Collection: All items

■Can be used in 3 stages: forward rotation lock, reverse rotation lock, and free rotation.

■The handle is thick and easy to grip.

■Gear ratio: 4:1

■Material: Steel plating

■Maximum towing load: 900kg/ 2000LBS

*Body/handle only.

*Winch strap is not included.

●By extending the length from the hook to the ratchet more than usual, the ratchet part will not interfere with the hull or sponson.

●S-type hooks are all made of stainless steel and will not only keep out salt water but also rust.

●The "UNLIMITED" logo printed on the belt is an accent.

■Belt length 4.5m x width 25mm
■Belt length from hook to ratchet: Approximately 50cm

[Compatible models] SEA-DOO SPARK

[Quantity] 25 pieces
[Material] Stainless steel
[Size] 4mm

The genuine washer (291003880) used on the body of SEA-DOO SPARK is made of plastic and may break depending on the number of times it is used, so we recommend replacing it with this kit during maintenance.

Two pieces of this kit are required to replace the washer on a SPARK 1 boat.
★Total number used: Front body x 8, rear body x 16, center body x 21 (2) = 47 in total

[Compatible models] YAMAHA Superjet (2021)

New wing design dramatically increases hookups.
Improves top speed, turning and handling in rough water.
Perfect for racing purposes as well as free riding.
Significantly reduces cavitation.

The water intake port at the back of the gate (UNLIMITED logo) is designed to be raised higher than usual (4mm higher) to allow more water to be sent to the pump.

[Applicable models] KAWASAKI ULTRA300/310 series

●Remove and use the muffler filter inside the normal muffler.
● Filter maintenance can be omitted by removing the filter.

【Manufacturer】SUBARU
【Car model】Forester
【Compatible model】5BA-SK9, 5AA-SKE 4BA-SK5
【Year】H30.7～R3.7
【Compatible grades】5BA-SK9: Touring, Premium, X-BREAK 5AA-SKE: Advance 4BA-SK5: SPORT 【Notes】Detachment of tow hook, heat shield (requires modification)

【Type】STD
STD: Steel, LTD: Stainless steel, LTD II: Stainless steel

【Towing capacity】C
【Shape】F-1
【Processing】D-3
【Drilling】-
【Installation time】 2.5 hours

【Regarding the product】
●All hitch members are made-to-order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on car model and material.
●Depending on the material and type, some products are made-to-order, so cancellations and changes after ordering are not possible. Please be aware of this.
●For some car models, we may ask you to FAX your vehicle inspection certificate for compatibility confirmation.

【Disclaimer】
・Please confirm compatibility before placing an order. We kindly ask you to refrain from confirming compatibility after placing an order.
・The photos are examples, and the installation method and shape may differ depending on the car model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Regarding shipping】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct shipping from the manufacturer, so cash on delivery is not possible.

※Cannot be shipped to a freight company's sales office for pickup
※Delivery to corporations/companies, and some private residences only
The following cases cannot be accepted:
1. A room in an apartment building
2. Religious corporations, shrines, temples
3. Cases where it cannot be determined to be a corporate building
4. Cases where it is determined that there is a risk of a delivery truck intruding
5. Other special circumstances where delivery is deemed to be hindered

【About delivery】
Shipping costs to Okinawa Prefecture will be estimated separately each time.

【Manufacturer】MAZDA
【Model】MPV
【Compatible Vehicle Model】LY3P
【Model Year】H18.2～H20.1
【Compatible Grades】23C-Sporty Package, 23T, 23C 【Notes】2WD/4WD compatible

【Type】STD
STD:Steel, LTD:Stainless Steel, LTD II:Stainless Steel

【Towing Capacity】C
【Shape】F-1
【Processing】D-1・3
【Drilling】2
【Installation Time】 2 hours

【Regarding the product】
●All hitch receivers are made to order. (Estimated delivery time is approximately 10 days to 2 weeks*) *Varies depending on vehicle model and material.
●Depending on the material and type, some products are made to order and cannot be canceled or changed after ordering. Thank you for your understanding.
●For some vehicle models, we may ask you to FAX your vehicle inspection certificate to confirm compatibility.

【Disclaimer】
・Please confirm compatibility before placing an order. Please refrain from confirming compatibility after placing an order.
・The photos are examples, and the installation method and shape may differ depending on the vehicle model. Also, processing may be required on the towing vehicle side, so please contact us for details.
・As this is a made-to-order product, returns and exchanges are not possible.

【Delivery Information】
・Due to the shape of the product, it cannot be combined with other products.
・Basically, direct delivery from the manufacturer, so cash on delivery is not possible.

