Collection: Electrical components

●A stainless steel bracket for fixing navigation lights to pipes, etc.
●You can adjust the angle and install it horizontally even on a sloped wall.

●Bracket for Ibuki Kogyo navigation light “NAUTILIGHT NAVI”
●Adaptation: For 25φ pipe
●Material: Stainless steel SUS316 (main body), SUS304 (attached metal fittings)

【please note】
*Only the bracket is included, and the screws and rubber gaskets that secure the main body and navigation light are not included.

●Stainless steel bracket for fixing navigation lights to pipes, etc.

●Bracket for Ibuki Kogyo's navigation light "NAUTILIGHT NAVI"
●For diameter 25φ pipe
●Material: Stainless steel SUS316 (main body), SUS304 (attached metal fittings)

【please note】
*Only the bracket is included, and the screws and rubber gaskets that secure the main body and navigation light are not included.

●Stainless steel bracket for fixing navigation lights to pipes, etc.

●Bracket for Ibuki Kogyo's navigation light "NAUTILIGHT NAVI"
●Mounting part diameter: 68mm
●For diameter 25φ pipe
●Material: Stainless steel SUS316 (main body), SUS304 (attached metal fittings)

【please note】
*Bracket only; screws and rubber gaskets to secure the main body and navigation light are not included.

●This is a light that is attached to the bow part of a ship. *For ships with a total length of less than 12m

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Model: MLB-5AB2

●Type approval number No. 5300

●Light source: LED

●Rated voltage: 12V/24V・Rated power: 2W

●Size: Ф90×H61mm

●Made by Koito Seisakusho Co., Ltd.

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Advanced technology condensed into a small body!

●Machine-cut heat dissipation plate: A beautiful heat dissipation plate machine-cut from high-strength aluminum and specially treated to efficiently dissipate the heat generated by the LED, achieving an LED unit life of approximately 60,000 hours.

●High light-shielding performance: Based on our unique theory, all parts are placed with high precision to achieve complete light-shielding.

●Wide power supply voltage compatible: The LED unit supports a wide power supply of DC10 to 30V. Built-in stabilization circuit completely absorbs voltage fluctuations.

●Excellent weather resistance and impact resistance: The housing is made of polycarbonate resin. The metal parts are also made of highly weather-resistant materials to ensure high durability and reliability.

●Replaceable LED unit: By replacing the unit at the specified LED time (approximately 60,000 hours), maximum performance can always be achieved.

●Low power consumption: We have succeeded in significantly reducing power consumption by switching to LED. Cut power consumption by up to 90%.

●Installation compatibility: Compatible with conventional Koito products at the same pitch and can be easily replaced.

●GOOD Design GOOD Quality: Winner of the 2013 Good Design Award. made in Japan.

●The size is Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50), the weight is 0.2kg, and the mounting pitch is the same as the old standard Koito Seisakusho type.

*The special packing (product number: 35269) sold separately is a vibration-proof rubber packing that is installed between the boat light and the installation pedestal, etc., and is recommended to be installed to prevent damage to the main unit. The main body has a waterproof structure.

【 specification 】
Manufacturer: Ibuki Kogyo Co., Ltd.
Model: NLST-2Y
Light source: LED
Power supply voltage: DC10V to 30V
Power consumption: 3W
LED unit life: about 60000 hours
Protection grade: IP56
Dimensions: Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50, same as conventional Koito products)
Weight: 0.2kg

[Product specifications]
●12V power can be easily extracted from the cigarette lighter socket and terminal.

●Compatible with taking out electric power! This is a new type of battery BOX whose main terminal has a 60A circuit breaker.

●In accordance with modern needs, it is also equipped with a USB charger socket.

●Equipped with a battery level gauge, so you can conveniently check the remaining battery level with the touch of a button without having to open the lid.

●Socket type: Cigarette lighter (1 burner), USB (2 burners)
●USB socket specifications: Output voltage (DC5V)/Output current (2.1A)
●Built-in breaker: 10A (cigar socket)/60A (main terminal)
●Breaker type: manual reset
●Compatible battery: For 105A or less
-External dimensions: W420 x D230 x H335mm
-Inner dimensions: W340 x D190 x H225mm
(There is a protrusion on the back of the lid to hold the battery in place.)

*If more than the specified current flows, the breaker will operate and shut down the current.
After tripping the breaker, wait a sufficient amount of time before pressing the reset button.

●Press the start switch for 2 to 4 seconds to automatically start suction and drainage, and when drainage is complete, the motor will automatically stop, so there is no need to worry about dry running.

●Voltage: 24V

●Press the start switch for 2 to 4 seconds to automatically start suction and drainage, and when drainage is complete, the motor will automatically stop, so there is no need to worry about dry running.

●Voltage: 12V

●It is a navigation light that is raised when a ship's operation becomes inconvenient.

