Collection: trailer parts

●Sold separately for left and right (1 piece each) (Please choose left and right when looking from the rear of the trailer.)

●Additional fixing hook ●Mounting plate required for removing the retractable transom tie-down ●Hook compatible with advanced LED combination lamps

■Includes mounting bolts and nuts

Bumper cover for premium package
Material: ABS
Mounting bolt included

●Plating (TOP photo: center)
●Sold as one side (separate left and right shapes)

0754-04 Left side
0754-05 Right side

The belt wound inside the housing can be stretched to any desired length.
Hang the hook on the transom handle (eye) of the boat, wrap it with a ratchet, and secure it.
Unlike regular tie-down belts, there is no need to take them on and off the trailer every time.
Secure to the rear of the trailer using mounting hardware.

●Material: Stainless steel (metal parts)
●Contents: 1 set of 2 pieces
●Belt width: 48mm x length ~ 900mm
●Load capacity: 3000LBS (1360kg)/2 pieces

【please note】
*The hook in the image is not included.
[Mounting hardware is not included. Other company's multi-hook usage example (SRX-143L, SRX-143R)]

It is sold cut into 1m lengths considering the maximum shipping size.
If you paste it on the bank of a trailer, you can load and unload jets, boats, etc. by sliding it.

[Same color/size] Length approx. 1m x width 45mm (top side 40)mm x 4 pieces

As this is an overseas manufactured product, color unevenness and texture may vary depending on arrival time and individual differences. Small scratches occur during the manufacturing and transportation process, and are not subject to product complaints.
Due to the shape of the product, it cannot be bundled with other products.
Up to 2 sets (8 pieces) of the same item can be shipped in one package.

■Helps prevent trailer couplers from falling off and being stolen.

■Can be installed on most types of trailer couplers.

[Product specifications]

■Material: Steel plated

■Pin diameter: 6.0mm

■Pin width: 17mm

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.
●Double stitch width is 30cm, approximately 3 times that of a standard strap. (See photo)

■Application: Winch strap
■Length: 6.0m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N410-45S large hook 4.5m,
*Product number: N420-45S small hook 4.5m,
*Product number: N420-60S small hook 6.0m is also available.

●A convenient ratchet type tie-down belt that does not require cleaning up the belt.
●Transom tie-down made entirely of stainless steel, resistant to corrosion, and retractable with one push.
●Compact size allows you to securely fix PWC.
●The hook part is made of stainless steel coated with resin.

≪Set contents≫
[Product number: 0706-29 2 tie-down bodies] x1
[Product number: 0706-25 Mounting plate & U bolt set] x2

■Material:
Hook part: Stainless steel (resin coating)
Mounting hardware: stainless steel

■Tightening force: 300kg
■Breaking load: 600kg
■Belt length: 1m

■1 point
■Please choose the size you need from 4 different heights.
ST-026-05: 190mm
ST-026-01: 230mm
ST-026-07: 245mm
ST-026-03: 270mm

[Ordered products]

●Left and right sold separately. Sold as 1 piece each.
(Please choose left or right when looking from the rear of the trailer.)

●Additional hook for fixing ●Plate required when installing retractable transom tie-down.
●A hook compatible with advanced LED combination lamps.

■Includes mounting bolts and nuts

Bumper for smoothing bumper cover.

■Material: Steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side

It can be attached to the trailer frame and is an unprecedented dress-up item.
By attaching it to the frame, you can create an overwhelming presence.
It can also be combined with SMD.

●Size: length 520mm x width 58mm x thickness 0.5mm
●With double-sided tape
*The sticker itself is attached using double-sided tape.

Bumper cover for premium package
Material: ABS
Mounting bolt included

●Black (TOP photo: top)
●Sold as one side (separate left and right shapes)

0754-06 Right side
0754-07 Left side

●Color: 4 colors ●Width: 50mm
●Belt length: 5,000mm

Adding a multi-strap function to the hook part reduces damage to the hull!
The functionality has been improved as it can be easily fixed to PWC where hooks are difficult to pass through.

0306-12 Black
0306-13 Red
0306-14 Yellow
0306-15 Blue

【size】
■When rolled: 65×224mm
■When unfolded: 190×224mm

Protects the hull from scratches from ratchets and belts.
Made of the same material as a wetsuit, it is soft and stretchy to fit and protect the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: 2 pieces ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Pat Trailer Parts Boat Trailer Lashing Belt Wet Fabric UNLIMITED

●SOREX NF-1 back lamp. (1 piece)

●Size 100x40x45mm

【set content】
●NO.714256: Transom tie down ●NO.ULT131BK-L x 2: Tie down pad L size (250 x 290mm)

Secure to the rear of the trailer using mounting hardware.
The belt wound inside the housing can be stretched to any desired length.
Hang the hook on the transom handle (eye) of the boat, wrap it with a ratchet, and secure it.
Unlike regular tie-down belts, there is no need to take them on and off the trailer every time.
[Mounting brackets (e.g. SRX-143L, SRX-143R)]

●Material: Stainless steel (metal parts)
●1 set of 2 ●Belt width: 48mm x length ~ 900mm
●Load capacity: 3000LBS (1360kg)/2 pieces *The hook in the image is not included. (Image of use in conjunction with multi-hook made by other companies)

Stainless steel tie-down belt ratchet type automatic winding trailer

Tie-downs are essential for fixing boats, jets, etc. at the transom.

