Collection: others

[Compatible models] SEA-DOO ST3 Hull
*RXT-X300/GTX-L300 '18 or later

[Quantity] 1 set of 10 parts
[Material] Stainless steel
[Thickness] 1.5mm

Washer used for the seat base engine cover of SEA-DOO ST3 Hull series.
Prevents digging into the genuine engine cover when tightening it, making it ideal for accent parts!

[Compatible] SEA-DOO X series sponson (S3 hull / GTI hull after 2011)

[Quantity] 10 pieces
[Material] Stainless steel
[Size] 3mm

Oval washer used for SEA-DOO X series sponsons.
Reinforces the genuine sponsons and is also used as an accent part of the sponsons.

[Compatible models] SEA-DOO SPARK

[Quantity] 25 pieces
[Material] Stainless steel
[Size] 4mm

The genuine washer (291003880) used on the body of SEA-DOO SPARK is made of plastic and may break depending on the number of times it is used, so we recommend replacing it with this kit during maintenance.

Two pieces of this kit are required to replace the washer on a SPARK 1 boat.
★Total number used: Front body x 8, rear body x 16, center body x 21 (2) = 47 in total

SOREX hitch sticker
■Size: 157×33mm
■Sold in units of 1 piece

STKS01-BKHA

Reef Walker boots are designed for safe walking in the ocean and on reefs.
・Ultra-light 1mm neoprene material ・Rubber sole: Non-slip and resistant to cuts from leaves ・Ventilated mesh upper: Adopts breathable material designed with air flow in mind ・Mesh case included

■Size guide (US inch/cm)
S: US 7-8/25-26cm
M: US 8-9/26-27cm
L: US 9-10/27-28cm

*Size may vary greatly depending on product design, so please use this as a guide only.

A slip and scratch prevention protector made of EVA mat.
Made of the same material as the deck mat, it is essential for preventing scratches from ratchet parts such as belts.

■Quantity: 1 set of 2 ■Material: Made of EVA mat ■Size: 100 x 230mm

●This is an anchor set that can be easily made by filling the anchor back with sand or stones.
●After use, it can be folded and stored compactly.

■Adaptation: For PWC or small jet boat
■Rope length: Approximately 450cm (with soft float)

■Contents: 420ml spray can

Excellent rust prevention properties for metals

For loosening rusted bolts and nuts.
Excellent water displacement performance, suitable for maintenance after riding in the rain on motocross cars and general cars.
Please use it for lubrication and rust prevention of various moving parts during vehicle delivery.
It can also be used as a moisture barrier for battery terminals, spark plugs, starter motors, etc.

■Contents: 420ml spray can

Dirt removal and shine wax.
Contains ultra-fine particle compound.
It removes dirt and repairs even minute scratches without adversely affecting dark painted surfaces.
It also maintains a strong gloss with high quality silicone wax.

You won't want to let go of the melt-in-your-skin texture! A warm blanket made of fleece material!

The design can be used by both men and women.
It's a convenient size that can be buttoned up to make it look like a poncho, and can also be wrapped around your waist on cold days.
When used as a lap blanket, it is slightly larger, approximately 100 x 140 cm, so that the lower half of your body can fit comfortably in it.
Great for relaxing at home, in the office, in the car, or outdoors.
A warm and cold weather item that is also recommended as a winter gift.

It has a texture that you won't want to let go of once you wrap it up.

■Material: 100% polyester

■Size: 100x140cm

[Model is 170cm tall]

Material: Main body = SCS13 (equivalent to SUS304)

Size: d=12 L=84 L1=60 B=48 B1=24 B2=42 T=12 D=24

Thread diameter: W1/2

Weight: 250g

Working load: 400kg

Material: Main body = SCS13 (equivalent to SUS304)

Size: d=10 L=70 L1=50 B=40 B1=20 B2=35 T=10 D=20

Thread diameter: W3/8

Weight: 150g

Working load: 320kg

Material: Main body = SCS13 (equivalent to SUS304)

Size: d=8 L=56 L1=40 B=32 B1=16 B2=28 T=8 D=16

Thread diameter: W5/16

Weight: 80g

Working load: 220kg

Material: Main body = SCS13 (equivalent to SUS304)

Size: d=6 L=42 L1=30 B=24 B1=12 B2=21 T=6 D=12

Thread diameter: W1/4

Weight: 35g

Working load: 140kg

Material: Main body = SUS304

Size: d=10 L=110 L1=90 B=48 B1=28 S=13

Weight: 140g

Working load: 150Kg

Material: Main body = SUS304

Size: d=10 L=80 L1=60 B=44 B1=24 S=18

Weight: 100g

Working load: 70Kg

Material: Main body = SUS304

Size: L=72 L1=55 B=39 B1=22 S=18 T=7

Weight: 60g

Working load: 50Kg

AK Spring Hook with Eye

Material: Body = SUS316 Spring = SUS304

6mm: d=6 L=60 L1=48 B=35 S=12 D=9, weight: 30g, working load: 70Kg
8mm: d=8 L=80 L1=64 B=46 S=18 D=12, weight: 70g, working load: 150Kg
10mm: d=10 L=100 L1=80 B=56 S=21 D=15, weight: 135g, working load: 200Kg
12mm: d=12 L=120 L1=96 B=68 S=25 D=18, weight: 232g, working load: 300Kg

It can be used anywhere with easy one-touch mooring even when JET is mooring.

