Collection: Steering Parts: Handlebars

UNLIMITED Runabout Model Exclusive Handlebar

Wrap it around the handlebar for use.
■Length: 23cm

Standard equipment on the UNLIMITED handlebars below.
Product No.:
UL31002
UL040
UL040CA
UL040CA-2
UL31001
　

[Compatible] Can be installed on runabout models *Depending on the arrival time, the logo may not be displayed. note that.

[Included] UL31100 bar pad included (pad length 230mm) *Color cannot be specified

【specification】
■Material: Aluminum ■Type: φ7/8" (22.4mm) standard ■Total length: 7900mm
■Handlebar clamp area: 170mm
■Grip end position: 110mm

The wide handle allows for aggressive riding.
The handlebar is made from aluminum alloy, which is also used as an aircraft material, to make it even stronger and lighter.
Also, the wide handle allows for easy cutting.
The grip position is lower than the stock handlebar, so you can maintain a low stance and lower your line of sight, allowing you to corner in the best position.

[Disclaimer] *Depending on the time of arrival, the logo may not be present.

Handlebar for single model only

■Size: 14cm

UL31101GY Gray
UL31101RD Red

UNLIMITED handlebar and handlebar with inner diameter 13~20φ

[Quantity] 1 set left and right

It is possible to extend the handlebar by 5cm on each side.

[Compatible models]
YAMAHA 2022 and later X models

Design features include billet aluminum construction for maximum strength and stiffness.
Directly replaces bulky OEM mechanisms with stronger, lighter units.
Delivering precision feel and confidence, improving reliability and comfort to push your craft to its limits.
Compatible with standard 7/8" MX bars and provides adjustable quick steer functionality.

Main features:
Billet aluminum construction provides superior strength and rigidity Compatible with all common 7/8" handlebars Includes an aluminum cover plate to surround the steering cavity Precision machined steering arm features an adjustable Features a 'quick turn' setting Cutting-edge race styling Anodized all aluminum parts to prevent corrosion Available in black, blue and red anodized

Must use aftermarket handlebars and grips.

[Adaptation] Stand-up model
KAWASAKI Kawasaki
YAMAHA

Adopts 3.75° based on ergonomics.
Achieve the best riding position.

[Product specifications]
■Total length: 63.5cm
■Included: Handlebar pad included

[Compatible models] SEA-DOO
RXP-X 300
RXT-X 300
GTX 300 ALL
GTX 230 ALL
WAKE Pro 230
GTR 230(2019-2020)

Since the stock intake hoses are not strong enough, the hoses connecting the supercharger to the intercooler and from the intercooler to the throttle become deformed, creating resistance to smooth intake.

This exclusive silicone hose has high strength and prevents deformation. In addition, the 50mm large-diameter blow-off valve releases unnecessary pressure and protects the supercharger unit when the throttle is turned off .

The billet lever set for Yamaha RiDE models offers superior control, comfort, cutting-edge style, and practicality.
Directly replace OEM plastic parts with high quality CNC billet machined throttle and brake/reverse levers.
Featuring more comfort features for a precise feel and easy installation with included instructions.

[Compatible models]
2021 and newer Yamaha GP models
2021 and newer Yamaha VX models (excluding VX-C)
2022 and newer Yamaha FX models

[Adaptation] Stand-up model
KAWASAKI Kawasaki
YAMAHA

Adopts 3.75° based on ergonomics.
Achieve the best riding position.

[Product specifications]
■Total length: 63.5cm
■Included: Handlebar pad included

【Compatible models】
KAWASAKI ULTRA 310LX/310LX-S (22~)

A cover that protects the back side of the throttle lever (KSRD) when replacing the steering mount of the ULTRA series ( 22~ ).

[Disclaimer]
Specifications such as coloring and texture may change depending on arrival and shipping time.

