Collection: Consumables/Maintenance

[Applicable models] KAWASAKI Kawasaki 900/1100
[Application] Flywheel removal tool

STS 900(2001-2002)
STX 900(1997-2006)
ZXi 900(1995-1997)
STX 1100(1997-1999)
STX-DI 1100(2000-2003)
Ultra130-DI 1100(2001-2004)
ZXi 1100(1996-2003)

[Application] Flywheel removal tool
[Applicable models] KAWASAKI 750 to 800 engine

【Guidance】
If you are using it on a boat equipped with a 440-650 engine, please purchase "003-319".

Kawasaki SS 750 1992-1997
Kawasaki SSXI 750 1993-1997
Kawasaki ST 750 1994-1995
Kawasaki STS 750 1995-1997
Kawasaki STX 750 1998
Kawasaki SX 750 1992-1995
Kawasaki SXi 750 1995-1996
Kawasaki SXI Pro 750 1998-2002
Kawasaki Xi Sport 750 1998-1999
Kawasaki XiR 750 1994
Kawasaki ZXi 750 1995-1997
Kawasaki SX-R 800 2003-2011

[Outlet reason] This is a special price for stock replacement.

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

...

[Compatible models] YAMAHA Yamaha 500 / 650
[Size] Drive shaft: 16mm

WaveJammer 500(1987-1990)
WaveRunner 500(1987-1993)
LX 650(1990-1992)
SuperJet 650(1990-1993)
VXR 650(1991-1995)
WaveRunnerIII 650(1990-1993,1995-1996)

[Adaptation] SEADOO 800/951 engine
●A support tool used when removing flywheel bolts.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1. Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" inside the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

●A tool for crimping bands on fuel hoses, engine boots, etc.

[Information regarding genuine parts]
-------------------------------------------------- -------------------
*This product is a genuine product and cannot be canceled or returned after ordering*
Please be sure to check the following items before ordering.
1.Manufacturer
2.Model name (common name): Please check the ship inspection notebook ("Subject" inside the back cover) or the decal on the hull.
3. Model year: The model year can be determined from the last two digits of the hull identification number (HIN number).
(Example) Hull identification number: KAW12345A607 → 2007 model
The hull identification number (HIN number) is written on a plate affixed to the side or rear of the hull or on the ship inspection log ("Subject" on the inside of the back cover).
-------------------------------------------------- -------------------
●About the displayed price
1.Price and specifications are subject to change without notice.
2. The stated price and actual selling price may differ due to manufacturer part numbers, price changes, etc. We will contact you in that case.
Please note the above.

[Contents] 473ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastics, anodized aluminum, etc.
It is effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Contents] 296ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] Vinyl, rubber products (tires, hoses, rubber, etc.), FRP, plastic, anodized aluminum, etc.
[Effects] Effective in preventing deterioration, waterproofing, stain-proofing, mold-proofing, static electricity prevention, and lubrication.

●Ultraviolet deterioration, sun protection agent 303 Aerospace “AEROSPACE=Aerospace” is
This is a protective agent developed to reduce damage to aircraft caused by ultraviolet rays, and is intended for use in situations where ultraviolet rays are much more powerful than on the ground.

●A strong film is formed on the surface to prevent deterioration such as fading, hardening, and cracking caused by ultraviolet rays.
●Effects last for approximately 3 to 5 weeks after one application. With continued use, you can maintain a beautiful luster for many years.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Contents] 3780ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] For fabrics such as awnings and convertible roof fabrics (sun protection, water repellency, etc.)

●A strong film is formed on the surface of the fabric, providing waterproof effects and preventing deterioration such as fading due to UV rays.
Continuous use will maintain the original color of the fabric over many years and prevent the growth of mold.

●Sun protection, water repellency, stain resistance, and mold prevention agent for fabrics (acrylic, Dacron, olefin, cotton, etc.).
●Awnings, convertible roof fabrics, curtains, outdoor wear, Gore-Tex products,
Valid for tents, umbrellas, backpacks, rucksacks, canvas shoes, etc.

【please note】
Cannot be used on vinyl, plastic, rubber, synthetic leather, or FRP.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Contents] 473ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] For fabrics such as awnings and convertible roof fabrics (sun protection, water repellency, etc.)

