Collection: accessories

[Compatible models] KAWASAKI
800SX-R
800X-2

[Product size]
●Outer diameter: 59.65mm
●Total length: 49.15mm
●Minimum inner diameter: 44mm
●Maximum inner diameter: 53mm

Horsepower increases by 1 horsepower just by attaching a sleeve to the stock exhaust line!
The maximum speed has also increased by more than 1km!
We promise improved response and experience in the medium and low speed range.

[Compatible models] KAWASAKI
Exhaust diameter Ф50mm
15F('09-)/ULTRA250X('08)/ULTRA260X/ULTRA LX('09-)

★The following model with exhaust port diameter Ф60mm is part number: JL14001.
STX series ('00-'07) *Excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300X/ULTRA LX('07-'08)

●Produces a stylish rear exhaust.
●Machined from aluminum (A6061) with excellent strength and corrosion resistance.
●Cover flange with chemically polished alumite processing and excellent design.

[Compatible models] KAWASAKI
JL14001: Exhaust port diameter Ф60mm
STX series ('00-'07) *Excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300/310/ULTRA LX('07-'08)

★The following model with exhaust port diameter Ф50mm is part number: JL14002.
15F('09-)/ULTRA250X('08)/ULTRA260X/ULTRA LX('09-)

●Produces a stylish rear exhaust.
●Machined from aluminum (A6061) with excellent strength and corrosion resistance.
●Cover flange with chemically polished alumite processing and excellent design.

[Compatible models] SEA-DOO
GTX-4TEC / RXT / RXT-X(-08)

Luxurious stainless steel buffed mirror finish.
Upgrade your visuals by replacing the cheap genuine hook with a polished one!

■Correspondence:
KAWASAKI 4 stroke model
SEA-DOO 4 stroke model

■Application: Tool to apply lubrication to the throttle body to prevent it from sticking.

●A must-have item for those riding in seawater!
●Inject lubricant to prevent the throttle body from sticking.

[About installation]
It is necessary to make a hole in the intake pipe using a drill. Install it in front of the genuine throttle body.

[Application] KAWASAKI 750/800 electrical box [Quantity] Blue 1 piece

By replacing the genuine plastic cap, it becomes an accent of the engine room.
With O-ring

[Applicable models] KAWASAKI *Excluding ULTRA 4 stroke (ULTRA310/300/260/250/LX)

About SEADOO boats and YAMAHA boats...
By installing and using the company's fuel filler (UL53005),
KAWASAKI "UNLIMITED billet fuel cap [UL030, UL036]" can be used

Machined aluminum

[Compatible models]
■Kawasaki: 750SX / SXi / SXi-Pro / 800X-2 / SX-R series (800SX-R / 1500SX-R)
■YAMAHA: 700FX / 700SJ

[About processing]
[1] When installing on a YAMAHA boat...If using a genuine YAMAHA lock: Machining of the lock part is required. A genuine KAWASAKI lock was purchased separately, and a genuine part lock assembly [27016-3703] was prepared and assembled.
[2] Use on KAWASAKI boats: Disassemble the genuine lock and assemble it to the product.

[Material] Stainless steel buffed finish

Excellent strength! Will not rust!
Replacing the original one will give the hull a luxurious feel and accent, making it more stylish.
The long hook design helps to securely lock the hood and prevent it from coming off.
The hook part can also be used with YAMAHA locks (processing required for installation)

[Note] Only the latch, internal parts of the lock part are not included.

[Compatible models] Seadoo 2015 and later models
Compatible with SEA/DOO RFID system (wireless digital encoding security system)
*SPARK is not compatible as it does not have the above system*

●Genuine part number (OEM): 278003400 etc.

[Note]
*Programming work is required after purchase.

●Exhaust nozzle for SE ULTRA310/300/260/250.

●This is a part to make the exhaust port look stylish.

●Exhaust nozzle for SE ULTRA310/300/260/250.

●This is a part to make the exhaust port look stylish.

●Exhaust nozzle for SE 800SX-R / 800X-2.

●This is a part to make the exhaust port look stylish.

●Exhaust nozzle for SE 800SX-R / 800X-2.

●This is a part to make the exhaust port look stylish.

●Exhaust nozzle for SE ULTRA310/300/260/250.

●This is a part to make the exhaust port look stylish.

A key chain to prevent small items such as keys from being submerged in water.

*As this is a genuine part, the price may change without prior notice.

●JL399 holder set belt and hook only.
●Convenient for simply lashing luggage onto the rear deck seat.
*It cannot be used on boats with a curved gunwale as the hook will be misaligned.

【set content】
Lashing belt (metal part made of stainless steel) x 1 piece
Gunwale hook (aluminum poly coating) x 2

●JL399 holder set bag only.
●Convenient for storing gasoline cans in your car or on the steps of a standing jet without getting dirty.
*Gasoline cans are not included.