■Material: Plastic material
■Rope hole diameter: 8mm

【set content】
●NO.714256: Transom tie down ●NO.ULT131BK-M x 2 pieces: Tie down pad M size 2 pieces

Secure to the rear of the trailer using mounting hardware.
The belt wound inside the housing can be stretched to any desired length.
Hang the hook on the transom handle (eye) of the boat, wrap it with a ratchet, and secure it.
Unlike regular tie-down belts, there is no need to take them on and off from the trailer every time.

[Mounting brackets (e.g. SRX-143L, SRX-143R)]

●Material: Stainless steel (metal parts)
●1 set of 2 ●Belt width: 48mm x length ~ 900mm
●Load capacity: 3000LBS (1360kg)/2 pieces

*The hook in the image is not included.
(Image of use in conjunction with multi-hook made by other companies)

Tie-down belt ratchet type automatic winding trailer

[Reason for outlet]
●Due to the characteristics of the product, there may be some wobbling. (See photo)
●Please understand that if you have multiple items, this is just an image.
●It is a new product with no problems in use, but please refrain from purchasing if you are concerned about its appearance.

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications, as we only provide the information listed.

[Product specifications]
■Material: Steel
■Compatibility: American class 3, mount lock pin diameter: 16mm
■Square type width: 50mm square type
■Maximum traction force: 1575-2000kg
■Hitch ball shaft diameter: 25mm
■Drop: 2 inches
■Size: Please refer to image number 4.
(Please use this as a guide as there are individual differences)

TIGHTJAPAN Chubby Air Pump

Related products [Product number: 0715-92] Chubby body + pump set [Product number: 0715-91] Chubby body only

Mooring Jet Ski PWC Personal Watercraft Boat
boat ship anchor rope mooring marker landmark
water bike personal watercraft

It is a must-have item for touring, as it can be used as a marker when floating, or as an airbag when placed in a box.
By eliminating space in the storage box, damage to the inside of the storage box is reduced.
You can also use it as a floating marker to see your anchoring point at a glance.

*Also available for sale individually.
[Product number: 0715-91] Chubby body [Product number: 0715-93] Pump

Mooring Jet Ski PWC Personal Watercraft Boat
boat ship anchor rope mooring marker landmark
water bike personal watercraft

●Chubby body only

It is a must-have item for touring, as it can be used as a marker when floating, or as an airbag when placed in a box.
By eliminating space in the storage box, damage to the inside of the storage box is reduced.
You can also use it as a floating marker to see your anchoring point at a glance.

*Value sets are also available.
[Product number: 0715-92] Main unit + pump set [Product number: 0715-93] Pump only

Mooring Jet Ski PWC Personal Watercraft Boat
boat ship anchor rope mooring marker landmark
water bike personal watercraft

[Compatibility]
GTR230 (2020 and later) / GTI130 (2020 and later)

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

*A rod holder that can be attached to the optional LINQ COOLER 51L (#269800817).

●Upgrade hardware kit essential for using LinQ bag TUNNEL BAG (product number: 860201740) in seawater.

●LinQ hardware kit includes highly corrosion-resistant stainless steel parts

●Easy and quick installation

*Standard equipment for LinQ Cooler cooler box

[Compatibility]
RXT, RXT-X, GTX and WAKE Pro(2018)

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Please use it for FISH PRO / GTX models without audio after 2018 or when the audio is broken.

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Convenient for charging mobile phones, wearable cameras, etc.

●This excellent device detects the amount of current required for proper charging time, and prevents devices from overcharging.

●2018 - Standard equipment on GTX Limited300 model.

A cost-effective vest with a combination of soft neoprene material and a zipper on the front side that emphasizes the fit.
The neoprene material on both sides prevents chafing and is comfortable to wear.
It has a simple design that is easy to put on and take off.

OK as a marine sports vest for towing play such as wakeboarding, SUP, and banana boats!
Free one size

■Applicable chest size: Approximately 90-100cm

■Material: Chloroprene fabric PE foam, polyester, polyurethane

[Caution] This product is not applicable for ship inspections and is intended to assist with buoyancy during leisure activities in Shinagawa or the sea.
This is not a marine rescue life jacket approved by the Ministry of Land, Infrastructure, Transport and Tourism.

Wakeboarding Wakesurfing Kiteboarding Surfing Bodyboarding
SUP SUP Paddleboard Flyboard Snorkeling Trekking
Kayak Canoe Marine Sports Marine Activities Banana Boat
Windsurfing WAKEBOARD SURF WATERTOY Rubber boat ZUPBOARD
Sports Vest Impact Vest Segment

Rubber belt with spare hook
*For motor support (product number: 21990, 21988, 24583)