●A strong film is formed on the surface of the fabric, providing waterproof effects and preventing deterioration such as fading due to UV rays.
Continuous use will maintain the original color of the fabric over many years and prevent the growth of mold.

●Sun protection, water repellency, stain resistance, and mold prevention agent for fabrics (acrylic, Dacron, olefin, cotton, etc.).
●Awnings, convertible roof fabrics, curtains, outdoor wear, Gore-Tex products,
Valid for tents, umbrellas, backpacks, rucksacks, canvas shoes, etc.

【please note】
Cannot be used on vinyl, plastic, rubber, synthetic leather, or FRP.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Contents] 16L
●Thinner exclusively for ship bottom paint SEAJET 033, 034, and 035.

[Contents] 473ml
[Included] Hardening agent 22cc

●Used to fill in the traces of rounded parts of fiberglass.
●Contains fine glass fibers, so it is strong.
●It is characterized by fast drying, good workability, and strong resistance to water penetration.

[Contents] 946ml
[Included] Hardening agent 22cc
[Applications] Surface filling and leveling agent for wood, aluminum, iron, hulls, decks, etc.

●Can be used as a surface filling and leveling agent for FRP, wood, aluminum and iron at the top and bottom of the water line.
●Dries quickly and can be polished in about 30 minutes.
●Contains very fine spherical glass, making it easy to polish and level the surface.
●Can also be used for hulls, decks, and other parts.

[Contents] 510g
It can remove stubborn stains from aluminum, restore fading caused by oxidation, and polish at the same time.

●Removes rust, oxidation products, and corrosion products from metal surfaces such as stainless steel, brass, copper, chrome plating, and aluminum, restoring their shine.

●Capacity: 510g

[Contents] 3790ml
[Application] For stubborn stains (contains a compound with excellent cutting properties and polishing wax)

A compound-containing wax that is ideal for removing stubborn stains.
Contains a compound with excellent cutting properties and polishing wax to remove dirt, stains, rust, and faded areas on gel coated and painted surfaces.
Work can be done more efficiently when used in conjunction with a fine pad.

[Inner capacity] 473m
[Application] For stubborn stains (contains a compound with excellent cutting properties and polishing wax)

A compound-containing wax that is ideal for removing stubborn stains.
Contains a compound with excellent cutting properties and polishing wax to remove dirt, stains, rust, and faded areas on gel coated and painted surfaces.
Work can be done more efficiently when used in conjunction with a fine pad.

[Contents] 3790ml
[How to use] Depending on the dirt, use the undiluted solution or dilute it with water to a ratio of about 5:1.
[Application] For removing general to light stains (contains a compound with low machinability and polishing wax)
*Please use it on areas that cannot be removed with boat soap.

A compound-containing wax that is ideal for removing general to light stains.
Contains a low-cutting compound and polishing wax that removes dirt, stains, rust, and fading from gelcoat and painted surfaces.
Work can be done more efficiently when used in conjunction with a fine pad.

[Contents] 473ml
[How to use] Depending on the dirt, use the undiluted solution or dilute it with water to a ratio of about 5:1.
[Application] For removing general to light stains (contains a compound with low machinability and polishing wax)
*Please use it on areas that cannot be removed with boat soap.

A compound-containing wax that is ideal for removing general to light stains.
Contains a low-cutting compound and polishing wax that removes dirt, stains, rust, and fading from gelcoat and painted surfaces.
Work can be done more efficiently when used in conjunction with a fine pad.

[Contents] 2L
■Estimated peeling process: Approximately 5 square meters for 2L

【how to use】
After washing with water, dry the peeled surface and apply 441 as thickly as possible.
After leaving it for 15 to 20 minutes, use a scaler made of material (such as plastic) that will not damage the gel coat surface.
Remove any floating paint with a remover and finish by wiping this product completely with thinner, etc.

●A stripping agent for cleaning the base of the ship's bottom.
●A neutral type with little irritating odor, it is made of ingredients that are friendly to the human body and the environment, and will not damage the gel coated surface of FRP.

【please note】
When working, avoid closed rooms and do so in a well-ventilated area.