●Material: Steel (metal fittings part)
●1 set of 2 pieces
●Belt width 50mm x length 1.2m

■Helps prevent the trailer coupler from falling off.

■Can be installed on most types of trailer couplers.

■Material: Steel

■Pin diameter: 7.0mm

■Pin length: 65mm

This is a 1500LBS winch with cover made by Fulton, a leading American trailer parts manufacturer, the home of trailers.

Product name: Stainless steel hook winch strap Product number: SRX-149R Red Product number: SRX-149B Blue Product number: SRX-149Y Yellow
Product number: SRX-149K black

High quality winch strap with durable stainless steel hook

Available in 4 colors: red, blue, yellow, and black that stand out as accents.

The loop strap that comes with the hook is a SOREX special specification with a length of 40cm, which is the same as the existing winch strap and is sewn in Japan for peace of mind.

Strap width 50mm x length 6m Center pin included

[Ordered products]

●Narrow type: Uses LEDs with a narrow irradiation range.
●Mounting hole pitch: 50mm
●Look at the trailer from behind and select left or right. (Sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

[Requests and notes when ordering] ---------------------------------------- ----------
*Depending on the model, it may not be possible to install or processing may be required for installation.

Regarding product arrangement, the following will be required.
Please enter the following information in the requests/remarks column when ordering.
●Trailer model name
●Trailer year
● Stamped number (number stamped on the front of the trailer)
Example: In the case of SOREX, it is written as [Oka] ~ [Oka]←

*Please note that as this is a made-to-order item, we cannot accept cancellations, changes, or returns after the order is confirmed (delivery date information).
-------------------------------------------------- ----------------------------

●Bolt diameter size: M10

■The winch and strap set is a great value. Recommended for replacing rusted or broken winches!

■Large hook winch A winch with a strap.

[Product specifications]

■Winch body: Steel chromate plating

■Load capacity: 907kg

■Belt length: 7.5m

■Belt width: 5cm

【size】
■When wound: 90×290mm
■When unfolded: 250x290mm

Protects the hull of your boat from scratches from ratchets and belts.
This large type can easily accommodate large reinforced type ratchets.
Made of the same material as a wetsuit, it is soft and stretchy to fit and cover the hull.
It is convenient because it can be attached after the belt is set on the cargo.
Compared to the type that you put through your belt in advance, it is much easier to use and is recommended.

■Quantity: Set of 2 ■Material (main body): Made of chloroprene ■Installation method: Velcro specification

[Disclaimer]
Due to the patterned design, the design, color, and logo size of each product will vary.
Please note that we cannot accept exchanges or returns unless the product is defective.

Pat Trailer parts Trailer lashing belt Wet fabric

[Compatible models]
Tight Japan MAX trailer: RR single, C-1, A-1, LOPROSS, PROPOSITION

[Kit contents]
Stainless steel U BOLT set Length: 150 x Width: 63 x Bolt diameter: 10 2 pieces
Stainless steel U BOLT set Length: 100 x Width: 60 x Bolt diameter: 10 4 pieces
Stainless steel U BOLT set Length: 100 x Width: 60 x Bolt diameter: 12 4 pieces
Stainless steel U BOLT set Length: 70 x Width: 97 x Bolt diameter: 10 2 pieces
Stainless steel U BOLT set Length: 110 x Width: 63 x Bolt diameter: 10 4 pieces

*If you are installing a wood rail, you will need 4 pieces of 09013-01, and if you are installing a flat rail, you will need 8 pieces of 0903-01.

[U bolt 1 contents]
Two nylon lock nuts and two washers are included with each U-bolt.

There are two holes for attaching parts for Solex PWC trailers from 2013 onwards, vertically on the reflector.

■For trailer installation. With bolt ■Size: 160mm on one side
■Mounting bolt spacing: 65mm

Eliminates the inconvenience when moving a trailer, such as not having a place to hold it, or being in a low position and not being able to use force even if you attach a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

It can be installed if the shape of the bow tower is 45 x 75 and there is an installation space of about 20 cm at the top.
Can be installed on SOREX bow stop kit [Product number: ST-090-02, ST-088-01] *SOREX trailer MB cannot be installed because the bow stop is special.

■Included: 2 sets of mounting bolts (size: Φ10x47x100mm) and nuts

■Towing vehicle side 7-pin type wiring connector kit for lights

■The wiring is a little longer than the conventional kit, and a wiring cover is included.

