Collection: 純正/社外 部品：社外部品

[Compatible models] Sea-Doo
SEA-DOO 4-stroke 260/255/230/215/185/155/130 horsepower model (up to 2017)
*Excluding SPARK 2018 and later models

●Genuine part number OEM 420956741

■SGS external oil filter + external O-ring ■This is a set product of oil filter + O-ring.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[Compatibility] Stainless steel carrying can (JL15006-20/JL15006-25)

From the popular American brand VP Racing Fuel,
Convenient goods that prevent gasoline from boiling over with just one touch are now available!

VPTrigger is a patented
Equipped with push-button self-vent control flow valve
Revolutionary refueling goods.

The installation and operation method is very easy, just tilt the carrying can.
Simply press the trigger button to refuel and release the button to quickly stop refueling.

The unique design prevents fuel from spilling onto expensive vehicles, graphics, the ground, or the sea surface, and by attaching it to a stainless steel carrying can that complies with the Fire Service Act, the amount of refueling can be adjusted with a single touch.

Of course, we can minimize the gasoline spills that occur every day.
A must-have item for making pit stops in endurance races as quickly and safely as possible!

If you have this, you can use it when carrying cans.
Gasoline will not spill even if you carry it with the hose attached! !

【accessories】
・VP trigger body
・Billet adapter

●An adapter used when washing engines such as KAWASAKI and SEA-DOO.

●Can be used with Salt Away's dedicated mixer with just one touch.

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

[Compatible models] SEA-DOO
●300 horsepower model & 2018 and later models (*Genuine product number 420956744 equivalent product)
●260/255/230/215/185/155/130 horsepower model (-2017) (*Genuine part number 420956741 equivalent)

*Excluding GTI90/SPARK

・・・
This is an aftermarket oil filter with excellent cost performance at a lower price than the genuine product.
■Accessories: 1 each of thin O-ring, thick O-ring, and small O-ring

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, due to repeated use over a long period of time, engine oil becomes dirty and deteriorates.
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

■For MIKUNI ■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use. Please note.

006-9050 50
006-9052 52.5
006-9055 55
006-9057 57.5
006-9060 60
006-9062 62.5
006-9065 65
006-9067 67.5
006-9070 70
006-9072 72.5
006-9075 75
006-9077 77.5
006-9080 80
006-9085 85

■Helps prevent trailer couplers from falling off and being stolen.

■Can be installed on most types of trailer couplers.

[Product specifications]

■Material: Steel plated

■Pin diameter: 6.0mm

■Pin width: 17mm

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.
●Double stitch width is 30cm, approximately 3 times that of a standard strap. (See photo)

■Application: Winch strap
■Length: 6.0m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N410-45S large hook 4.5m,
*Product number: N420-45S small hook 4.5m,
*Product number: N420-60S small hook 6.0m is also available.

●This is a lashing kit for securing a stainless steel portable container to the rear deck of a PWC.
●Comes with a high-quality EVA mat and lashing belt to prevent scratches on the hull when securing the portable can.
●The EVA mat is CNC machined to prevent the tank from slipping.
●Both the ratchet and gunwale hook sections are made of stainless steel to prevent rust.
●Vertical 20L/25L gasoline cans (JL15006) can be loaded on the rear deck.

■Kit contents: 1 gasoline can
・EVA mat × 1
・Gunnel hook × 2
・2 ratchet lashing belts

[Installation precautions]
*Approximately 300mm of space is required in front and behind the deck surface.
* Boats with R-shaped gunwales cannot be used.

●Portable can specifications ■Material: Body/stainless steel Cap/aluminum ■Size: Width 255 x Length 360 x Height 320 mm
■Accessories: Aluminum cap, nozzle hose, vent bolt (all assembled)
■Instruction manual

●This is a gasket parts set for overhauling the carburetor.
●Please use it for regular cab overhaul.
●It is for one cylinder.

Please choose from below.