■Compatible with: KAWASAKI Kawasaki
ULTRA 250/260/300/310 series

■Material: Stainless steel
■Application: Remove exhaust manifold

Existing wrenches interfere with the hull, making them difficult to work with and prevent bolts from turning smoothly.
A dedicated angle extension wrench to solve these problems.

"Mirror finish" with a focus on strength and visuals,
This is a product that will shine even in your tool box.

■Kit contents
・EVA mat x 1
・Gunnel hook x 2
・Lashing belt with ratchet x 2

*This kit does not include gasoline cans*

●Lashing kit for securing stainless steel cans to the rear deck of PWC.
●A high-quality EVA mat and lashing belt are included to prevent scratches on the hull when securing carrying cans.
●The EVA mat is CNC-processed and designed to prevent the tank from shifting.
●Both the ratchet part and gunwale hook part are made of stainless steel to prevent rust.
- By installing it, you can stack vertical gasoline cans (JL15006-20/25, etc.) on the rear deck.

*Gasoline cans are not included in the product.
*Space is required approximately 300mm before and after the deck surface.
*Cannot be used on boats with an R-shaped gunwale.

Nozzle hose for stainless steel portable cans

■ Total length: 250mm
■Product numbers for which compatibility has been confirmed: JL15006-20, JL15006-25
*This product is shorter than the nozzle hose that comes with the JL15006 stainless steel portable can. Please check the size.

Aluminum cap for stainless steel cans

■Material: Aluminum
■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

Bent bolt for stainless steel cans

■Compatibility confirmed product part numbers: JL15006-20, JL15006-25

Great value 2 piece set sale

UN standard certified product Fire service law compliant product

Made of rust-resistant stainless steel, it will stay shiny even after many years of use.

●Uses a large handle for smooth operation during refueling.
●The poly injection nozzle can be stored inside when not in use.
●It has three handles with a unique structure, so it can be carried by one person or by two people from the left and right sides.

[Product specifications]

■Material: Body/stainless steel Cap/aluminum
■Size: Width 255x Length 360x Height 320mm
■Accessories: Aluminum cap, nozzle hose, vent bolt (all assembled)
■Instruction manual

[Repair parts] Refueling cap, nozzle hose, and vent bolt (ventilation screw) are also sold separately.

UN standard certified product Fire service law compliant product

Made of rust-resistant stainless steel, it will stay shiny even after many years of use.

●Uses a large handle for smooth operation during refueling.
●The poly injection nozzle can be stored inside when not in use.
●It has three handles with a unique structure, so it can be carried by one person or by two people from the left and right sides.

[Product specifications]

■Material: Body/stainless steel Cap/aluminum
■Size: Width 255x Length 360x Height 320mm
■Accessories: Aluminum cap, nozzle hose, vent bolt (all assembled)
■Instruction manual

[Repair parts] Refueling cap, nozzle hose, and vent bolt (ventilation screw) are also sold separately.

A slip and scratch prevention protector made of EVA mat.
Made of the same material as the deck mat, it is essential for preventing scratches from ratchet parts such as belts.

■Quantity: 1 set of 2 ■Material: Made of EVA mat ■Size: 100 x 230mm

This is a JETPILOT wristband with Velcro fastening.
Use to secure the lanyard to your wrist.

[Compatible models] YAMAHA
VX (2021)
GP1800 (2021)

40 liters of large stern storage significantly increases the VX's storage capacity.

Molded with EVA foam for durability and weather resistance.
The interior has a mesh bottom for quick drainage.
There is a notch in the towing hook part, so you can use the hook without removing the storage.

■With side rod holder (2 locations)
■No tools are required for installation!
■Option (sold separately): VX cooler bag can be installed

*This product is not waterproof.

[Compatible models] YAMAHA
FX CRUISER HO(2021, 2020, 2019)
FX CRUISER SVHO(2021, 2020, 2019)
FXHO(2021, 2020, 2019)
FX LIMITED SVHO(2021, 2020, 2019)
FXSVHO(2021, 2020, 2019)

This FX stern storage is in addition to the FX's regular storage.
It has enough storage capacity to carry everything you need for long trips on the water.
In addition to its capacity of 50 liters, this is a masterpiece that shines with its excellent design.

Molded with EVA foam for durability and weather resistance.
The interior has a mesh bottom for quick drainage.
There is a notch in the towing hook part, so you can use the hook without removing the storage.

■With side rod holder (2 locations)
■No tools are required for installation!
■Option (sold separately): FX cooler bag can be installed

*The hull and product images are used images.
*This product is not waterproof.

[Compatible models] YAMAHA
GP1800(2017.2018) / GP1800R(2019) / GP1800R HO(2020) / GP1800R SVHO(2020)
VX(2015-2020)
VX CRUISER (2015-2020)
VX CRUISER HO(2015-2020)
VX DELUXE(2015-2020)
VX LIMITED(2016-2020)
VX-C(2019-2020)
VXR(2015-2019)
VXS(2015.2016)

40 liters of large stern storage significantly increases the VX's storage capacity.

