trailer parts (404 products)
-
Vendor:J-LINES
Interrupt Terminal Set of 6 Wiring Parts Trailer Wiring Parts Interrupt JL004 Boat Trailer Parts
Vendor:This is a very convenient terminal for connecting wires and for interrupting.
[Quantity] 6 pieces 1 set
Sale price ¥350 Regular price¥350Regular price ¥350Unit price per (excluded_tax) -
Vendor:FACTORY ZERO
[Shipping not included] Trailer slope rail for light trailers J-2000 Factory Zero Made in Japan Towing vehicle
Vendor:Trailer slope rail, compatible with rail width 350 mm (rail center to center)
By installing a trailer slope rail, the JET can be raised and lowered smoothly, and the tail lamp, hose, etc. are not submerged in water, which prevents damage to the trailer and makes it last longer.
When not in use, it can be stored between the trailer and the PWC body.
To install, simply attach the rail guide (included) to the trailer body.●By installing a trailer slope rail, you can smoothly raise and lower the boat, and the tail light, axle, etc., will not be submerged in water, preventing damage to the trailer and extending its life.
●Made of durable steel (iron galvanized) and 50 x 50 square pipe, so you don't have to worry about pulling it up with a winch.
(Please have 2 to 3 people support you when pulling it up. If you force it up using only the winch, it may cause damage to the winch.)
●When not in use, it can be easily stored between the trailer and the PWC body.
(Please note that depending on the boat or trailer, it may not be possible to store it, and depending on the boat, the bottom may hit the rail guide part when loading it.)
A safe stainless steel round pipe is used for the handle.
●For processing on the trailer side, simply attach the rail guide to the rear frame of the trailer using U bolts. (There is an installation confirmation at the end of the page)
*Please note that if the frame on the trailer side to be installed is low, the rear end of the slope rail will be close to the ground, which is dangerous.Q. Is it possible for the "Rail Guide Section" to fit between the trailer's bank rails and be attached to the rear end frame?
The rail guide part size is 420 mm in total horizontal length.
The U bolt size for installation is 112 mm effective width and 76 mm depth.
Especially if the R shape is quite deep on the rear end frame, the U bolt may not fit.
In that case, it is possible if you prepare a larger U-bolt etc. separately.
*If installed on a frame with a tight radius, the bottom of the boat may hit the rail guide.
In that case, raise the bank rail and adjust. We recommend that you check the size of the rail guide parts using a dummy in advance.
*If there is a license plate etc. on the mounting part, it is necessary to move the plate etc. (Other than public roads)
*Depending on the compatibility of the boat and trailer, it may not be possible to store the rail.
The space for the rail to pass through after installation requires a gap of approximately 85 mm in height and 71 mm in width.[About payment and packaging]
For products shipped directly from the manufacturer
●Prepayment (bank transfer) only. (Cash on delivery not available)
●Cannot be bundledSale price ¥44,100 Regular price¥44,100Regular price ¥44,100Unit price per (excluded_tax) -
Vendor:No Brand
LED Prism Side Marker 12V C14010W Trailer Parts Boat Trailer
Vendor:■It is an LED prism side marker for the trailer.
■Overwhelmingly brighter than conventional LED vehicle width lights.
■Made of LED to reduce power consumption. Easy to install. Stud mount.
■Quantity: 1 piece
■White color 12V
■Size: 52 x 71 x 22mm
■Same shape as SOREX
Sale price ¥1,400 Regular price¥1,400Regular price ¥1,400Unit price per (excluded_tax) -
Vendor:BLAST TAIL
BLAST TAIL 3 LED Tail Lamp BL-19170 Trailer Brass Trail
Vendor:Used as a tail light for PWC/boat trailers, etc.
Three LED lamps for stop, tail/blinker, and back.●1 piece (for one side)
*Common shape for left and right, 2 pieces required when replacing one unit ●Waterproof specification ●Size: Width 200 x Height 70 x Thickness 50 mm
●12V compatibleSale price ¥7,000 Regular price¥7,000Regular price ¥7,000Unit price per (excluded_tax)Sold out -
Vendor:SOREX
SOREX wiring bracket (general purpose) genuine hitch member parts trailer ATB-046
Vendor:The wiring socket can be installed at any position on the towed vehicle.
