Collection: accessories

[Compatible models] KAWASAKI
ULTRA310LX/310R/310X SE/310X
260LX/260X
250X
LX

All components of X-Sponson are machined from aluminum, ensuring durability and functionality.
A complete sponson with overwhelming visuals.
With a uniquely designed wide fin and sponson base with an ideal angle,
Dramatically improves handling and straight-line stability.

It is possible to adjust the position in 12 ways to suit your preferred riding style.
Easy to install with bolt-on
Includes all bolt parts needed for installation.

[Compatible models] All Yamaha 1.8L HO, SHO, SVHO engines

The billet knob eliminates the Phillips screws that secure the conventional engine cover.
Provides quick and easy hand access to the engine for maintenance/cleaning.

Just a direct replacement for the original steel mounting screws securing the corrosion-prone engine cover.
It installs in minutes and is a great-looking, practical upgrade.

- Provides quick and easy access to the engine during maintenance/cleaning.
- You can easily dress up your engine room.
-Easy to turn by hand billet aluminum knob made of threaded stainless steel shaft.

*If the screw part comes loose from the head body, please use an adhesive such as Locktite to attach it.

[Compatible models] All Yamaha 1.8L HO, SHO, SVHO engines

Billet oil cap is
Simply replace the conventional resin oil cap with a corrosion-resistant aluminum oil cap.
It installs in minutes and is a great-looking, practical upgrade.
You can easily dress up your engine room.

■With O-ring
■Made of durable 6061 billet

[Applicable models] SEA-DOO 4-stroke model (excluding SPARK)

Install it on top of the genuine oil cap.
The clutch function that prevents the oil cap from being over-tightened remains the same.
The aluminum billet cap stands out as an accent in the engine room.

[Information] We also recommend using the company's billet oil filter cap (UL53001).

[Compatible models]
KAWASAKI ULTRA300 /310 /LX(-'10) series
*Can be used for models other than ULTRA if hole machining is performed.

[Note] Flushing requires the company's billet flash adapter [UL18000]

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.

Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), compared to the genuine product (made of resin),
This eliminates wear and tear on the threaded part.

【size】
■Mounting space φ56
■Processed hole 34mm
■Hose piercing outer diameter 18.5mm
■Inner diameter 12.5mm

[Compatible models]
KAWASAKI Kawasaki
YAMAHA
SEADOO
*Processing to the hull is required for all models of all manufacturers.
*For models with a vent function (fuel tank pressure punishment valve) on the fuel cap, a separate tank pressure release is required.

Durable billet aluminum finish.

By installing this fuel filler on SEADOO boats and YAMAHA boats,
UNLIMITED billet fuel cap [Product number: UL030, UL036] etc.
Fuel cap for KAWASAKI can now be used.

General purpose
*If used on a model with a vent function (fuel tank pressure relief valve) on the fuel cap, a separate pressure relief must be provided.

Set of machined aluminum fuel cap and filler.
It has a built-in fuel hose that prevents fuel from blowing back.
Double line hose structure.

[Support] M8 flat head screw

[Quantity] 1 piece
*Usually countersunk screws require counterbore processing on the mating material,
By using rosette washers, you can use countersunk screws without machining.

Be stylish with your favorite color! Also good as a design element!
You can also dress it up by replacing the bolts that secure the sponsons.

[Compatible models]
SEA-DOO 4-stroke ALL model (*excluding SPARK)

*Please use the genuine O-ring when using.

The oil cap can be removed without special tools when changing the oil.
It's very stylish and makes the engine room stand out.

UL53001SL Silver
UL53001OR Orange
UL53001RD Red
UL53001YL Yellow

[Compatible models] KAWASAKI
1500SX-R New SX-R
800SX-R
800X-2
STX900

Aluminum billet exhaust cover
Not only the 1500SX-R but also Kawasaki's stand-up 800 series can be installed.
Contrast cuts with a wide variety of colors,
This contributes to weight reduction while creating a luxurious rear view.