[Contents] 2L
[How to use] For removing red rust, blue rust on the hull, removing stains from the wood of the deck, and cleaning light oily substances.

It does not cause corrosion damage to painted surfaces or metal surfaces of the hull, and the luster of the hull does not disappear.

▼How to use▼
Wet the area to be cleaned with water before use.
For normal use, dilute it 3 times and adjust the concentration depending on the degree of dirt.
Using rubber gloves, thoroughly soak a brush, sponge, or cloth in detergent and scrub depending on the degree of dirt.
Be sure to rinse thoroughly with plenty of tap water within 2 minutes to ensure that no Hytrail ingredients remain.
Wipe off moisture with a dry cloth.

*Please try it in an inconspicuous place before use.
*Do not leave it on for more than 2 minutes as it may change color.

Notes
・Never use a spray bottle.
・Do not use on glass surfaces such as automobiles or aluminum parts of vehicles.
・Please do not use the product under the blazing sun or when the product is hot, as stains and uneven color may occur and will be difficult to wipe off.
・Please do not use coatings (mirror finishing, etc.) or painted areas as they will peel off.

A coating agent containing fluorine-modified silicone.
For protecting and polishing gel coat surfaces of boats and PWCs!
For reproducing black color and polishing resin moldings and gunwales!

■Construction guideline
Aerosol 420ml, application area: approximately 3 to 5.24 feet 2 bottles for ships, 1 bottle for PWC
■Construction method
1. Remove dirt and debris from the area to be applied with a cleaning agent and dry.
2.Apply Marine Glass Coat and spread it over the entire surface using a cloth such as a microfiber cloth.
3. Let it dry at room temperature for about 3 to 8 hours.

●Marine Glass Coat is a coating agent for ship hulls that contains fluorine-modified silicone.
●By forming a glass-like film on the gel coat or painted surface, it creates a glossy luster, and
The water repellent effect reduces the adhesion of dirt and rust, making subsequent cleaning easier◎
●It cures easily at room temperature, so you can easily apply the coating yourself.
It can be used for FRP, so it can be used not only for boat hulls but also for camper shells etc.

●Nuperakurin PLUS is a set of antifouling paint for propellers that does not contain chromate compounds and is friendly to people and the environment.

●An epoxy resin primer that has excellent adhesion to the propeller surface that rotates at high speed and forms a strong coating, and a newly formulated silicone resin antifouling paint that exhibits excellent antifouling power even during mooring periods. Prevents marine organisms from adhering to the shaft.

●Note: An electric disc sander is required for construction.
Paper discs #80 to 240, nylon discs, etc. can be used, expanding the scope of work.

[Coating amount] Approximately 0.3 square meters (approximately 25 cm diameter propeller)

【set content】
■Nuperacrine PLUS Primer: Main agent ×1530g
■Nuperakurin PLUS Primer: Hardening agent ×270g
■Nuperacrine PLUS Primer: Adhesion enhancer ×90g
■Nuperakurin PLUS finish: 1000g

【how to use】
1.Remove marine organisms and oil from the propeller.
2.Remove the old paint film and polish the propeller surface using an electric disc sander.
3. Wipe with thinner. (Sea Jet Thinner A, Sea Jet Thinner D, etc.)
4. Apply two coats of Nuperacrine PLUS Primer. (Please complete 2 coats within 90 minutes)
5.After the primer dries, apply Nuperacrine PLUS finish. (Recommended 2 coats or thicker coat)
6. After drying thoroughly, lower the rack. (Over 8 hours at a temperature of 20 degrees)
*For details, please refer to the installation instructions included with the product and the Chugoku Paint Co., Ltd. website.

●Nuperakurin PLUS is a set of antifouling paint for propellers that does not contain chromic acid compounds and is friendly to people and the environment.

●An epoxy resin primer that has excellent adhesion to the propeller surface that rotates at high speed and forms a strong coating, and a newly formulated silicone resin antifouling paint that exhibits excellent antifouling power even during mooring periods. Prevents marine organisms from adhering to the shaft.

●Note: An electric disc sander is required for construction.
Paper discs #80 to 240, nylon discs, etc. can be used, expanding the scope of work.