Made by SOREX
Sale price ¥3,600 Regular price¥3,600Regular price ¥3,600Unit price per (excluded_tax) -
Vendor:TIGHTJAPAN
Tail lamp for cargo trailer AS01-30 1101-01 TIGHTJAPAN Trailer parts lights
Vendor:●Size: Height 60 x Width 230 x Thickness 30mm
●Sales unit: 1 piece/left and right common shape
●24V compatible*Water resistant specifications: Built to withstand water from above, such as rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.Sale price ¥7,500 Regular price¥7,500Regular price ¥7,500Unit price per (excluded_tax) -
Vendor:No Brand
[Set of 2] 3 Tail Lamp LED Lights Trailer Parts Boat Trailer PWC Trailer Personal Watercraft Towed AG09227-2
Vendor:■Can be used as a tail light for PWC, boat trailers, etc.
■Three LED lamps for stop, tail/blinker, and back.
■12V compatible
■Size: Width 265 x Height 90 x Depth 30mm
■Bolt length: 13mm. Line length: 300mm
■Accessories: Instruction manual
■Left and right common shape (1 set of 2)
★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.Sale price ¥12,000 Regular price¥16,000Regular price ¥12,000Unit price per (excluded_tax)Sold out -
Vendor:No Brand
Triple Tail Lamp LED Lights Trailer Parts Boat Trailer PWC Trailer Personal Watercraft Towed AG09227-1
Vendor:■Can be used as a tail light for PWC, boat trailers, etc.
■Three LED lamps for stop, tail/blinker, and back.
■12V compatible
■Size: Width 265 x Height 90 x Depth 30mm
■Bolt length: 13mm. Line length: 300mm
■Accessories: Instruction manual
■Left and right common shape (sold in units of 1 piece)
★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.Sale price ¥6,700 Regular price¥8,000Regular price ¥6,700Unit price per (excluded_tax)Sold out -
Vendor:UNLIMITED
Retractable Transom Tie Down Stainless Steel / Tie Down Pad Set M 714256-ULM
Vendor:【set content】
●NO.714256: Transom tie down ●NO.ULT131BK-M x 2 pieces: Tie down pad M size 2 piecesSecure to the rear of the trailer using mounting hardware.
The belt wound inside the housing can be stretched to any desired length.
Hang the hook on the transom handle (eye) of the boat, wrap it with a ratchet, and secure it.
Unlike regular tie-down belts, there is no need to take them on and off from the trailer every time.
[Mounting brackets (e.g. SRX-143L, SRX-143R)]●Material: Stainless steel (metal parts)
●1 set of 2 ●Belt width: 48mm x length ~ 900mm
●Load capacity: 3000LBS (1360kg)/2 pieces
*The hook in the image is not included.
(Image of use in conjunction with multi-hook made by other companies)
Tie-down belt ratchet type automatic winding trailerSale price ¥23,500 Regular price¥30,500Regular price ¥23,500Unit price per (excluded_tax)Sale -
Vendor:No Brand
Electrical Wiring 7 Pin Connector Car Side Wiring Socket Made of Reinforced Plastic 201-02P Trailer Tight Japan Solex Tag Master
Vendor:■7-pin type wiring socket for lights on the towing vehicle side
■This item is made of durable reinforced plastic instead of the conventional aluminum part.
■Made of reinforced plastic, it is inexpensive but has sufficient strength and is also extremely lightweight.
■Material (body): Reinforced plastic
■Compatible with: TIGHTJAPAN, SOREX, SUNTREX
*Wiring sold separately
Sale price ¥3,000 Regular price¥4,000Regular price ¥3,000Unit price per (excluded_tax)Sale -
Vendor:No Brand
Electrical Wiring 7 Pin Connector Trailer Side Plug Reinforced Plastic 201-01P Trailer Parts Boat Trailer Tight Japan Solex Sun
Vendor:■Trailer side 7-pin type wiring socket for lights
■This item is made of durable reinforced plastic instead of the conventional aluminum part.
■Made of reinforced plastic, it is inexpensive but has sufficient strength and is also extremely lightweight.
