Collection: steering parts

[Compatible] Can be installed on runabout models

[Included] UL31100 bar pad included (pad length 230mm) *Color cannot be specified

【specification】
■Material: Aluminum ■Type: φ7/8" (22.4mm) standard ■Total length: 850mm
■Handlebar clamp area: 130mm
■Grip end position: 65mm

Minimize clamping area, grip, switch case,
Handlebar with maximum throttle lever aria.
Bending tie compatible with recent models.
The shape that hangs toward the bar end creates a riding form that naturally closes the sides when cornering.

【Compatibility】Can be installed on runabout models. 【Type】Standard 22.4mm handlebar diameter 【Included】Comes with a handlebar pad (pad length: 220mm)

●The wide handlebars provide a natural and aggressive riding experience. ●Due to the wide handlebars, it is easy to adjust (cut) the handlebars to your desired length. ●The racing handlebar, made from aircraft-grade material, is coated with carbon fiber, creating a Spartan yet stylish look. ●The angle and length are based on conventional racing bars, but with scales printed to accurately set the mounting position, which is convenient for setup. ●This is the world's first innovative handlebar exclusively for watercraft, with absolutely no SWEEP (pullback). It is used and recommended by top riders worldwide. Its feature is that it eliminates interference between the handlebar and your side during low-center-of-gravity cornering, allowing you to maintain a more forward-leaning posture.

[Compatible with] Standard bar 22.4mm diameter

[Material] Made of aluminum

Clamp for attaching handlebars.
Since the mounting part is flat, it can be used with genuine mounts and UNLIMITED mounts.
When used with Kawasaki genuine handlebar mount, the handlebar will be raised approximately 24mm.

[Compatible models]
KAWASAKI STX160LX

Amplifier stay required when replacing the handlebar mount of STX160LX.
The JETSOUND audio system installed on the STX160LX can be fixed without impairing the operability of the audio amplifier when replacing the steering mount.
This is a stainless steel stay that is compatible with each of the company's steering wheel mounts.

[Compatible mount]
■Product number UL35300 Shockless mount system
■Product number UL35003-ULD ULTRA low down mount kit

【Compatible models】KAWASAKI ULTRA310LX (-'21) (※For use with UNLIMITED adjustable handle mounts [UL35003], [UL35003-ULD], and UL35007 head plate)

A plate for relocating the jet sound amplifier unit equipped on the ULTRA310LX (-'21).
This allows for the replacement of the handle mount.

■Quantity: 1
■Material: Stainless steel

[Compatible models] KAWASAKI ULTRA310LX (-'21) *
*For the company's UL35300 shockless handle mount

A plate to relocate the jet sound amplifier unit installed on ULTRA310LX (-'21).
The handle mount can be replaced.
■Material: Stainless steel

[Compatible models] KAWASAKI ULTRA310LX (-'21) *
*For UNLIMITED UL35003-DAJS, AJS adjustable handle mount series

A plate to relocate the jet sound amplifier unit installed on ULTRA310LX (-'21).
The handle mount can be replaced.
■Material: Stainless steel

[Applicable models] KAWASAKI ULTRA300, 310 (-'21) series
*For UNLIMITED shockless mount (UL35300) only

Installed in the throttle case of ULTRA300, 310 (-'21) series
Plate for relocating the cruise control switch. (For UL35300 only)

By using it when replacing the stock throttle lever with an aftermarket part,
There is no need to remove the cruise control function.
■Material: Stainless steel

[Compatible models] KAWASAKI Kawasaki
For ULTRA310R genuine mount only

A plate to relocate the cruise control switch installed in the throttle case.
Used when replacing the throttle lever on the same model.

■Material: Stainless steel (mirror finish)

For Kawasaki 800X-2 boats equipped with transform hoods

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35003-160] A type that combines a 160mm mount post.

For boats equipped with KAWASAKI 800X-2 lance foam hood

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35300] Type combined with shockless mount.

For Kawasaki 800X-2 boats equipped with transform hoods

evolution steering system
The UNLIMITED steering mount bearing type can be separated into upper and lower parts, so
Can be used in combination with various UNLIMITED steering mounts.
You can use your favorite version!

[Product number: UL35003-DAJS] Type combined with direct adjustable mount.