UL14020BK Black
UL14020SL Silver
UL14020GR Green
UL14020GM Gunmetal

[Compatible models] KAWASAKI SXT series ULTRA series
ULTRA310X/310LX/310R/310SE
ULTRA300X / 300LX /
ULTRA260X/260LX
ULTRA250X
ULTRA LX
STX12F / STX15F / STX 160X / 160LX

*For the SX-R series and X-2 series, the following products are compatible.
*Product number: UL010 / UL14020

3-piece construction: base plate, spacer, and face disc.
Anodized exhaust cover. Creates a stylish rear view.
Machined aluminum specification with excellent strength and corrosion resistance.
A dress-up item with a wide variety of colors.

[Kit contents]
Base plate x 1,
Spacer x 1,
Face disk x 1,
Mounting bolts: M6-10 (button) x 3,
M6-28 (cap) x 3

[Applicable models] All KAWASAKI 4-stroke models

Performance dress-up parts with high quality strength and precision!
Weight reduction has also been achieved by simplifying the air suction valve.

*In order to install this part to Kawasaki's SC model, it is necessary to remove and install the head pipe.

[Application]
Used in KAWASAKI electrical box
Replacement parts for plastic joints.

■Quantity: 1 piece
■Billet specifications

There is no need to worry about damage due to deterioration due to years of use, and the visual appearance is also dressed up!

[Disclaimer]
*O-rings and grommets are not included with this product.

UL046SL Silver
UL046GM Gunmetal

[Compatible models] KAWASAKI Kawasaki
650/750/800/900/1100 engine

The inside of the engine room stands out.
*Please use the genuine O-ring when installing.

UL044SL Silver
UL044BK Black
UL044GR Green
UL044RD Red
UL044BL Blue

[Applicable models] KAWASAKI 4-stroke

*When installing, please use the genuine O-ring (92055-1295).

Make your personal watercraft's genuine cam cover stylish! Dress up your engine room.

■Compatible with: 500/800 bilge pump

■Material: Aluminum ■Hose piercing port: Ф19mm
■Exit hole: Ф15mm
■Mounting hole: Ф26mm

A straight type that can be installed flat on the hull.

UL013SL Silver
UL013BK Black
UL013GR Green
UL013BL Blue
UL013PU Purple

500/800 bilge pump

■Material: Aluminum
■Hose piercing port: Ф19mm
■Exit hole: Ф14.5mm
■Mounting hole: Ф22mm

This type has a nozzle angle of 45°, and the direction of water discharge can be adjusted.

UL012SL Silver
UL012BK Black
UL012GR Green
UL012RD Red
UL012BL Blue
UL012PU Purple

[Compatible models] KAWASAKI
New 1500SX-R
800SX-R
800X-2
STX900

*For the ULTRA series and STX series, the following products are compatible.
*Product number: UL14010, UL011, UL14001

Made of aluminum A6061 with excellent strength and corrosion resistance, this cover is chemically polished anodized and has an excellent design.
■JJSF certified parts

■Hose piercing port: Ф10mm
■Exit hole: Ф8mm
■Mounting hole: Ф13mm

UL009SL Silver
UL009BK Black
UL009GR Green
UL009BL Blue
UL009OR Orange
UL009RD Red

■Material: Aluminum
■Hose piercing port: Ф13mm
■Exit hole: Ф10.5mm
■Mounting hole: Ф16mm

UL008SL Silver
UL008BK Black
UL008GR Green
UL008BL Blue

[Compatible models] YAMAHA

Bushing. Can be used for front and rear.
By replacing the original plastic with aluminum, the strength and visuals have been upgraded!

■Material: Aluminum

UL007SL Silver
UL007RD Red
UL007PU Purple
UL007BL Blue
UL007BK Black

Compatible with PWC 3 manufacturers
SEADOO <2015 and later models> Excluding SPARK Kawasaki, YAMAHA

The float is located on the life vest side to prevent the weight of the cord from swinging around.
When new, it will continue to remain buoyant even if left in a tank filled with calm water for a week.

■Size: Total length approx. 40cm, when extended approx. 1m30cm

【please】
*Before use, please check the cord for cracks and the crimped parts at any time.
*SD key registration is required, so please check with the dealer you purchased the hull from.
*This product is not compatible with the SD SPARK series.