■Material (body): Reinforced plastic
■Compatible with: TIGHTJAPAN, SOREX, SUNTREX
*Wiring sold separately
Sale price ¥3,000 Regular price¥4,000Regular price ¥3,000Unit price per (excluded_tax)Sale -
Vendor:No Brand
200382-SET Coupler Lock Key & Pole Mount Lock Key Set Straight Steel Trailer Parts Towing Vehicle Safety Key with Key Transporter Anti-Theft
Vendor:■A set of trailer coupler lock key and ball mount lock key.
■The key is unique. (The key for the coupler lock and the key for the ball mount lock are different.)
[Coupler lock key]
■Helps prevent trailer couplers from falling off and being stolen.
■Material: Steel (chrome plated)
■Pin diameter: approx. 6.4mm
■Keys: 2 pieces[Ball mount lock key]
■Helps prevent the ball mount from falling off and being stolen.
■Material: Steel
■Pin size: approx. Ф16mm x 70mm.
■Compatible with: TIGHTJAPAN, SUNTREX, SOREX, class 3
■Keys: 2 piecesSale price ¥4,200 Regular price¥5,400Regular price ¥4,200Unit price per (excluded_tax)Sale -
Vendor:No Brand
1935BKT Tie Down Belt with Stopper Stainless Steel Trailer Parts Lashing Boat Trailer
Vendor:●The buckle and ratchet part have been made more durable.
●Equipped with a function to prevent the hook from coming off.■Belt size: width 25mm x length 4.5m
■Belt length from ratchet to S hook: Approximately 30cm
■Hook diameter: Ф10 (10mm)Sale price ¥4,500 Regular price¥4,500Regular price ¥4,500Unit price per (excluded_tax) -
Vendor:No Brand
Safety Chain with Stopper 1170mm Steel Plated Trailer Parts Boat Trailer 170002B
Vendor:■It becomes a safety chain when the trailer comes off from the car when towing the trailer.
■Material: Steel plating
■Chain length (not including S hook): 1,170mm
■S hook length: 110mm
■Hook part thickness: 11mm
Sale price ¥2,400 Regular price¥2,400Regular price ¥2,400Unit price per (excluded_tax) -
Vendor:No Brand
6 pole electrical wiring wiring set 6 core trailer wiring 6 pole wiring electrical wiring boat trailer 0104-S
Vendor:■6-core electrical wiring set
■Please use it for wiring hitch members, etc.【set content】
6-pole wiring 2m x 1
Single line 2m x 1
Interrupt terminal x 6Sale price ¥2,600 Regular price¥2,600Regular price ¥2,600Unit price per (excluded_tax) -
Vendor:No Brand
6-pole electrical wiring trailer wiring 6-core [10m] electrical wiring boat trailer 0104-01A
Vendor:■6-core electrical wiring
■Please use it for trailer wiring, etc.
■Type: 6 poles
■Total length: 10mSale price ¥8,000 Regular price¥8,000Regular price ¥8,000Unit price per (excluded_tax) -
Vendor:No Brand
Safety Cable with Stopper Set of 2 57-7575 Safety Wire Trailer Parts Boat Trailer
Vendor:■It becomes a safety cable when the trailer comes off from the car when towing the trailer.
■The hook has a metal fitting (stopper) to prevent it from coming off, making it a safe design.
■Specifications: Vinyl coating
■Length: 600mm (excluding hook)
■Hook part thickness: 12mm
■Wire thickness: 8mm
■Maximum load capacity: up to 2,268kg
■1 set of 2 pieces
Sale price ¥3,100 Regular price¥4,000Regular price ¥3,100Unit price per (excluded_tax)Sale -
Vendor:No Brand
Electrical wiring 7-pole connector car side wiring socket aluminum die-cast 201-02 Trailer Tight Japan Solex Tag Master
Vendor:■7-pin type wiring socket for lights on the towing vehicle side
■Material: Aluminum die-cast
■Compatible with: TIGHTJAPAN, SOREX, SUNTREX
*Wiring sold separately
Sale price ¥3,000 Regular price¥4,000Regular price ¥3,000Unit price per (excluded_tax)Sale -
Vendor:No Brand
Electrical wiring 7-pole connector 7-pole trailer side wiring plug Aluminum die-cast 201-01 Trailer Tight Japan Solex Tag Master
Vendor:■Trailer side 7-pin type wiring socket for lights
■Material: Aluminum die-cast
■Compatible with: TIGHTJAPAN, SOREX, SUNTREX
*Wiring sold separately
Sale price ¥3,000 Regular price¥4,000Regular price ¥3,000Unit price per (excluded_tax)Sale -
Vendor:TIGHTJAPAN
TIGHTJAPAN Rays Platinum Black Tail Lamp Kit [Mirror] Mirror Smoothing Bumper Cover 1216-65
Vendor:This is a kit that upgrades your current Max trailer (LED tail lamp specification vehicle) to be compatible with Rays Platinum tail lamps.
