Collection: electric system

[Applicable model] KAWASAKI Kawasaki 750/800

A plate that shifts the position of the normal pickup coil and advances the ignition timing (6 degrees).
By shifting the ignition timing, performance is improved throughout the entire rotation range from low to high speeds.
Light tuning starts here!

【correspondence】
KAWASAKI 750/800,
YAMAHA 700/760

[Quantity] 1 piece

This plug cap has a frame made of Bakelite, which has excellent heat resistance and flame retardant properties among synthetic resins, and is covered with silicone.
The plug cord insertion port is a screw-in type, and it will bite into the plug cord securely.

【Product Specifications】
■Material: Silicon coating
■Compatible plug cord: Outer diameter Φ7~8mm
■Internal resistance 5kΩ
■Compatible plug: Separate type/screw type (cannot be used with integrated terminal type)
■Angle 90°

【Guidance】
Recommended for use with the company's product "Reinforced Ignition Coil [Product Number: UL23001]"!

[Compatible models]
KAWASAKI Kawasaki 4st ALL
Compatible plug cord: Φ7~9mm

*Delivery time is approximately 2 weeks after ordering.
[Kit contents]
- 4 types of conductive spiral tubes (approximately 340, 500, 600, 700mm),
-Earth cord 180mm x 4,
●Cord clamp x 4,
-Screw M4-12, nut M4, spacer x 4 each
- Cable ties x 8

Conductive spiral tube with special plating.
By installing it, the spark plug voltage of CDI ignition model will increase by about 20%!
It is possible to boost the discharge voltage of the spark plug by wrapping it around the plug cord and grounding it.

When the engine is running, the plug cord constantly generates noise as a reaction to the flow of electricity.
By organizing the noise (magnetic field), the reaction is reduced and a more powerful spark is created.
It brings absolute effects to everything from normal engines to racing engines.

[Compatible models] KAWASAKI 750/800

[Kit contents]
★Digital CDI power unit (product number: UL21001)
★Lightweight duralumin flywheel (product number: JL-K8P-F)

Digital CDI-R power unit and flywheel kit

Suitable for a wide range of users, including Sunday users, race users, and freestyle users. The engine speeds up smoothly from low rotation to high rotation.
The 800g lightweight flywheel promises quick response and can be expected to increase the high rotation range.

Digitally controls ignition timing using a high-performance 8-bit microcontroller
Built-in different ignition timings for MAP1 to 4. It can be changed with a switch.
Since this is a race-specific model, the limiter has been cut.
It has a compact design that fits neatly into an electrical box, and has unparalleled high durability.
In order to cope with the high engine speed due to the use of a lightweight flywheel, the line has been strengthened to ensure that the input signal from the pickup coil is received.
An ignition map that increases torque characteristics at high rpm to avoid torque loss in the high rpm range when using a lightweight flywheel.

■CDI: Made in Japan

■Compatible models: KAWASAKI 750/800

Digital CDI-R power unit.

Suitable for a wide range of users, including Sunday users, race users, and freestyle users.

Ignition timing is digitally controlled using a high-performance 8-bit microcontroller.
It is possible to switch between different ignition timings for MAP 1 to 4 using the built-in switch.
Since this is a race-specific model, the limiter has been cut.
The input line has been strengthened to accommodate high rotation speeds. In addition, the torque characteristics have been increased to high rotation speeds.
Compact design that fits neatly into the electrical box.
We have achieved unparalleled high durability.
■CDI: Made in Japan

【Guidance】
By using the optional lightweight duralumin flywheel (product number: JL-K8P-F), you can expect even more response and improved high rotation range.
(Set part number: UL21001-KF Total Loss Digital System Kit)

[Application] KAWASAKI 750/800 electrical box [Quantity] Blue 1 piece

By replacing the genuine plastic cap, it becomes an accent of the engine room.
With O-ring

[Compatible models] SEA-DOO all models after 2008
SEA-DOO 1503 / 1630 / SPARK external regulator

Genuine product number (OEM): 710001103 etc.

●SGS regulator
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

[Compatible models]
Kawasaki Kawasaki
750/800 engine All
[SXi-Pro / 750SX etc. / 800SX-R / 800X-2]

- Machined aluminum flywheel engine cover
●The surface has a beautiful finish with anodized coating.