[Applicable model] KAWASAKI KAWASAKI 800X-2
■Bar clamp: Compatible with 7/8" bar (standard type φ22.2)

Evolution steering system!
Bearing type steering system kit for Kawasaki 800X-2.
By changing the steering stem from the original bush type to a bearing, smooth steering without rattling is possible.
The steering shaft is made of aluminum for maximum strength and rigidity.
In addition, the steering feel using sealed bearings is characterized by smoothness that far exceeds that of the OEM steering mount.

The billet aluminum steering arm has a high-strength aluminum construction with excellent strength and rigidity, and the ball joy attachment position can be adjusted.

Includes lower bearing unit and [UL35003] standard 80mm handle mount kit.
All aluminum parts are anodized for excellent corrosion resistance.

[Information] The following can be used as optional parts.
[UL061] Fat bar clamp
[UL062] Offset clamp

[Compatible models] SEA-DOO SPARK
UNLIMITED billet steering mount (product number: UL35110) optional item

This is the top plate required for installation.

[Compatible models] SEA-DOO 2015 or later, DESS system model
UNLIMITED billet steering mount (product number: UL35110) optional item

The top plate required for installation is a special plate for the new DESS post.

For UNLIMITED adjustable mount (product number: UL35003-AJS)

mount base
■Accessories: Mounting bolts

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts plate only.
You can adjust the mount to your liking by combining the post, base, etc.

【please note】
This product only includes the plate and bolts are not included.

Exclusively for UNLIMITED handle mount kit (product number UL35003)

Repair parts base only.
You can adjust the mount to your liking by combining the post, head, etc.

【please note】
This product only includes the base and bolts are not included.

[Applicable models] KAWASAKI ULTRA series
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310LX/310LX-S

Clamp standard bar (22.4mm diameter) standard equipment

A dedicated set that allows UNLIMITED handle mount (UL35003) to be used with the ULTRA series!

A 160mm optional mount post is installed to lower it to the limit.
This makes it easier to shift the front load to the riding position when cornering, providing a sense of stability in steering.

[Kit contents]
●UL35003 handle mount kit
(Mount, standard bark clamp, cap bolt M8 x 30 x 30 mm),
●UL35003-160 optional mount post 160mm

[Applicable models] KAWASAKI STX160/ULTRA series
STX160LX/160X
ULTRA250X
ULTRA260X/260LX
ULTRA300X/300LX
ULTRA310

A handle mount with a 230mm post.
Due to its height, you can ride with an upright posture, and by raising your line of sight, you can ride with a sense of security and stability.

[Kit contents]
UL35003: Handlebar mount base/handlebar clamp (mounting bolt M8-30 x 4),
*Clamp standard bar (22.2mm diameter) standard equipment
UL35003-230: Optional mounting post 230mm

[Compatible models] KAWASAKI Kawasaki
STX series (750/900/1100/1100DI/STX-R/12F/15F/15S),
900STS
800X-2
■Compatible with standard bar (22.4mm, 7/8")

*Compatibility can be expanded by using optional items.
Can be used with the ULTRA series when used with "UL35003-160 Mount Post 160mm".

The definitive lowdown handle mount!
Succeeded in lowering 100mm from the stock mount.
You can freely adjust the height and bar of your choice!
Systemized based on position 80mm post.
The handle height can be adjusted by changing the optional post, and is compatible with many Kawasaki models.
18 positions can be selected by making the post base and clamp base individually compatible.

[Kit contents]
mount head, mount base
Standard bar (for bar diameter: 22.4mm) clamp
Cap bolt M8×30×30mm
Mount post 80mm

*Second photo... Comparison photo with the genuine one with the mount replaced
*Third photo...Installation image

[Compatible models] YAMAHA NEW SJ (2021) Super Jet

21 Year Handle Pole Spring for Yamaha Superjet A spring that is approximately 70% stronger than the genuine spring.
By installing it, the weight of the handle pole is reduced by 40%, reducing the burden.

[Compatible models]
KAWASAKI STX160LX/STX160

This cover protects the back side of the throttle lever when replacing the steering wheel of the STX160 series.

■Material: Stainless steel

Spare bolt for aluminum lock ring (UL32003) included with UNLIMITED lock grip
*Cannot be used with grips from other manufacturers such as ODI grips.

[Size] M4 x 12mm
[Material] Stainless steel (SUS)

【please note】
*Cannot be used with grips from other manufacturers such as ODI grips.
*Please be careful not to overtorque when tightening.

