Collection: All items

●Series: CONCORD
●Pitch size: 16/21
●4 blades
●Applicable pump diameter: 159mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA012)

[Compatible models] SEA-DOO
RXTis260 / RXT-X260 / RXTas260 / RXT260 Limited engine/modified engine recommended
GTX LTD is 260 / GTX LTD is255 Limited engine/modified engine recommended
RXP-X260 / RXP-X255(09-) Limited engine/modified engine recommended
GTR215 / RXT215(09-) / WAKEPRO215(09-) / GTX215(10-) Limited engine/modified engine recommended
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 15/21
●4 blades
●Applicable pump diameter: 159mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA012)

[Compatible models] SEA-DOO
RXT is260 / RXT-X260 / RXT as260 / RXT260 Stock engine (normal boat)
GTX LTD is 260 / GTX LTD is255 stock engine (normal boat)
RXP-X260 / RXP-X255(09-) Stock engine (normal boat)
GTR215 / RXT215(09-) / WAKEPRO215(09-) / GTX215(10-) Limited engine/modified engine recommended
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 15/20
●4 blades
●Applicable pump diameter: 159mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA012)

[Compatible models] SEA-DOO
RXTis260 / RXT-X260 / RXTas260 / RXT260 Limited engine/modified engine recommended
GTX LTD is 260 / GTX LTD is255 Limited engine/modified engine recommended
RXP-X260 / RXP-X255(09-) Limited engine/modified engine recommended
GTR215 / RXT215(09-) / WAKEPRO215(09-) / GTX215(10-) Limited engine/modified engine recommended
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 14/19
●4 blades
●Applicable pump diameter: 159mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA012)

[Compatible models] SEA-DOO
● RXTis260 / RXT-X260 / RXTas260 / RXT260 Limited engine/modified engine recommended
● GTX LTD is 260 / GTX LTD is255 Limited engine/modified engine recommended
● RXP-X260 / RXP-X255 (09-) Limited engine/modified engine recommended
● RXT215 (09-)/ WAKEPRO215 (09-)/ GTX215 (10-) Limited engine/modified engine recommended
● GTR215 stock engine (normal boat)

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 13/18
●4 blades
●Applicable pump diameter: 159mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA012)

[Compatible models] SEA-DOO
RXTis260 / RXT-X260 / RXTas260 / RXT260 Limited engine/modified engine recommended
GTX LTD is 260 / GTX LTD is255 Limited engine/modified engine recommended
RXP-X255(09-) Limited engine/modified engine recommended
GTR215 / RXT215(09-) / WAKEPRO215(09-) / GTX215(10-) Stock engine (normal boat)

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●SOLAS stainless steel wear ring 159mm (SRZ/SRX)
●Higher strength and durability than normal wear rings.

■BOX size: 463×252×385mm (approx. 37L)
■FRP
■Included: Mounting bolts (stainless steel), key

【Requests and Notes for Ordering】
※Please provide the following trailer information when ordering: (model, year, chassis number)
※This information will be used to confirm compatibility with the manufacturer when arranging the product.
※For more details, please refer to the image "Requests When Ordering."

■1600LBS
■Stainless steel mounting bolt included
*Strap not included

Mount cover attached after removing SOREX ball mount
This item is long-awaited by fans and is gaining popularity! Produce hitch members in style.

●Material: ABS resin
●Compatible with: SOREX hitch member 40 x 40 mm square only
*Compatible types: SUS hitch member, NEW hitch member, combination hitch member
*Please note that it is not compatible with dedicated ball mounts or LHC hitch members.

This bracket is compatible with both steel and aluminum wheels and can be mounted anywhere on the trailer.

【Requests and Precautions for Ordering】
*Please provide the following trailer information when ordering. (Model, Year, Chassis Number)
●Mounting Position: Select from side frame (45x75) or tongue (75x75)
●Model
●Year
●Chassis Number
*This information will be used to confirm compatibility with the manufacturer when ordering the product.
*For more details, please refer to the image "Requests for Ordering."