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Model: MLE-4B2

●Type approval number No. 5186

●Light source: light bulb

●Rated voltage: 24V・Rated power: 30W

●Size: Ф90×H109mm

●Made by Koito Seisakusho Co., Ltd.

*Two Class 2 Red Lanterns are required. (Excluding those with a total length of less than 12m) Also, this is a sign that is displayed when operation is inconvenient, and please do not use it for any other purpose.

●It is a navigation light that is raised when a ship's operation becomes inconvenient.

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Model: MLE-4A2

●Type approval number No. 5185

●Light source: light bulb

●Rated voltage: 12V・Rated power: 30W

●Size: Ф90×H109mm

●Made by Koito Seisakusho Co., Ltd.

*Two Class 2 Red Lanterns are required. (Excluding those with a total length of less than 12m) Also, this is a sign that is displayed when operation is inconvenient, and please do not use it for any other purpose.

●Class 2 tricolor lights and Class 2 white lights apply to sailing vessels less than 12m in total length.

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Model: MLC-4AB2

●Type approval number No. 5187

●Light source: LED

●Rated voltage: 12V/24V・Rated power: 8W

●Size: Ф111×H282mm

●Made by Koito Seisakusho Co., Ltd.

●This is a light that is attached to the stern (stern) part of a ship.

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Model: MLS-4AB2

●Type approval number No. 5182

●Light source: LED

●Rated voltage: 12V/24V・Rated power: 2W

●Size: Ф90×H61mm

●Made by Koito Seisakusho Co., Ltd.

●This is a light that is attached to the mast of a ship.

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Model: MLM-4AB4

●Type approval number No. 5181

●Light source: LED

●Rated voltage: 12V/24V・Rated power: 2W

●Size: Ф90×H61mm

●Made by Koito Seisakusho Co., Ltd.

●This is a light that is attached to the mast of a ship.

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Model: MLM-4AB3

●Type approval number No. 5184

●Light source: LED

●Rated voltage: 12V/24V・Rated power: 2W

●Size: Ф90×H61mm

●Made by Koito Seisakusho Co., Ltd.

●A navigation light installed on the port side of a ship.

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Model: MLL-4AB2

●Type approval number No. 5180

●Light source: LED

●Rated voltage: 12V/24V・Rated power: 2W

●Size: Ф90×H61mm

●Made by Koito Seisakusho Co., Ltd.

●A navigation light installed on the starboard side of a ship.

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Model: MLR-4AB2

●Type approval number No. 5179

●Light source: LED

●Rated voltage: 12V/24V・Rated power: 2W

●Size: Ф90×H61mm

●Made by Koito Seisakusho Co., Ltd.

●It is a navigation light that must be turned on when the vessel is at anchor.

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Model: MLA-4AB2

●Type approval number No. 5178

●Light source: LED

●Rated voltage: 12V/24V・Rated power: 2W

●Size: Ф90×H61mm

●Made by Koito Seisakusho Co., Ltd.

●Outer diameter: 62mm

●Inner diameter: 22mm

●Bolt: Hole diameter 6mm

●Thickness: 1mm

●The special packing is an anti-vibration rubber packing that is installed between the boat light and the installation pedestal, etc., and is recommended to prevent damage to the main unit.

●Special packing for ship lights (manufactured by Ibuki Kogyo Co., Ltd.) that comply with the new standards.

*Product images are for illustrative purposes only and may differ from the actual product.

[Compatible boat lights] Manufactured by Ibuki Kogyo Co., Ltd.
・Third class mast light Product number: 35262 (Manufacturer product number: NLSM-3W)
・Second class sidelight left red Product number: 35263 (Manufacturer product number: NLSG-2R)
・Second class sidelight right green Product number: 35264 (Manufacturer product number: NLSG-2G)
・Second-class dual-color light Product number: 35265 (Manufacturer product number: NLSW-2B)
・Second class stern light Product number: 35266 (Manufacturer product number: NLSS-2W)
・Second class white light Product number: 35267 (Manufacturer product number: NLSA-2W)
・Second class red light Product number: 35266 (Manufacturer product number: NLSA-2R)

●It is a navigation light that is raised when a ship's operation becomes inconvenient. *For ships with a total length of less than 50m

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Advanced technology condensed into a small body!

●Machine-cut heat dissipation plate: A beautiful heat dissipation plate machine-cut from high-strength aluminum and specially treated to efficiently dissipate the heat generated by the LED, achieving an LED unit life of approximately 60,000 hours.

●High light-shielding performance: Based on our unique theory, all parts are placed with high precision to achieve complete light-shielding.

●Wide power supply voltage compatible: The LED unit supports a wide power supply of DC10 to 30V. Built-in stabilization circuit completely absorbs voltage fluctuations.

●Excellent weather resistance and impact resistance: The housing is made of polycarbonate resin. The metal parts are also made of highly weather-resistant materials to ensure high durability and reliability.

