Collection: All items

A cotton hoodie with an upgraded feel made of felt-like fabric.
In addition to the switching design, there is also a simple kangaroo pocket and the JTPLT logo embroidered on the chest.

■Material: 80% cotton, 20% polyester, brushed lining

[Chest measurement size/actual size when laid flat]
M: 115cm
L: 120cm
XL: 124cm
*Please note that there may be errors due to measurements taken by our staff.

A simple and natural design cap
The brim is arched.

■Free size

RIPCURL Flashbomb surf boots keep you warm in the water for longer. The inside, which touches your bare skin, features a pink brushed lining with Flash Lining technology, offering excellent heat retention, flexibility, and quick-drying properties.
They are finished with an SOS Entry System, SuperThin sole, stitchless compression strap, and a durable rubber sole construction. Additionally, the internal toe area has a divider for only the big toe, similar to tabi socks.

For winter marine sports, boots suitable for cold protection are essential.
The belt type can firmly secure the instep of your foot.
Also, the boot's interior has a split-toe design for the big toe, making it a recommended specification for beginners to advanced users.

【Caution】
・After using this product, please wash it with fresh water to remove dirt.
・Drying or leaving it in direct sunlight after washing may cause shrinkage or deterioration.
・Always dry it in the shade before storing.
・Never use a washing machine, spin dryer, or tumble dryer for washing.
・If placed in a sealed container while wet, the surface paint may transfer to other items.
・High temperature and humidity can cause bacteria to grow and lead to deterioration, so please wash it as soon as possible after use.

Excellent absorbency! Easy to put on and take off kids' towel poncho.
Sized for preschoolers and early elementary school children.

Made from microfiber fabric, it's fluffy, soft to the touch, and very lightweight.
It can be used not only for pools, beach trips, and water play, but also for all outdoor activities.
With its excellent absorbency, a bath towel is completely unnecessary.
The microfiber fabric is lightweight and compact for easy carrying.
Microfiber gently wraps around cold bodies after swimming in the ocean.

■Material: Microfiber (80% polyester, 20% nylon)

▶Click here for other TOOLS changing ponchos

This is a special life jacket designed for the safety of children.
Equipped with a rescue belt at the back of the neck that can be easily lifted even if you fall into the water, and a crotch strap to prevent your body from falling off.

There are 3 safety buckles in total, 2 on the torso and 1 on the crotch belt, which prevents the life jacket from loosening or lifting off the shoulders due to water currents. Available in sizes S to L, so please choose according to your child's physique. We recommend just the right size as a safety device.

■Applicable height size
S:110-130cm
M:120-140cm
L:130-150cm

■MATERIAL: Reflective tape/with rescue whistle

[Caution] Not compatible with legal equipment for small boat inspections. ●This product is a swimming aid. Please be sure to use it under the supervision of an instructor.
●If strong pressure is applied to the buoyancy material (foam), the buoyancy material (foam) may collapse and reduce its buoyancy, so please do not sit on it, place heavy objects on it, or roll it up or fold it.
●Please do not jump in while wearing it. The buoyancy material (foam) may twist due to water pressure and the product may no longer function properly.
●The buoyant material (foam) may deform and shrink under high temperatures. Never place it near fire, or use an iron, steam, or dryer. Also, do not leave it in a hot and humid place for a long time. This may cause discoloration or deterioration.
●If worn or damaged, both strength and buoyancy will decrease. Depending on usage and storage conditions, please use the product for approximately 2 years.
●When storing, wash with fresh water, drain thoroughly, and dry in a well-ventilated place out of direct sunlight before storing.

Beach Swimming River Playing Pool Water Playing Safety Aids Beat Edition
Children Infants Infants Kids Junior Marine Sports
ACTIVITIES WATERSPORTS Boat Yacht Kayak
SUP paddle board canoe snorkeling trekking life jacket life vest

ZAHRA KELL Signature Model with Tie-Dye Design

360° stretch neoprene accommodates every movement of the rider.
This neoprene vest, with its flexibility and soft feel, is the perfect choice for active scenes.
The liner uses highly insulating Fire Fur material, which is a welcome feature for women.
The front zipper and single buckle make it easy to put on and take off.