*For Kawasaki and YAMAHA models, please select UFL2101, which is compatible with two manufacturers.

■S-type hook, ratchet body: Stainless steel
■Belt length: approx. 4.5m
■Belt width: approx. 25mm
■Belt length from hook to ratchet: Approximately 50cm
■S-type hook total length: approx. 12cm
■Ratchet (when folded): Approx. 14cm

[Disclaimer]
Please note that the listed sizes are a guideline as there are individual differences.

●By increasing the length from the hook to the ratchet,
The ratchet part will no longer interfere with the hull or sponsons.

●The hook part has a stopper to prevent the hook from falling.
●S-type hooks are all made of stainless steel and will not only keep out salt water but also rust.
●The "UNLIMITED" logo printed on the belt is an accent.

●By extending the length from the hook to the ratchet more than usual, the ratchet part will not interfere with the hull or sponson.

●S-type hooks are all made of stainless steel and will not only keep out salt water but also rust.

●The "UNLIMITED" logo printed on the belt is an accent.

■Belt length 4.5m x width 25mm
■Belt length from hook to ratchet: Approximately 50cm

■When rolled: 65×224mm
■When unfolded: 190×224mm

Protects the hull of your boat from scratches from ratchets and belts.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Trailer Parts Boat Trailer Lashing Belt Wet Fabric UNLIMITED

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 1 piece ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Trailer parts Boat trailer lashing belt Wet fabric

In response to hot requests from Transform Food Kit fans, UNLIMITED SX-R key chains have been released!

Real color specification with heavy rubber.
Not only can it be used as a key chain, but it can also be used as a charm or as a decoration on the zipper of a bag.

■Body size: 8 x 3.3cm (rings and chains not included)

For use with boats equipped with Kawasaki ULTRA series single seat (UL46310)

Decal kit for boats equipped with ULTRA series single seat (UL46310).
It uses 3M full color sheets and has beautiful graphics, as well as
Easy-to-install cut patterns make new visuals easy to install.
This film has a proven track record of maintaining its original beauty over a long period of time due to its highly durable surface treatment.

[How to order]
If you specify any number in the notes section when ordering,
The original bib number will be printed just like the construction example. (up to 3 digits)
Please note that unless specified when ordering, it will be made in a plain color.

[Disclaimer]
As this item is made to order, we cannot accept changes or cancellations after the order has been placed.

■Size: 24cm(10")

【set content】
■Seat cover/front x 2 sheets (independent seats such as driver's seat and passenger seat)
■Seat cover/rear × 1 piece (for rear seat)
■Shoe mat x2 (not for sale)
■UNLIMITED steel limited can (not for sale)

The seat cover does not come off, but it is not too thick, making it the best material thickness.
It's easy to install by just hanging it on the headrest, so you won't get the seat wet even if you ride in a wetsuit.
If you have this, you can move a trailer while wearing marine wear.

Sweat and dirt after Mt. Umikawa or various field sports,
Protects your car seats from wear and tear caused by pets.
The rear seat is flat so it can also be used as a leisure mat or for cold protection!

■Material Surface: Chloroprene Back: Slice skin

■Product details
(A) For front product total length: 147cm
Main body (excluding headrest): Width approx. 64cm x length 127cm
Headrest part: width 24cm x height 20cm x gusset 10cm

(B) For rear Size: W125xH130cm (folded part 15cm)

*This is an image taken with the product attached to a HONDA Vezel.

[How to care for neoprene fabric products]
・Due to the delicate nature of the fabric, do not use a washing machine, dryer, or bleach.
- When washing, we recommend washing by hand with fresh water or a detergent specifically designed for neoprene.
- There may be creases when opening the package, but this is not a product defect.

[Limited set of 2 sheets for front seat and 1 sheet for rear seat]

It stays in place but is not too thick, making it the best material thickness.
It's easy to install by just hanging it on the headrest, so you won't get the seat wet even if you ride in a wetsuit.
If you have this, you can move a trailer while wearing marine wear.

Sweat and dirt after Mt. Umikawa and various field sports, wear and tear caused by pets, etc.
Protects the seats of your beloved car.
The rear seat is flat so it can also be used as a leisure mat or for cold protection!