●Replaceable LED unit: By replacing the unit at the specified LED time (approximately 60,000 hours), maximum performance can always be achieved.

●Low power consumption: We have succeeded in significantly reducing power consumption by switching to LED. Cut power consumption by up to 90%.

●Installation compatibility: Compatible with conventional Koito products at the same pitch and can be easily replaced.

●GOOD Design GOOD Quality: Winner of the 2013 Good Design Award. made in Japan.

●The size is Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50), the weight is 0.2kg, and the mounting pitch is the same as the old standard Koito Seisakusho type.

*The special packing (product number: 35269) sold separately is a vibration-proof rubber packing that is installed between the boat light and the installation pedestal, etc., and is recommended to be installed to prevent damage to the main unit. The main body has a waterproof structure.

【 specification 】
Manufacturer: Ibuki Kogyo Co., Ltd.
Model: NLSA-2R
Light source: LED
Power supply voltage: DC10V to 30V
power consumption:
LED unit life: about 60000 hours
Protection grade: IP56
Dimensions: Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50, same as conventional Koito products)
Weight: 0.2kg

●It is a navigation light that must be turned on when the vessel is at anchor. *For ships with a total length of less than 50m

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Advanced technology condensed into a small body!

●Machine-cut heat dissipation plate: A beautiful heat dissipation plate machine-cut from high-strength aluminum and specially treated to efficiently dissipate the heat generated by the LED, achieving an LED unit life of approximately 60,000 hours.

●High light-shielding performance: Based on our unique theory, all parts are placed with high precision to achieve complete light-shielding.

●Wide power supply voltage compatible: The LED unit supports a wide power supply of DC10 to 30V. Built-in stabilization circuit completely absorbs voltage fluctuations.

●Excellent weather resistance and impact resistance: The housing is made of polycarbonate resin. The metal parts are also made of highly weather-resistant materials to ensure high durability and reliability.

●Replaceable LED unit: By replacing the unit at the specified LED time (approximately 60,000 hours), maximum performance can always be achieved.

●Low power consumption: We have succeeded in significantly reducing power consumption by switching to LED. Cut power consumption by up to 90%.

●Installation compatibility: Compatible with conventional Koito products at the same pitch and can be easily replaced.

●GOOD Design GOOD Quality: Winner of the 2013 Good Design Award. made in Japan.

●The size is Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50), the weight is 0.2kg, and the mounting pitch is the same as the old standard Koito Seisakusho type.

*The special packing (product number: 35269) sold separately is a vibration-proof rubber packing that is installed between the boat light and the installation pedestal, etc., and is recommended to be installed to prevent damage to the main unit. The main body has a waterproof structure.

【 specification 】
Manufacturer: Ibuki Kogyo Co., Ltd.
Model: NLSA-2W
Light source: LED
Power supply voltage: DC10V to 30V
power consumption:
LED unit life: about 60000 hours
Protection grade: IP56
Dimensions: Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50, same as conventional Koito products)
Weight: 0.2kg

●This is a light that is attached to the stern (stern) part of a ship. *For ships with a total length of less than 50m

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Advanced technology condensed into a small body!

●Machine-cut heat dissipation plate: A beautiful heat dissipation plate machine-cut from high-strength aluminum and specially treated to efficiently dissipate the heat generated by the LED, achieving an LED unit life of approximately 60,000 hours.

●High light-shielding performance: Based on our unique theory, all parts are placed with high precision to achieve complete light-shielding.

●Wide power supply voltage compatible: The LED unit supports a wide power supply of DC10 to 30V. Built-in stabilization circuit completely absorbs voltage fluctuations.

●Excellent weather resistance and impact resistance: The housing is made of polycarbonate resin. The metal parts are also made of highly weather-resistant materials to ensure high durability and reliability.

●Replaceable LED unit: By replacing the unit at the specified LED time (approximately 60,000 hours), maximum performance can always be achieved.

●Low power consumption: We have succeeded in significantly reducing power consumption by switching to LED. Cut power consumption by up to 90%.

●Installation compatibility: Compatible with conventional Koito products at the same pitch and can be easily replaced.

●GOOD Design GOOD Quality: Winner of the 2013 Good Design Award. made in Japan.

●The size is Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50), the weight is 0.2kg, and the mounting pitch is the same as the old standard Koito Seisakusho type.

*The special packing (product number: 35269) sold separately is a vibration-proof rubber packing that is installed between the boat light and the installation pedestal, etc., and is recommended to be installed to prevent damage to the main unit. The main body has a waterproof structure.

【 specification 】
Manufacturer: Ibuki Kogyo Co., Ltd.
Model: NLSS-2W
Light source: LED
Power supply voltage: DC10V to 30V
power consumption:
LED unit life: about 60000 hours
Protection grade: IP56
Dimensions: Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50, same as conventional Koito products)
Weight: 0.2kg

●This is a light that is attached to the bow part of a ship. *For ships with a total length of less than 12m

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Advanced technology condensed into a small body!