----------------------------------------------
[1] 006-346 MIKUNI for SBN 38/44/46mm
[Compatible models]
SEA-DOO: 580/650/720/800(GTI/SPX)
YAMAHA Yamaha ：650/700/760/1100/1200 Non-Power Valve(SJ/GP)
KAWASAKI Kawasaki: Sxi/SxiPro/800X2/800SX-R

[2] 006-352 I-series for MIKUNI S-BN
[Compatible models]
YAMAHA Yamaha: GPR/GP800/GP800R/XL-L/XLT (66E/66V/67X)

[3] 006-351 MIKUNI SBN Seadoo for I-series
[Compatible models]
SEA-DOO: 951

Made of PU (polyurethane) material, it is soft to the touch.
Protects from accidents such as shin guards.
hitch ball cover

■Material: PU material
■Correspondence:
Ball size 1-7/8 inch / 2 inch common

[Essentials for changing engine oil! ]
●Powerful vacuum sucks up fluids.
●Suitable for suctioning oil, water, etc. in any situation and location.
●It also has a pressure change function with a hand pump, so all you need is space to move the handle up and down.
●When using the handle, pump around 10 times and then continue suction automatically.
In addition, it is equipped with an air valve as standard, so if you have a compressor,
By connecting to an air valve, suction can be performed with increased suction power, so no effort is required.
●Complete equipment perfect for pro shops.
●Vacuum effect is required, such as changing oil in cars and motorcycles, draining water from water tanks, etc.
Can be used in any situation.
-With scale that allows you to see the amount removed at a glance

[Disclaimer]
This product is imported from overseas, so a Japanese instruction manual is not included.

[Included hose size]
Small: outer diameter approx. 5.8 mm (inner diameter 4 mm) x length approx. 82 cm
Medium: Outer diameter approx. 6.7mm (inner diameter 5mm) x length approx. 82cm
Large: Approximately 9.8 mm outer diameter (8 mm inner diameter) x 98 cm length

It is effective for use in sandy areas, and is held in place by the weight of the anchor itself rather than being hooked to the ocean floor (river bottom).
The surface is coated with PVC, making it an easy-to-handle anchor that prevents scratches and rust on the hull.

[Product specifications]
■Weight: 3kg
■Material: PVC coating ■Applicable to: PWC, rubber boats, bass boats, etc. ■Size: Approximately Φ15cm x body height approximately 17cm (excluding shackle)

【please note】
*Please check the tightness of the shackle before each use.
*If it is loose, please be sure to tighten it before use as it may cause it to come off. *As this is an overseas manufactured item, there may be unevenness in the PVC coating.

[Shipping information] Combining other products is not possible.

■It is very convenient when the tie-down belt hook cannot be hung or the belt cannot reach, such as when transporting a jet loaded on a trailer.

■You can loop it and hang it on the hook anywhere.

■Quantity: 2 pieces 1 set

■Total length: 50cm

This spring is
Reducing the tension improves throttle response, but it also makes it more likely to burn due to vibration, etc.
If you make it stronger, it will have the opposite effect.
As the g number increases, the tension becomes stronger.

BELLOW

SEA-DOO genuine part number (OEM): 268000186 etc. IBR boots for SEA-DOO
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.
*The location used is number 50 in the third photo.

[Applicable] SEA-DOO 4-stroke pump diameter 161mm (for 300/230 horsepower)

● BRP genuine part number 267000917

●SGS Wear●An inexpensive aftermarket repair part with performance equivalent to that of an original part.

[Disclaimer] Product colour may vary depending on time of arrival.

[Applicable models] SEA-DOO 4-stroke

●Genuine part number (OEM): 278003828 (old part number: 278002822)

●SGS 30Amp relay●This is an inexpensive aftermarket repair part with performance equivalent to the original part.

[Compatible models] SEA-DOO
SPARK
GTI SE 90
(*Equivalent to genuine product number 420956123)

This is an aftermarket oil filter with excellent cost performance at a lower price than the genuine product.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.
●Double stitch width is 30cm, approximately 3 times that of a standard strap. (See photo)

■Application: Winch strap
■Length: 6.0m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N420-45S small hook 4.5m
*Product number: N410-45S large hook 4.5m
*Product number: N410-60S large hook 6.0m is also available.

