARK
GTI SE 90
(*Equivalent to genuine product number 420956123)

This is an aftermarket oil filter with excellent cost performance at a lower price than the genuine product.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Applicable] SEA-DOO 4-stroke pump diameter 161mm (for 300/230 horsepower)

● BRP genuine part number 267000917

●SGS Wear●An inexpensive aftermarket repair part with performance equivalent to that of an original part.

[Disclaimer] Product colour may vary depending on time of arrival.

BELLOW

SEA-DOO genuine part number (OEM): 268000186 etc. IBR boots for SEA-DOO
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.
*The location used is number 50 in the third photo.

[Applicable models] SEA-DOO 4-stroke

●Genuine part number (OEM): 278003828 (old part number: 278002822)

●SGS 30Amp relay●This is an inexpensive aftermarket repair part with performance equivalent to the original part.

4Pin
The terminal in the photo is a set of 4 pins each for male and female.
This is the same type of coupler used by KAWASAKI and YAMAHA.

[Applicable models] KAWASAKI 650/750/800
[Quantity] 2 pieces

●It has better vibration absorption properties than the genuine product and has improved sealing.
●This gasket is more economical than genuine products.
●It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.
●Top grade gasket made in Japan

・We place more emphasis on hook-up performance than genuine or other brand ride plates, absorbing hooks from waves and strengthening straight-line stability on rough and unstable water surfaces that are easily affected by wind.

Compatible with 2014~2021 Kawasaki Ultra310
Fits 2012+ Kawasaki Ultra300
Fits 2012+ Kawasaki Ultra LX

●Soft type
●With 3/4 flange
●Size: Total length 120mm x outer diameter 32mm

[Compatible with] External handlebars *Cannot be used with genuine handlebars.

A glue-free grip that is very popular in America.
This type does not use adhesive for installation; it is fixed with a lock ring.

【please note】
The color of the ring and the design and shape of the cap may vary depending on the time of arrival. Please note.

[Adaptation] KAWASAKI Kawasaki

[Quantity] 1 piece

By replacing it with the genuine hull drain plug, you will be able to drain water inside the ship while planing.
The ball inside the product moves due to the inertia of the ship's hull, and during acceleration and deceleration, water pressure moves the internal ball to prevent water from entering the ship.

[Caution] *Please do not stop the vessel for long periods of time. (Drainage does not occur while anchored because there is no inertia)

[KAWASAKI]
UL46009RD
UL46009SL
UL46009GR
UL46009BK

[Compatible] Can be installed on runabout models *Depending on the arrival time, the logo may not be displayed. note that.

[Included] UL31100 bar pad included (pad length 230mm) *Color cannot be specified

【specification】
■Material: Aluminum ■Type: φ7/8" (22.4mm) standard ■Total length: 7900mm
■Handlebar clamp area: 170mm
■Grip end position: 110mm

The wide handle allows for aggressive riding.
The handlebar is made from aluminum alloy, which is also used as an aircraft material, to make it even stronger and lighter.
Also, the wide handle allows for easy cutting.
The grip position is lower than the stock handlebar, so you can maintain a low stance and lower your line of sight, allowing you to corner in the best position.

[Disclaimer] *Depending on the time of arrival, the logo may not be present.

■Compatible models: KAWASAKI 750/800

Digital CDI-R power unit.

Suitable for a wide range of users, including Sunday users, race users, and freestyle users.

Ignition timing is digitally controlled using a high-performance 8-bit microcontroller.
It is possible to switch between different ignition timings for MAP 1 to 4 using the built-in switch.
Since this is a race-specific model, the limiter has been cut.
The input line has been strengthened to accommodate high rotation speeds. In addition, the torque characteristics have been increased to high rotation speeds.
Compact design that fits neatly into the electrical box.
We have achieved unparalleled high durability.
■CDI: Made in Japan

【Guidance】
By using the optional lightweight duralumin flywheel (product number: JL-K8P-F), you can expect even more response and improved high rotation range.
(Set part number: UL21001-KF Total Loss Digital System Kit)

●UL14101: Inner diameter Ф60 x total length 70mm
●UL14102: Inner diameter Ф70 x total length 70mm

This is an exhaust coupler with excellent heat resistance, pressure resistance, and oil resistance.
Excellent cost performance and durability.

ON-OFF-ON 3-way rotary switch.
Two electrical components can be operated separately.
It can be used regardless of manufacturer model.
Their high quality and reliability are highly evaluated overseas.
■Produced in Japan

■Completely waterproof
■Cord length: 25cm
■Specifications: 12V 5A

[About installation] Hole drilling (Ф13.5mm) is required on the mounting part.

[Compatible models] SEADOO SPARK

This provides dramatically improved control when cornering and in rough conditions.
It can be installed by bolting onto the original holes.

[Compatible models]
YAMAHA GP1800(2017-2018)/GP1800R SVHO(2019-)

The intake gate is the part that serves as the inlet for the water flow that sends water to the pump case.
It has the effect of improving the grounding to the water surface.

[Compatible models] SEA-DOO
GTR230(-2019)
GTR-X 230(-2019)
*2020 model GTR230 is model number: RS16121.

The resonator between the muffler and water box
Bypass to increase exhaust efficiency.

●Easy to purchase and economical, essential for improving engine durability.

[Compatible models] KAWASAKI 800 / 750 (excluding 92-99Zxi) / 650 (86-96)
Kawasaki SC 650 1991-1995
Kawasaki SX 650 1987-1993
Kawasaki TS 650 1989-1996
Kawasaki X2 650 1986-1995
Kawasaki SS 750 1992-1997
Kawasaki SSXI 750 1993-1997
Kawasaki SX 750 1992-1995
Kawasaki SXi 750 1995-1996
Kawasaki SXI Pro 750 1998-2002
Kawasaki Xi Sport 750 1998-1999
Kawasaki SX-R 800 2003-2011

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

[Compatible model] YAMAHA 1200ALL(65U)

Yamaha GP1200 1997-1999
Yamaha SUV1200 2000-2002
Yamaha XL1200 1999

[Compatible model] SEA-DOO pump diameter 155.5mm
[Representative model] GTX 4-TEC ('02-'03)/951 model

●WSM wear ring 155mm
●OEM #271000653

【please note】
Colors may vary depending on arrival time. Thank you for your understanding.