Collection: Body Parts: Hull Fittings

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

*A rod holder that can be attached to the optional LINQ COOLER 51L (#269800817).

GLOVE BOX LATCH

SEA-DOO OEM Part Number: 264000133, etc.

●Glove box latch for SEA-DOO

●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

※The installation location is number 1510 in the 3rd photo.

- Enhances the whistle from the supercharger at idle, creating a nice hiss when you lightly crack the throttle and a supersonic charger noise when you back off the throttle at full boost.

- Can be installed in 5 minutes and includes a block-off cap for the air box and a low-profile hose clamp for attaching the vent hose.
・Instructions are also included

*The last few pictures are just to show how it will fit into the vent, the real vent is not included.

One of each of the four carefully selected designs is packaged in an original EVA case.

■Kit contents 85mm/120mm/145mm/170mm total 4 pieces

[Adaptation] KAWASAKI Kawasaki

[Quantity] 1 piece

By replacing it with the genuine hull drain plug, you will be able to drain water inside the ship while planing.
The ball inside the product moves due to the inertia of the ship's hull, and during acceleration and deceleration, water pressure moves the internal ball to prevent water from entering the ship.

[Caution] *Please do not stop the vessel for long periods of time. (Drainage does not occur while anchored because there is no inertia)

[KAWASAKI]
UL46009RD
UL46009SL
UL46009GR
UL46009BK

[Compatibility]
GTR230 (2020 and later) / GTI130 (2020 and later)

[Compatibility]
RXT-X300,GTX-L300,WAKE Pro 230,GTX170/155 (2018 or later)

●Weather resistance that resists deformation, discoloration, deterioration, etc.

●Capacity: 4.2 gallons (16L)

●Roto mold cooler box with excellent rigidity and durability

●High cold retention performance with high quality insulation foam

●Equipped with seawater LinQ hardware as standard

【Compatibility】2022 and later Yamaha FX models
2022 and later FX models (with genuine speakers): Plug-in installation only
2022 and later FX models (without genuine speakers): Can be installed in conjunction with the Audio Upgrade Installation Kit (F5G-U81AC-V0-00)

Designed for those who seek even higher quality sound than the genuine sound, this system delivers world-class treble, midrange, and bass performance.
Installation is quick and easy into Yamaha's speaker pods, with only plug-in connections and minimal modifications required, allowing for seamless integration with your Yamaha.

Premium sound quality: 8-inch marine-grade coaxial speakers and 1-inch dome tweeters provide astonishing full-range sound quality.

Designed to deliver powerful, clean sound in open-air marine environments, it is also salt-water resistant and engineered with corrosion and UV resistant materials.

[Compatible models] SEA-DOO SPARK

[Quantity] 25 pieces
[Material] Stainless steel
[Size] 4mm

The genuine washer (291003880) used on the body of SEA-DOO SPARK is made of plastic and may break depending on the number of times it is used, so we recommend replacing it with this kit during maintenance.

Two pieces of this kit are required to replace the washer on a SPARK 1 boat.
★Total number used: Front body x 8, rear body x 16, center body x 21 (2) = 47 in total

More affordable than OEM parts!

■Unit of sale: 1 pc.
SEA-DOO End Fitting
*Equivalent to OEM Part No. 269501717

PUSH BUTTON RED

SEA-DOO genuine part number (OEM): 277002327 etc.

●Stop/start button for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The location used is number 190 in the second photo.

GLOVE BOX LATCH

SEA-DOO genuine part number (OEM): 264000133 etc.

●Glove box latch for SEA-DOO

●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

*The location used is number 1510 in the third photo.

[Adaptation] YAMAHA Yamaha

[Quantity] 1 piece

By replacing it with the genuine hull drain plug, you will be able to drain water inside the ship while planing.
The ball inside the product moves due to the inertia of the ship's hull, and during acceleration and deceleration, water pressure moves the internal ball to prevent water from entering the ship.

[Caution] *Please do not stop the vessel for long periods of time. (Drainage does not occur while anchored because there is no inertia)

[YAMAHA]
UL46010BK
UL46010SL
UL46010RD

[Compatible models]
KAWASAKI ULTRA series / STX160 series
SEA-DOO All models

[Material] Stainless steel polished
【size】
Mounting hole pitch: Approx. 41mm Thread part: M8x27mm
Hook part: Width 92mm x 43mm x 21mm
Weight: 142g

Luxurious stainless steel buff mirror finish!
Same shape as the hook (hook, towing: genuine product number [27012-3860]) used in ULTRA250/260.