※Cannot be shipped to a freight company's sales office for pickup
※Delivery limited to corporations/companies or some private residences
In the following cases, delivery cannot be accepted.
1. A room in a multi-unit dwelling
2. Religious corporations, Shinto shrines, Buddhist temples
3. Cases where it cannot be determined to be a corporate building
4. Cases where the entry of a delivery truck is deemed dangerous
5. Other special circumstances where delivery is deemed problematic

【About Delivery】
Shipping costs for delivery to Okinawa Prefecture will be estimated separately.

■Material: Steel plating

[Caution] The plating may peel off or be scratched during transportation from overseas.
Please understand this before purchasing.

■Details
[Product number: Ball diameter / Housing / Maximum towing weight / Mounting hole spacing]
TC-01: 2 inches / 50.0mm compatible / 1,588kg / approx. 77mm

SOREX genuine parts combination lamp
A lamp that is standard equipment on SOREX trailers since 2011.

●Product size: Ф118×50mm
●Mounting pitch: 70mm
●Common shape for left and right (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Do not submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

●SOREX NF-1 back lamp. (1 piece)

●Size 100x40x45mm

Eliminates the inconvenience when moving a trailer, such as not having a place to hold it, or being in a low position and not being able to use force even if you attach a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

It can be installed if the shape of the bow tower is 45 x 75 and there is an installation space of about 20 cm at the top.
Can also be installed on SOREX bow stop kit [Product number: ST-090-02, ST-088-01] *SOREX trailer MB cannot be installed because the bow stop is special.

■Included: 2 sets of mounting bolts (size: Φ10x47x100mm) and nuts

Product name: Wiring kit
Product number: SRX-006

This is a wiring kit for lights on the tow vehicle side.

[Kit contents]
■Wiring socket ■Wiring ■Connection tap x 6 pieces

●SEA-DOO Pump Repair Kit

The SEA-DOO genuine part numbers (OEM) are as follows:
① 267000900 Angle Bearing
② 293300086 O-rings ×2
③ 271002071 Seals ×2
④ 293370038 BRP Genuine Circlip
⑤ 293200089 Oil Seal
⑥ 293300090 O-ring

[Applicable models] SEA-DOO 4-stroke

●Genuine part number (OEM): 278003828 (old part number: 278002822)

●SGS 30Amp relay●This is an inexpensive aftermarket repair part with performance equivalent to the original part.

●Set of undiluted solution 3784ml and mixer

[Applications] Preventing salt damage such as corrosion and rust due to the influence of salt. For flushing marine engines, cleaning the hull, drive, car, and trailer undercarriage.

●Acts directly on salt to remove salt buildup, corrosion, dirt, etc., protecting tools from salt damage.
●Contains no harmful substances and is 100% biodegradable, making it environmentally friendly and safe to use.

●Not only marine products but also various items used in coastal areas,
They suffer from problems such as corrosion and rust due to the effects of salt.
Salt Away is a strong ally for those who have problems with salt damage!

●Salt Away (salt corrosion inhibitor) that can be effectively washed with water.

[Image 2] Example of use on SEA-D00 RXT-X 260 RS [Image 3] Example of use on KAWASAKI ULTRA300X

*Put Salt Away in the mixer and connect the water hose to use as shown in the usage example.
*This product only comes in undiluted solution, so please purchase the mixer separately.

Applicable models:
●YAMAHA FX SVHO (19-)

●Far exceeds the intake efficiency of the standard filter.

●The power filter provides a stable supply of cool air to supercharged engines, providing significantly improved acceleration and RPM.

【Compatible Models】
KAWASAKI STX-15F / 15S / 12F

●Increases air intake, supplying a larger volume of air to the engine,
improving low to mid-range acceleration and increasing top speed.

●Directly mounts to the throttle body to enhance intake efficiency.

■Includes water-repellent pre-filter
■Accessories: Small breather filters × 2

●YAMAHA Genuine Parts

●Waterproof Battery Switch Set for MJ FX, VX, EX Series

●Set Contents: Battery switch body, power cable, screws, and other necessary mounting parts

【Specifications】
Rated voltage: DC12V Rated current: Max 60A

●This is a waterproof battery switch set that allows you to easily turn the marine jet's battery power on/off.

●It saves you the trouble of disconnecting the cable from the battery terminal when the marine jet is not in use.

●It includes all the necessary materials for installation, such as the switch, power cable, and screws.

【Please check before ordering】
This product is a **manufacturer-ordered product (genuine parts)**.
Once an order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to order contents due to customer convenience are generally not accepted.
Also, delivery may take time depending on the manufacturer's stock status. We will notify you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this in advance.