●Lamp: Platinum black tail lamp
●Bumper cover: [Mirror] kit.【please note】
*Not compatible with vehicles with water-resistant tail lamps or trailers from other companies.
*The bumper base and number bracket are made of black painted steel.
*The license lamp has been changed from a 5LED license lamp (carbon style) to an [SMD license lamp].[Kit contents]
Tail lamp x 2,
Bumper x 2,
Smoothing bumper cover x 2,
SMD license lamp x 1,
Number bracket x 1,
Conversion connector x 2,
Reflector x 2Sale price ¥43,200 Regular price¥43,200Regular price ¥43,200Unit price per (excluded_tax)Sold out -
Vendor:TIGHTJAPAN
TIGHTJAPAN Rays Platinum Black Tail Lamp Kit [Black] Black Smoothing Bumper Cover 1216-64
Vendor:This is a kit that upgrades your current Max trailer (LED tail lamp specification vehicle) to be compatible with Rays Platinum tail lamps.
●Lamp: Platinum black tail lamp
●Bumper cover: [Black] kit.【please note】
*Not compatible with vehicles with water-resistant tail lamps or trailers from other companies.
*The bumper base and number bracket are made of steel.[Kit contents]
Tail lamp x 2,
Bumper x 2,
Smoothing bumper cover x 2,
SMD license lamp x 1,
Number bracket x 1,
Conversion connector x 2,
Reflector x 2Sale price ¥41,200 Regular price¥41,200Regular price ¥41,200Unit price per (excluded_tax)Sold out -
Vendor:TIGHTJAPAN
TIGHTJAPAN Rays Tail Lamp Kit [Mirror] Plated Bumper Cover 1216-62
Vendor:This is a kit to upgrade your current Max trailer (vehicle with LED tail lamps) to be compatible with Rays tail lamps.
●Lamp: Rays tail lamp
●Bumper cover: [Mirror] kit.【please note】
*Not compatible with vehicles with water-resistant tail lamps or trailers from other companies.
*The bumper base and number bracket are made of steel.[Kit contents]
Tail lamp x 2,
Bumper x 2,
Smoothing bumper cover x 2,
SMD license lamp x 1,
Number bracket x 1,
Conversion connector x 2,
Reflector x 2Sale price ¥43,200 Regular price¥43,200Regular price ¥43,200Unit price per (excluded_tax)Sold out -
Vendor:TIGHTJAPAN
TIGHTJAPAN Rays Tail Lamp Kit [Black] Black Bumper Cover 1216-61
Vendor:This is a kit to upgrade your current Max trailer (vehicle with LED tail lamps) to be compatible with Rays tail lamps.
・Lamp: Rays tail lamp
・Bumper cover: [Black] kit.【please note】
*Not compatible with vehicles with water-resistant tail lamps or trailers from other companies.
*The bumper base and number bracket are made of steel.[Kit contents]
Tail lamp x 2,
Bumper x 2,
Smoothing bumper cover x 2,
SMD license lamp x 1,
Number bracket x 1,
Conversion connector x 2,
Reflector x 2Sale price ¥41,200 Regular price¥41,200Regular price ¥41,200Unit price per (excluded_tax)Sold out -
Vendor:TIGHTJAPAN
Rays Tail Lamp Lamp 2 Single Item 1216-23 TIGHTJAPAN MAX Trailer Trailer Parts Limited Quantity Sale
Vendor:-Size: 125 x 238 x 50mm (length x width x thickness)
●24V compatible
●Sold as one unit per side (common shape for left and right)The conventional MAX TRAILER (LED tail lamp specification car)
It is a tail lamp with an original design that lights up in a tube shape when turned on.【Guidance】
Set includes raise lamp, smoothing cover, bumper base, and number bracket.