[Compatible models] SEA-DOO iTC/iBR equipped model
Lever billet case for electronic throttle (iTC) and I-brake (iBR) systems

[UL36006] SEA-DOO mode select system case

The handlebar can be replaced by relocating and attaching the mode select button.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Applicable models] SEA-DOO iTC/iBR equipped model Lever billet case for electronic throttle (iTC) and I brake (iBR) system

[UL36005] Case for SEA-DOO mode select system

Left side: Sports mode/Eco mode VTS button case

The handlebar can be replaced by relocating and attaching the mode select button.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Compatible models] SEA-DOO iTC equipped model Lever billet case for electronic throttle (iTC) system

[UL36004] Right side: Electronic throttle (iTC) lever case

Move the iTC and iBR sensors to the housing case,
Handlebars can be replaced by attaching a lever.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Compatible models] SEA-DOO iBR equipped model
Lever billet case for I-brake (iBR) system

[UL36003] Left side: I brake (iBR) lever case

Move the iBR sensor to the housing case,
Handlebars can be replaced by attaching a lever.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★The billet lever case in the above kit can be purchased separately.

[Compatible models] SEA-DOO iTC/iBR equipped model
Start button/cruise control button case (common shape)
*Two pieces are required for one vehicle for cruise function equipped models (RXT-IS, GTX, WAKE)*
*Common product for left and right

■Quantity: 1 piece
(Models equipped with cruise function (RXT-IS, GTX, WAKE) require 2 of these products for 1 vehicle)

Start and cruise control buttons can be relocated to the case.
A sophisticated and stylish design made from machined aluminum that eliminates waste.

UNLIMITED iTC/iBR billet switch case kit (product number: UL36000)
★This is a product that allows you to purchase the billet switch button case in the kit above separately.

[Applicable models] SEA-DOO iTC/iBR (*) Equipped models *For electronic throttle (iTC) and I-brake (iBR) systems after 2009 (*excluding 2018 model)

Aluminum billet housing case for the levers and switch buttons of the above models.A sophisticated and stylish design made from machined aluminum that eliminates waste.
The iTC and iBR sensors are relocated to the housing case and the handlebar can be replaced by attaching a lever.

[Kit contents] Total 6 parts [1] Throttle lever housing,
[2] Reverse lever housing,
[3] MODE/SET button housing,
[4] Suspension/Cruise button housing,
[5] START/STOP switch housing,
[6] Cruise switch housing

[Disclaimer] *Only the above kit contents are included; the products used in the installation image are not included.

[Compatible] Can be installed on runabout models

[Included] UL31100 bar pad included (pad length 230mm) *Color cannot be specified

【specification】
■Material: Aluminum ■Type: φ7/8" (22.4mm) standard ■Total length: 850mm
■Handlebar clamp area: 130mm
■Grip end position: 65mm

Minimize clamping area, grip, switch case,
Handlebar with maximum throttle lever aria.
Bending tie compatible with recent models.
The shape that hangs toward the bar end creates a riding form that naturally closes the sides when cornering.

【Compatibility】Can be installed on runabout models. 【Type】Standard 22.4mm handlebar diameter 【Included】Comes with a handlebar pad (pad length: 220mm)

●The wide handlebars provide a natural and aggressive riding experience. ●Due to the wide handlebars, it is easy to adjust (cut) the handlebars to your desired length. ●The racing handlebar, made from aircraft-grade material, is coated with carbon fiber, creating a Spartan yet stylish look. ●The angle and length are based on conventional racing bars, but with scales printed to accurately set the mounting position, which is convenient for setup. ●This is the world's first innovative handlebar exclusively for watercraft, with absolutely no SWEEP (pullback). It is used and recommended by top riders worldwide. Its feature is that it eliminates interference between the handlebar and your side during low-center-of-gravity cornering, allowing you to maintain a more forward-leaning posture.

[Compatible models]
KAWASAKI STX160LX/STX160

This cover protects the back side of the throttle lever when replacing the steering wheel of the STX160 series.

■Material: Stainless steel

For fat bar (tapered handle) only

■Size: 15cm

【correspondence】
runabout model
Compatible with 28.6mm handle clamp
*A separate fat bar clamp (UL061 recommended) is required for installation.

■Handle diameter: Clamp mounting part 28.6mm,
■Grip lever mounting part 22.±0.2mm

A wide handle with a thick clamp part and excellent flexibility and strength.