(A) 2 sheets for independent seats such as driver's seat and passenger seat
(B) 1 piece for rear seat

■Material
Surface: chloroprene
Back: Slice skin

■Product details
(A) Product total length: 147cm
Main body (excluding headrest): Width approx. 64cm x length 127cm
Headrest part: width 24cm x height 20cm x gusset 10cm

(B) Size: W125xH130cm (folded part 15cm)

*This is an image taken with the product attached to a HONDA Vezel.

[How to care for neoprene fabric products]
・Due to the delicate nature of the fabric, please do not use a washing machine, dryer, or bleach.
・When washing, we recommend washing by hand with fresh water or a detergent specifically designed for neoprene.
- There may be creases when opening the package, but this is not a product defect.

This is a rear seat cover from the Unlimited "LOGO" series.
To install, simply hang it on the rear seat top.
It is made of chloroprene, the same material used in wetsuits, so even if the surface gets wet, water will not soak through to the back. It is a great item to have when you go out for outdoor activities such as marine sports or camping, or when you go out with children or pets.
The seat won't get wet even if you ride in a wetsuit.
The underside is made of skin material, so it's not only waterproof but also stays in place even if you get in a hurry.

It is also very convenient because if you hang it from the trunk space side, it can be used as a dirt-proof cover for the back space.
It can be rolled up and stored, so it can also be used as a cylindrical cushion or pillow.
It can also be used as a dirt-proof cover for trunks, a flat sheet for outdoors, or a cold weather sheet. The fabric is not too thick.

This product will protect your car's seats from not only marine wear but also sweat, dirt, and wear and tear caused by pets after various field sports.

■ Surface: Chloroprene ■ Back: Slice Skin ■ Size: W125 x H130cm

*Because the material is stretchy, there may be an error of about ±1 to 2 cm during the manufacturing process.
*The image of all seats being occupied is for illustrative purposes only.

[How to care for neoprene fabric products]
- As this is a delicate fabric, do not use a washing machine, dryer or bleach.
-If you need to wash it, we recommend hand washing with fresh water or neoprene detergent.
-There may be creases when you open the product, but this does not mean the product is defective.

■Size
Product total length: 147cm
Main body (excluding headrest): Width approx. 64cm x length 127cm
Headrest part: width 24cm x height 20cm x gusset 10cm

Easy to install, just hang it on your headrest.
It is OK to ride with dirty clothing or a wet wet suit.
If you have this, you can move a trailer while wearing marine wear.

Sweat and dirt after Mt. Umikawa and various field sports, wear and tear caused by pets, etc.
Protects the seats of your beloved car.

■For independent seats such as driver's seat and passenger seat
■Quantity: 2 pieces

■Material
Surface: chloroprene
Back: Slice skin

*This is an image taken with the product attached to a HONDA Vezel.

[How to care for neoprene fabric products]
・Due to the delicate nature of the fabric, please do not use a washing machine, dryer, or bleach.
・When washing, we recommend washing by hand with fresh water or a detergent specifically designed for neoprene.
- There may be creases when opening the package, but this is not a product defect.

■Waterproof car seat cover for single seat

-Easy to install, just hang it on the headrest and is compatible with many seats.
- Made of wet fabric (chloroprene), so even if the surface gets wet, the inside is waterproof!
・It will not stain the car seat directly even if you get in the car while it is dirty or wet.
- The lining fabric is non-slip and does not easily slip off.
Protects your car seat from wear and tear caused by sweat, dirt, and pets after Mt. Umikawa or various field sports. Perfect for outdoor activities such as camping and swimming!

■For independent seats such as driver's seat and passenger seat ■Quantity: 1 piece ■Surface: Chloroprene ■Back side: Slice skin ■Size Product total length: 147cm
Main body (excluding headrest): Width approx. 64cm x length 127cm
Headrest part: width 24cm x height 20cm x gusset 10cm

*This is an image taken with the product attached to a HONDA Vezel.