【correspondence】
KAWASAKI genuine mount (not compatible with some models)
UNLIMITED MOUNT

Standard handlebar 22.4mm diameter

[Material] Aluminum

This is a clamp to hold the handlebars. The clamp is attached at 60.5 degrees. Handlebars
Looking at the installation position from a 60.5° angle, offset it 25 mm upward and 15 mm forward and backward.

[Compatible] Fat bar 28.6mm diameter

*22.4mm handlebar (standard) can also be used with handlebar spacer (product number: UL35002)

[Material] Made of aluminum

Clamp for attaching handlebars.
Since the mounting part is flat, it can be used with Kawasaki genuine mount and UNLIMITED mount.
When installed on the Kawasaki genuine handlebar mount, the handlebar mounting position will be increased by 20mm.

For fat bar (tapered handle) only

■Size: 15cm

【correspondence】
runabout model
Compatible with 28.6mm handle clamp
*A separate fat bar clamp (UL061 recommended) is required for installation.

■Handle diameter: Clamp mounting part 28.6mm,
■Grip lever mounting part 22.±0.2mm

A wide handle with a thick clamp part and excellent flexibility and strength.

●A separate throttle adapter (product number: UL002-) is required for installation.
*Kawasaki…Only models before 1995 can be installed without an adapter.

The shape of the tip provides a finger feel that enables fine throttle work!
It is an angled type with the lever tilted 4 degrees downward.

You can adjust the length of the wire and the weight of the throttle.
UNLIMITED handlebar mount switch case (product number: UL014/UL015) can also be used.

■Machined aluminum
■Angle type 4°

[Compatible model] For Kawasaki 800 X-2 (Freestyle model)

■ For Freestyle model
Compared to the standard model, the height is 10mm higher and can be adjusted 20-30mm backward.

【Compatible Models】For Kawasaki 800 X-2 (Race use)

●For Race use (Race Specification)
50mm lower than the stock model, with 15-25mm of rearward adjustment

【Compatible models】YAMAHA 2015- FX
2015-2021 YAMAHA FX SVHO
2015-2021 YAMAHA FX LTD SVHO
2015-2021 YAMAHA FX HO (1.8L)
2015-2021 YAMAHA FX CRUISER SVHO
2015-2021 YAMAHA FX CRUISER HO (1.8L)
2015 YAMAHA FX SHO (1.8L)

Has superior strength and rigidity compared to the genuine OEM steering system.
The billet stainless steel steering shaft is much stronger than the genuine OEM aluminum shaft.
Cutting-edge race styling. The bar clamp allows for variable height and tilt adjustment.
All common 7/8-inch handlebars can be used.
The billet steering arm features adjustable "quick turn" settings.
Retains the throttle steering system.
All aluminum components are anodized to prevent corrosion.

【Compatible Models】YAMAHA GP1800
2019-2020 YAMAHA GP1800R SVHO
2017-2018 YAMAHA GP1800
2015-2019 YAMAHA VXR (1.8L)
2015-2016 YAMAHA VXS (1.8L)

Offers superior strength and rigidity compared to the OEM steering system.
Billet stainless steel steering shaft is much stronger than the OEM aluminum shaft.
Cutting-edge race styling. Handlebar clamp is adjustable for height and tilt.
Accommodates all common 7/8 inch handlebars.
Billet steering arm features adjustable "quick turn" settings.
Retains the throttle steering system.
All aluminum components are anodized to prevent corrosion.

[Compatible] For ODI grips only. *Cannot be installed on anything other than ODI.

Set includes 2 lock rings and 2 end caps.
Coordinating it with the hull of the boat or other items will make it look stylish.
*Colors not listed as options are sold out*

● Ergonomically designed grip for easier and more aggressive machine control.

● Genuine grip adopted by SEA-DOO since 2016.

● Easy to replace from normal grips on Sea-Doo models from '99 onwards (excluding '14-'15 SPARK).

【Compatibility】Sea-Doo models from '99 onwards (excluding '14-'15 SPARK)

【Contents】1 piece per side. *Two pieces (left and right) are required for one machine.

【Installation】Bolts, washers, inserts, and caps are not included. Please use existing ones.

*The first photo shows both left and right grips.
*If you need a set for one machine, please order one left and one right grip.

【Please read before ordering】
This product is a **manufacturer's取り寄せ商品 (genuine part)**.
As orders are promptly placed with the manufacturer after confirmation, cancellations or changes to order content due to customer convenience are generally not accepted.
Also, depending on the manufacturer's stock status, delivery may take some time. We will inform you of the delivery time as soon as it is confirmed.
Please place your order after acknowledging these points.