[Coating amount] Approximately 0.3 square meters (approximately 25 cm diameter propeller)

【set content】
■Nuperacrine PLUS Primer: Main agent ×255g
■Nuperacrine PLUS Primer: Hardening agent x 45g
■Nuperacrine PLUS Primer: Adhesion enhancer ×15g
■Nuperakurin PLUS finish: 160g
■Brush: 2

【how to use】
1.Remove marine organisms and oil from the propeller.
2.Remove the old paint film and polish the propeller surface using an electric disc sander.
3. Wipe with thinner. (Sea Jet Thinner A, Sea Jet Thinner D, etc.)
4. Apply two coats of Nuperacrine PLUS Primer. (Please complete 2 coats within 90 minutes)
5.After the primer dries, apply Nuperacrine PLUS finish. (Recommended 2 coats or thicker coat)
6. After drying thoroughly, lower the rack. (Over 8 hours at a temperature of 20 degrees)
*For details, please refer to the installation instructions included with the product and the Chugoku Paint Co., Ltd. website.

●Nuperakurin PLUS is a set of antifouling paint for propellers that does not contain chromic acid compounds and is friendly to people and the environment.

●An epoxy resin primer that has excellent adhesion to the propeller surface that rotates at high speed and forms a strong coating, and a newly formulated silicone resin antifouling paint that exhibits excellent antifouling power even during mooring periods. Prevents marine organisms from adhering to the shaft.

●Note: An electric disc sander is required for construction.
Paper discs #80 to 240, nylon discs, etc. can be used, expanding the scope of work.

[Coating amount] Approximately 0.3 square meters (approximately 25 cm diameter propeller)

【set content】
■Nuperacrine PLUS Primer: Main agent x 119g
■Nuperacrine PLUS Primer: Hardening agent x 21g
■Nuperacrine PLUS Primer: Adhesion enhancer ×7g
■Nuperakurin PLUS finish: 80g
■Brush: 1

【how to use】
1.Remove marine organisms and oil from the propeller.
2.Remove the old paint film and polish the propeller surface using an electric disc sander.
3. Wipe with thinner. (Sea Jet Thinner A, Sea Jet Thinner D, etc.)
4. Apply two coats of Nuperacrine PLUS Primer. (Please complete 2 coats within 90 minutes)
5.After the primer dries, apply Nuperacrine PLUS finish. (Recommended 2 coats or thicker coat)
6. After drying thoroughly, lower the rack. (Over 8 hours at a temperature of 20 degrees)
*For details, please refer to the installation instructions included with the product and the Chugoku Paint Co., Ltd. website.

●Size: 480mm

●0.50L/1 stroke

●With hose

●Bilge can be discharged by moving the lever up and down with a manual bilge pump. It is very convenient to have one on the ship.

●Since it does not require electricity, it can be used anywhere.

●It is also effective for replacing water in aquariums such as tropical fish.

■Material (pump): ABS resin
■Size:
Total length: Approximately 53cm (including grip)
Pump body: approx. 44φmm
Hose length: approx. 60cm

●It is a hand pump type bilge pump.
●Since it does not require electricity, it can be used anywhere.
●It is also effective for replacing water in aquariums such as tropical fish.

A concentrated detergent that cleans stubborn oil stains in a short time.
●Liquid: alkaline,
●Ingredients: Nonionic surfactant

[Application] For FRP & stubborn oil stains

[Contents] 750ml
【how to use】
1. Spray directly onto the surface you want to clean, leave it for a few seconds, then wipe it off with a damp sponge or cloth.
2. After use, immediately rinse with water or wipe thoroughly with water.
*If the dirt is not too bad, dilute it 10 times with water.
*Estimated usage amount: Approximately 5 sprays per 1 square meter

【please note】
Cannot be used on transparent plastics in general, polycarbonate, and items that can be soaked with water.

This item is currently not scheduled to be restocked.

[Contents] 3780ml
[Application] For removing oxidation, fine scratches, rust, etc. on gel coat surfaces.

A paste-like compound that removes oxidation, small scratches, rust, exhaust dirt, etc. that appear on the surface of gel coat.
Recommended for preparing the groundwork at a relatively early stage.
High machinability allows for efficient work.