It has the best texture that doesn't shift and isn't too thick.
Easy to install, just hang it on the headrest.
Even if you ride in a wetsuit, the seat will not get wet.
If you have this, you can move a trailer while wearing marine wear!

Sweat and dirt after Mt. Umikawa or various field sports,
Protects your car seats from wear and tear caused by pets.

*Due to the elastic material, there may be an error of ±1 to 2 cm during the manufacturing process.
*The image of all seats is for illustrative purposes only.

[How to care for neoprene fabric products]
・Due to the delicate nature of the fabric, please do not use a washing machine, dryer, or bleach.
・When washing, we recommend washing by hand with fresh water or a detergent specifically designed for neoprene.
- There may be creases when opening the package, but this is not a product defect.

To install, just hang it on the rear seat top.
It's made from chloroprene fabric, which is used in wetsuits, so even if the surface gets wet, water won't seep through to the back. It's safe to have when going outdoors such as marine sports or camping, or when going out with children or pets.
Even if you ride in a wetsuit, the seat will not get wet.
The back side is made of skin material, so it's not only waterproof, but also stays in place even when you get in a car in a hurry.

Also, if you hang it from the trunk space side, it can also be used as a dirt-proof cover for the back space, which is very convenient.
Since it can be rolled up and stored, it can also be used as a cylindrical cushion or pillow.
It can also be used as a dirt-proof cover for the trunk room, a flat sheet for outdoor use, and a cold-proof sheet.
It has the best texture and is not too thick.

Not only marine wear, but also sweat and dirt after various field sports, wear and tear caused by pets, etc., are all you need to protect your car seats.

■Surface: Chloroprene ■Back: Slice skin ■Size: W125xH130cm

*Due to the elastic material, there may be an error of ±1 to 2 cm during the manufacturing process.
*The image of all seats is for illustrative purposes only.

[How to care for neoprene fabric products]
・Due to the delicate nature of the fabric, please do not use a washing machine, dryer, or bleach.
・When washing, we recommend washing by hand with fresh water or a detergent specifically designed for neoprene.
・There may be creases when opening the package, but this is not a product defect.

A key chain to prevent small items such as keys from being submerged in water.

The soft foam body also functions as a buoyant body, so it doesn't feel like a foreign body even in your pocket.
Even if it is floating in water for a long time, it is coated with vinyl so it does not absorb water easily.

[Compatible models]
SEA DOO All models

[Material] Polished stainless steel

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x24mm
Hook part: Width 136mm x 87mm x 40mm
Weight: Approx. 345g

Luxurious stainless steel buff mirror finish!
Replacing the cheap genuine hook will definitely improve your visual appearance!

[Compatible models] KAWASAKI
STX160 series
ULTRA series
STX series

[Material] Stainless steel polished

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x28mm
Hook part: Width 136mm x 34mm x 48mm
Weight: Approx. 351g

Luxurious stainless steel buff mirror finish!
The visuals will be upgraded by replacing the cheap genuine hooks with polished ones!

[Compatible models]
KAWASAKI ULTRA series / STX160 series
SEA-DOO All models

[Material] Stainless steel polished
【size】
Mounting hole pitch: Approx. 41mm Thread part: M8x27mm
Hook part: Width 92mm x 43mm x 21mm
Weight: 142g

Luxurious stainless steel buff mirror finish!
Same shape as the hook (hook, towing: genuine product number [27012-3860]) used in ULTRA250/260.

The rear hook of 300X and later has been changed to a simplified and simple part.
Since it has a cleat shape, it is a convenient hook when mooring a boat.
A masterpiece with polished details that are not polished with genuine hooks.

[Compatible models]
STX160 series
KAWASAKI ULTRA300/310 series, ULTRA LX ('12~)
ULTRA300X/ULTRA300LX
ULTRA LX('12～)
ULTRA310X / ULTRA310R / ULTRA310LX (-'21) / ULTRA310SE

*Cannot be used with ULTRA250/260.

[Material] Stainless steel polished

Luxurious stainless steel buff mirror finish!
By replacing it, you are sure to improve your visual appearance from the cheap genuine hook!