[Compatible models]
SEA-DOO 4-stroke (~'15)
*Not compatible with SPARK

■This is a ready-to-use battery. After injecting the electrolyte, it can be used after resting for about 30 minutes.
■For low temperatures or items that have not been used for a long time, please use after charging for 1-2 hours.
*You can use it for as long as possible by always maintaining it so that it does not fall below 12.3V.

■Calcium battery fluid refill type
■Size: W170 x H130 x D195mm

■Voltage: 12V ■10-hour rate capacity: 30Ah ■Charging current: 3A
■Weight: 9.31KG

■Country of origin: China

[Features]
●Excellent self-discharge performance, long life, and starting performance
By gelling the electrolyte, we were able to improve the basic performance important for batteries.
.
●No liquid leakage even if it falls over! It's a sealed gel battery, so even if it falls over,
there's no need to worry about liquid leakage. ●Maintenance-free
Since the product is sealed from the time of purchase, there's no need to inject/refill battery fluid, saving you time. However,
be careful with the charging current.

*Initial charging time: 1-2 hours
*Charging may be necessary for low temperatures in winter, or if the engine has difficulty starting after a period of non-use since manufacturing.

[Disclaimer]
*Cannot be shipped to Okinawa Prefecture and isolated islands in each prefecture.
*Due to the nature of the product, some items cannot be shipped together.

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.

■Application: Winch strap
■Length: 4.5m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N410-60S large hook 6.0m,
*Product number: N420-45S small hook 4.5m,
*Product number: N420-60S small hook 6.0m is also available.

This is an original square-shaped clear bag from JSPTOKAI.

With a large capacity of 56L, you can store up to four life jackets at once.
The U-shaped zipper opens wide at the top, making it easy to neatly store a wetsuit, life jacket, boots, gloves and other gear.
The combination with mesh material at the bottom allows water to drain easily!

With this bag, you can instantly solve the hassle of carrying and storing your belongings!

■Size: 50x45x25cm
■Fabric: Clear PVC, black mesh

【Note】
The clear bag is sold separately. Life jackets and other items are not included.

■Compatible with: JL81400 Beach tote tires only
(We do not know whether it is compatible with other products or products from other manufacturers.)

■Sales unit: 1 piece
■Material: Nylon
*Nylon pin bearing only. Other parts are not included.

■Towing vehicle side 7-pin type wiring connector kit for lights

■The wiring is a little longer than the conventional kit, and a wiring cover is included.

[Kit contents]
Wiring socket, 2m wiring, 7 connection taps, wiring cover

[Adaptation] KAWASAKI 750/800
[Quantity] 1 piece

Compared to the genuine base gasket, the surface has been specially processed to improve sealing performance.
In addition, the special processing on the gasket surface allows it to be used several times.
Compared to the paper type of the genuine product, it is made of metal, so there is no chance of tearing during maintenance.
This is a high-performance gasket that is more economical than genuine products.

[Adaptation]
External manifold (compatible with R&D, FACTORY PIPE, ETC, etc.) and KAWASAKI 650

●This gasket is more economical than other companies' products and genuine products.

■Compatible with: KAWASAKI Kawasaki
ULTRA 250/260/300/310 series

■Material: Stainless steel
■Application: Remove exhaust manifold

Existing wrenches interfere with the hull, making them difficult to work with and prevent bolts from turning smoothly.
A dedicated angle extension wrench to solve these problems.

"Mirror finish" with a focus on strength and visuals,
This is a product that will shine even in your tool box.

When attached to the bank of a trailer, it can be easily slid to load and unload jets and boats.

■Material: Polyethylene ■Total length: 13300mm
■Full width: 29mm

■Set contents Blue rail 133cm x 4 pieces

[Notes about the product]
●As this is an overseas manufactured product, the color and texture may differ depending on the time of arrival and the individual product.
●Please note that small scratches occur during the manufacturing process and are not eligible for return or exchange.

Same product as jet launcher standard equipment.

■10Ф
■Made of stainless steel
jet launcher repair parts

[Compatible models] SEA-DOO
SPARK
GTI SE 90
(*Equivalent to genuine product number 420956123)

This is an aftermarket oil filter with excellent cost performance at a lower price than the genuine product.

[About oil filter]
Inside the engine, there is sludge generated from impurities contained in fuel and oil,
Metal particles are generated due to friction between the cylinder and piston rings.
As the engine oil washes away the generated
The engine can continue to work normally.

However, repeated use over a long period of time causes dirt and deterioration in the engine oil, so
It cleans through a filter and prevents dirt from re-attaching and deteriorating.
The role of an oil filter is to maintain the life cycle of oil for a long period of time.