This bracket is compatible with both steel and aluminum wheels at any position on the trailer.

【Requests and Precautions When Ordering】
*Please provide the following trailer information when ordering: (model, year, VIN)
●Mounting position: Select from side frame (45x75) or tongue (75x75)
●Model
●Year
●VIN
*This information will be used to confirm compatibility with the manufacturer when ordering the product.
*For more details, please refer to the image "Requests When Ordering."

[Kit Contents] SOREX-specific steel bunk x 2, mounting bracket x 4
*Drilling is required for installation.

[Requests and Precautions When Ordering]
*Please provide the following trailer information when ordering: (Model, Year, Chassis Number)
*This information will be used to confirm compatibility with the manufacturer when arranging the product.
*For details, please refer to the image "Requests When Ordering."

[Shipping Information]
●Cannot be combined with other items...To prevent scratches and damage, this item will be shipped individually. Cannot be "bundled (combined)" with other items.
●Directly shipped product...This product is shipped directly from the manufacturer, so "cash on delivery" and "bundled (combined) shipping" are not available.
●Limited payment methods...Bank transfer or credit card only (cash on delivery not available)
●Shipping will be calculated per item: [Shipping Cost x Quantity].

●Foldable, invertible, large diameter hole

■Wheel size: 8 inches (20.3 cm)
■Maximum load: 679kg

This storage box can hold jerry cans and small items.

■Box size: W550 x D265 x H220mm
■Mounting U-bolt: 78 x 65mm

【Requests and Notes When Ordering】
※When placing your order, please provide the following trailer information: (model, year, chassis number)
※This information will be used to confirm compatibility with the manufacturer when arranging the product.
※For details, please refer to the image "Requests When Ordering."

【Product Information】
●No consolidation...To prevent scratches and damage, this item will be shipped individually. "Consolidated packing (consolidation)" with other items is not possible.
●Direct shipment...This product is shipped directly from the manufacturer, so "cash on delivery" and "consolidated packing (consolidation)" are not possible.
●Limited payment methods...Bank transfer or credit card only (cash on delivery not available)

This large storage compartment, located at the front of the trailer, can store wetsuits, life jackets, and more.
(Optional for ZERO500 / S50 only)

【Requests and Important Notes for Ordering】
※Please provide the following trailer information when ordering: (Model, Year, Chassis Number)
※This information will be used to confirm compatibility with the manufacturer when arranging the product.
※For more details, please refer to the image "Requests When Ordering".

【Delivery Information】
●Cannot be bundled…To prevent scratches and damage, this item will be shipped individually. "Bundled shipping" with other products is not possible.
●Direct shipment…As this product is shipped directly from the manufacturer, "cash on delivery" and "bundled shipping" are not possible.
●Limited payment methods…Bank transfer and credit card only (cash on delivery not accepted)
●Shipping costs will be calculated per item: [Shipping cost × Quantity].

Eliminates the inconvenience when moving a trailer, such as not having a place to hold it, or being in a low position and not being able to use force even if you attach a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

It can be installed if the shape of the bow tower is 45 x 75 and there is an installation space of about 20 cm at the top.
Can be installed to SOREX bow stop kit [Product number: ST-090-02, ST-088-01] *SOREX trailer MB cannot be installed due to the special bow stop.

■Stainless steel■Included: Mounting bolts (size: Φ10x47x100mm) and 2 sets of nuts

Steel retractable slide ramp
When not in use, it can be easily stored inside the bank.
Enables loading and unloading of PWC with minimal submersion of the trailer in water.
This reduces corrosion of trailer taillights and other components, as well as damage to undercarriage parts such as hubs.

■Rail height 2,200mm, width 410mm
■Maximum load 500kg
*May not be installable on some vehicle models.

[Delivery Information]
・Due to the shape of the product, it cannot be combined with other products.
・As this is a manufacturer-direct product, cash on delivery is not accepted.
・Shipping costs are per item.