●Machine-cut heat dissipation plate: A beautiful heat dissipation plate machine-cut from high-strength aluminum and specially treated to efficiently dissipate the heat generated by the LED, achieving an LED unit life of approximately 60,000 hours.

●High light-shielding performance: Based on our unique theory, all parts are placed with high precision to achieve complete light-shielding.

●Wide power supply voltage compatible: The LED unit supports a wide power supply of DC10 to 30V. Built-in stabilization circuit completely absorbs voltage fluctuations.

●Excellent weather resistance and impact resistance: The housing is made of polycarbonate resin. The metal parts are also made of highly weather-resistant materials to ensure high durability and reliability.

●Replaceable LED unit: By replacing the unit at the specified LED time (approximately 60,000 hours), maximum performance can always be achieved.

●Low power consumption: We have succeeded in significantly reducing power consumption by switching to LED. Cut power consumption by up to 90%.

●Installation compatibility: Compatible with conventional Koito products at the same pitch and can be easily replaced.

●GOOD Design GOOD Quality: Winner of the 2013 Good Design Award. made in Japan.

●The size is Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50), the weight is 0.2kg, and the mounting pitch is the same as the old standard Koito Seisakusho type.

*The special packing (product number: 35269) sold separately is an anti-vibration rubber packing that is installed between the boat light and the installation pedestal, etc., and is recommended to be installed to prevent damage to the main unit. The main body has a waterproof structure.

【 specification 】
Manufacturer: Ibuki Kogyo Co., Ltd.
Model: NLSW-2B
Light source: LED
Power supply voltage: DC10V to 30V
power consumption:
LED unit life: about 60000 hours
Protection grade: IP56
Dimensions: Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50, same as conventional Koito products)
Weight: 0.2kg

●A navigation light installed on the starboard side of a ship. *For ships with a total length of less than 20m

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Advanced technology condensed into a small body!

●Machine-cut heat dissipation plate: A beautiful heat dissipation plate machine-cut from high-strength aluminum and specially treated to efficiently dissipate the heat generated by the LED, achieving an LED unit life of approximately 60,000 hours.

●High light-shielding performance: Based on our unique theory, all parts are placed with high precision to achieve complete light-shielding.

●Wide power supply voltage compatible: The LED unit supports a wide power supply of DC10 to 30V. Built-in stabilization circuit completely absorbs voltage fluctuations.

●Excellent weather resistance and impact resistance: The housing is made of polycarbonate resin. The metal parts are also made of highly weather-resistant materials to ensure high durability and reliability.

●Replaceable LED unit: By replacing the unit at the specified LED time (approximately 60,000 hours), maximum performance can always be achieved.

●Low power consumption: We have succeeded in significantly reducing power consumption by switching to LED. Cut power consumption by up to 90%.

●Installation compatibility: Compatible with conventional Koito products at the same pitch and can be easily replaced.

●GOOD Design GOOD Quality: Winner of the 2013 Good Design Award. made in Japan.

●The size is Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50), the weight is 0.2kg, and the mounting pitch is the same as the old standard Koito Seisakusho type.

*The special packing (product number: 35269) sold separately is a vibration-proof rubber packing that is installed between the boat light and the installation pedestal, etc., and is recommended to be installed to prevent damage to the main unit. The main body has a waterproof structure.

【 specification 】
Manufacturer: Ibuki Kogyo Co., Ltd.
Model: NLSG-2G
Light source: LED
Power supply voltage: DC10V to 30V
power consumption:
LED unit life: about 60000 hours
Protection grade: IP56
Dimensions: Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50, same as conventional Koito products)
Weight: 0.2kg

●A navigation light installed on the port side of a ship. *For ships with a total length of less than 20m

●This is a product that complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Advanced technology condensed into a small body!

●Machine-cut heat dissipation plate: A beautiful heat dissipation plate machine-cut from high-strength aluminum and specially treated to efficiently dissipate the heat generated by the LED, achieving an LED unit life of approximately 60,000 hours.

●High light-shielding performance: Based on our unique theory, all parts are placed with high precision to achieve complete light-shielding.

●Wide power supply voltage compatible: The LED unit supports a wide power supply of DC10 to 30V. Built-in stabilization circuit completely absorbs voltage fluctuations.

●Excellent weather resistance and impact resistance: The housing is made of polycarbonate resin. The metal parts are also made of highly weather-resistant materials to ensure high durability and reliability.

●Replaceable LED unit: By replacing the unit at the specified LED time (approximately 60,000 hours), maximum performance can always be achieved.

●Low power consumption: We have succeeded in significantly reducing power consumption by switching to LED. Cut power consumption by up to 90%.