【accessories】
M8x30 cap bolt x 1
Spring washer x 1

[Compatible models] SEA-DOO ST3 Hull
*RXT-X300/GTX-L300 '18 or later

[Quantity] 1 set of 10 parts
[Material] Stainless steel
[Thickness] 1.5mm

Washer used for the seat base engine cover of SEA-DOO ST3 Hull series.
Prevents digging into the genuine engine cover when tightening it, making it ideal for accent parts!

[Compatible] SEA-DOO X series sponson (S3 hull / GTI hull after 2011)

[Quantity] 10 pieces
[Material] Stainless steel
[Size] 3mm

Oval washer used for SEA-DOO X series sponsons.
Reinforces the genuine sponsons and is also used as an accent part of the sponsons.

[Compatible models] SEA-DOO SPARK

[Quantity] 25 pieces
[Material] Stainless steel
[Size] 4mm

The genuine washer (291003880) used on the body of SEA-DOO SPARK is made of plastic and may break depending on the number of times it is used, so we recommend replacing it with this kit during maintenance.

Two pieces of this kit are required to replace the washer on a SPARK 1 boat.
★Total number used: Front body x 8, rear body x 16, center body x 21 (2) = 47 in total

[Applicable models] KAWASAKI ULTRA300/310 series
*Can be used for models other than ULTRA by drilling holes.

【please note】
*This fitting includes
"Kawasaki Genuine Adapter" and "Flash Adapter UL18000" cannot be used together because the pitch is different.

[Applicable models] KAWASAKI ULTRA300/310 series

Engine Flushing Flushing Aluminum Fitting
Just replace it with the genuine stock part and it will become an accent to your rear end view.
Brass adapters will be installed and removed several times each time they are washed, so smoothness is important.
Genuine ones (made of resin) tend to wear out against metal, so damaged threads cannot be washed smoothly with water.
Therefore, by replacing it with this product (made of aluminum), wear and tear on the threaded part will be eliminated compared to the genuine product (made of resin).

[Size] ■Mounting space φ56, ■Processed hole 34mm, ■Hose piercing outer diameter 18.5mm, ■Inner diameter 12.5mm
[Installation] Can be used on models other than ULTRA by drilling holes.

[Applicable models] SEA-DOO T3, S3, GTI hull
*For RULE bilge pump only

[Accessories] 4 rivets

[01689] 500 [97033] 800 [01608] 1100 This is a stay when installing the bilge pump.
A bilge pump can be installed.
Bilge pump holder [12-1116] can be installed.

[Compatible models] YAMAHA 700SJ ('96~)
*For RULE bilge pump only

[Accessories] 8 rivets

[01689]:500[97033]:800[01608]1100 Stay when installing bilge pump.
Two bilge pumps can be installed.
Bilge pump holder [12-1116] can be installed in 45 degree increments.

[Compatible models] For KAWASAKI

Kawasaki models do not have enough space around the oil filter, so
It is difficult to attach and remove the filter and requires some skill.
This product makes it easy to loosen and tighten the filter with a thin wrench.

[Applicable models] KAWASAKI ULTRA300/310 series

●Remove and use the muffler filter inside the normal muffler.
● Filter maintenance can be omitted by removing the filter.

[Compatible models] KAWASAKI
800SX-R
800X-2

[Product size]
●Outer diameter: 59.65mm
●Total length: 49.15mm
●Minimum inner diameter: 44mm
●Maximum inner diameter: 53mm

Horsepower increases by 1 horsepower just by attaching a sleeve to the stock exhaust line!
The maximum speed has also increased by more than 1km!
We promise improved response and experience in the medium and low speed range.

[Compatible models] KAWASAKI
Exhaust diameter Ф50mm
15F('09-)/ULTRA250X('08)/ULTRA260X/ULTRA LX('09-)

★The following model with exhaust port diameter Ф60mm is part number: JL14001.
STX series ('00-'07) *Excluding 900
STX-R/12F/15F('04-'08)/ULTRA250X('07)/ULTRA300X/ULTRA LX('07-'08)

●Produces a stylish rear exhaust.
●Machined from aluminum (A6061) with excellent strength and corrosion resistance.
●Cover flange with chemically polished alumite processing and excellent design.