Molded with EVA foam for durability and weather resistance.
The interior has a mesh bottom for quick drainage.
There is a notch in the towing hook part, so you can use the hook without removing the storage.

■With side rod holder (2 locations)
■No tools are required for installation!
■Option (sold separately): VX cooler bag (model number: F2X-F847U-V0-00)

*This product is not waterproof.

●A rod holder that attaches to the base of the BORIKA exclusive clamp mount (BK-FMCG).

●If you attach it to the base of the BORIKA exclusive clamp mount (BK-FMCG), you will be able to use 3 mounts.

●BORIKA Clamp Bearer & Mount.

●Rod holders, camera mounts, anchor locks, etc. sold separately can be replaced.

●As a holder when traveling to a fishing spot, or as a rod holder at a fishing spot.

●Installation is completed by simply inserting the knob nut onto the grab handle. No tools required.

●The direction and angle of the rod holder can be changed.

●In addition to the rod holder, the clamp mount can be replaced with camera mounts, anchor locks, etc.

*Some models such as STX and Spark may interfere with the seat slightly.

Rudder for watercraft or boats.
Easy to get on and off watercraft and boats.
Easy to install and easy to store.

■Total length approximately 1M

[Compatible models] 2022~ Kawasaki ULTRA series

The stern storage for KAWASAKI ULTRA (22~) is
In addition to regular storage, you'll have enough storage capacity to carry everything you need for long trips on the water.

Molded with EVA foam for durability and weather resistance.
The interior has a mesh bottom for quick drainage.
There is a notch in the towing hook part, so
You can use the hook without removing the storage.

In addition to its capacity of 27 liters, this is a masterpiece that shines with its excellent design.
■With side rod holder (2 locations)

【please note】
*It is necessary to install a stay on the main body. *This product is not waterproof.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

[Compatible] For SEA-DOO SPARK
*Equivalent to OEM part number: 278002843

A lanyard that attaches to your vest
It is more reasonable than genuine parts.

[Compatible models]
SEA-DOO
RXT-X300 (2018~)
GTR230 (2020)

●No drilling or other processing is required as it is bolt-on.

●A spring-retractable reboarding step that enhances playability and is convenient when reboarding from the water.

[Compatibility]
GTR230 (2020 and later) / GTI130 (2020 and later)

[Compatibility] GTR230 ('20-) / GTI130 ('20-)

●Convenient for storing small items in the large capacity storage of GTI hull models from 2020 onwards.

●A highly practical item that is easy to carry even when taken off the ship.

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

*A rod holder that can be attached to the optional LINQ COOLER 51L (#269800817).

●Upgrade hardware kit essential for using LinQ bag TUNNEL BAG (product number: 860201740) in seawater.

●LinQ hardware kit includes highly corrosion-resistant stainless steel parts

●Easy and quick installation

*Standard equipment for LinQ Cooler cooler box

[Compatibility]
RXT, RXT-X, GTX and WAKE Pro(2018)

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Wakeboard rack developed exclusively for SEA-DOO PWC

●One board can be installed
*Both sides (If you want to install 2 pieces, please purchase 2 pieces)

[About installation] Drilling required on the hull

●Convenient for storing small items in the large capacity storage of the ST3 hull model.

●Breathable front storage bin storage bag made of high quality synthetic mesh fabric.

●Equipped with carry handle.

●A highly practical item that is easy to carry even when taken off the ship.

●Quick installation fasteners securely hold bags in storage bins.

●Even more convenient when combined with Storage Bin Organizer (295100733).

[Compatibility] RXT, RXT-X, GTX and WAKE Pro (2018)

●This is a necessary part for installing the genuine SEA-DOO fender (product number: 295100418).

●Snap-In Fenders Installation Kit

●2 pieces/set

*This is for one side, so if you need 4 places on the left and right, you will need 2 sets.

[Compatibility]
RXT, RXT-X, GTX and WAKE Pro(2018)

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Please use it for FISH PRO / GTX models without audio after 2018 or when the audio is broken.

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Convenient for charging mobile phones, wearable cameras, etc.

●This excellent device detects the amount of current required for proper charging time, and prevents devices from overcharging.

●2018 - Standard equipment on GTX Limited300 model.

[Compatibility]
SEADOO SPARK

●A spring-retractable reboarding step that enhances playability and is convenient when reboarding from the water.

[Compatible models]
SEA-DOO SPARK 3-seater

*Ski pylons cannot be used for tubes, etc.

*Cannot be used for SPARK 2-seater.

●This is a necessary part for installing the genuine SEA-DOO fender (product number: 295100418).

●Snap-In Fenders Installation Kit

●2 pieces/set

*This is for one side, so if you need 4 places on the left and right, you will need 2 sets.

[Compatibility]
●SEA-DOO iBR model before 2017 model (*Not required for SPARK)