●Installation compatibility: Compatible with conventional Koito products at the same pitch and can be easily replaced.

●GOOD Design GOOD Quality: Winner of the 2013 Good Design Award. made in Japan.

●The size is Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50), the weight is 0.2kg, and the mounting pitch is the same as the old standard Koito Seisakusho type.

*The special packing (product number: 35269) sold separately is a vibration-proof rubber packing that is installed between the boat light and the installation pedestal, etc., and is recommended to be installed to prevent damage to the main unit. The main body has a waterproof structure.

【 specification 】
Manufacturer: Ibuki Kogyo Co., Ltd.
Model: NLSG-2R
Light source: LED
Power supply voltage: DC10V to 30V
power consumption:
LED unit life: about 60000 hours
Protection grade: IP56
Dimensions: Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50, same as conventional Koito products)
Weight: 0.2kg

●This is a light that is attached to the mast of a ship. *For ships with a total length of less than 20m

●This product complies with the new standards for ship lights installed on new/existing ships after January 1, 2014.

●Advanced technology condensed into a small body!

●Machine-cut heat dissipation plate: A beautiful heat dissipation plate machine-cut from high-strength aluminum and specially treated to efficiently dissipate the heat generated by the LED, achieving an LED unit life of approximately 60,000 hours.

●High light-shielding performance: Based on our unique theory, all parts are placed with high precision to achieve complete light-shielding.

●Wide power supply voltage compatible: The LED unit supports a wide power supply of DC10 to 30V. Built-in stabilization circuit completely absorbs voltage fluctuations.

●Excellent weather resistance and impact resistance: The housing is made of polycarbonate resin. The metal parts are also made of highly weather-resistant materials to ensure high durability and reliability.

●Replaceable LED unit: By replacing the unit at the specified LED time (approximately 60,000 hours), maximum performance can always be achieved.

●Low power consumption: We have succeeded in significantly reducing power consumption by switching to LED. Cut power consumption by up to 90%.

●Installation compatibility: Compatible with conventional Koito products at the same pitch and can be easily replaced.

●GOOD Design GOOD Quality: Winner of the 2013 Good Design Award. made in Japan.

●The size is Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50), the weight is 0.2kg, and the mounting pitch is the same as the old standard Koito Seisakusho type.

*The special packing (product number: 35269) sold separately is a vibration-proof rubber packing that is installed between the boat light and the installation pedestal, etc., and is recommended to be installed to prevent damage to the main unit. The main body has a waterproof structure.

【 specification 】
Manufacturer: Ibuki Kogyo Co., Ltd.
Model: NLSM-3W
Light source: LED
Power supply voltage: DC10V to 30V
power consumption:
LED unit life: about 60000 hours
Protection grade: IP56
Dimensions: Ф68 x H56mm (mounting holes 3-Ф5.5 pitch 50, same as conventional Koito products)
Weight: 0.2kg

■Material (pump): ABS resin
■Size:
Total length: Approximately 53cm (including grip)
Pump body: approx. 44φmm
Hose length: approx. 60cm

●It is a hand pump type bilge pump.
●Since it does not require electricity, it can be used anywhere.
●It is also effective for replacing water in aquariums such as tropical fish.

[Product specifications]
■Size: Length 860 x Width 270mm
■Dial diameter: 350mm
■Terminal installation inner diameter: 19mm

■Applicable: For small batteries
■Can be used up to 800 amperes.

This is an ON/OFF switch attached to the battery terminal (negative side).
You can turn the power on/off by tightening or loosening the green knob that comes with the terminal.

●This is a bilge pump made by ATTWOOD and has the feature of easy maintenance.

●During operation, water always flows around the motor and drains. This keeps the motor constantly cooled and increases its durability.

●This pump is designed to suppress the heat generated by the motor.

●The main body can be fixed by simply pushing it into the base filter, and can be easily removed while pressing the push button. Convenient for cleaning filters in narrow spaces.

●The motor is a cartridge type and can be easily removed by simply twisting the top, making it convenient for cleaning and other maintenance.

●Since the included cord is long (90 cm), there is no need to add parts that are easily corroded by soaking in water, reducing trouble.

●Power source: DC 12v, current: 3.5A, maximum pumping capacity: height 3.3m, lifting capacity: 75L (0m/min)

●Size: Base diameter 84φx Overall height 111x Discharge port diameter 28φmm

*[Note] Be sure to insert a 5A fuse (sold separately) between the pump and the power supply.

●This is a bilge pump made by ATTWOOD and has the feature of easy maintenance.
●This pump is designed to suppress the heat generated by the motor.
●During operation, water always flows around the motor and drains. This keeps the motor constantly cooled and increases its durability.

●The main body can be fixed by simply pushing it into the base filter, and can be easily removed while pressing the push button.
Convenient for cleaning filters in narrow spaces.