A cargo frame that can be easily DIYed into a country-style cargo trailer.

*Drilling into the loading platform is required for installation.

"set content"
Only 4 pillars
*Wood (1x4) and mounting bolts are not included. You can purchase it at home centers, etc.

Galvanized PCD114.3 5-hole offset +0

*There may be some unevenness in the galvanized coating.

[Product Information]
Due to the prevention of scratches and damage, "combined packaging (bundling)" with other products is not possible.

As this is a large item, "shipping fees" will be incurred.

13 inch
Set of tire, wheel, and bracket

[Requests and Notes When Ordering]
* Please provide the following trailer information when ordering: (model, year, chassis number).
* This information will be used to confirm compatibility with the manufacturer when arranging the product.
* For details, please refer to the image "Requests When Ordering."

[Please Note]
* Shipping costs may be adjusted depending on the delivery area, so please be sure to check the reply email.
* As this is an取り寄せ item, cancellations, changes, or returns are not possible once the order is confirmed (delivery date provided).
* "Shipping fees" will apply as this is a large item.

【Please Note】
※Shipping fees will be adjusted depending on the delivery area, so please check the reply email.
※As this is an ordered product, cancellations, changes, or returns are not possible after order confirmation (delivery notification).
※Due to the large size of the item, co-shipping is not possible.To prevent scratches and damage, "combined packing" of all other products and identical products is not possible.[Quantity x Shipping] is required.

10 inch
Tire, wheel, and bracket set

【Requests and Precautions When Ordering】
*Please provide the following trailer information when ordering: (Model, year, chassis number)
*This information will be used to confirm compatibility with the manufacturer when arranging the product.
*For details, please refer to the image "Requests When Ordering."

【Please Note】
*Shipping fees will be adjusted depending on the delivery area, so please be sure to check your reply email.
*As this is an取り寄せ (ordered-to-stock) product, cancellation, changes, or returns are not possible after order confirmation (delivery date notification).
*Shipping fees will apply due to the large size of the item.

A set of protector and dust cover.
The bearing protector can be installed without removing the dust cap.
Grease can be filled from the grease nipple to the bearing inside the hub to protect the bearing.

●Sold in units of 1 piece.
[Size] Hub fitting outer diameter φ50.4mm

*We cannot accept delivery to private residences as this is a limited delivery item specified by a corporation/trade name (work place, etc.). *
Currently, we are unable to reflect the regular shipping charges when placing an order.
Therefore, please note that we will correct the specified shipping fee and provide new information.

●Hokkaido ¥18,700
●Tohoku ¥10,450
●Kanto/Shinetsu ¥9,900
●Hokuriku/Chubu/Kansai ¥9,900
●Chugoku/Shikoku ¥8,800
●Kyushu ¥9,900
*For Okinawa and remote islands belonging to each prefecture, we will provide a quote on a case-by-case basis, so please let us know.

●This is a boat platform that is ideal for maintenance and display of PWCs, boats, etc.
●Height can be adjusted to match the trailer loading platform.
●Equipped with locking swivel casters (2 on each side) for easy movement.
●The surface of the frame is galvanized (hot dip galvanized) and has excellent corrosion resistance.
*The bank part is made of wood*

[Notes when ordering]
*Since this is a made-to-order item, we cannot accept cancellations or changes after ordering.
*As this is a limited-edition product for corporations, we cannot accept delivery to private residences.

[Product specifications]
-Total length x height x width: 1,830 x 430 x 690mm
-Fixed casters x 2, flexible casters (with stopper) x 2

[Product information]
●Cannot be bundled...To prevent scratches and damage, "combined packaging (combining)" with other products is not possible.
●No returns or exchanges...Due to the characteristics of the product, we cannot accept returns or exchanges after shipping.
●Directly shipped items...Due to their large size, they will be shipped directly from the manufacturer.
●Items with designated shipping charges...Please check the shipping instructions.
●Cash on delivery payment not possible

Protector only.
●A bearing protector that allows you to fill the hub with grease from the grease nipple without removing the dust cap.