"RAYS Tail Lamp Kit" is also available. Product number 1216-61, 1216-62, 1216-63Sale price ¥12,500 Regular price¥12,500Regular price ¥12,500Unit price per (excluded_tax) -
Vendor:TIGHTJAPAN
Rays Tail Lamp Platinum Black Lamp Single Item 1216-202TIGHTJAPAN Tight Japan Lights Trailer Parts MAX Trailer
Vendor:■Size: 125 x 238 x 50mm (length x width x thickness)
■24V compatible
■Left and right common shape (sold in units of 1 piece)★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by placing the trailer in water.
Water may enter the lamp and cause it to break.
The conventional MAX TRAILER (LED tail lamp specification car)
This is a tail lamp with an original design that lights up in a tube shape when turned on.【Guidance】
There is also a ``Raise Tail Lamp Kit'' that includes a Raise Lamp, Smoothing Cover, Bumper Base, and Number Bracket.Product number 1216-61, 1216-62, 1216-63, 1216-64
Sale price ¥12,500 Regular price¥12,500Regular price ¥12,500Unit price per (excluded_tax) -
Vendor:TIGHTJAPAN
Rays Tail Lamp Single Lamp 1216-20 TIGHTJAPAN Lights Trailer Parts MAX Trailer
Vendor:■Size: 125 x 238 x 50mm (length x width x thickness)
■Left and right common shape (sold in units of 1 piece)★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.
The conventional MAX TRAILER (LED tail lamp specification car)
It is a tail lamp with an original design that lights up in a tube shape when turned on.【Guidance】
We also have a ``Raise Tail Lamp Kit'' that includes a Raise Lamp, Smoothing Cover, Bumper Base, and Number Bracket.Product number 1216-61, 1216-62, 1216-63
Sale price ¥12,500 Regular price¥12,500Regular price ¥12,500Unit price per (excluded_tax)Sold out -
Vendor:TIGHTJAPAN
Round LED Tail Lamp 1216-05 TIGHTJAPAN Lights LED Lamp
Vendor:Please note that we are currently accepting reservations as this item will be restocked around the end of October 2022.
-Size: 120 x 120 x thickness 30mm
●Common shape for left and right (sold in units of 1 piece)★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.Sale price ¥5,000 Regular price¥5,000Regular price ¥5,000Unit price per (excluded_tax) -
Vendor:TIGHTJAPAN
1215-00 TIGHTJAPAN LED back lamp square MAX trailer parts LED lamp
Vendor:back lamp
Size: Height 105 x Width 30 x Thickness 30mmSale price ¥2,500 Regular price¥2,500Regular price ¥2,500Unit price per (excluded_tax) -
Vendor:TIGHTJAPAN
TIGHTJAPAN Number Guard [Steel] 1213-20 Number Protection Parts MAX Trailer Parts
Vendor:[Material] Steel
●Protects the license plate from contact not only when washing the boat but also while driving.
*This is a product to prevent (alert) damage to license plates.
*Do not wash or perform maintenance on the boat with a load applied to the number guard.
(When using with a load, please use a rear jack.)Sale price ¥2,500 Regular price¥2,500Regular price ¥2,500Unit price per (excluded_tax)Sold out -
Vendor:TIGHTJAPAN
TIGHT JAPAN Multi Number Bracket 2 [Steel] 1213-14 Trailer Parts TIGHT JAPAN
Vendor:●Color: Black
●Material: Steel
*Please purchase U-bolts for installation separately.Sale price ¥6,000 Regular price¥6,000Regular price ¥6,000Unit price per (excluded_tax) -
Vendor:TIGHTJAPAN
Multi-number bracket [Stainless steel] 1213-13 Trailer parts TIGHTJAPAN TIGHT JAPAN
Vendor:●For premium package
●Compatible with 75mmx45mm frame
●Material: Stainless steel
*Please purchase the mounting bolt [Part number 0901-00U bolt 75x45 1 piece] separately.【please note】
For regular cars, welding is required.Sale price ¥8,000 Regular price¥8,000Regular price ¥8,000Unit price per (excluded_tax) -
Vendor:TIGHTJAPAN
TIGHT JAPAN Multi Number Bracket [Steel Black] 1213-12 Trailer Parts TIGHT JAPAN
Vendor:[Change from Viper color to black]
●For premium package
●Material: Steel
*Please purchase U-bolts for installation separately.Sale price ¥3,800 Regular price¥3,800Regular price ¥3,800Unit price per (excluded_tax)Sold out -
Vendor:TIGHTJAPAN
TIGHTJAPAN License Lamp 6 LED Lights Number Light Trailer Parts Boat Trailer 1213-02
Vendor:●24V compatible. 6 LED lights.