【please note】
*The separate oil supply model cannot use the oil pump, so it will be a mixed specification.

[Compatible models]
Yamaha Yamaha 700 / 760 [700SJ('94~) / XL760 etc.]

● Billet aluminum flywheel engine cover.
●The surface has a beautiful finish with anodized coating.

【please note】
*The separate oil supply model cannot use the oil pump, so it will be a mixed specification.

■Compatible models
KAWASAKI 750SX/800SX-R/800X-2

■Accessories: Key, Woodruff

A lightweight flywheel weighing 800g.
Compatible with battery ignition CDI, so it can be used with KAWASAKI 800SX-R (A2~)/800X-2 with genuine CDI.

【please note】
Since the stator is removed during installation, there is no charging function.
This product is not subject to complaints as it is a competition part.

KAWASAKI
750SX
800SX-R
800X-2

●Lightweight flywheel weighing 800g.
●The response of engine revving and rotation return is improved, so acceleration from 0 to 1m is significantly improved, making it a must-have item at the start of a racing scene.
●Improved from previous products to increase durability.
●Compatible with CDI-10R/CDI-R power unit, and when installed at the same time, the pickup will be improved and the response will be linear with throttle work. The strength of the gear has also been increased.
●Compatible with battery ignition CDI, so it can be used with KAWASAKI 800SX-R (A2~)/800X-2 with genuine CDI.

【please note】
Since the stator is removed during installation, there is no charging function.

[Compatible models] KAWASAKI STX-R / Ultra150
[Specifications] Compatible with regular gasoline

This is a purely domestic CDI unit, and we have researched the engine characteristics of STX-R/Ultra150 to achieve the best ignition characteristics.
Easy to install and shortens the time to reach top speed from low speed.

[About installation]
Bolt on.
*Please set according to the engine specifications and driving conditions.

[Compatible models]
KAWASAKI Kawasaki 750/800(A1)
800SX-R (2003) JS800A1,
750SXI (1995-97),
750SX-A1・JS750B1/B2/B3,
750SXI-PRO(1998-2002)JS750C1-5

●Also compatible with normal engines.
●Because it is a reinforced coil, it is tougher than normal, and the price is more reasonable than normal.
●Compatible with genuine product number 21003-3732.

Used for joints of independent wiring in campers, trailers, etc.
The main body can be fixed, and can be easily attached and detached with one touch.

●Cable used
Core diameter: ~5mm (17sq)
Allowable current: 50A

[Adaptation] KAWASAKI 310/300 series
ULTRA310X / ULTRA310LX (-'21) / ULTRA310R / ULTRA310X-SE
ULTRA300X/ULTRA300LX
(There is one extra wire when using 300)

*Not available for 250/260/LX series

[Product name] LIMITER CUT LIMITER CUT

You can release the speed limiter and experience the original top speed with simple connection and installation. Since the stock ECU is used as is, you can enjoy it easily. You won't lose cruise control functionality either.
■With instruction manual

【important】
●This product is planned and manufactured for competition purposes (especially closed races).
●We cannot guarantee any claims regarding the hull, engine, etc., so please be careful when using this product.
●Can be used in conjunction with the separately sold "JL23022 Speed ​​Limiter Cut ON-OFF Switch".

Optional parts for boats equipped with UNLIMITED limiter cut (JL23031)
KAWASAKI ULTRA series 300/310 (-'21)

[Product name] Limiter cut ON/OFF switch LIMITER CUT ON/OFF SWITCH

A 3-way ON-OFF-ON switch allows for normal mode and limiter cut mode.

[Applicable models] KAWASAKI 4-stroke ALL
STX-12F /STX-15F
ULTRA LX/250X/260X/260LX/300X/300LX

[Product name] LED stop lamp kit LED STOP LUMP KIT

[Kit contents]
-LED stop lamp unit x 1,
●Flexible LED lamp x 1,
●Mounting screws x 2

First PWC! This is a brake stop lamp kit exclusively for the KAWASAKI ULTRA series.
It reads the engine speed and turns off when the accelerator is on, and the LED lamp lights up when the accelerator is off.
Since it is always on while idling, you can notify people around you of your boat's presence even from a distance.
The stop lamp included in the kit uses high-brightness LED and boasts high visibility.
The flexible light lens body can be installed anywhere, making it ideal for PWCs with many curved surfaces.
It is also waterproof and durable.

