Collection: trailer parts

●Sold individually for left and right (1 piece each)
(Please choose left or right from the perspective of the trailer.)

●Additional hooks for securing
●Plate required when installing retractable transom tie-downs.
●Hook compatible with advanced LED motion lamps.

It is sold cut into 1m lengths considering the maximum shipping size.
If you paste it on the bank of a trailer, you can load and unload jets, boats, etc. by sliding it.

[Same color/size] Length approx. 1m x width 45mm (top side 40)mm x 4 pieces

As this is an overseas manufactured product, color unevenness and texture may vary depending on arrival time and individual differences. Small scratches occur during the manufacturing and transportation process, and are not subject to product complaints.
Due to the shape of the product, it cannot be bundled with other products.
Up to 2 sets (8 pieces) of the same item can be shipped in one package.

●Sold separately for left and right (1 piece each) (Please choose left and right when looking from the rear of the trailer.)

●Additional fixing hook ●Mounting plate required for removing the retractable transom tie-down ●Hook compatible with advanced LED combination lamps

■Includes mounting bolts and nuts

The belt, which is wound inside the housing, can be extended to any desired length. Hook it onto the transom handle (eye) of the boat, and then use the ratchet to wind and secure it.
Unlike regular tie-down straps, there's no need to repeatedly attach and detach it from the trailer.
It is fixed to the rear of the trailer using mounting brackets.

●Material: Stainless steel (for metal parts)
●Contents: 1 set of 2 pieces
●Belt width: 48mm x length up to 900mm
●Load capacity: 3000LBS (1360kg) / 2 pieces

【Please note】
*Hooks shown in images are sold separately.
Mounting hardware is not included. Examples of other company's multi-hooks (SRX-143L, SRX-143R)

- Lamp size: 102 x 51 x 28mm

●Water resistant specifications

●Sold per unit

It has a ``water resistant'' design that can withstand water from above, such as rain and car washes.
Avoid submerging the light section in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

Long-selling "UNLIMITED Tie-Down Pad" redesigned

Key Features

• Iconic Color Variations
  Available in 3 colors: Black (BK), Khaki (KH), and Gray (GY).
  The simple design, which blends in with the outdoors, is accented with a luxurious UNLTD
  rubber logo patch.

• Newly Improved Velcro
  The adhesive strength has been enhanced, making it resistant to fraying even after repeated use.
  Durability has also been improved, allowing for peace of mind even with frequent use.

• High-Quality Material
  Made with thick 5mm neoprene material.
  Its robustness and excellent cushioning firmly protect your precious hull.

Product Specifications

• Colors: Black (BK), Khaki (KH), Gray (GY)
• Size:
  • When unfolded: Approximately 22cm × 19cm
  • When rolled: Approximately 22cm × 6.5cm
    *There may be an error of ±5mm due to sewing.

【Set Contents】
●NO.714256: Transom Tie-Down
●NO.ULT131BK-L x 2: Tie-Down Pad L size (250 x 290mm)

Secure to the rear of the trailer using mounting brackets.
The belt, rolled up inside the housing, can be extended to any desired length.
Hook it onto the boat's transom handle (eye) or similar point, then use the ratchet to tighten and secure it.
Unlike regular tie-down straps, there's no need to attach and detach it from the trailer every time.
【Mounting brackets (e.g., SRX-143L, SRX-143R)】

●Material: Stainless steel (metal parts)
●Set of 2
●Belt width: 48mm x length ~900mm
●Load capacity: 3000 LBS (1360kg)/2 pieces
*Hooks in the image are not included. (Image shows use with a third-party multi-hook)

Stainless Steel Tie-Down Belt Ratchet Type Automatic Retraction Trailer

●A convenient ratchet type tie-down belt that does not require cleaning up the belt.
●Transom tie-down made entirely of stainless steel, resistant to corrosion, and retractable with one push.
●Compact size allows you to securely fix PWC.
●The hook part is made of stainless steel coated with resin.

≪Set contents≫
[Product number: 0706-29 2 tie-down bodies] x1
[Product number: 0706-25 Mounting plate & U bolt set] x2

■Material:
Hook part: Stainless steel (resin coating)
Mounting hardware: stainless steel

■Tightening force: 300kg
■Breaking load: 600kg
■Belt length: 1m

● Wide Type: Uses LEDs with a wide illumination range.
● Mounting Hole Pitch: 50mm
● Sales Unit: One side (left/right distinction) *Please select left or right when viewing the trailer from the rear.