●Marine trailers are often submerged in seawater, etc. with their hubs, so constant maintenance such as replenishing grease is required to protect the bearings. This protector is very convenient.

■Material: Stainless steel
■Applicable hub cap size: 50.8mm

Water-resistant grease that is effective against oxidation and seawater.

●A necessary grease gun for injecting grease from the grease nipple of the bearing protector.

Galvanized PCD114.3 5-hole Offset +0

*The galvanized coating may have some irregularities.

[Product Information]
To prevent scratches or damage, "combined packaging (shipping together)" with other products is not possible.

Since this is a large item, "shipping costs" will be incurred.

This is a made-to-order product.

● One left and right set
● By reducing shocks and vibrations, it improves the running stability of the trailer and reduces impact on the cargo.

--- [Request when ordering] --------------------------------------- ----------
The following information is required for product arrangement.
Please fill in the following information in the request/remarks column when ordering.
● Trailer model name
● Trailer model year
● Stamped number (The number stamped on the front of the trailer.)
Example: For SOREX, notation like [Okayama] - [Okayama]
* As this is a made-to-order product, cancellations and changes will not be accepted after order confirmation (scheduled guidance).
Please note that returns will not be accepted.

*May not be installable depending on the vehicle model.

This is a set of 12-inch brackets, tires, and wheels.

【Requests and Notes for Ordering】
*Please provide the following trailer information when ordering: (Model, Year, Chassis Number)
●Mounting position: Select from side frame (45x75) or tongue (75x75)
●Model
●Year
●Chassis number
*This information will be used to confirm compatibility with the manufacturer when arranging the product.
*For details, please refer to the image "Requests for Ordering."

・Foldable double casters

Keeps the trailer level when parked, and is convenient for driving and moving the trailer. The double tires also provide stability.

●Foldable.

■Wheel size: 6 inches (15.2cm)
■Maximum load capacity: 453kg
Keeps the trailer level when parked, and is convenient for driving and moving the trailer.

●SOLAS stainless steel wear ring 155mm (SR)
●Higher strength and durability than normal wear rings.

●Series: CONCORD
●Pitch size: 13/21
●4 blades
●Applicable pump diameter: 155.5mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA011, SLA011A)

[Compatible models]
Limited engine recommendation/modified engine recommendation for SEA-DOO GTI SE 155 (2008-2013) / GTI SE 130 (2006-2016)
Limited engine recommendation/modified engine recommendation for SEA-DOO WAKE155 (2008-2018)
Limited engine recommendation/modified engine recommendation for SEA-DOO GTX155 (2002-2009)
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 12/20
●4 blades
●Applicable pump diameter: 155.5mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA011, SLA011A)

[Compatible models]
Limited engine recommendation/modified engine recommendation for SEA-DOO GTI SE 155 (2008-2013) / GTI SE 130 (2006-2016)
Limited engine recommendation/modified engine recommendation for SEA-DOO WAKE155 (2008-2018)
Limited engine recommendation/modified engine recommendation for SEA-DOO GTX155 (2002-2009)
*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

●Series: CONCORD
●Pitch size: 10/18
●4 blades
●Applicable pump diameter: 155.5mm
●Material: Stainless steel
●Product contents: Impeller, impeller seal (aluminum SLA011, SLA011A)

[Compatible models]
SEA-DOO GTI SE 155 (2008-2013) / GTI SE 130 (2006-2016) stock engine (normal boat)
Limited engine recommendation/modified engine recommendation for SEA-DOO WAKE155 (2008-2018)
Limited engine recommendation/modified engine recommendation for SEA-DOO GTX155 (2002-2009)

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.
*Modification: For race boats with engine parts replaced.