[Kit contents]
Wiring socket, 2m wiring, 7 connection taps, wiring cover

4Pin
The terminal in the photo is a set of 4 pins each for male and female.
This is the same type of coupler used by KAWASAKI and YAMAHA.

[Compatible models] Kawasaki ULTRA310LX/310LX-S

By using a tie-down kit,
You can easily secure large items such as cooler boxes and portable cans.

■Approximately 40kg load capacity (88lbs load capacity)

【Note】
*Fixed items such as lashings are not included.
*Please do not use this product as it is not intended for use in towing.

[Material] Stainless steel

●Protects the license plate from contact not only when washing the boat but also while driving.
*This is a product to prevent (alert) damage to license plates.
*Do not wash or perform maintenance on the boat with a load applied to the number guard.
(When using with a load, please use a rear jack.)

●Material: Stainless steel

*Please purchase U-bolts for installation separately.

*The image is a still image.

■M8 50x50 square pipe bolt

■Bolt size AxBxC: 70x63xφ8

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

●By adding "stop" to "hang" on the hook part, it is possible to prevent the hook from falling when it is fixed, making it easier and more secure to tie down.

●Belt width: 25mm, Fixed side belt length: 300mm, Winding side belt length: 3,200mm

[The base part has been changed to black]

●Aluminum wheels and handles have grill nipples, so regular lubrication will ensure smooth operation.
●The tires are made of soft rubber and can be moved more quietly.
●Can be removed from the wheel and replaced. [Product number: 0702-01 Replacement tire base]

[Product number: 0702-00]
■Foldable type
■With stopper

■Material: Aluminum
■Maximum load: 360kg
■Stroke: 280mm
■Wheel diameter: 150mm

Resin pin for absorber

●2 pieces set
●Material: ABS + stainless steel (core)
●TIGHT JAPAN genuine

225 tire + wheel set
●Sold in units of 1 piece
●PCD114.3 5H 7J (5 holes)

0501-06 Black wheels

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

★The Viper paint has been changed to a black paint, and the strap has been changed to a loop. ★

■Material Tower, winch: Steel black
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts
*The color has been changed from Viper color to black.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

■Specifications: Vinyl coating
■Length: 600mm (excluding hook)
■Hook part thickness: 10-11mm
■Hook length: 110mm
■Wire thickness: 8φ

[Product specifications]
■Hitch ball diameter: 1.7/8 inches ■Mounting frame width: 50mm compatible ■Maximum towing weight: Class 1, 900kg
■Material: Steel plating

●Tight Japan MAX TRAILER 7-pole harness connector.
●Many types of connectors can be replaced with one touch.
■Material: Aluminum

■サイズ:全長235mmxФ80mm
シャフト径:16.0mm

●Tight Japan MAX TRAILER 7-pole harness connector.
●Many types of connectors can be replaced with one touch.
■Material: Aluminum

■Material: Steel ■Accessories: Chain & electrode connector holder included [Place of use] Attached to the triangular gathering part or coupler part, mainly used for two-boat configurations.

Eliminates the inconvenience of moving a trailer, such as not having a place to hold it, or being in a low position and not being able to apply force even with a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

【Guidance】
*Replacement grips in a variety of colors are also available (sold separately).
(Product number: 0719-02, 0719-03, 0719-04)

Product name: Wiring socket (single item)
Product number: SRX-007

This is a single wiring socket for the towing vehicle side lights.
*Wires and relay connectors are not included.

Product name: Wiring for wiring kit (single item)
Product number: SRX-006-H

This is a single item for wiring and relay connector for towing vehicle side lights .
*Wiring socket is not included.

■Wiring ■Connection tap x 6 pieces

Product name: Extension tongs 2
Product number: SRX-020-L

Length 1870mm

*You cannot drive on public roads or drive with it attached.
*It cannot be installed depending on the trailer model. Please contact us.
*Please let us know the trailer model when ordering.

Product name: Dust cap with rubber cap (1 piece)
Product number: ST-042-G

For hubs with 2 inch inner diameter

*Please let us know the trailer model when ordering.

Product name: Advanced step fender (white)
Product number: ST-123-W

Advanced step fender white (1 piece/side)

The stylish design features steps on the front and back that are convenient for maintenance, allowing you to make your presence known.

*Advanced step fender is black with white paint.
*Please let us know the trailer model when ordering.
*Cannot be installed depending on the trailer model.
Please contact us.

This is a 1500LBS winch with cover made by Fulton, a leading American trailer parts manufacturer, the home of trailers.

Product name: 1500LBS winch with cover Product number: SRX-133

Convenient for moving trailers.

Product name: Coupler handle Product number: SRX-030

One M12 bolt included

*For installation on trailers with inertia brakes,
A separate handle mounting bracket is required.