●The motor is a cartridge type and can be easily removed by simply twisting the top, making it convenient for cleaning and other maintenance.

●Since the included cord is long (90 cm), there is no need to add parts that are easily corroded by soaking in water, reducing trouble.

●Power source: DC 24v, current: 1.3A, maximum pumping capacity: height 4.2m, lifting capacity: 50L (0m/min)
●Size: Base diameter 84φx Overall height 111x Discharge port diameter 19φmm

【please note】
Be sure to insert a 2A fuse (sold separately) between the pump and the power supply.

●This is a bilge pump made by ATTWOOD and has the feature of easy maintenance.

●During operation, water always flows around the motor and drains. This keeps the motor constantly cooled and increases its durability.

●This pump is designed to suppress the heat generated by the motor.

●The main body can be fixed by simply pushing it into the base filter, and can be easily removed while pressing the push button. Convenient for cleaning filters in narrow spaces.

●The motor is a cartridge type and can be easily removed by simply twisting the top, making it convenient for cleaning and other maintenance.

●Since the included cord is long (90 cm), there is no need to add parts that are easily corroded by soaking in water, reducing trouble.

●Power source: DC 12v, current: 3.0A, maximum pumping capacity: height 4.2m, lifting capacity: 50L (0m/min)

●Size: Base diameter 84φx Overall height 111x Discharge port diameter 19φmm

*[Note] Be sure to insert a 4A fuse (sold separately) between the pump and the power supply.

●Made by ATTWOOD

●The patented X-Air impeller's performance forces air bubbles trapped under the hose and pump out of the piping, preventing seizures caused by the pump running dry.
●This manual bilge pump is the easiest to install and maintain.
●40% more protection against water ingress and electrolysis compared to the previous model TSUNAMI.
●You can use the mount as is with this model even with pumps from other companies.

【specification】
・T500 12V
・Maximum discharge/min: 18.2 liters ・Fuse used: 3Amp
・Hose diameter: 19mm (3/4 inch)
・Recommended boat length: ~18ft

●Stainless steel bracket for fixing navigation lights to pipes, etc.

●Special bracket for navigation lights manufactured by Koito Seisakusho
●For 25mm diameter pipe
●Material: Stainless steel (SUS304)

【please note】
*Bracket only; screws and rubber gaskets to secure the main body and navigation light are not included.
Rubber gaskets can be purchased separately. (Product number: 35269)

[Product specifications]

●Weight: 2.2kg
●Power source: 12V battery direct connection type
●Voltage: DC12V・Current: 10A
●Maximum air flow rate: 180L/min
●Maximum pressure: 1000mb
●Maximum continuous use time: 15 minutes
-Size: L215 x W200 x H130mm
●Accessories:
Power cord with alligator clip, pressure hose, 8 types of hose adapters,
Adapter (for Achilles), storage bag, instruction manual

*With 9 types of nozzle attachments, it can be used on most boats such as Achilles, Joycraft, Zodiac, etc.
*12V battery is required for use.

●When the pressure is low, the blower pump injects pressure at high speed and then automatically switches to the high pressure compressor to increase the required pressure.

●A fan is installed in the high-pressure compressor motor, which is subject to heavy loads.
●After a certain amount of air is filled with a low-pressure blower, the air is filled with a high-pressure compressor to the required pressure.

●The low pressure blower is a turbine type and has the function of filling a large amount of air, while the high pressure compressor is a piston type and has the function of filling a small amount of air at high pressure.

●The pressure sensor automatically switches from the low pressure blower to the high pressure compressor, and automatically stops when the set pressure is reached.

[Important]
*This pump is for inflatable boats, so please avoid using it on inflatable paddle boards. When used on an inflatable paddle board, the high pressure pump needs to run for a long time, which will burn out the motor.

●The float type switch for the bilge pump is now equipped with a guard to prevent malfunction due to dirt, etc.

●When the water level is high, the float floats and conducts, and when the water level drops, it automatically disconnects.

●With lever for operation text

●Compatible with bilge pumps with DC12 to 32V and up to 20Amp.

-Base size 64x133mm, total height 73mm

[Product specifications]
■Body dimensions: 200x85x55mm
■Weight: 795g
■Cord length: 1.8m for both input and output
■Applicable battery: DC 12V lead battery ■Input power source: AC 100V, 50/60hz
■Output: 14.8V, 2.5A
■Pulse output: 22,000 to 28,000Hz
■Equipped with an LED lamp display function that shows the status of the battery during charging and whether recovery and charging are possible.
■Electrical Appliance and Material Safety Act / PSE compliant product ■Accessories: Main unit, alligator clamp, flat round terminal (the alligator clamp and flat round terminal can be used interchangeably depending on the shape of the battery terminal), safety instruction manual, instruction manual Book and warranty

●This is a battery charger that simultaneously removes sulfation, which causes battery deterioration, and charges the battery.