【Water-Resistant Specification】
Designed to withstand water from above, such as rain or car washes.
Please do not immerse the light unit in water, such as by backing the trailer into water. Water may enter the lamp and cause damage.

【Important】There are two types of combination lamps: "Wide" and "Narrow." Although they look similar, please note that their illumination ranges are different, and the shape of their connectors varies.
If you wish to confirm compatibility, please contact us beforehand via the inquiry form or provide your trailer model and chassis number when placing your order.

■ This is very convenient when you can't hook the tie-down belt or the belt doesn't reach, such as when transporting a jet ski loaded on a trailer.

■ You can make a loop and hook it anywhere.

■ Quantity: 2 pieces per set

■ Overall length: 50cm

■Helps prevent trailer couplers from falling off and being stolen.

■Can be installed on most types of trailer couplers.

[Product specifications]

■Material: Steel plated

■Pin diameter: 6.0mm

■Pin width: 17mm

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.
●Double stitch width is 30cm, approximately 3 times that of a standard strap. (See photo)

■Application: Winch strap
■Length: 6.0m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N410-45S large hook 4.5m,
*Product number: N420-45S small hook 4.5m,
*Product number: N420-60S small hook 6.0m is also available.

■It becomes a safety chain when the trailer comes off from the car when towing the trailer.

■Material: Steel plating

■Chain length (not including S hook): 1,170mm

■S hook length: 110mm

■Hook part thickness: 11mm

[In 2018, the white base has been changed to a black base. ]

■Size: Height 52 x Width 101 x Thickness 9mm
■Sold in units of 1 piece

★Water resistant specifications★
It is designed to withstand water from above, such as from rain or car washes.
Please be careful not to submerge the light part in water, such as by submerging the trailer.
Water may enter the lamp and cause it to break.

■Helps prevent the trailer coupler from falling off.

■Can be installed on most types of trailer couplers.

■Material: Steel

■Pin diameter: 7.0mm

■Pin length: 65mm

●Colors: 4
●Width: 50mm
●Strap Length: 5,000mm

The addition of a multi-strap feature to the hook reduces damage to the hull!
It also makes it easy to secure to PWCs, which are typically difficult to attach hooks to, improving functionality.

0306-12 Black
0306-13 Red
0306-14 Yellow
0306-15 Blue - Discontinued

Product name: Stainless Hook Winch Strap
Product number: SRX-149R Red
Product number: SRX-149B Blue
Product number: SRX-149Y Yellow
Product number: SRX-149K Black

High-quality winch strap with a durable stainless steel hook.
Available in four colors that stand out as accents: red, blue, yellow, and black.
Reliably sewn in Japan, the loop strap attached to the hook is a 40cm SOREX special specification, just like existing winch straps.

■Strap width: 50mm x Length: 6m
■Center pin included

●Sold in units of 1 piece.
●Round shape

Eliminates the inconvenience when moving a trailer, such as not having a place to hold it, or being in a low position and not being able to use force even if you attach a coupler grip!
Using the carry handle, you can easily move it like a wheelbarrow, and it can also be connected to a car easily.

It can be installed if the shape of the bow tower is 45 x 75 and there is an installation space of about 20 cm at the top.
Can be installed on SOREX bow stop kit [Product number: ST-090-02, ST-088-01] *SOREX trailer MB cannot be installed because the bow stop is special.

■Included: 2 sets of mounting bolts (size: Φ10x47x100mm) and nuts

●This is a specially processed strap with a winch hook weaved in to prevent belt breakage.
●Double stitch width is 30cm, approximately 3 times that of a standard strap. (See photo)

■Application: Winch strap
■Length: 6.0m
■Width: Approximately 5cm
■M8×70 bolts and nuts included

*Product number: N420-45S small hook 4.5m
*Product number: N410-45S large hook 4.5m
*Product number: N410-60S large hook 6.0m is also available.

■A set of trailer coupler lock key and ball mount lock key.

■The key is unique. (The key for the coupler lock and the key for the ball mount lock are different.)

