Collection: All items

●It is a swivel base whose upper part rotates 360 degrees.

●Used for casting sheets, folding sheets, etc.

●Material: Stainless steel

-Mounting hole size: 12.8-14.3cm x 12.8-14.3cm

When used, it eliminates the rear center of gravity when a single person is on a small boat, accelerates the transition to a planing state, and enables stable running.
This is an extension bar that can be attached to the throttle section of an outboard motor or electric motor when the handle is short and difficult to maneuver.

[Installation] Just place it over the grip and tighten the knob! No tools required. Easy to put on and take off.
*If the handle diameter is too small, please adjust it with the included rubber plate.

【Product details】
■Applicability: Ideal for Japanese boats, U-type boats, and fishing boats.
■Material:
→Body: Aluminum
→Other parts: Plastic
■Compatible with: Grip outer diameter: 36-54Φmm
■Telescopic 620-1020mm steplessly adjustable
■With curl cord for extension of kill switch

【please note】
The longer the handle, the worse the turning angle of the handle, so please be careful when maneuvering the boat.

Since it is intended for use with a low horsepower outboard motor, there is a risk of damage if used with a high horsepower outboard motor.
Avoid using outboard motors with more than 15 horsepower.

Ceramic Heater
This heater can be rotated 360 degrees left and right, and can be used to defrost or defog windshields, or as a small area heater.

■DC12V・150W
■Comes with cigarette lighter plug cord
■Cord length: approx. 1.8m
■Size: W114 x H78 x D152mm

【Please note】
※This product is not powerful enough to warm an entire vehicle interior.

Camper Heavy equipment Boat Car Automobile Heating Warm Foot heater Defogger Defroster Ship Driver's seat Dashboard Windshield Defroster For inside the company 13021-12

●Anemometer with display function of wind speed, average wind speed, and maximum wind speed.

●It is a simple and easy-to-operate model with only the most frequently used wind speed display for Wind Mate 200 (product number: 24065) and Sky Mate.

●It can be used for a variety of purposes, including marine sports such as yachting, windsurfing, and dinghies, wind speed measurements at outdoor events, golf and track and field events, and air conditioning equipment measurements.

●The main unit is drip-proof, so you can use it in the rain or touch it with wet hands.

●Wind speed display can be selected from knots, per hour, per second, and miles.

●The storage is a butterfly type, and it can be folded to a size that fits in your pocket.

- Comes with a strap that is convenient for hanging around the neck

●The main body has a screw hole for fixing it to a tripod, so you can take measurements while it is fixed for a long time.

*****specification*****
◆Display type: Wind speed, average wind speed, maximum wind speed
◆Temperature display: 20 to 55 degrees Celsius
◆Accessories: Neck strap
◆Power: Lithium battery CR2032
◆Material: ABS resin
◆External dimensions: Height 142x Width 47x Thickness 20mm
◆Weight: 95g
◆Measurement range: Wind speed 0.1-40m

●A battery switch that supplies two systems from two batteries; the switch position is from battery 1 to connect/cut off power to two devices. Battery 2 → Connect/cut off power to two devices. Battery 1+2 → Connect/cut off power to two devices. All batteries 1+2 are cut off. It has 4 ways.

●The e-series is ideal for boats equipped with small to medium-sized diesel engines.

●Manufactured by BLUE SEA, which boasts a top market share in the United States for electrical wiring parts related to RVs and boats, and is recommended by many builders.

●Continuous withstand current: 350Amp

●Momentary withstand current: 1750Amp (2.5 seconds)

●Maximum voltage: 48V

●Size: 97.8×97.8mm

●Terminal stud: 9.5mm

◆◆◆Main features◆◆◆

●The connection terminal uses highly conductive copper and is coated with corrosion-resistant tin plating. Achieved reliable wiring.

●The ring sticker and knob that indicate the switch position use luminescent labels. You can operate it without any mistakes even in dark places.

●You can tell that the knob is firmly in each position by a firm "click" response.

●There are two installation methods. Compatible with wall mounting and stationary mounting methods.

[Application] For stubborn stains such as black spots on exhaust ports.
[Applications] FRP, metal, painted surfaces
[How to use] Wait for a while after spraying, then rinse with a hose.

Removes especially stubborn dirt that floats to the waterline during navigation.
Can be used on FRP, metal, and painted surfaces. It is also effective for removing black stains from exhaust ports.
●Capacity: 650ml

●Light and flexible 8-ply polypropylene rope.

