Collection: trailer parts

With this coupler grip, you can securely grip the tip of the trailer.
Even heavy trailers can be lifted without using a jack and can be easily attached to and detached from the hitch.
The arm part is made of stainless steel and is resistant to rust, and the grip part is made of rubber for easy grip.

■Mountable bolt pitch: approx. 74-79mm
(Mounting hole center - center size: approx. 75mm)
■Bolt diameter: Approximately 8-13mm

【please note】
Only the coupler handle and other items are not included.
Mounting bolts are not included.

●A22mm B34mm C89mm D44mm E17mm
●Small roller attached to the end of the bow keel
●Made of hard rubber

●Attach to the tip of the hitch coupler to protect the towed vehicle from scratches.
● To install, just clip it onto the edge of the coupler.
●Made of rubber
●Coupler is not included.

■Size: Total length 180mm x 80mm
■Shaft diameter: Ф16.0mm

■Size: Total length 285mm x Ф80mm
■Shaft diameter: 16.0mm

●Loop strap for Dutton PWC.
●Winch belt with small hook.
- Comes with a loop strap that is convenient for fixing the PWC without damaging it.

[size]
■Strap width: approx. 5cm, length: approx. 3.6m, stitch width: approx. 9.5cm
■Loop part: approx. 2.54cm, length: approx. 1.22m

This is a ``cushion pad'' that is placed on the platform of a trailer to improve the slippage of the boat.
It is a material that is resistant to corrosion and water, and does not wear out easily even when loaded with heavy ships.

【size】
Width: 20cm
Total length: 365cm

[Installation method]
Paste it with rubber adhesive and secure it firmly with a tacker (a large version of a stapler).

[Product size]
■Total length (A): 337.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 295.0mm
*Accessories: End cap

[Product size]
■Total length (A): 283.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 245.0mm
*Accessories: End cap

[Product size]
■Total length (A): 235.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 194.0mm
*Accessories: End cap

[Product size]
■Total length (A): 136.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 99.0mm
*Accessories: End cap

■Slide width (A): 126.0mm
■Inner width (B): 306.0mm
■Depth (C): 163.0mm

■Slide width (A): 126.0mm
■Inner width (B): 255.0mm
■Depth (C): 163.0mm

■Slide width (A): 126.0mm
■Inner width (B): 206.0mm
■Depth (C): 163.0mm

■Slide width (A): 127.0mm
■Inner width (B): 128.0mm
■Depth (C): 103.0mm

This is the bracket required to secure the keel roller and attach it to the trailer.

■Slide width (A): 65.0mm
■Inner width (B): 112.0mm
■Depth (C): 103.0mm

■Roller diameter (A): 89.0mm
■Width (B): 194.0mm
■Shaft diameter (C): 16.0mm

●By attaching it to a trailer, you can easily lift and lower the vessel.
●Uses a urethane agent that is resistant to deterioration and hardening caused by salt and UV rays, and is smooth and resistant to scratches on the boat.

[Product size]
●Roller diameter 80mm
●Total length 93mm
●Center shaft diameter 12.5mm

●By attaching it to a trailer, you can easily lift and lower the vessel.
●Uses a urethane agent that is resistant to deterioration and hardening caused by salt and UV rays, and is smooth and resistant to scratches on the boat.

[Product size]
●Roller diameter 77mm
●Total length 69mm
●Center shaft diameter 12.5mm

Total length 180mm x width 75mm x shaft length 100mm.

●Can be fixed by pulling the pin and rotating it 90 degrees.

■Handle rotation diameter: 20cm
■Mounting frame: up to 76.2 x 127mm
■Material: Steel
■Maximum load: 543kg/1200LBS
■Stroke: 250mm
■Wheel diameter: 6" / 152.4mm

With this coupler grip, you can securely hold the front end of your trailer.
Even with a heavy trailer, you can lift it without using a jack, making it easy to attach and detach from the hitch.

■Material: Steel plated

[Please note]Only the coupler handle is included.
　The coupler, mounting bolts, etc. used for shooting are not included.

■Roller diameter (A): 89.0mm
■Width (B): 295.0mm
■Shaft diameter (C): 16.0mm

■Roller diameter (A): 75.6mm
■Width (B): 99.0mm
■Shaft diameter (C): 16.0mm

-Size: width 165 x height 100 x (base 76 x 76mm)
●Good because it's made of rubber so it won't scratch the hull!

■Mounting frame: up to 76.2 x 127mm
■Material: Steel/galvanized
■Maximum load: 680kg / 1500LBS
■Stroke: 300mm
■Wheel diameter: 6" double / 152.4mm

It minimizes the burden and makes attachment and detachment easy.

■Material: Chrome-plated steel

【Note】This is for the coupler handle only.
　The coupler and mounting bolts used for shooting are not included.

●Made by Fulton, a leading American trailer parts manufacturer.

■Maximum towing load: 580kg. 1300LBS.
■Drum winding capacity: Supports strap lengths up to 20FT (approximately 6,096mm)
■With 2-way ratchet lock
■Handle length 22cm
■Material: Main body made of steel

*Cannot be used for vertical movement.
*Strap is sold separately.

●Made by Fulton, a leading American trailer parts manufacturer.

■Maximum towing load: 400kg. 900LBS.
■Drum winding capacity: Supports strap lengths up to 15FT (approximately 4,572mm)
■Handle length 20cm
■Material: Main body made of steel

*Cannot be used for vertical movement.
*Strap is sold separately.

●Two-way ratchet lock with plastic cover.

●Material:
[Body] Steel
[Cover] Plastic
●Maximum towing load: 680kg
●Handle length: 23Cm
●Strap size: Width 2" (approx. 5.08cm) 20FT (approx. 609.6cm)

■Length adjustable from 61 to 91cm

●Supports the outboard motor when towing a trailer, reducing the burden on the transom.

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products.
・Up to 2 items can be sent together

[Product size]
■Total length (A): 159.0mm
■Shaft diameter (B): 16.0mm
■Recommended roller width (C): 127.0mm
*Accessories: End cap

■Roller diameter (A): 75.6mm
■Width (B): 127.0mm
■Shaft diameter (C): 16.0mm

●It is even safer to hang a wire chain to prevent theft when storing the trailer.
●Hitch ball diameter: Compatible with 1 7/8", 2", 2 5/16".
●Equipped with a slide cover that protects the keyhole from dust.

【please note】
It may not be possible to use the trailer coupler with a ball shape that is different from the listed product. Thank you for your understanding.

●One set of mounting brackets (2 pieces) is required to install one rail.
Size: Height 20cm x Width 7cm

The 4FT rail has 5 rollers, allowing you to smoothly load and unload the boat.

●Size:
Total length 1,220mm
Width 70mm
Roller diameter: 63mm

●Loading weight: 543kg

*One set of separately sold "26450 mounting bracket (2 pieces)" is required to install one rail.