■Size: Height 23 x Width 80 x Thickness 32mm
■Cord length: Approximately 61cm (excluding bullets and round terminals)
●Sold in units of 1 piece★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.Sale price ¥3,500 Regular price¥3,500Regular price ¥3,500Unit price per (excluded_tax) -
Vendor:TIGHTJAPAN
Thin SMD Side Marker 1210-02 TIGHTJAPAN MAX Trailer Towing Vehicle Trailer Dolly Lights Tail Lamp TIGHTJAPAN
Vendor:[In 2018, the white base has been changed to a black base. ]
■Size: Height 52 x Width 101 x Thickness 9mm
■Sold in units of 1 piece★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.Sale price ¥2,850 Regular price¥2,850Regular price ¥2,850Unit price per (excluded_tax) -
Vendor:No Brand
Car side wiring connector stay steel 11-771 connector stay trailer parts boat trailer
Vendor:■This stay is for attaching the 7-pole connector of the hitch member.
■Material: Steel
■Plate thickness: 1.2mm
*Plate only (screws etc. are not included)■Size details are listed in the image
Sale price ¥900 Regular price¥1,000Regular price ¥900Unit price per (excluded_tax)Sale -
Vendor:TIGHTJAPAN
Rays LED Reflector 1105-05 Triangular Reflector TIGHTJPAN Trailer Parts Boat Trailer Light Max Trailer TIGHTJPAN
Vendor:It lights up in conjunction with the small light, improving the visibility of following vehicles.
●Sold in units of 1 piece.
●Size: 1 side 160mm★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.Sale price ¥3,800 Regular price¥3,800Regular price ¥3,800Unit price per (excluded_tax) -
Vendor:TIGHTJAPAN
SMD LED reflector 18 chips 1105-02 triangular reflector TIGHT JAPAN MAX trailer trailer parts lights triangle reflector
Vendor:Triangle reflector with built-in LED 18 chips
Waterproof performance that clears IP67 standard●Size: 160mm on one side
●Lights up in conjunction with brake and small.
●Sold in units of 1 piece★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.Sale price ¥3,300 Regular price¥3,300Regular price ¥3,300Unit price per (excluded_tax) -
Vendor:TIGHTJAPAN
TIGHTJAPAN Triangle Reflector Triangle Reflector 1105-00 Trailer Parts Boat Trailer TIGHT JAPAN Genuine
Vendor:■MAX TRAILER triangle reflector
■Size: 160mm on one side (with bolts)
■Upper and lower mounting holes
■Quantity: 1 piece
Sale price ¥2,000 Regular price¥2,000Regular price ¥2,000Unit price per (excluded_tax)Sold out -
Vendor:TIGHTJAPAN
Side marker clear 1104-01 TIGHT JAPAN trailer parts lights boat trailer TIGHT JAPAN genuine
Vendor:●With marker line
-Size: Height 52 x Width 101 x Thickness 27mm
●Sold in units of 1 piece★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.Sale price ¥1,000 Regular price¥1,000Regular price ¥1,000Unit price per (excluded_tax)Sold out -
Vendor:J-LINES
Stainless Steel Square U Bolt Kit 150 x 63 x φ10 Trailer Parts Boat Trailer 0908-01
Vendor:■M10 75x45 square long bolt for pipe
■Bolt size AxBxC: 150x63xφ10
■Material: Stainless steel
[Kit contents]
U bolt x1Nylon lock nuts x2
Washer x2
Sale price ¥1,800 Regular price¥1,800Regular price ¥1,800Unit price per (excluded_tax) -