●Refreshes batteries that have deteriorated over many years of use, restores their original performance, and extends the lifespan of batteries that you may have given up on because they have reached the end of their lifespan. (Depending on the condition of the battery that can no longer be charged, it may not be possible to play it.)

●If you continue to use a new battery, it will prevent battery deterioration and extend the battery's original lifespan.

【please note】
Batteries that have been used for a long period of time or that have been discarded as garbage may have significant damage to the electrode plates inside the battery due to deterioration due to charging and discharging cycles. This device restores battery function by removing substances attached to the battery's electrode plates, but cannot restore damage such as falling off or deterioration of the electrode plates themselves. The most effective regeneration target with this device is the sulfation removal effect on relatively new batteries such as agricultural machinery, automobiles, motorcycles, and boats that are not used frequently.
...
In actual use, this device will not automatically stop after transitioning to pulse charging.
There is no need to worry about overcharging, so you can pulse as long as time allows.
Sulfation removal will be completed in approximately 72 hours, so please use this time as a guide even after normal charging.
(Reference: Normal charging takes about 2 to 10 hours, then shifts to pulse charging, and maintenance is complete after 72 hours have passed.)

●Anemometer with built-in electronic compass and display functions for average wind speed, maximum wind speed, and temperature.
●It can be used for a variety of purposes, including marine sports such as yachting, windsurfing, and dinghies, wind speed measurements at outdoor events, golf and track and field events, and air conditioning equipment measurements.

●The main unit is drip-proof, so you can use it in the rain or touch it with wet hands.
●Direction display supports angle display (0 to 360 degrees) and compass point display (north, south, east, and west).
●Wind speed display can be selected from knots, per hour, per second, and miles.

●The storage is a butterfly type, and it can be folded to a size that fits in your pocket.
- Comes with a strap that is convenient for hanging around the neck
●The main body has a screw hole for fixing it to a tripod, so it is possible to take measurements while it is fixed for a long time.

*****specification*****
◆Display type: Built-in electronic compass, wind speed, average wind speed, maximum wind speed
◆Temperature display: 20 to 55 degrees Celsius
◆Accessories: Neck strap
◆Power: Lithium battery CR2032
◆Material: ABS resin
◆External dimensions: Height 142x Width 47x Thickness 20mm
◆Weight: 95g
◆Measurement range: Wind speed 0.1-40m

This is a switch that turns ON/OFF (1 system) power supply from the battery.
Manufactured by BLUE SEA, which boasts a top market share in the United States for RV and boat-related electrical wiring parts and is recommended by many builders.
The MINI Battery Switch is ideal for outboard boats and boats with small diesel engines.

[Product specifications]
■Continuous withstand current: 300Amp
■Momentary withstand current: 1500Amp (2.5 seconds)
■Maximum voltage: 48V
■Size: 68.9x68.9mm
■Terminal stud: 9.5mm

■Installation method: Compatible with mounting methods such as embedded in the wall or stationary.
■Six types of stickers (``ENGINE'', ``ENGINE1'', ``ENGINE2'', ``GENERATOR'', ``HOUSE'', and ``INVERTER'') can be attached to the knob section depending on the purpose.

■■■■■Main features■■■■■
●The connection terminal uses highly conductive copper and is coated with corrosion-resistant tin plating. Achieved reliable wiring.
●The ring sticker and knob that indicate the switch position use luminescent labels. You can operate it without any mistakes even in dark places.
●You can tell that the knob is firmly in each position by a firm "click" response.

This is a switch that turns ON/OFF (1 system) power supply from the battery.
Manufactured by BLUE SEA, which boasts a top market share in the United States for RV and boat-related electrical wiring parts and is recommended by many builders.
The MINI Battery Switch is ideal for outboard boats and boats with small diesel engines.

[Product specifications]
■Continuous withstand current: 300Amp
■Momentary withstand current: 1500Amp (2.5 seconds)
■Maximum voltage: 48V
■Size: 68.9x68.9mm
■Terminal stud: 9.5mm

■Installation method: Compatible with mounting methods such as embedded in the wall or stationary.
■Uses a removable key type that is effective in preventing tampering. Prevents mischief and malfunction.

■■■■■Main features■■■■■
●The connection terminal uses highly conductive copper and is coated with corrosion-resistant tin plating to ensure reliable wiring!
●The ring sticker that indicates the switch position uses a luminescent label. You can operate it without any mistakes even in dark places.
●You can tell that the knob is firmly in each position by a firm "click" response.

■The MINI battery switch is ideal for outboard boats and boats equipped with small diesel engines.
■Battery switch that supplies two systems from two batteries. [Switch position] The following four positions are available.
1. Battery 1 → Connect/cut off the power to the two devices.
2. Battery 2 → Connect/cut off the power to the two devices.
3. Battery 1 + 2 → Connect/cut off the power to the two devices.
4. Shut off all batteries 1+2.