●An earthquake-resistant mat with strong adhesive strength that helps prevent equipment from tipping over, preventing slipping, and fixing equipment on board.
●Minimizes damage inside the ship and ensures the safety of the crew.
●This mat can be used on board ships, which are harsh environments such as violent shaking and high temperatures, and is also effective in general homes and offices.
●Use it to prevent large furniture such as televisions and computer refrigerators from falling over, as well as small items such as vases and works of art.

●When used as a single piece, it is compatible with items weighing up to 100 kg.
*It can be easily separated into small pieces with scissors, etc., and if all of them are attached to the bottom of the device, the same load capacity can be obtained.

●Size: width 100x width 100x thickness 5mm
●Contents: 1 piece
●Material: Urethane gel
●Color: Clear
●Applicable temperature: -20℃~75℃

●An earthquake-resistant mat with strong adhesive strength that helps prevent equipment from tipping over, preventing slipping, and fixing equipment on board.
●Minimizes damage inside the ship and ensures the safety of the crew.
●This mat can be used on board ships, which are harsh environments such as violent shaking and high temperatures, and is also effective in general homes and offices.
●Use it to prevent large furniture such as televisions and computer refrigerators from falling over, as well as small items such as vases and works of art.

●When using 6 sheets, it is compatible with objects weighing up to 75 kg.

●Size: width 30x width 40x thickness 5mm
●Contents: 6 pieces
●Material: Urethane gel
●Color: Clear
●Applicable temperature: -20℃~75℃

●An earthquake-resistant mat with strong adhesive strength that helps prevent equipment from tipping over, preventing slipping, and fixing equipment on board.
●Minimizes damage inside the ship and ensures the safety of the crew.

●This mat can be used on board ships, which are harsh environments such as violent shaking and high temperatures, and is also effective in general homes and offices.
●Use this product to prevent large furniture such as TVs, computers, and refrigerators from falling over, as well as small items such as vases and works of art.

●When using 4 pieces, it is the perfect size for securing electrical appliances and accessories such as microwave ovens and rice cookers.
●Suitable for items weighing up to 40kg. (When using 4 sheets)

●Size: 30×30mm
●Contents: 4 pieces
●Material: Urethane gel
●Color: Clear
●Applicable temperature: -20℃~75℃

[Contents] 946ml
●Brightener (product number: 32092): Brightener adds moisture and shine to wood. If there is dirt on the work surface, remove the dirt with a cheek cleaner, then rub in this agent with a sponge or brush. Leave it on for about 5 minutes, then rinse it off with water and you're done.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

[Contents] 946ml

●Cleaner (product number: 32251): The cleaner removes dirt such as oil from wood, fish blood, and dullness. After applying this agent, please rub it lightly with a brush. Leave it on for about 15 minutes and then wash it off with water.

Cleaners, brighteners, and gel coats will not affect the gel coat or painted surface.

[Contents] 3.79L

●A biodegradable and environmentally friendly bilge cleaner. Decomposes oil, grease, gasoline, diesel oil and sludge. The recommended usage is 0.95L for a 25-foot boat.

●If the bilge is dry, pour fresh water into the bilge, let it sit for about an hour, then run the boat before draining. Cleans and refreshes the smell of bilges such as engine rooms.

[Contents] 0.95L

●A biodegradable and environmentally friendly bilge cleaner. Decomposes oil, grease, gasoline, diesel oil and sludge. The recommended usage is 0.95L for a 25-foot boat.

●If the bilge is dry, pour fresh water into the bilge, let it sit for about an hour, then run the boat before draining. Cleans and refreshes the smell of bilges such as engine rooms.

[Contents] 473ml

●The concentrate of this product contains 100% of the world's purest oils, including tung oil, which restores and protects the surface of teak to its natural finish color. It penetrates deeply and surrounds the wood fibers, preventing moisture and other components from entering that would damage the wood of teak.

[Contents] 946ml
[How to use] Spray directly onto the object or soak it into a cloth.
[Applications] For fabrics such as awnings and convertible roof fabrics (sun protection, water repellency, etc.)

●A strong film is formed on the surface of the fabric, providing waterproof effects and preventing deterioration such as fading due to UV rays.
Continuous use will maintain the original color of the fabric over many years and prevent the growth of mold.