The rear hook of 300X and later has been changed to a simplified and simple part.
Since it has a cleat shape, it is a convenient hook when mooring a boat.
A masterpiece with polished details that are not polished with genuine hooks.

【Compatible Models】SEA-DOO ST3 Hull
※RXT-X 325/300 , GTX-L 325/300 , GTX 230/170 , Wake Pro 170 ’18 and later

【Quantity】1 set of 10 parts
【Material】Stainless steel
【Thickness】1.5mm

Washers used for the seat base engine cover of the SEA-DOO ST3 Hull series.
Perfect for preventing biting when tightening the genuine engine cover and as an accent part!

Applicable Models: Kawasaki ULTRA310LX/310LX-S

By using the tie-down kit,
large items such as cooler boxes and fuel cans can be easily secured.

■Approx. 40kg load capacity (88lbs load capacity)

【Note】
*Securing items such as lashing straps are not included.
*This product is not intended for towing, so please do not use it for that purpose.

【Please read before ordering】
This product is a **manufacturer-ordered item (genuine part)**.
Once your order is confirmed, we will promptly place the order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience cannot be accepted in principle.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery date as soon as it is confirmed.
Please place your order after acknowledging these conditions.

LATCH ASS Y

SEA-DOO genuine part number (OEM): 269700116 etc.

●Latch assembly for SEA-DOO

- Repair and replacement parts cheaper than genuine products

*The location used is number 40 in the second photo.

●Genuine parts (OEM) part number: 292002022

●This is an inexpensive aftermarket repair part with performance equivalent to genuine parts.

【Compatibility】2022 and newer YAMAHA FX models (models without factory-installed speakers)

・Harness and switch set required to install the RIVA Wet Sounds Audio System YAMAHA FX (22-)
・Includes the necessary wiring harness, genuine audio control pad, and detailed installation instructions for using the RIVA/Wet Sounds FX audio system (RY11170-AS) on 2022 and newer FX models without factory-installed audio.

【Please note】
※Genuine microphone accessory (F5G-U827A-00-00) is not included.
※The RIVA/Wet Sounds FX audio system (RY11170-AS) is sold separately.

[Compatibility]
GTR230 (2020 and later) / GTI130 (2020 and later)

【Compatible models】All SEA DOO models
【Material】Polished stainless steel

【Size】
・Mounting hole pitch: Approx. 44mm
・Screw part: M8 x 24mm
・Hook part: 136 x 87 x 40mm (width x height x depth)
・Weight: Approx. 345g

Luxurious mirror-finished stainless steel!
Replacing the cheap genuine hook with this one will definitely enhance the visual appeal!

[Compatible models] KAWASAKI
STX160 series
ULTRA series
STX series

[Material] Stainless steel polished

【size】
Mounting hole pitch: Approx. 44mm Thread part: M8x28mm
Hook part: Width 136mm x 34mm x 48mm
Weight: Approx. 351g

Luxurious stainless steel buff mirror finish!
The visuals will be upgraded by replacing the cheap genuine hooks with polished ones!

[Compatible models] SEA-DOO
GTX-4TEC / RXT / RXT-X(-08)

Luxurious stainless steel buffed mirror finish.
Upgrade your visuals by replacing the cheap genuine hook with a polished one!

[Compatible models]
■Kawasaki: 750SX / SXi / SXi-Pro / 800X-2 / SX-R series (800SX-R / 1500SX-R)
■YAMAHA: 700FX / 700SJ

[About processing]
[1] When installing on a YAMAHA boat...If using a genuine YAMAHA lock: Machining of the lock part is required. A genuine KAWASAKI lock was purchased separately, and a genuine part lock assembly [27016-3703] was prepared and assembled.
[2] Use on KAWASAKI boats: Disassemble the genuine lock and assemble it to the product.

[Material] Stainless steel buffed finish

Excellent strength! Will not rust!
Replacing the original one will give the hull a luxurious feel and accent, making it more stylish.
The long hook design helps to securely lock the hood and prevent it from coming off.
The hook part can also be used with YAMAHA locks (processing required for installation)

[Note] Only the latch, internal parts of the lock part are not included.

Drain Plug

●OEM Part Number: 292002022

●This is an aftermarket replacement part that offers performance equivalent to OEM parts at a lower cost.