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: Approximately 155mm
■Screw length: Approximately 75mm
■Below the neck: approx. 85mm
*Please note that there may be size errors due to individual differences.

■Towing vehicle side 7-pin type wiring connector kit for lights

■The wiring is a little longer than the conventional kit, and a wiring cover is included.

[Kit contents]
Wiring socket, 2m wiring, 7 connection taps, wiring cover

●Sold in units of 1 piece.

Used to adjust the amount of fuel supplied within the carburetor.
The larger the size, the greater the supply.

Product number/size
006-360/1.5
006-361/2.0
006-362/2.3
006-363/2.5

●Easy to purchase and economical, essential for improving engine durability.

[Compatible models] KAWASAKI 800 / 750 (excluding 92-99Zxi) / 650 (86-96)
Kawasaki SC 650 1991-1995
Kawasaki SX 650 1987-1993
Kawasaki TS 650 1989-1996
Kawasaki X2 650 1986-1995
Kawasaki SS 750 1992-1997
Kawasaki SSXI 750 1993-1997
Kawasaki SX 750 1992-1995
Kawasaki SXi 750 1995-1996
Kawasaki SXI Pro 750 1998-2002
Kawasaki Xi Sport 750 1998-1999
Kawasaki SX-R 800 2003-2011

[About the product]
Colors may vary depending on arrival time.
Please note that colors may not be available due to stock availability.

[Compatible model] YAMAHA 1200ALL(65U)

Yamaha GP1200 1997-1999
Yamaha SUV1200 2000-2002
Yamaha XL1200 1999

[Compatible model] SEA-DOO pump diameter 155.5mm
[Representative model] GTX 4-TEC ('02-'03)/951 model

●WSM wear ring 155mm
●OEM #271000653

【please note】
Colors may vary depending on arrival time. Thank you for your understanding.

■Material: Brass
JL003-7: 1/4×1/14 90° Thread part 13mm: P1.25: Outer diameter 13.5mm
JL003-8: 1/8×1/8 90° Threaded part 10mm: P0.9: Outer diameter 10mm)

■The winch and strap set is a great value. Recommended for replacing rusted or broken winches!

■Large hook winch A winch with a strap.

[Product specifications]

■Winch body: Steel chromate plating

■Load capacity: 907kg

■Belt length: 7.5m

■Belt width: 5cm

[Compatible models]
Tight Japan MAX trailer: RR single, C-1, A-1, LOPROSS, PROPOSITION

[Kit contents]
Stainless steel U BOLT set Length: 150 x Width: 63 x Bolt diameter: 10 2 pieces
Stainless steel U BOLT set Length: 100 x Width: 60 x Bolt diameter: 10 4 pieces
Stainless steel U BOLT set Length: 100 x Width: 60 x Bolt diameter: 12 4 pieces
Stainless steel U BOLT set Length: 70 x Width: 97 x Bolt diameter: 10 2 pieces
Stainless steel U BOLT set Length: 110 x Width: 63 x Bolt diameter: 10 4 pieces

*If you are installing a wood rail, you will need 4 pieces of 09013-01, and if you are installing a flat rail, you will need 8 pieces of 0903-01.

[U bolt 1 contents]
Two nylon lock nuts and two washers are included with each U-bolt.

●SEA-DOO Pump Repair Kit

The genuine SEA-DOO part number (OEM) is as follows: ① 267000900 Angle bearing
② 293300086 O-ring Quantity: 2
③ 271002071 Seal
④ 293370038 Circlip
⑤ 293200089 Oil seal Quantity 2
⑥ 293300090 O-ring

SEA-DOO 4 stroke
●Genuine part number (OEM): 420851754

●SGS spark plug pipe
●For 1 cylinder
●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

[Compatible models] SEADOO
●Genuine parts (OEM: 420950820)

●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

4Pin
The terminal in the photo is a set of 4 pins each for male and female.
This is the same type of coupler used by KAWASAKI and YAMAHA.