[Product use]
●Continuous withstand current: 300Amp
●Momentary withstand current: 1500Amp (2.5 seconds)
●Maximum voltage: 48V
●Size: 68.9x68.9mm
●Terminal stud: 9.5mm

■Installation method: Compatible with mounting methods such as embedded in the wall or stationary.
■Six types of stickers (``ENGINE'', ``ENGINE1'', ``ENGINE2'', ``GENERATOR'', ``HOUSE'', and ``INVERTER'') can be attached to the knob section depending on the purpose.

■■■■■Main features■■■■■
●Highly conductive copper is used for the connection terminal, and the corrosion-resistant tin plating coating ensures reliable wiring!
●The ring sticker and knob that indicate the switch position use luminescent labels. You can operate it without any mistakes even in dark places.
●You can tell that the knob is firmly in each position by a firm "click" response.

●Not only can it be used to defog glass windows, but it can also be used as a pinpoint heater for your hands and face.

●A louver is attached to the air outlet, allowing you to adjust the direction of the airflow from left to right, and the main unit can be rotated 180 degrees vertically.

●With cigarette lighter plug (cord length: approx. 1m)

●Size: Width approx. 195x Height approx. 100x Depth approx. 70mm

●DC 12V only/output 120W

●Air volume and temperature are about the same level as warm air (weak) from a portable hair dryer.

*[Note] ON/OFF switch is not included. Turn on/off by inserting and removing the plug.

●Anemometer with display function of wind speed, average wind speed, and maximum wind speed.

●It is a simple and easy-to-operate model with only the most frequently used wind speed display for Wind Mate 200 (product number: 24065) and Sky Mate.

●It can be used for a variety of purposes, including marine sports such as yachting, windsurfing, and dinghies, wind speed measurements at outdoor events, golf and track and field events, and air conditioning equipment measurements.

●The main unit is drip-proof, so you can use it in the rain or touch it with wet hands.

●Wind speed display can be selected from knots, per hour, per second, and miles.

●The storage is a butterfly type, and it can be folded to a size that fits in your pocket.

- Comes with a strap that is convenient for hanging around the neck

●The main body has a screw hole for fixing it to a tripod, so you can take measurements while it is fixed for a long time.

*****specification*****
◆Display type: Wind speed, average wind speed, maximum wind speed
◆Temperature display: 20 to 55 degrees Celsius
◆Accessories: Neck strap
◆Power: Lithium battery CR2032
◆Material: ABS resin
◆External dimensions: Height 142x Width 47x Thickness 20mm
◆Weight: 95g
◆Measurement range: Wind speed 0.1-40m

●A battery switch that supplies two systems from two batteries; the switch position is from battery 1 to connect/cut off power to two devices. Battery 2 → Connect/cut off power to two devices. Battery 1+2 → Connect/cut off power to two devices. All batteries 1+2 are cut off. It has 4 ways.

●The e-series is ideal for boats equipped with small to medium-sized diesel engines.

●Manufactured by BLUE SEA, which boasts a top market share in the United States for electrical wiring parts related to RVs and boats, and is recommended by many builders.

●Continuous withstand current: 350Amp

●Momentary withstand current: 1750Amp (2.5 seconds)

●Maximum voltage: 48V

●Size: 97.8×97.8mm

●Terminal stud: 9.5mm

◆◆◆Main features◆◆◆

●The connection terminal uses highly conductive copper and is coated with corrosion-resistant tin plating. Achieved reliable wiring.

●The ring sticker and knob that indicate the switch position use luminescent labels. You can operate it without any mistakes even in dark places.

●You can tell that the knob is firmly in each position by a firm "click" response.

●There are two installation methods. Compatible with wall mounting and stationary mounting methods.

[Product specifications]
■Type: Chrome
■Material: Plastic
■Flange diameter: 48mm
■Maximum thickness when inserting flange: 39mm
■Effective length of hose insertion part: 34mm
■Compatible with hose inner diameter 28.5mm

●This is a through hole for discharging the bilge pump overboard.
●The ABS resin has been treated with 5 layers of surface treatment to create a chrome finish that is scratch resistant and hard to peel off.
●Although the material is plastic, it looks like stainless steel and has a luxurious feel.

[Product specifications]
■Type: Chrome
■Material: Plastic
■Flange diameter: 42mm
■Maximum thickness when inserting flange: 30mm
■Effective length of hose insertion part: 30mm
■Compatible with hose inner diameter 19mm

●This is a through hole for discharging the bilge pump overboard.
●The ABS resin has been treated with 5 layers of surface treatment to create a chrome finish that is scratch resistant and hard to peel off.
●Although the material is plastic, it looks like stainless steel and has a luxurious feel.