*Not approved for JCI small recreational watercraft inspection*

■Approximate Chest Size
M(10): 85-90cm
L(12): 90-95cm

■Manufacturer Recommended Weight
M(10): 55kg
L(12): 60kg

This is a toddler life jacket with a crotch strap.
This popular children's neoprene vest features a shark character print.
Made from a soft, wetsuit-like material, this life jacket is gentle on a small child's delicate skin,
and offers excellent thickness and protection.
This size also includes a crotch strap.

■MATERIAL Chloroprene

■Height: 90-100cm

Beach River play Pool Water play Safety aid Kickboard Children Toddlers Infants Kids
Marine sportsActivities WATERSPORTS Boat Yacht KayakSUP
Paddleboard Canoe Snorkeling Trekking Life vest

■Jettribe hybrid goggles (product number: JA-134 series) replacement arm ■Quantity: 1 set of 2 (different left and right)

Please choose according to the main body color.
JA-16362 White (JA-134WH)
JA-16363 Aluminum Black (JA-134SL)

【please note】
This product is for "JA-134".
Goggles with other model numbers cannot be used as they have different shapes.

■Material: Brass
JL003-2: 1/4 blind (threaded part 13mm: P1.25)
JL003-3: 1/8 pulse straight (threaded part 10mm: P0.9: outer diameter 7mm)

When changing the cooling hose routing or adding a bypass line,
Used to close holes that are no longer needed.

3/8Ф KAW 1100 or less YAM 1100 or less
1/2Ф KAW 1200 or more YAM 1200 or more S/D ALL
3/4Ф
●Prevents sand and dirt from entering together with the cooling water, reducing engine damage. The internal mesh requires regular cleaning.

56017/Total length A: 136.0mm Shaft diameter B: 12.5mm Recommended roller width: 99.0mm
56018/Total length A: 159.0mm Shaft diameter B: 12.5mm Recommended roller width: 127.0mm

[Product specifications]

■Size: Diameter/Total length/Eye diameter
F-1: 150mm /640mm /18mm
F-2: 191mm /635mm /22mm
F-3: 208mm/635mm/22mm
F-5: 279mm /762mm /24mm

●Polyform's air fender and F fender are extremely strong fenders.
●The eye part is reinforced with thick rubber, making it extremely durable.
●Can withstand the high pressure of not only small ships but also large ships.

【please note】
Nozzle is not included.
*Please purchase the nozzle (product number: 97561) sold separately.

【Compatible models】YAMAHA SJ (2021 and later models)
Yamaha SuperJet (TR-1)

PRO Series sponsons.
Position can be changed to suit your riding style.
Achieves agile cornering.
Excellent stability and grip in corners.

【Please note】
・If marked "取り寄せ" (backorder) or out of stock, please allow extra time for delivery.
・As this is an overseas order product, cancellations, returns, and exchanges are not accepted after an order has been placed.

■One size fits all
Excellent absorbency! This is a generously sized poncho for changing.
It's made of microfiber fabric, so it's very lightweight.
It can be used not only at the pool, beach, or for water activities, but also for all general outdoor scenes.

Due to its excellent absorbency, bath towels are completely unnecessary.
The latest microfiber fabric is very lightweight and compact for carrying.
The microfiber will gently wrap around your chilled body after coming out of the ocean.

■Finished dimensions: Body width 79cm / Length 111cm
■Material: Microfiber (80% polyester, 20% nylon)

▶Click here for other TOOLS changing ponchos

Changing poncho, change poncho, changing towel, towel poncho, surf poncho, marine poncho, jet ski, marine jet, personal watercraft, PWC, surfing, bodyboarding, wakeboarding, wake surfing, kiteboarding, flyboarding, diving, SUP, windsurfing, kayak, canoe, snorkeling, fishing, marine sports, skiing, snowboarding, trekking, camping, glamping, outdoor, sauna, sea, beach, pool, adult, hooded, ULUWEHI, SWELL, PAISLEY by SOLID, FAIRISLE

TOOLS TLS
MICRO FIBER PONCHO

■Material: T bolt, nylon nut all made of stainless steel

[Product specifications]
■Tightening range/clamp width/quantity

JL52-635714: 63.5~71.4mm / 19.0mm / 1 piece
JL52-826905: 82.6~90.5mm / 19.0mm / 1 piece
JL52-11431222: 114.3~122.2mm / 19.0mm / 2 pieces
JL52-15241651: 152.4~165.1mm / 19.0mm / 1 piece

Definitely recommended for models with a supercharger.
Traditional hose clamps will collapse if you tighten them too much, and fall out if you don't tighten them too much...
There was such a problem, but the tightening torque can now be managed.

