Collection: Ball mount/mount cover

■It is attached to the mount socket of the hitch member, and the ball mount can be attached with the cap attached.

■Openable cover cap.

■Compatible with: Class III (50×50mm square type)

■Material: Made of ABS

Mainly occurs when using a domestic standard (50mm) mount on a US hitch member (2 inch 50.4mm).
Reduces rattling of square hitch mount.

[1]0211-02 1.5mm
[2]0211-01 2.0mm

●This is a member cover designed specifically for tight hitches and is secured with a ball mount key.
●The tail member is emphasized more stylishly.

■Inlet type: 50φ round, 50mm square, 40mm square ■Material: ABS *There are multiple inlet types, so please choose the type you like.

●O-ring for SOREX ball mount (SRX-082, SRX-123)●This is an O-ring to prevent the ball mount from wobbling.
[Quantity] 2 pieces per set

Ball mount with O-ring (SRX-071) to reduce rattling noise during towing
■Shaft diameter: φ19mm
■For SOREX hitch members only

*Hitch ball and detachable pin are not included.
*Due to individual differences, processing may be required due to misalignment of hole positions.

【Notes on ordering】
*Please provide the "car model" so that the class can be stamped.
*Cancellations, changes, and returns will not be accepted if the model verification result is not compatible.

【Information】
SOREX ball mounts are available in matte (SRX-123), mirror (SRX-082), square type exclusive (SRX-080), and vehicle-specific types.
Types different from your existing mount may not be usable. Please be careful.

SRX-123B6
SRX-123B7
SRX-123B8
SRX-123B9

Stainless steel ball mount with O-ring (SRX-071) to reduce rattling noise during towing.
■Shaft diameter: φ19mm
■For SOREX hitch members only

*Hitch ball and detachable pin are not included.
*Processing may be required due to misalignment of hole positions caused by individual differences.

【Precautions when ordering】
*Please provide your "car model" so that we can engrave the class.
*Cancellations, changes, and returns will not be accepted if the model confirmation result is not a mismatch.

【Information】
Solex ball mounts are available in matte (SRX-123), mirror finish (SRX-082), square type exclusive (SRX-080), and vehicle-specific types.
Please note that types different from your existing mount may not be usable.

SRX-082B6
SRX-082B7
SRX-082B8
SRX-082B9

Steel Ball Mount
■Shaft Diameter: φ19mm
■For SOREX Square Type (SX3002) Hitch Members Only

※Hitch ball and quick-release pin are not included.
※Processing may be required due to misalignment of hole positions caused by individual differences.

【Notes on Ordering】
※Please provide your "vehicle model" for grade stamping.
※Cancellations, changes, and returns will not be accepted if the model verification result is not compatible.

【Information】
Sorex ball mounts are available in matte finish (SRX-123), polished finish (SRX-082), square type exclusive (SRX-080), and vehicle-specific types.
Please note that types different from your existing mount may not be usable.

SRX-080B1
SRX-080B2
SRX-080B3
SRX-080B4
SRX-080B5

Mount cover attached after removing SOREX ball mount
This item is long-awaited by fans and is gaining popularity! Produce hitch members in style.

●Material: ABS resin
●Compatible with: SOREX hitch member 40 x 40 mm square only
*Compatible types: SUS hitch member, NEW hitch member, combination hitch member
*Please note that it is not compatible with dedicated ball mounts or LHC hitch members.

[Product Specifications]
■Material: Steel plating

■Applicable: Class 3, Mount lock pin diameter: 16mm

■Square type width: 2 inches

■Maximum traction force: 1575-2000kg

Hitch ball shaft diameter: 25mm

■ Drop: 6 inches

[Product Specifications]

■Material: Steel plating

■Applicability: Class 3, Mount lock pin diameter: 16mm

■Square type width: 2 inches

■Maximum traction force: 1575-2000kg

Hitch ball shaft diameter: 25mm

■ Drop: 4 inches

[Product Specifications]

■Material: Steel

■Applicable: Class 3, Mount lock pin diameter: 16mm

■Square type width: 2 inches *Individual differences may occur

■Maximum traction force: 1575-2000kg

Hitch ball shaft diameter: 25mm

■ Drop: 3 inches

[Product Specifications]