●Features a good feel and is easy to tie and untie.

●Does not sink in water. (It floats even in fresh water)

●φ12×200m.

*[Product number 23521] 15m is also available.

●Light and flexible 8-ply polypropylene rope.

●Features a good feel and is easy to tie and untie.

●Does not sink in water. (It floats even in fresh water)

●φ10×200m.

*[Product number 23520] 12m is also available.

●Light and flexible 8-ply polypropylene rope.

●Features a good feel and is easy to tie and untie.

●Does not sink in water. (It floats even in fresh water)

●φ12×15m

*[Product number 23522] 200m is also available.

●Light and flexible 8-ply polypropylene rope.

●Features a good feel and is easy to tie and untie.

●Does not sink in water. (It floats even in fresh water)

●φ10×12m.

●An air vent and O-ring set exclusively for stainless steel portable cans.
●Please use as a spare or in case of damage or loss.

*AB-10 / AB-10F / AB-20 / AB-20F Stainless steel carrying cans only
Repair Parts

●Aluminum cap exclusively for stainless steel cans.
●Please use as a spare or in case of damage or loss.

*AB-10 / AB-10F / AB-20 / AB-20F Stainless steel carrying cans only
Repair Parts

●This is a set of bellows nozzle and gasket for stainless steel portable cans.
●Please use as a spare or in case of damage or loss.

Nozzle spout (tip) dimensions:
Inner diameter: approx. 19-20mm
Outer diameter: approx. 22-23 mm
Pipe length: 24cm

*AB-10 / AB-10F / AB-20 / AB-20F
Repair parts for stainless steel portable containers

●Drilling size: 24.3φmm
-Flange size: 55 x 36.7mm
●Screw hole: φ5mm
- Distance between screws and centers: Approx. 41mm

*Main body only, mounting screws etc. are not included.

[Product specifications]
■Type: Pipe mounting type
■Material: Plastic
■Size: Total length 295mm
■Holder inner diameter: 43φ
■Pipe diameter that can be installed: 19 to 25φ (mm)
...
■Can be fixed at any 360 degree angle

●Movable type with 360° angle adjustment
●Reasonable rod holder for pipe installation made of resin.
●By fixing the bracket to the pipe and tightening the bolt that fixes the rod holder and bracket at any position.
Fix the rod holder at the most convenient angle.

[Product specifications]
■Type: Chrome
■Material: Plastic
■Flange diameter: 48mm
■Maximum thickness when inserting flange: 39mm
■Effective length of hose insertion part: 34mm
■Compatible with hose inner diameter 28.5mm

●This is a through hole for discharging the bilge pump overboard.
●The ABS resin has been treated with 5 layers of surface treatment to create a chrome finish that is scratch resistant and hard to peel off.
●Although the material is plastic, it looks like stainless steel and has a luxurious feel.

[Product specifications]
■Type: Chrome
■Material: Plastic
■Flange diameter: 42mm
■Maximum thickness when inserting flange: 30mm
■Effective length of hose insertion part: 30mm
■Compatible with hose inner diameter 19mm

●This is a through hole for discharging the bilge pump overboard.
●The ABS resin has been treated with 5 layers of surface treatment to create a chrome finish that is scratch resistant and hard to peel off.
●Although the material is plastic, it looks like stainless steel and has a luxurious feel.

[Product specifications]
■Quantity: 2 pieces
■Material: Nylon
■Body size: L88 x W43 x H22mm
■Compatible with: Ropes up to 10mm diameter
■Mounting hole size: 5mm

This is a very convenient fixture that allows you to easily secure ropes with one hand.
You can easily fix the rope by simply passing the rope through it alternately without tying it.
It can be used in a variety of ways, such as hanging fenders, mooring ships, loading platforms for pickups, and trailers.

Once secured, the rope will not come off even if strong tension is applied.
When removing it, you can easily remove it by removing the ropes passed through it alternately.

[About the product]
This product cannot be specified as the color may vary depending on the arrival time. Please note.

[Material] Stainless steel
[Quantity] 500 pieces
Size: width 11.5mm x foot length 6mm

It is a round camp plate with stable strength as it is firmly fixed at 4 points.
Made of rust-resistant stainless steel.

■Material: Stainless steel
■Size: Length 52 x Width 52 x Height 32 x Wire diameter 8 x Ring inner diameter 40mm

It is a round camp plate with stable strength as it is firmly fixed at 4 points.
Made of rust-resistant stainless steel.