【Compatible Models】
YAMAHA FZR FZS

●Mirrorless design creates a stylish and racy look.

[Product specifications]
■Type: White
■Material: Plastic
■Flange diameter: 55mm
■Maximum thickness when inserting flange: 31mm
■Total length: 65mm
■Compatible with hose inner diameter 28.5mm

●This is a through hole for discharging the bilge pump overboard.
●Made of plastic
*Sold as one Suruhal Straight. Hoses etc. are not included.

[Product specifications]
■Type: White
■Material: Plastic
■Flange diameter: 39mm
■Maximum thickness when inserting flange: 23mm
■Effective length of hose insertion part: 30mm
■Compatible with hose inner diameter 19mm

●This is a through hole for discharging the bilge pump overboard.
●Made of plastic
*Sold as one Suruhal L-type elbow. Hoses etc. are not included.

[Product specifications]
■Type: White
■Material: Plastic
■Flange diameter: 49mm
■Maximum thickness when inserting flange: 35mm
■Total length: 83mm
■Compatible with hose inner diameter 19mm

●This is a through hole for discharging the bilge pump overboard.
●Made of plastic

*Sold as one Suruhal Straight. Hoses etc. are not included.

【Compatible models】
SEA-DOO
RXT-X300 (2018~)
GTR230 (2020)

●Bolt-on, no drilling or other processing required.

●This is a spring-loaded reboarding step that improves usability for recreation and is convenient for reboarding from the water.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
Due to immediate ordering from the manufacturer after your order is confirmed, cancellations or changes to order contents due to customer convenience will not be accepted in principle.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging the above.

【Compatibility】
GTR230 (2020 onwards) / GTI130 (2020 onwards)

【Please read before ordering】
This product is a **manufacturer's取り寄せ商品 (genuine part)**.
Once your order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience cannot be accepted in principle.
Furthermore, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
We kindly ask for your understanding before placing your order.

[Compatibility] SEADOO RXT, RXT-X, GTX, and WAKE Pro (2018)

Upgrade hardware kit essential for using the LinQ TUNNEL BAG (Part No.: 860201740) in saltwater.
LinQ hardware kit includes highly corrosion-resistant stainless steel parts.
Easy and quick installation.

*Standard equipment for LinQ Cooler boxes.

[Please read before ordering]
This product is a **manufacturer-ordered product (genuine part)**.
Once an order is confirmed, it is immediately placed with the manufacturer; therefore, cancellations or changes to the order are generally not accepted.
Additionally, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Thank you for your understanding and cooperation when placing your order.

【Please read before ordering】
This product is a **manufacturer's ordered item (genuine part)**.
Once an order is confirmed, we promptly place an order with the manufacturer. Therefore, cancellations or changes to your order due to customer convenience are generally not accepted.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging the above.

[Compatibility] SEA-DOO RXT, RXT-X, GTX and WAKE Pro (2018)

■2 pieces/set
※This is for one side. If you need 4 places (left and right), you will need 2 sets.

This is a necessary part for installing SEA-DOO genuine fenders (Part No.: 295100418).
Snap-In Fenders Installation Kit

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine parts)**.
Once an order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to order details due to customer convenience will not be accepted in principle.
Also, depending on the manufacturer's stock status, it may take some time for delivery. We will inform you of the delivery date as soon as it is confirmed.
Please place your order after acknowledging this in advance.

【Compatibility】
RXT-X300, GTX-L300, WAKE Pro 230, GTX170/155 (2018 and later)

●Use this product for FISH PRO / GTX models without audio from 2018 onwards, or when the audio system is damaged.

【Please check before ordering】
This product is a **manufacturer-ordered product (genuine part)**.
Once your order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to your order are generally not accepted.
In addition, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this.

【Compatibility】
RXT-X300, GTX-L300, WAKE Pro 230, GTX170/155 (2018 and up)

●Convenient for charging mobile phones, wearable cameras, etc.

●This excellent device detects the current required for proper charging time, preventing overcharging of equipment.

●Standard equipment on 2018 - GTX Limited300 models.

【Please read before ordering】
This product is a **manufacturer-ordered product (genuine parts)**.
Once an order is confirmed, we will promptly place an order with the manufacturer. Therefore, cancellations or changes to order details due to customer convenience are generally not accepted.
In addition, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging this.