With heavy duty high torque clamp,
Boasts torque performance more than three times that of normal worm gear clamps.
It is mainly used in exhaust and intake areas where vibration is likely to occur.
Tighten the T-bolt with a lock nut, so you don't have to worry about it coming loose.
It also has a structure that tightens the hose evenly, so you can grip the hose firmly.

The bolts and nuts are also made of rust-resistant SUS.
The nut uses a stainless steel nylon nut that is hard to loosen.
Adopts a ROLLED-EDGE design (R processing on both ends of the band makes it difficult for the hose to get wedged).

■Material: Stainless steel

[Product specifications]
■Size/Quantity
JL51-110133: 11.0~13.3mm / 10 pieces
JL51-155185: 15.5-18.5mm / 10 pieces
JL51-194226: 19.4~22.6mm / 10 pieces
JL51-224256: 22.4~25.6mm / 10 pieces
JL51-256320: 25.6-32.0mm / 10 pieces
JL51-436500: 43.6~50.0mm / 10 pieces
JL51-700780: 70.0~78.0mm / 10 pieces

Clamp using a special tool (product number: CH-207).
The clamping capacity is much greater than that of normal tightening clamps.
Used in SEADOO superchargers and important parts that must not come loose.

This hose has a special coating applied to its surface.

[Product specifications]
■For water (*no oil allowed)
■Size: Inner diameter/thickness/length
JL40SHL19RD: 19mm /4mm /1m
JL41SHL13RD: 13mm /4mm /1m
JL40SHL8RD: 8mm/4mm/1m

■Maximum pressure resistance for regular use 5kg/cm
■Regular heat-resistant temperature ~180℃

[Product specifications] All stainless steel hose clamp

 ■Material: Stainless steel

■Size/Quantity
7~16mm / 10 pieces
10~23mm / 10 pieces
16~32mm / 10 pieces
33~57mm / 10 pieces
47~70mm / 10 pieces
59~82mm / 5 pieces
71~95mm / 5 pieces
91~114mm / 5 pieces
118~140mm / 5 pieces

【PWC Compatible Models】For SEA-DOO SPARK

(For other models, see below)
*4-stroke models other than 300 and SPARK: DCPR8E
*300 models (RXT-X/RXP-X/GTX-LTD300): 296000407
●SEADOO Genuine Part Number: 415129403

*Image is for illustration purposes only

[Content capacity] 2L, 5L
[How to use] Put the detergent in a plastic bucket, apply it to the hull with a brush, etc., and wash it with water after 5 to 10 minutes.
[Application] A detergent for removing red rust from iron on FRP ships and dirt at the same time.

【please note】
*As this is an acidic detergent, please be careful not to get it in your eyes or directly on your skin.
*The rust remover may turn yellow, but there is no problem with the ingredients.

●Made by Takeuchi Kasei Co., Ltd.

CASTRO
Castro Fender was born in Spain in the early 1970s by founder Carlos Castro.
Castro is now one of the world's largest manufacturers of buoy fender floats.
Our products are sold in over 70 countries around the world and are widely praised for their outstanding quality and innovative design.

■Size: Diameter/Total length/Eye diameter
A-0HD: 200mm / 270mm / 25mm
A-1HD: 290mm / 370mm / 25mm

●It is a drop-shaped air fender.
●The rope attachment hole is thick and reinforced with ribs, making it extremely durable. ,
●Can also be used as a course buoy if installed upside down.
●You can easily inflate with an air compressor or air gun.

【please note】
*Air injection nozzle not included *Delivered with air removed *As this is an overseas product, specifications may change without notice.

[Product specifications]
■Material: Nylon ■Rope diameter: 1/2 (12.7mm)
■Length: 200ft (60m), 300ft (90m)

An easy-to-handle nylon triple rope with excellent abrasion resistance, strength, and flexibility.

Handrails (handrails, safety bars) that can be installed anywhere, including on boats.
Made of stainless steel (SUS304), it is rust resistant and highly durable.
The mounting flange is of the covered type, so it looks neat. The surface has a mirror finish.
To install, securely fasten in three places on each side with tapping screws, and click the covers on each side to complete.