●Sun protection, water repellency, stain resistance, and mold prevention agent for fabrics (acrylic, Dacron, olefin, cotton, etc.).
●Awnings, convertible roof fabrics, curtains, outdoor wear, Gore-Tex products,
Valid for tents, umbrellas, backpacks, rucksacks, canvas shoes, etc.

【please note】
Cannot be used on vinyl, plastic, rubber, synthetic leather, or FRP.

AERO SPACE PROTECTANT Manufactured by Aerospace Protectant

[Product specifications]

●Weight: 2.2kg
●Power source: 12V battery direct connection type
●Voltage: DC12V・Current: 10A
●Maximum air flow rate: 180L/min
●Maximum pressure: 1000mb
●Maximum continuous use time: 15 minutes
-Size: L215 x W200 x H130mm
●Accessories:
Power cord with alligator clip, pressure hose, 8 types of hose adapters,
Adapter (for Achilles), storage bag, instruction manual

*With 9 types of nozzle attachments, it can be used on most boats such as Achilles, Joycraft, Zodiac, etc.
*12V battery is required for use.

●When the pressure is low, the blower pump injects pressure at high speed and then automatically switches to the high pressure compressor to increase the required pressure.

●A fan is installed in the high-pressure compressor motor, which is subject to heavy loads.
●After a certain amount of air is filled with a low-pressure blower, the air is filled with a high-pressure compressor to the required pressure.

●The low pressure blower is a turbine type and has the function of filling a large amount of air, while the high pressure compressor is a piston type and has the function of filling a small amount of air at high pressure.

●The pressure sensor automatically switches from the low pressure blower to the high pressure compressor, and automatically stops when the set pressure is reached.

[Important]
*This pump is for inflatable boats, so please avoid using it on inflatable paddle boards. When used on an inflatable paddle board, the high pressure pump needs to run for a long time, which will burn out the motor.

[Application] For stubborn stains such as black spots on exhaust ports.
[Applications] FRP, metal, painted surfaces
[How to use] Wait for a while after spraying, then rinse with a hose.

Removes especially stubborn dirt that floats to the waterline during navigation.
Can be used on FRP, metal, and painted surfaces. It is also effective for removing black stains from exhaust ports.
●Capacity: 650ml

[Application] Removal of rust, stains, and oil stains
[Applications] FRP, metal, painted surfaces
[Type] Environmentally friendly biodegradable cleaner

Removes rust, stains, and oil stains without scrubbing.
For particularly dirty areas, please use Strake Cleaner (Part No. 23624).

●Capacity: 946ml

[Contents] 1.9L
【how to use】
1. Remove dirt such as mud with plenty of water.
2. Mix boat soap and water to remove large stains such as oil soot.
*Although it is used diluted with water, please use the undiluted solution on heavily soiled areas.

[Application] For FRP parts of boats and campers.

Meguiar's Boat Soap has a rich and fine lather.
It removes bubbles easily and does not leave a white residue.
Because it is a gel-like liquid, it does not drip easily and has good work efficiency, and can be cleaned with fine foam.

●Includes importer's Japanese instruction manual

[Outlet reason] Special price for stock replacement

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

[Compatible] Ring thickness up to 1.2 to 6.3 mm regardless of cylinder bore
[Application] When disassembling or assembling an engine, you can smoothly attach and detach piston rings that are easy to break.

●A convenient tool that can be used for everything from cars to trucks.
●Equipped with a stopper that allows you to work without expanding the piston ring more than necessary.

[Outlet reason] Special price for stock replacement.

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

POWERBUILT Ratchet Box Handle 12mm

[Outlet reason] Special price for stock replacement.
★Roughness and rust on the surface, and peeling of the logo on the grip (see photo)

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*Product specifications and compatibility are only listed.

POWERBUILT Ratchet Box Handle 10mm

[Outlet reason] Special price for stock replacement.

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

[Size] Total length 15cm
[Application] Stops leaks by pinching the hose.
[Support] Hose diameter up to 13mm

The lock ring attached to the middle of the clamp moves freely and locks the hose in the collapsed position.
To release, simply squeeze the lock ring again and return the lock ring to the position where the lever is raised.