■Material: Steel plating

■Applicability: Class 3, Mount lock pin diameter: 16mm

■Square type width: 2 inches

■Maximum traction force: 1575-2000kg

Hitch ball shaft diameter: 25mm

■ Drop: 2 inches

[Product Specifications]

■Material: Steel plating

■Applicable: Class 3, Mount lock pin diameter: 16mm

■Square type width: 2 inches

■Maximum traction force: 1575-2000kg

Hitch ball shaft diameter: 25mm

■ Drop: 8 inches

[Reason for outlet sale]
●Due to the nature of the product, there may be some rattling. (See photo)
●This is a new product that can be used without any problems, but please refrain from purchasing if you are concerned about the appearance.

*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
*We cannot answer inquiries about product specifications even if you only refer to the information listed.

[Product Specifications]
■Material: Steel ■Compatible with: American Class 3, Mount lock pin diameter: 16mm
■Square type Width: 50mm Square type ■Maximum traction force: 1575-2000kg
Hitch ball shaft diameter: 25mm
■Drop: 2 inches■Size: Please refer to image number 4.
(Please note that there may be individual differences, so please use this as a guide only.)

■It is a mount cap for the hitch member mount socket.

■Fix to the mount cap with a receiver lock (1/2" 12.7mm) pin.

■Material is plastic with chrome plating finish to create a stylish hitch member.

■Compatibility: Class II (Square type, inner diameter 32 x 32 mm compatible)

■Material: Plastic (chrome plated)

●This is a special bag to store when the ball mount is removed.
●Does not make the interior of the car dirty, and you do not have to worry about where to put it.
●Cushion material is sandwiched between the fabrics.

[Disclaimer]
*The ball mount and hitch ball in the image are not included.

[Slant EX type low type round pipe]
A:50Ф B:270mm C:50mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant EX type round pipe]
A:50Ф B:300mm C:110mm D:19mm

■Material: Stainless steel SUS304

For tight japan hitch

[Slant type low type round pipe]
A:50Ф B:175mm C:50mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant type long round pipe]
A:50Ф B:215mm C:150mm D:19mm

■Material: Stainless steel SUS304

for tight japan

[Slant type round pipe]
A:50Ф B:175mm C:110mm D:16mm

■Material: Stainless steel SUS304

for tight japan

[Square slant type]
Square slant type low type stainless steel 0209-13

A: 50mm x 50mm
B: 210mm
C: 50mm
D: 16mm

for tight japan

[Square slant type]
Slant type low type steel 0209-12

A: 50×50mm
B: 210mm
C: 50mm
D: 16mm

for tight japan

[Square slant type]
Slant type stainless steel 0209-11

A: 50×50mm
B: 210mm
C: 110mm
D: 16mm

for tight japan

[Square slant type]
Slant type steel 0209-10

A: 50×50mm
B: 180mm
C: 50mm
D: 16mm

for tight japan

[Slant Square Type]
Slant type, long type, steel, 0208-18

A: 50 x 50 mm
B: 240mm
C: 150mm
D: 16mm

For Tight Japan

[Square slant type]
Slant type EX steel 0208-17

A: 50×50mm
B: 300mm
C: 110mm
D: 16mm

for tight japan

[Square slant type]
Slant type low type EX steel 0208-16

A: 50×50mm
B: 270mm
C: 50mm
D: 16mm

for tight japan

[Slant EX type round pipe]
A:50Ф B:300mm C:110mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant EX type low type round pipe]
A:50Ф B:270mm C:50mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type long round pipe]
A:50Ф B:240mm C:150mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type round pipe]
A:50Ф B:210mm C:110mm D:19mm

■Material: Steel: Black powder coating

for tight japan

[Slant type low type round pipe]
A:50Ф B:175mm C:50mm D:19mm

■Material: Steel: Black powder coating
for tight japan

[Straight round pipe]
A:50Ф B:145mm D:20mm

■Material: Steel: Chrome plated

for tight japan