[Coupler lock key]
■Helps prevent trailer couplers from falling off and being stolen.
■Material: Steel (chrome plated)
■Pin diameter: approx. 6.4mm
■Keys: 2 pieces

[Ball mount lock key]
■Helps prevent the ball mount from falling off and being stolen.
■Material: Steel
■Pin size: approx. Ф16mm x 70mm.
■Compatible with: TIGHTJAPAN, SUNTREX, SOREX, class 3
■Keys: 2 pieces

●Tight Japan MAX TRAILER 7-pole harness connector.
●The wiring is in a call shape, making it very easy to use.
■Material: Aluminum

◆For ZERO 500Z Avanzard◆
【Limited Model Special Specifications for Advanced LED Combination Lamps】
・Bronze color reflector for a sharper rear view
・Vivid red light bar
・Advanced sequential turn signal

●Wide type: Uses LEDs with a wide illumination range.
●Mounting hole pitch: 50mm
●Unit of sale: One side (left/right distinction) *Please select left or right when looking at the trailer from the rear.

【Water-resistant specifications】
Designed to withstand water from above, such as rain or car washing.
Please note that the lights should not be submerged in water, such as by putting the trailer into water. Water may penetrate the lamp and cause damage.

■Bolt size AxBxC: 80x63xφ10

■Material: Steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■M10 75x45 square pipe vertical bolt

■Bolt size AxBxC: 100x60xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■Size: 75x80mm (length x width)

The one-shaft slide lever reduces the frustration of not getting caught, which is common with two-shaft types. The 8” spoke wheels give it a cool look.

■Maximum load: 680kg/1500LBS
■Mounting frame: up to 76.2 x 127mm
■Stroke: Approx. 250mm
■Material: Steel
■Tire: Made of resin

[Staff comment]
The biggest feature of this jack is that it uses a "one shaft slide lever".
Most conventional jacks have two shafts, so they have a large clearance to fit two shafts into the holes at the same time, which tends to cause rattling.
As you use it, the shaft may not engage properly and may become wobbly.
The number of shafts is reduced from two to one, resulting in less rattling and clearance and superior durability.

The casters use spoke wheels and have a high quality and stylish finish.
The caster housing bracket is of the highest quality and durability, avoiding the use of cheap welding and using three-dimensional bending to strengthen its weight resistance.

【Dimensions】
■When rolled: 90 x 290mm
■When unrolled: 250 x 290mm

Protects the hull of your beloved boat from scratches caused by ratchets and belts.
This large type can easily accommodate large, reinforced ratchets.
Made of the same material as wetsuits, it is soft, stretchable, and fits snugly to cover the hull.
It's convenient because it can be attached after the belt is set on the cargo.
Compared to types that must be threaded through the belt beforehand, this is significantly easier to use and highly recommended.

■Quantity: Set of 2
■Material (main body): Chloroprene
■Mounting method: Velcro specifications

【Disclaimer】
Due to the patterned design, the pattern design, color, and logo size will vary for each product.
Please note that we cannot accept exchanges or returns except for product defects.

Pad Trailer Parts Trailer Ratchet Strap Wetsuit Fabric

【Size】
■When rolled: 90 x 290mm
■When unrolled: 250 x 290mm

Protects your boat's hull from scratches caused by ratchets and straps.
This large type easily accommodates even large, heavy-duty ratchets.
Made from the same material as a wetsuit, it is soft, stretchy, and fits snugly to cover the hull.
It's convenient because it can be attached after the strap is set on the cargo.
Compared to types that must be threaded onto the strap beforehand, this type is significantly easier to use and highly recommended.

■Quantity: 2 pieces per set
■Material (main body): Chloroprene
■Attachment method: Velcro closure

※Standard size 【ULT131-M】 has a white logo
※Large size【ULT131-L】 has a red logo

Trailer parts Boat trailer Lashing strap ULT131BK

Trailer frame 85mm width compatible
*Displayed size may vary depending on individual items.
*If there is any wobble even after tightening sufficiently, please prepare a separate spacer.

●Made of stainless steel with the highest durability and corrosion resistance.
●Stainless steel polished mirror finish emphasizes stylishness.

[Product specifications]
■Ball diameter: 2 inch compatible
■Mounting frame width: 85mm compatible
■Mounting hole spacing: approx. 77mm
■Maximum towing weight: 1,588kg
■Material: Stainless steel mirror finish

*Part number 207421 coupler lock can be used.
*There is also a product compatible with 50mm trailer frame. [Product number TC-01SUSP]

■Sales unit: 1 pc per side (2 pcs required for left/right replacement), left/right common shape
■Accessories: None
Stylish design with steps front and back for easy maintenance!