■Material: Stainless steel
■Size: Length 42 x Width 42 x Height 25 x Wire diameter 6 x Ring inner diameter 35mm

High strength 277

●Contents: 50ml (liquid type)
●Recommended screw diameter: M50 or less
- Destruction/escape torque (N m): 32/32
●Temperature range (℃): -55 to 150
●Color: red

[Outlet reason] Special price for stock replacement

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

[Compatible] Ring thickness up to 1.2 to 6.3 mm regardless of cylinder bore
[Application] When disassembling or assembling an engine, you can smoothly attach and detach piston rings that are easy to break.

●A convenient tool that can be used for everything from cars to trucks.
●Equipped with a stopper that allows you to work without expanding the piston ring more than necessary.

[Reason for outlet sale] Special price to replace inventory.

*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
* Regarding product specifications and compatibility, we can only provide information as stated, and we are unable to answer any inquiries.

POWERBUILT Ratchet Box Handle 12mm

[Outlet reason] Special price for stock replacement.
★Roughness and rust on the surface, and peeling of the logo on the grip (see photo)

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*Product specifications and compatibility are only listed.

POWERBUILT Ratchet Box Handle 10mm

■This drain plug is indispensable for draining water from boats and bilges.

■By bending the lever part 90 degrees, the rubber part expands and fixes.

■Material (main body): Brass + rubber

■Adaptation: Hole diameter 31φ

■This drain plug is indispensable for draining water from boats and bilges.

■By bending the lever part 90 degrees, the rubber part expands and fixes.

■Material (main body): Brass + rubber

■Applicable: Hole diameter 25φ

[Reason for outlet sale] Special price to replace inventory.

*This is a new, unused product.
*This is a clearance sale item and may have dirt or other impurities that do not affect its functionality.
*Due to the special price, returns or exchanges are not accepted.
* Regarding product specifications and compatibility, we can only provide information as stated, and we are unable to answer any inquiries.

[Size] Total length 15cm
[Application] Stops leaks by clamping the hose [Compatible] Hose diameter up to 13 mm

The lock ring in the middle of the clamp moves freely and locks the hose in the crushed position.
To release it, simply squeeze it again and return the lock ring to the lever's raised position.

Suitable for small boats, bass boats, yachts, etc.
The surface is galvanized (dissolved galvanized) to protect the iron from rust, making it highly durable and weather resistant.
The claws can be spread out like an umbrella, and when not in use, it can be folded compactly for easy storage, allowing you to use the deck space more effectively.
It is used by anglers and is also called a fisherman's anchor.

[Product specifications]
■Suitable areas for use: Effective on bottoms such as mud, sludge, stones, rocks, and reefs, and is effective on relatively hard bottoms.
■Recommended boat size: 4-6m (14-19f)

■Material: Iron + melt galvanized processing
■Anchor rope guide (mm): 9-10mm

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・Shipping fee will be charged for up to 2 items.

Suitable for small boats, bass boats, yachts, etc.
The surface is galvanized (dissolved galvanized) to protect the iron from rust, making it highly durable and weather resistant.
The claws can be spread out like an umbrella, and when not in use, it can be folded compactly for easy storage, allowing you to use the deck space more effectively.
It is used by anglers and is also called a fisherman's anchor.

■Suitable areas for use Effective on bottom sediments such as mud, sludge, stones, rocky areas, and reefs, and is suitable for relatively hard bottom substrates.
■Recommended boat size: Less than 3-4m (10-13f)
■Material: Iron + melt galvanized processing

■Anchor rope guide (mm): 8-9mm (rope sold separately)

[Shipping information] Due to the shape of the product, it cannot be bundled with other products.

Suitable for small boats, bass boats, yachts, etc.
The surface is galvanized (dissolved galvanized) to protect the iron from rust, making it highly durable and weather resistant.
The claws can be spread out like an umbrella, and when not in use, it can be folded compactly for easy storage, allowing you to use the deck space more effectively.
It is used by anglers and is also called a fisherman's anchor.

■Suitable areas for use Effective on bottom sediments such as mud, sludge, stones, rocky areas, and reefs, and is suitable for relatively hard bottom substrates.
■Recommended boat size: Less than 3m (9f or less)
■Material: Iron + melt galvanized processing

■Anchor rope guide (mm): 7-8mm

[Information regarding delivery]
・Due to the product shape, it cannot be bundled with other products.