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

The lens is large and provides a nearly 180-degree field of view.
In addition, the lens mount and strap can now be attached, detached, and replaced more smoothly.

●Material: ABS plastic ●Lens: Polycarbonate lens (AF + AS + UV coating)
Weight: Approx. 350g
●Size: Free size (approx. 26cm long, 21cm wide)

This is a new concept face protector that protects your delicate face.
It protects the face from all kinds of obstacles such as needle-like splashes, rain, snow, wind and sunlight when driving at high speeds. It is easier to put on and take off than a full-face helmet, is lighter and easier to move around in, and is ideal for action sports such as PWC, boat fishing, trikes, ATVs, and buggies. It is made of highly durable ABS plastic, weighs only 900g, and is easy to move around in without tiring the neck.
The lenses are UV coated to ensure a wide field of vision.
You can also change the color of the lenses sold separately.
The back of the head has an elastic strap and is a free size.
The inside is comfortable with a soft foam lining.
Can be worn over most glasses.

*Please note that the structure is not designed to withstand strong impacts to the face.
*The standard lens is clear. [Optional lenses available separately]

The lens is large and provides a nearly 180-degree field of view.
In addition, the lens mount and strap can now be attached, detached, and replaced more smoothly.

●Material: ABS plastic ●Lens: Polycarbonate lens (AF + AS + UV coating)
Weight: Approx. 350g
●Size: Free size (approx. 26cm long, 21cm wide)

This is a new concept face protector that protects your delicate face.
It protects the face from all kinds of obstacles such as needle-like splashes, rain, snow, wind and sunlight when driving at high speeds. It is easier to put on and take off than a full-face helmet, is lighter and easier to move around in, and is ideal for action sports such as PWC, boat fishing, trikes, ATVs, and buggies. It is made of highly durable ABS plastic, weighs only 900g, and is easy to move around in without tiring the neck.
The lenses are UV coated to ensure a wide field of vision.
You can also change the color of the lenses sold separately.
The back of the head has an elastic strap and is a free size.
The inside is comfortable with a soft foam lining.
Can be worn over most glasses.

*Please note that the structure is not designed to withstand strong impacts to the face.
*The standard lens is clear. [Optional lenses available separately]

[Compatible models]
YAMAHA
YS-CD
YS-TP

■Material: Aluminum

[Adaptation]
YAMAHA
For YS-DF
For YV-CD

■Material: Aluminum

[Compatible models]
SEA-DOO SRX/SRZ

■Material: Aluminum

[Compatible models]
SEA-DOO SR 24mm shaft

■Material: Aluminum

[Compatible models]
YAMAHA YD (Concorde)
*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

[Compatible models]
KAWASAKI KA/KF/KG
YAMAHA YF/YG/YH (※)
*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

[Compatible models]
YAMAHA
YD (excluding Concorde) 18mm shaft
*For 760RZ/760VN and XL800, model number "SL009" is applicable.

■Material: Aluminum

[Compatible models]
YAMAHA Yamaha 15mm shaft
YB/YD (excluding Concorde)
*Part number "SL009" is compatible with 760RZ/760VN and XL800.

[Compatible models]
YAMAHA
YB/YD (excluding Concorde) 18mm shaft

*For YAMAHA 760RZ/760VN and XL800, model number "SL009" is applicable.

[Reason for outlet]
Special price for stock replacement.
★There is rust on the included impeller wrench (see image)

*This is a new and unused product.
*As this is a special sale item, there may be some stains that do not affect functionality.
*Due to the special price, we cannot accept returns or exchanges.
*We cannot answer any inquiries regarding product specifications or compatibility, as we only have information listed here.

[Applicable model] YAMAHA 700XL (99-04 model) for stock engine

■Accessories: Impeller wrench only (shaft holder not included)

●Made of aluminum, cavitation is reduced compared to rubber.

[Compatible models]
For YAMAHA Yamaha 144 pump
*Cannot be attached to SJ and slimline impellers.