[Requests and Notes When Ordering]
*Please provide the following trailer information when ordering: (Model, Year, Chassis Number)
*This information will be used to confirm compatibility with the manufacturer when arranging the product.
*For details, please refer to the image "Requests When Ordering."

[Delivery Information]
●Cannot be bundled... To prevent damage, only shipped individually. "Combined packing (bundling)" with other products is not possible.
●Direct shipping product... As this product is shipped directly from the manufacturer, "cash on delivery" and "combined packing (bundling)" are not possible.
●Limited payment methods... Bank transfer or credit card only (no cash on delivery).
●Shipping will be calculated per unit [shipping cost x quantity].

●Dust cover only
●Prevents dirt, mud, etc. from entering the bearing protector.

●Sold in units of one.

■It becomes a safety cable when the trailer comes off from the car when towing the trailer.

■The hook has a metal fitting (stopper) to prevent it from coming off, making it a safe design.

■Specifications: Vinyl coating

■Length: 600mm (excluding hook)

■Hook part thickness: 12mm

■Wire thickness: 8mm

■Maximum load capacity: up to 2,268kg

■1 set of 2 pieces

■M10 75x45 square long bolt for pipe

■Bolt size AxBxC: 150x63xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

■M10 75x45 square pipe horizontal bolt

■Bolt size AxBxC: 70x97xφ10

■Material: Stainless steel

[Kit contents]
U bolt x1

Nylon lock nuts x2

Washer x2

●A mounting plate required when installing a retractable transom tie-down on a MAX trailer.

*Two stainless steel mounting plates (product number: 0706-25) are required for each trailer.

■Material: Plate and U bolt both made of stainless steel

■Specifications: Vinyl coating
■Length: 600mm (excluding hook)
■Hook part thickness: 10-11mm
■Hook length: 110mm
■Wire thickness: 8φ

Helps prevent the trailer coupler from falling off.

■Material: Stainless steel
■Pin diameter: 6.0mm
■With strap

●This is a connector holder made by Tight Japan.
●Holder with optimal angle for quick storage of connectors
A convenient holder with a hook for hanging a safety wire.

■Material: Stainless steel

●Foldable type.

■Wheel size: 6 inches (15.2cm)
■Mounting frame: up to x mm
■Material:
■Maximum load: 453kg
■Stroke: mm

Product name: Wiring socket (single item)
Product number: SRX-007

This is a single wiring socket for the towing vehicle side lights.
*Wires and relay connectors are not included.

Convenient for moving trailers.

Product name: Coupler handle Product number: SRX-030

One M12 bolt included

*For installation on trailers with inertia brakes,
A separate handle mounting bracket is required.

Bow stop extension kit compatible with SOREX ZERO series.
( 500B / 500BEE / 500BXE / 500B BUE / 500B BAE / 500S / 500SXE / 500ZA / 550B / 550S )

If you feel that the center of gravity of the trailer and hull is too far forward for Kawasaki ULTRA series, STX series, YAMAHA FX-HO series, FX-SHO series, or FX-SVHO series,
this kit allows you to shift the hull's center of gravity backward.

■Compatible with: SOREX ZERO trailers
■Contents: Main unit, mounting parts (see images for details)
*This product does not include a winch, strap, bow roller, or mounting bolts.

SOREX ZERO trailer sticker
■Size: 1000x50mm
■Sold in units of 1 piece

STKS15-ZERO17-B Black 1 piece
STKS15-ZERO17-W White 1 piece

SOREX trailer sticker
■Size: 510×51mm
■Color selection, sold in units of one piece

STK001-BLA
STK001-REA

■1 point
■Please choose the size you need from 4 different heights.
ST-026-05: 190mm
ST-026-01: 230mm
ST-026-07: 245mm
ST-026-03: 270mm

[Ordered products]

●The tail lamp is larger and has a more impressive finish.

●In addition, the high-intensity fiber-type small lamp improves night visibility.

●The turn signal unit is equipped as standard with sequential turn signals that can express a sense of great movement from side to side.

●It is designed to work in conjunction with the turn signal of the towing vehicle, and the turn signal on the trailer side flows in a chain type.

■Size: Height 160x Width 390x Thickness 135mm

Bumper for smoothing bumper cover.

■Material: Steel

●Sold as one side (separate left and right shapes)

0818-10 Left side
0818-11 Right side