[Product specifications]
■Material: Stainless steel (SUS 304) Mirror finish ■Accessories: Tapping screws x 6, PC plugs x 6

■For MIKUNI ■WSM products *Depending on the count, there may be no markings.
*Due to the material, there may be some discoloration that does not affect use. Please note.

006-9090 90
006-9095 95
006-9100 100
006-9102 102.5
006-9105 105
006-9107 107.5
006-9110 110
006-9112 112.5
006-9115 115
006-9117 117.5
006-9120 120
006-9125 125
006-9130 130

■SUPER BN main jet
■WSM products
*Depending on the number, there may be no stamping.
*Due to the material, there may be some discoloration that does not affect use. Please note.

■ Size: 165 x 160 x 104 cm
■ Capacity: 2 people
■ PVC tube
■ Heavy-duty nylon full cover type
■ Towable from 2 points (front and back)

• The product shipped is a safe and secure WOW genuine product.
• An inflatable towing tube pulled by a jet ski or boat.
  It's a classic deck-style tube with a backrest.
  It has two towing points, front and back, allowing for three different towing styles. 
  
  

  【Comes with a free JSPTOKAI original bag for convenient storage of gear!】
  

  A 56L large-capacity bag that can store up to 4 life jackets.
  The U-shaped zipper allows the top to open wide for storing marine gear.
  The bottom is made of mesh material, allowing water to drain.
  This bag will solve all your previous problems with carrying and storing your gear!
  (Size: 50x45x25cm / Fabric: Clear PVC Black Mesh)

NGK Spark Plugs for HONDA Outboards - DR (Heat Range) HS Series
【DR5HS Compatible Models】BF8A/BF8M, BF9.9A
【DR6HS Compatible Models】BF15A

●Sold Individually
*Image is for illustration purposes only.

[Compatible models] SEADOO 951-DI

●Sold in units of 1 piece *Image is for illustrative purposes only.

[Compatible models]
VXS/VXR/VX HO/FX HO(09-) limited engine recommended
FZS/FZR limited engine recommended
FX SHO limited engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.

●Series: CONCORD
●Pitch size: 14/23
●3 blades ●Applicable pump diameter: 155mm
●Material: Stainless steel ●Product contents: Impeller, impeller seal (SLA016), impeller wrench (WR014)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models]
Stock engine recommended for FZS/FZR (normal boat)
Stock engine recommended for FX SHO (normal boat)
VXS/VXR/VX HO/FX HO(09-) limited engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.

●Series: CONCORD
●Pitch size: 13/22
●3 blades ●Applicable pump diameter: 155mm
●Material: Stainless steel ●Product contents: Impeller, impeller seal (SLA016), impeller wrench (WR014)

[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models] YAMAHA
VXS/VXR/VX HO/FX HO(09-) stock engine recommended (normal boat)
FZS/FZR limited engine recommended
FX SHO limited engine recommended

*Limited: For boats that are replacing non-engine parts such as intake/exhaust or intake gate.

●Series: CONCORD
●Pitch size: 13/19
●3 blades ●Applicable pump diameter: 155mm
●Material: Stainless steel ●Product contents: Impeller, impeller seal (SLA016), impeller wrench (WR014)

●[Features of Concord Impeller]
This impeller has a leading edge with an innovative blade design that offers both acceleration and maneuverability unlike any other.

*In order to select the best pitch, please consider the conditions of the engine, etc.

[Compatible models] KAWASAKI ULTRA series
ULTRA310 (~'21)
ULTRA300X
ULTRA300LX
ULTRA LX ('12～)

*ULTRA250/260 is not compatible.

[Product Name] ULTRA310/300X Front Cowl FRONT COWL

■Black gel coat finish.

It is designed to be easily converted from normal food.
Since the normal inner is used as is, the normal storage box can also be used!
Compared to the normal hood (without innerwear) which weighs approximately 3.5kg, the weight can be reduced by approximately 20%.

※※This is an unpainted product, so please paint it in your favorite color before use. ※※

【Guidance】
*Made-to-order products (usually takes about 3 weeks) Please contact us for the approximate delivery date before placing your order.
*Please note that we cannot accept cancellations or returns.

[Compatible models] YAMAHA NEW SJ (2021) Super Jet

21 Year Handle Pole Spring for Yamaha Superjet A spring that is approximately 70% stronger than the genuine spring.
By installing it, the weight of the handle pole is reduced by 40%, reducing the burden.