This allows the following boat to slow down when touring etc.
It can be notified quickly and can be expected to be effective in preventing rear-end collisions.

[About installation]
Since it is a coupler on coupler, no special wiring processing is required.
(Lamp and unit connection processing/LED flex lamp installation only)
Attach with double-sided tape on the back of the lamp body.

【Product details】
Unit dimensions: 70×40×35mm
Cord length: Unit power line 300mm
Rotation signal line 1,400mm
Lamp connection wire 2,000mm
Power consumption: 12V 4A
Light dimensions: 110×30×10mm
Cord length: 800m

KAWASAKI 4-stroke ALL
STX-12F
STX-15F
ULTRA LX/250X/260X/260LX/300X/300LX

[Product name] LED stop lamp LED STOP LUMP

[Product contents]
●Lamp body
●Connection terminal
●Mounting screw

【Product details】
Light dimensions: 110×30×10mm
Screw hole: 6.5mm
Cord length: 800m

A highly water resistant and durable LED lamp with a flexible lens body.
The compact body allows installation anywhere, and it is very easy to install on curved surfaces using strong adhesive tape.
By lighting up the LED lamp, when touring, etc., you can quickly notify following boats of a slowdown, and can be expected to be effective in preventing rear-end collisions.
You can also notify people around you of your boat's presence from a distance.
Adopts high-brightness LED and boasts high visibility.
A flexible light lens body that can be installed anywhere is ideal for PWC.

[Regarding installation] Please install using the double-sided tape on the back of the lamp body.

[Information] If you are looking for a lamp unit, please use [Product number: JL23011].

[Compatible models]
YAMAHA YAMAHA SHO

●This product is designed to adjust the AFR (air fuel ratio/fuel mixture ratio).
This is a unit that controls the fuel injector.

[Compatible models]
SEA-DOO 4TEC

●This product is designed to adjust the AFR (air fuel ratio/fuel mixture ratio).
This is a unit that controls the fuel injector.

[Compatible models]
KAWASAKI Kawasaki ULTRA300

●This product is designed to adjust the AFR (air fuel ratio/fuel mixture ratio).
This is a unit that controls the fuel injector.
●Adjustable ignition module (sold separately) [Product number: 6-102, list price ¥57,000 excluding tax] is required.

[Compatible models]
KAWASAKI Kawasaki ULTRA300

●This product is designed to adjust the AFR (air fuel ratio/fuel mixture ratio).
This is an IG module to control the unit that controls the fuel injector.
●Adjustable and must be used in conjunction with CMDM.

[KAWASAKI]
STX-12F (2004)
ULTRA LX (2012-2016)

[Outlet reason] Special price for stock replacement

*SEADOO genuine, new, unused product
*There may be packaging defects as this is a warehouse stock item.
*Returns and exchanges are not possible as this is a special price item.

[KAWASAKI]
750ZXI (1995)

[Outlet reason] Special price for stock replacement.

*Genuine, new, and unused KAWASAKI products
*There may be packaging defects as this is a warehouse stock item.
*Returns and exchanges are not possible as this is a special price item.

●SEA-DOO 800 - 1503 regulator
*Equivalent to genuine part number 278001969

Cheaper than genuine parts! !

[Compatible model]
3D RFI ('05)
3D DI ('06-'07)
GTI/GTI SE ('06-'07)
GTX 155 ('02-'07)
RXP 215 ('04-'07)
RXT 215 ('05-'07)

●SEA-DOO SPARK / 1503 regulator
[Compatible models] All models after 2008
*Equivalent to genuine part number 710001103

Cheaper than genuine parts! !

[Compatible model]
SPARK ('14~)
GTI SE ('08~)
GTI SE 155 ('08~)
GTR215 ('12~)
GTX155 ('08~)
WAKE PRO 215 ('09～)
RXP-X 260/255 ('08~)
RXT-X 260/255 ('08~)

[SEA-DOO]
SPX (1996)

[Outlet reason] Special price for stock replacement.

*SEADOO genuine, new, unused product
*There may be packaging defects as this is a warehouse stock item.
*Returns and exchanges are not possible as this is a special price item.