Vendor:No Brand
Steel square U bolt kit 150 x 63 x φ10 Trailer parts Boat trailer 0908-00
Vendor:■M10 75x45 square long bolt for pipe
■Bolt size AxBxC: 150x63xφ10
■Material: Steel
[Kit contents]
U bolt x1Nylon lock nuts x2
Washer x2
Sale price ¥800 Regular price¥800Regular price ¥800Unit price per (excluded_tax) -
Vendor:TIGHTJAPAN
TIGHT JAPAN Cosmetic Wheel Nut 0905-01 MAX Trailer TIGHT JAPAN Boat Trailer
Vendor:■1 piece
■Nut only12×1.25p
Socket size: 21mmSale price ¥300 Regular price¥300Regular price ¥300Unit price per (excluded_tax) -
Vendor:J-LINES
Steel Square U Bolt Kit 70 x 63 x φ8 Trailer Parts Boat Trailer 0903-00
Vendor:■M8 50x50 square pipe bolt
■Bolt size AxBxC: 70x63xφ8
■Material: Steel
[Kit contents]
U bolt x1Nylon lock nuts x2
Washer x2
Sale price ¥500 Regular price¥500Regular price ¥500Unit price per (excluded_tax) -
Vendor:J-LINES
Stainless Steel Square U Bolt Kit 70 x 97 x φ10 Trailer Parts Boat Trailer 0902-01
Vendor:■M10 75x45 square pipe horizontal bolt
■Bolt size AxBxC: 70x97xφ10
■Material: Stainless steel
[Kit contents]
U bolt x1Nylon lock nuts x2
Washer x2
Sale price ¥1,000 Regular price¥1,000Regular price ¥1,000Unit price per (excluded_tax) -
Vendor:No Brand
Steel square U bolt kit 70 x 97 x φ10 trailer parts boat trailer 0902-00
Vendor:■M10 75x45 square pipe horizontal bolt
■Bolt size AxBxC: 70x97xφ10
■Material: Steel
[Kit contents]
U bolt x1Nylon lock nuts x2
Washer x2
Sale price ¥600 Regular price¥600Regular price ¥600Unit price per (excluded_tax) -
Vendor:J-LINES
Stainless Steel Square U Bolt Kit 100x88xФ10 Trailer Parts Boat Trailer 09017-01
Vendor:■Bolt size AxBxC: 100x88xφ10
■Material: Stainless steel
[Kit contents]
U bolt x1Nylon lock nuts x2
Washer x2
Sale price ¥1,600 Regular price¥1,600Regular price ¥1,600Unit price per (excluded_tax) -
Vendor:J-LINES
Stainless Steel Square U Bolt Kit 11 0 x 63 x φ10 Trailer Parts Boat Trailer 09016-01
Vendor:■Bolt size AxBxC: 110x63xφ10
■Material: Stainless steel
[Kit contents]
U bolt x1Nylon lock nuts x2
Washer x2
Sale price ¥1,600 Regular price¥1,600Regular price ¥1,600Unit price per (excluded_tax) -
Vendor:J-LINES
Stainless steel U bolt kit 100 x 83 x φ10 trailer parts boat trailer 09015-01
Vendor:■Bolt size AxBxC: 100x83xφ10
■Material: Stainless steel
[Kit contents]
U bolt x1Nylon lock nuts x2
Washer x2
Sale price ¥1,800 Regular price¥1,800Regular price ¥1,800Unit price per (excluded_tax) -
Vendor:J-LINES
Stainless Steel Square U Bolt Kit 97 x 100 x φ10 Trailer Parts Boat Trailer 09014-01
Vendor:■Bolt size AxBxC: 97x100xφ10
■Material: Stainless steel
[Kit contents]
U bolt x1Nylon lock nuts x2
Washer x2
Sale price ¥1,600 Regular price¥1,600Regular price ¥1,600Unit price per (excluded_tax) -
Vendor:No Brand
Steel Square U Bolt Kit 97 x 100 x φ10 Trailer Parts Boat Trailer 09014-00
Vendor:■Bolt size AxBxC: 97x100xφ10
■Material: Steel
[Kit contents]
U bolt x1Nylon lock nuts x2
Washer x2
Sale price ¥700 Regular price¥700Regular price ¥700Unit price per (excluded_tax)