[PWC compatible models]

◆For YAMAHA marine jets
FX140 FX140 Cruiser (2002-2006)
FX160 FX160 Cruiser (2002-2006)
FXHO (2006-2008)
VX (2005-2015)
VX110SP, VX110DX (2005-2015)
VX Cruiser (2005-2015)
EX (2017-)

●YAMAHA genuine part number: 94709-00409

*We also sell cases (10 bottles) with free shipping.
*The image is for illustrative purposes only.

This 46-liter soft cooler bag is perfect for camping and other outdoor activities, and can even be secured to jet skis and SUPs. It also features rod holders for a fun fishing experience.

Inner size: 50 x 27 x 34cm - 46 liters
Inner material: 600D polyester laminate with PVC on the bottom for enhanced grip
20mm thick sponge foam insulation
Heat-sealed PVC film interior
Multi-connection system
Two rod holders with bungee locks
Durable inner shell


Jet ski, marine jet, personal watercraft, surfing, board, wakeboard, wakesurfing, kiteboard, flyboard, diving, SUP, windsurfing, kayak, canoe, snorkeling, fishing, marine sports

This is a genuine Yamaha hose adapter.

【Please read before ordering】
This product is a **manufacturer-ordered item (genuine part)**.
Once your order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to your order due to customer's convenience are generally not accepted.
In addition, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery date as soon as it is confirmed.
Thank you for your understanding and cooperation.

≪Set contents≫
Anchor body, rope with float and 2 hooks (rope length approx. 6m), original bag

【anchor】
Suitable for small boats, bass boats, yachts, etc.
The surface is galvanized (dissolved galvanized) to protect the iron from rust, making it highly durable and weather resistant.
The claws can be spread out like an umbrella, and when not in use, it can be folded compactly for easy storage, allowing you to use the deck space more effectively.
It is used by anglers and is also called a fisherman's anchor.
■Weight: 4.0kg
■Material: Iron + molten galvanized ■Recommended boat size: Less than 3-4m (10-13f)
■It is effective on bottoms such as muddy sludge, stones, rocky areas, and reefs, and is suitable for relatively hard bottoms.
■Anchor rope guide (mm): 8-9mm

[Original storage bag]
The highly stain-resistant and waterproof fabric is convenient for storing small items in outdoor situations.
There is a cushion pad on the bottom, so it can also be used as an anchor bag.
It is okay to use a 6kg anchor.
The mouth opens wide, making it stress-free to put in and take out small items.
There is also a top button to prevent things from falling out.
■Product size: Bottom diameter 19cm x height 34cm

[Shipping information] Due to the shape of the product, it cannot be bundled with other products.

7-Pin Wiring Socket for Trailer Lights

■ Material: Die-cast aluminum
■ Compatible with: TIGHTJAPAN, SOREX, SUNTREX
※Wiring sold separately

■Size: 125 x 238 x 50mm (length x width x thickness)
■Left and right common shape (sold in units of 1 piece)

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.
The conventional MAX TRAILER (LED tail lamp specification car)
It is a tail lamp with an original design that lights up in a tube shape when turned on.

【Guidance】
We also have a ``Raise Tail Lamp Kit'' that includes a Raise Lamp, Smoothing Cover, Bumper Base, and Number Bracket.

Product number 1216-61, 1216-62, 1216-63

Triangle reflector with built-in LED 18 chips
Waterproof performance that clears IP67 standard

●Size: 160mm on one side
●Lights up in conjunction with brake and small.
●Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■M10 75x45 square pipe vertical bolt

■Bolt size AxBxC: 100x60xφ10

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

This new stainless steel ratchet tie-down prevents the hook from falling off when securing items by adding a "stop" function to the "hanging" function of the hook, making it easier and more secure to tie down.

■Material (hook part): Stainless steel (resin coated)
■Fixed side belt length: 300mm
■Retracting side belt length: 3,200mm
■Belt width: 25mm
■Working load: 400kg
■Breaking strength: 800kg

■Foldable type
■Material: Steel
■Maximum load: 360kg
■Stroke: 280mm
■Tire diameter: 140mm

■Quantity: 1 piece
■For shaft Φ28

【please】
*Please let us know if you are using it for innerwear or outerwear.
*For hub seals, please prepare your vehicle inspection certificate, etc., and then contact us after measuring the actual product you have.

■Quantity: 2 pieces 1 set
■Support: Common for regular cars and light cars

★The Viper paint has been changed to a black paint, and the strap has been changed to a loop. ★

■Material Tower, winch: Steel black
■Winch specifications: single gear
■Load capacity: 540kg
■Accessories: Loop strap, set of mounting bolts
*The color has been changed from Viper color to black.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.

More affordable than OEM parts!

■Unit of sale: 1 pc.
SEA-DOO End Fitting
*Equivalent to OEM Part No. 269501717