[Applicable models] KAWASAKI 650/750/800
[Quantity] 2 pieces

●It has better vibration absorption properties than the genuine product and has improved sealing.
●This gasket is more economical than genuine products.
●It has a shape that increases the flow rate compared to the normal water flow, demonstrating cooling efficiency.
●Top grade gasket made in Japan

■For PWC runabout boats

A new beach stand that can be easily assembled by simply inserting a pin is now on sale.
This type is compatible with runabout models.

The frame is made of aluminum material that is 1.5 times thicker than regular aluminum and has excellent strength.

The rail (the part that contacts the bottom of the ship) is made of reinforced plastic and has excellent corrosion resistance, strength, and water resistance.
"Does not absorb water! Will not rot! Will not rust! Will not peel or hang!" This is the ideal beach stand.

- When assembled: total length 1210 x width 710 x height 345 mm (inner width of the bar part on which the hull is placed 360 mm, outer width 440 mm)
●Body weight: Approximately 13kg

[Product precautions]
●Cannot be shipped together with other products (to prevent scratches and damage)
●There may be small scratches due to friction during transportation, etc.

■M8 50x50 square pipe bolt

■Bolt size AxBxC: 70x63xφ8

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

●The buckle and ratchet part have been made more durable.
●Equipped with a function to prevent the hook from coming off.

■Belt size: width 25mm x length 4.5m
■Belt length from ratchet to S hook: Approximately 30cm
■Hook diameter: Ф10 (10mm)

Rudder for watercraft or boats.
Easy to get on and off watercraft and boats.
Easy to install and easy to store.

■Total length approximately 1M

■A set of trailer coupler lock key and ball mount lock key.

■The key is unique. (The key for the coupler lock and the key for the ball mount lock are different.)

[Coupler lock key]
■Helps prevent trailer couplers from falling off and being stolen.
■Material: Steel (chrome plated)
■Pin diameter: approx. 6.4mm
■Keys: 2 pieces

[Ball mount lock key]
■Helps prevent the ball mount from falling off and being stolen.
■Material: Steel
■Pin size: approx. Ф16mm x 70mm.
■Compatible with: TIGHTJAPAN, SUNTREX, SOREX, class 3
■Keys: 2 pieces

■Trailer side 7-pin type wiring socket for lights

■This item is made of durable reinforced plastic instead of the conventional aluminum part.

■Made of reinforced plastic, it is inexpensive but has sufficient strength and is also extremely lightweight.

■Material (body): Reinforced plastic

■Compatible with: TIGHTJAPAN, SOREX, SUNTREX

*Wiring sold separately

■7-pin type wiring socket for lights on the towing vehicle side

■This item is made of durable reinforced plastic instead of the conventional aluminum part.

■Made of reinforced plastic, it is inexpensive but has sufficient strength and is also extremely lightweight.

■Material (body): Reinforced plastic

■Compatible with: TIGHTJAPAN, SOREX, SUNTREX

*Wiring sold separately

■Used when attaching the ball mount to the hitch member.

■Easy to install, can be installed with one touch, and locked with a clip.

■Lock pin for ball mount

■Made of steel plating

■TIGHT JAPAN, SUNTREX, SOREX, class 3 compatible

■Size: Ф16x75mm

■Used when attaching the ball mount to the hitch member.

■Easy to install, can be installed with one touch, and locked with a clip.

■Class II (32x32) lock pin for ball mount

■As it is made of stainless steel, it is a rust-resistant item.

■Size: Ф12.7mmx65mm

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 165mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 50mm

*Please note that there may be size errors due to individual differences.

Steel neck 50mm

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: Approximately 165mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 50mm

*Please note that there are individual differences in size, so please use this as a guide.

■Type: Long type
■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 165mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 46mm
*Please note that there may be individual differences in size.

■Type: Long type
■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 135mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 25mm
*Please note that there are individual differences in size.

■Type: Long type
■Material: Stainless steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: Approximately 135mm
■Shaft length: approx. 45-50mm
■Below the neck: approx. 23mm

■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 19mm
■Total length: 115mm
*Please note that there are individual differences in size.

■Material: Steel
■Ball size: 2 inches
■Shaft diameter: 25mm
■Total length: 115mm
*Please note that there are individual differences in size.