Collection: Sliding rail/rear ladder

It is sold cut into 1m lengths considering the maximum shipping size.
If you paste it on the bank of a trailer, you can load and unload jets, boats, etc. by sliding it.

[Same color/size] Length approx. 1m x width 45mm (top side 40)mm x 4 pieces

As this is an overseas manufactured product, color unevenness and texture may vary depending on arrival time and individual differences. Small scratches occur during the manufacturing and transportation process, and are not subject to product complaints.
Due to the shape of the product, it cannot be bundled with other products.
Up to 2 sets (8 pieces) of the same item can be shipped in one package.

When attached to the bank of a trailer, it can be easily slid to load and unload jets and boats.

■Material: Polyethylene ■Total length: 13300mm
■Full width: 29mm

■Set contents Blue rail 133cm x 4 pieces

[Notes about the product]
●As this is an overseas manufactured product, the color and texture may differ depending on the time of arrival and the individual product.
●Please note that small scratches occur during the manufacturing process and are not eligible for return or exchange.

You can easily load and unload your jet ski without submerging the essential parts of the trailer, such as the axle and electrical components, in water.The newly designed mounting section for Lopros uses resin parts, improving operability during sliding and enabling a wider range of customization combinations due to its lighter and more compact design.

The rear section of the rear ladder, once stowed, is secured with pins for safety.

■For light vehicles/Lopros (common)
■Made of steel
■Max Trailer exclusive design
■The current rail color is "black."

【Please note】
■Cannot be installed on two-boat trailers or regular vehicles.
■Adjustments may be necessary for wood rail specifications.

【Shipping Information】
・Due to the shape of the product, it cannot be combined with other items.
・Direct from manufacturer, so no cash on delivery.
・Shipping cost is per item.

[Kit Contents] SOREX-specific steel bunk x 2, mounting bracket x 4
*Drilling is required for installation.

[Requests and Precautions When Ordering]
*Please provide the following trailer information when ordering: (Model, Year, Chassis Number)
*This information will be used to confirm compatibility with the manufacturer when arranging the product.
*For details, please refer to the image "Requests When Ordering."

[Shipping Information]
●Cannot be combined with other items...To prevent scratches and damage, this item will be shipped individually. Cannot be "bundled (combined)" with other items.
●Directly shipped product...This product is shipped directly from the manufacturer, so "cash on delivery" and "bundled (combined) shipping" are not available.
●Limited payment methods...Bank transfer or credit card only (cash on delivery not available)
●Shipping will be calculated per item: [Shipping Cost x Quantity].

Steel retractable slide ramp
When not in use, it can be easily stored inside the bank.
Enables loading and unloading of PWC with minimal submersion of the trailer in water.
This reduces corrosion of trailer taillights and other components, as well as damage to undercarriage parts such as hubs.

■Rail height 2,200mm, width 410mm
■Maximum load 500kg
*May not be installable on some vehicle models.

[Delivery Information]
・Due to the shape of the product, it cannot be combined with other products.
・As this is a manufacturer-direct product, cash on delivery is not accepted.
・Shipping costs are per item.

Compatible with trailer slope rails, rail width 350 mm (center to center of rail)

By installing trailer slope rails, the JET can be loaded more smoothly, and the taillights, housing, etc. do not get submerged in water, so the trailer can be used for a long time.
It is possible.
Installation is easy, just attach the rail guide (included) to the trailer body.

● By installing a trailer slope rail, you can smoothly record the raising of the boat. Since the taillights, axle parts, etc. do not get submerged in water, the trailer will last longer.
● Since it is a 50x50 square pipe, there is no need to worry about the load when pulling it up with a winch.
(When pulling up, please support with 2-3 people. Forcibly pulling it up with only a winch may damage the winch.)
● When not in use, it can be easily stored inside the trailer and PWC body.
(Please note that it may not be possible to store it depending on the boat or trailer, and depending on the boat, the bottom may hit the rail guide part when loading it.)
A safe stainless steel round pipe is used for the handle part.
● The trailer side processing is simply attaching the rail guide to the rear frame of the trailer with U-bolts. )
* If the frame on the hub trailer side is low, the rear end of the slope rail will be close to the floor, which is dangerous, so please check.

Q. Can the "rail guide part" fit between the trailer's bunk rails and be attached to the rear frame? The size of the rail guide part is
420 mm wide.
In particular, if the rear end frame has a very deep R shape, the U-bolt may not fit. In such cases, if you prepare a larger U-bolt or similar, it will be possible.
* If it is attached to a frame with an R shape, the bottom of the boat may hit the rail guide part, so
please raise the bunk rail to adjust it. * If there is a license plate etc. at the attachment part, it is necessary to move the plate etc. (outside public roads)
* Depending on the compatibility between the boat and the trailer, the rail may not be able to be stored.
After installation, a space of approximately 85mm (height) x 71mm (width) is required for the rail to pass through.

[About payment and packaging]
For manufacturer-direct products
● Only handling fee (transfer bank). (Cash on delivery not accepted)
● Cannot be bundled

[About delivery]
If the recipient of this product is a private residence, an additional fee may be required for the billing amount.

Due to the large size of the item, the following "area shipping fee" will be charged separately.

[Product specifications]
■For small cars only ■Sales unit: 1 piece ■Total length: 2000mm
■Accessories: Mounting bolts

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping charges are for each item.

[Product specifications]
■Sold in units of one.
■Total length: 2000mm
■Mounting hole pitch: 1500mm
■Accessories: Mounting bolts

[Information regarding delivery]
-Due to the shape of the product, it cannot be bundled with other products.
・Cash on delivery is not possible as this item is shipped directly from the manufacturer.
・Shipping charges are for each item.

Due to the large size of the item, shipping charges will be incurred.

[Product specifications]

■Sold in units of one.
■Total length: 1830mm
■Mounting hole pitch: 1290mm
■Accessories: Mounting bolts

[Information regarding delivery]
・Due to the shape of the product, it cannot be bundled with other products. ・Cash on delivery is not possible as it is shipped directly from the manufacturer. ・Shipping charges are for each item.
*Due to large items, shipping charges will be incurred.

[Product Specifications]

■Sold in units of one bottle.
■ Total length: 2000mm
■ Mounting hole pitch: 1500mm
■Accessories: Mounting bolts

[Disclaimer]
The color of the color rail may change depending on the arrival time.

[Shipping Information]
・Due to the shape of the product, it cannot be bundled with other products. ・As this is a product shipped directly from the manufacturer, cash on delivery is not available.

【Product Specifications】
■Sold individually.
■Overall Length: 1830mm
■Mounting Hole Pitch: 1290mm
■Accessories: Mounting bolts

【Delivery Information】
・Due to the shape of the product, it cannot be combined with other items.
・As this is a direct shipment from the manufacturer, cash on delivery is not available.
・Up to 2 units can be shipped together.